A “click” approach to ROMP block copolymers

Amphiphilic block copolymers can be conveniently prepared via convergent syntheses, allowing each individual polymer block to be prepared via the polymerization technique that gives the best architectural control. The convergent “click‐chemistry” route presented here, gives access to amphiphilic diblock copolymers prepared from a ring opening metathesis polymer and polyethylene glycol. Because of the high functional group tolerance of ruthenium carbene initiators, highly functional ring opening metathesis polymerization (ROMP) polymer blocks can be prepared. The described synthetic route allows the conjugation of these polymer blocks with other end‐functional polymers to give well‐defined and highly functional amphiphilic diblock copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2913–2921, 2008     

Block copolymers by transformation of “living” carbocationic into “living” radical polymerization. II. ABA-type block copolymers comprising rubbery polyisobutene middle segment

A general method for the transformation of “living” carbocationic into “living” radical polymerization, without any modification of chain ends, is reported for the preparation of ABA block copolymers. For example, α,ω-difunctional polyisobutene, capped with several units of styrene, Cl-St-PIB-St-Cl, prepared cationically (M_n = 7800, M_w/M_n = 1.31) was used as an efficient difunctional macroinitiator for homogeneous “living” atom transfer radical polymerization to prepare triblock copolymers with styrene, PSt-PIB-PSt (M_n = 28,800, M_w/M_n = 1.14), methyl acrylate, PMA-PIB-PMA (M_n = 31,810, M_w/M_n = 1.42), isobornyl acrylate, PIBA-PIB-PIBA (M_n = 33,500, M_w/M_n = 1.21), and methyl methacrylate, PMMA-PIB-PMMA (M_n = 33,500, M_w/M_n = 1.47). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3595–3601, 1997     

Synthesis of telechelics and block copolymers via “living” radical polymerization

Hydroxy‐telechelic poly(methyl methacrylate)s of molecular weights below 5000 were obtained by atom transfer radical polymerization (ATRP) of methyl methacrylate followed by end‐capping with allyl alcohol via atom transfer radical addition (ATRA). As initiators for the ATRP, monofunctional initiators with an additional hydroxy group in the molecule or bifunctional initiators were employed. The successful synthesis of the hydroxy‐telechelic PMMA was proved by determination of their molecular weight using MALDI‐TOF‐MS. The efficiency of the end‐capping reaction was determined by ¹H NMR spectroscopy using the allyl N‐(4‐tolyl)carbamate as end‐capping agent. Block copolymers comprising a poly(ethylene oxide) (PEO) block and a poly(methyl methacrylate) (PMMA) block were prepared by ATRP using a macroinitiator on the PEO basis. The dormant species of the macroinitiator consists of the phenyl chloroacetate moiety which shows a high rate of initiation. The successful synthesis of the poly(ethylene oxide)‐block‐poly(methyl methacrylate) was proved by ¹H NMR spectroscopy; the ratios of EO/MMA repeating units in the feed and the copolymer were nearly equal.     

Modular synthesis of ABC type block copolymers by “click” chemistry

Heterotelechelic polystyrene (PS), poly(tert‐butyl acrylate) (PtBA), and poly (methyl acrylate) (PMA), containing both azide and triisopropylsilyl (TIPS) protected acetylene end groups, were prepared in good control (M_w/M_n ≤ 1.24) by atom transfer radical polymerization (ATRP). The end groups were independently applied in two successive “click” reactions, that is: first the azide termini were functionalized and, after deprotection, the acetylene moieties were utilized for a second conjugation step. As a proof of concept, PS was consecutively functionalized with propargyl alcohol and azidoacetic acid, as confirmed by MALDI‐ToF MS. In addition, the same methodology was employed to modularly build up an ABC type triblock terpolymer. Size exclusion chromatography measurements demonstrated first coupling of PtBA to PS and, after the deprotection of the acetylene functionality on PS, connection of PMA, yielding a PMA‐b‐PS‐b‐PtBA triblock terpolymer. The reactions were driven to completion using a slight excess of azide functionalized polymers. Reduction of the residual azide groups into amines allowed easy removal of this excess of polymer by column chromatography. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2913–2924, 2007     

Synthesis of amphiphilic polyelectrolyte block copolymers using “living” radical polymerization. Application as stabilizers in emulsion polymerization

This paper describes the synthesis of amphiphilic block copolymers composed of an ionic poly(styrenesulfonate) first segment and a hydrophobic polystyrene second one, using TEMPO-mediated “living” radical polymerization. These copolymers proved to be efficient stabilizers in the emulsion polymerization of styrene.     

