Imide-aryl ether ketone block copolymers

Imide-aryl ether ketone block copolymers were prepared and their morphology and thermal and mechanical properties investigated. Two aryl ether ketone blocks were incorporated; the first was an amorphous block derived from bisphenol–A and the second block was a semi-crystalline poly(aryl ether ether ketone) prepared from a soluble and amorphous ketimine precursor. Bis(amino) aryl ether ketone and aryl ether ketimine oligomers were prepared via a nucleophilic aromaic substitution reaction with molecular weights ranging from 6,000 to 12,000 g/mol. The oligomers were co-reacted with 4,4′-oxydianiline (ODA) and pyromellitic dianhydride (PMDA) diethyl ester diacyl chloride in N-methyl–2-pyrrolidone (NMP) in the presence of N-methylmorpholine. The copolymer compositions, determined by H-NMR, of the resulting amic ester based copolymers ranged from 8 to 50 wt % aryl ether ketone or ketimine content. Prior to imide formation, the ketimine moiety of the aryl ether ketimine block was hydrolyzed (p-toluene sulfonic acid) to the ketone form producing the aryl ether ether ketone block. Compositions of this block were maintained low to retain solubility. Solutions of the copolymers were cast and cured to effect imidization, producing clear films with high moduli (ca. 2200 MPa) and elongations (33–100%). The copolymers displayed good thermal stability with decomposition temperatures in excess of 450°C. Multiphase morphologies were observed irrespective of the co-block type, block length or composition. © 1992 John Wiley & Sons, Inc.     

双邻位甲基侧基聚芳醚酮醚酮酮/聚芳醚醚酮酮的合成与表征

聚芳醚醚酮酮(PEEKK)是继聚芳醚醚酮(PEEK)之后,由德国Hoechst公司开发出来的又一种全芳香结构热塑性耐高温特种工程塑料,由于PEEKK分子链规整性好,熔融温度高,加工成型非常困难,且具有极好的耐溶剂性,只能在浓硫酸等少数溶剂中可以溶解,使其应用受到了一定的限制,人们常常在主链上引入不同的大的基团(如萘环、二氮杂萘酮)、     

Fully aromatic poly(ether ketone)s bearing macrocycle pendants: Synthesis and crosslinking

This study reports a method to prepare fully aromatic poly(ether ketone) thermosets. The cyclization of 2′,5′‐dimethoxy[1,1′‐biphenyl]‐2,5‐diol and a difluoro monomer was carried out under pseudo high dilution condition. Two types of fully aromatic poly(ether ketone)s with macrocycle were successfully prepared by copolymerization of macrocycle of aryl ether ketone containing hydroxyphenyl groups, 4,4′‐(hexafluoroisopropylidene)diphenol (HFBPA), and 4,4‐difluorobenzophenone. The obtained copolymers have high molecular mass, good solubility, and high glass transition temperatures in the presence of CsF, the crosslinking reaction of copolymers occurred and afforded fully aromatic thermoset poly(aryl ether ketone)s by ring‐opening reaction driven by entropy. After crosslinking, these copolymers show much higher glass transition temperatures, excellent thermal stability, and better mechanical strength. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7002–7010, 2008     

主链芳香型刚性链聚醚酮（砜）分子结构与其热性能的研究

通过模型化合物ＡｒＯＡｒＣＯＡｒＡｒＣＯＡｒＯＡｒ（Ａｒ为苯基或１，４－亚苯基）的全优化模型，得到芳环之间的平均二面角为３７．５°，由其结构参数建立了刚性链聚芳醚酮（砜）类均聚物分子结构与其熔点及玻璃化温度的关系式，据此较好地了预测了新品种均聚物的热性能。     

Effect of crystal-disrupting chlorohydroquinone on the first-order transitions of poly(aryl ether ketone)s containing biphenyl units

The novel poly(aryl ether ketone)s were synthesized by nucleophilic substitution reactions of 4,4′-difluorobenzophenone with 4,4′-biphenyldiol and chlorohydroquinone. As expected, the copolymers have lower melting transitions than the biphenyldiol-based homopoly(aryl ether ketone) because of the copolymerization effect of the crystal-disrupting monomer chlorohydroquinone. Copolymers containing 50 and 70% biphenyldiol show two first-order transitions which are associated with the crystal-to-liquid crystal transition and the