Alternating π‐conjugated block copolymers with precise block length

A Sonogashira polycondensation reaction has been used to synthesize copolymers consisting of alternating oligo(p‐phenyleneethynylene) with a precise block length as an electron‐rich component and 1,4‐bis(2‐phenylene‐2‐cyanovinylene)benzene or 2,6‐bis(2‐pyridinylene‐ethynylene)pyridine as an electron‐poor component. The copolymers differ in the length of the phenyleneethynylene block (trimer or pentamer) and the content of the electron‐poor component. The length of the phenyleneethynylene block has no influence on the maximum wavelength. The electron‐poor cyano‐block component lowers the optical band‐gap energy of the copolymers. The value is equivalent to that of poly(cyano‐phenylenevinylene) (CN‐PPV) (2.3–2.4 eV). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3574–3587, 2005     

Atom transfer radical polymerization of hexyl acrylate and preparation of its “all‐acrylate” block copolymers

This investigation reports the polymerization of hexyl acrylate (HA) using atom transfer radical polymerization technique and subsequently the preparation of its di‐ and triblock copolymers with methyl methacrylate. Atom transfer radical polymerization of HA was investigated using different initiators and CuBr or CuCl as catalyst in combination with varying ligands, e.g., 2,2′‐bipyridine and N,N,N′,N″,N″‐pentamethyl diethylenetriamine. Reaction parameters were adjusted to successfully polymerize HA with well‐defined molecular weights and narrow polydispersity indices. The polymerization was better controlled by the addition of polar solvents, which created a homogeneous catalytic system. UV–vis analysis showed that the polar solvent, acetone coordinated with copper (I), changes the nature of the copper catalyst, thereby influencing the dynamic equilibrium of activation–deactivation cycle. This resulted in improved control over polymerization as well as in lowering the polydispersity indices, but at the cost of polymerization rate compared with the bulk process. The presence of ? Br end group in the polymer chains was confirmed by ¹H NMR as well as MALDI‐TOF mass analysis. In addition, poly(hexyl acrylate) was used as macroinitiator to prepare various “all‐acrylate” block (diblock, triblock) copolymers that were characterized by GPC and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3499–3511, 2008     

Alternating,gradient, block,and block–gradient copolymers of ethylene and norbornene by Pd–Diimine‐Catalyzed “living” copolymerization

We demonstrate, in this article, the facile synthesis of a broad class of low‐polydispersity ethylene–norbornene (E–NB) copolymers having various controllable comonomer composition distributions, including gradient, alternating, diblock, triblock, and block–gradient, through “living”/quasiliving E–NB copolymerization facilitated with a single Pd – diimine catalyst ( 1 ). This synthesis benefits from two remarkable features of catalyst 1 , its high capability in NB incorporation and high versatility in rendering E–NB “living” copolymerization at various NB feed concentrations ([NB]₀) while under an ethylene pressure of 1 atm and at 15 °C. At higher [NB]₀ values between 0.42 and 0.64 M, E–NB copolymerization with 1 renders nearly perfect alternating copolymers. At lower [NB]₀ values (0.11–0.22 M), gradient copolymers yield due to gradual reduction in NB concentration, with the starting chain end containing primarily alternating segments and the finishing end being hyperbranched polyethylene segments. Through two‐stage or three‐stage “living” copolymerization with sequential NB feeding, diblock or triblock copolymers containing gradient block(s) have been designed. This work thus greatly expands the family of E–NB copolymers. All the copolymers have controllable molecular weight and relatively low polydispersity (with polydispersity index below 1.20). Most notably, some of the gradient and block–gradient copolymers have been found to exhibit the characteristic broad glass transitions as a result of their possession of broad composition distribution. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Nylon 6–polyisobutylene sequential copolymers. II. Synthesis,characterization, and morphology of di-, tri-, and radial block copolymers

Nylon 6–PIB diblock, triblock, and tristar radial block copolymers have been synthesized from telechelic hydroxyl-terminated polyisobutylene, PIB(OH)_n (n = 1,2,3), by conversion of this prepolymer with hexamethylene diisocyanate (HMDI), toluene diisocyanate (TDI), N-chlorocarbonyl diisocyanate (NCCI), and oxalyl chloride (OxCl) and using the resulting materials as macroactivators for anionic caprolactam polymerization. Prepolymers with molecular weights from 6000 to 38,000 have been employed. Derivatization with NCCI and subsequent anionic caprolactam polymerization gave highest yields and blocking efficiencies. The block copolymers have been characterized by molecular weight and composition. In addition to the expected T_g and T_m characteristics of long PIB and nylon 6 segments, DSC studies showed an intermediate glass transition at ca. ?20°C. Transmission electron microscopy of di-, tri-, and radial blocks show increasing segregation and orientation of rubbery/crystalline domains. Tensile strengths and elongations of the block copolymers range from 16.5 to 41 MPa and 15 to 30%, respectively, and stress-strain diagrams show the effect of block architecture on these properties.     

Theory of block copolymers. I. Domain formation in A–B block copolymers

Microphase separation occurs in many block copolymers to give domain structures. In this first paper in a series dealing with domain formation and the consequences there of, a theory is presented for the formation of spherical domains in A-B block copolymers. The theory establishes criteria for the formation of domains and their size in terms of molecular and thermodynamic variables. It is shown that the considerable loss in configurational entropy due to the constraints on the spacial placement of chains in a domain structure requires that the critical block molecular weights required for domain formation are many-fold greater than required for phase separation of a simple mixture of the component blocks. The relation between domain radius R and molecular dimensions is obtained from the requirement that space in the domain must be filled with a constant density of segments. Segment densities are evaluated from solutions of the diffusion equation, treating the constraints on chain placement as boundary value problems. This gives the relationship R = 4/3 <L²>^1/2, where <L²>^1/2 is the root-mean-square end-to-end chain length. Because of chain perturbations in a domain system, <L²>^1/2 is larger than the unperturbed value $ < {\rm L}^2 > _0^{1/2}$ normally expected for bulk polymers. A means to evaluate the perturbations is shown. The agreement between the predictions of the present theory and the limited published experimental information appears quite satisfactory.     

Structure and stability of Langmuir-Blodgett-Kuhn multilayers containing “hairy-rod” copolymers

The microstructure and thermal stability of Langmuir-Blodgett-Kuhn multilayers containing rod-like polyglutamate copolymers having flexible aliphatic side chains have been studied with x-ray and neutron reflectometry. Upon annealing at 84°C the multilayer structure changes in a manner which is dependent upon the degree of orientation of the rod-like backbones and therefore upon the flow dynamics of the deposition. A sample deposited with a highly convergent flow loses the bilayer structure induced by deposition, whereas samples with less highly aligned backbones may not undergo this relaxation as readily.     

“Living” free radical graft copolymers I: Preparation and properties

Polymers substituted with thio groups are useful for the photochemical synthesis of graft copolymers. Such copolymers have been prepared by the initial conversion of backbone polymers containing chlorinated substituents into polymers containing diethyldithiocarbamate (TC), isopropyl xanthate (IX) or mercaptobenzothiazole (BT) functionality. The photochemical reaction of monomers with these products produced graft copolymers. A variety of halogenated polymers were investigated as starting materials for these syntheses, including poly(vinyl chloride), chlorinated polyvinyl chloride), chlorinated polyethylene, chlorobutyl rubber and neoprene. Characteristics of the grafting reactions, including “pseudo-living” behavior and tandem grafting aspects, were investigated. Glass transitions of the grafted polymers were found to vary uniformly with composition for most of the grafted products.     

“On–off” switching of dynamically controllable self‐assembly formation of double‐responsive block copolymers with tunable LCSTs

We report here a reversible self‐assembly formation system using block copolymers with thermo‐tunable properties. A series of double‐responsive block copolymers, poly(N‐isopropylacrylamide (NIPAAm))‐block‐poly(NIPAAm‐co‐N‐(isobutoxymethyl)acrylamide (BMAAm)) with two lower critical solution temperatures were synthesized by one‐pot atom transfer radical polymerization via sequential monomer addition. When dissolved in aqueous solution at room temperature, the block copolymers remained unimeric. Upon heating above room temperature, the block copolymers self‐assembled into micellar structures. The micelle formation temperature and the resulting diameter were controlled by varying the BMAAm content. ¹H Nuclear Magnetic Resonance, dynamic light scattering, field‐emission scanning electron microscopy, and fluorescence spectra revealed the presence of a monodisperse nanoassembly, and demonstrated the assembly formation/inversion process was fully reversible. Moreover, a model hydrophobic molecule, pyrene, was successfully loaded into the micelle core by including pyrene in the original polymer solution. Further heating resulted in mesoscopic micelle aggregation and precipitation. This dual micelle and aggregation system will find utility in drug delivery applications as a thermal trigger permits both aqueous loading of hydrophobic drugs and their subsequent release. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Evolution of the “knitting pattern” morphology in ABC triblock copolymers

A new morphology of ternary ABC triblock copolymers is presented which results from the asymmetric interaction between a centre block (poly(ethylene-co-butene)) to different end blocks (polystyrene and poly(methyl methacrylate)). This morphology with the appearance of a “knitting pattern” can be described as an intermediate of a morphology of A, B and C lamellae and a morphology of A and C lamellae with B cylinders at the A/C interface.     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012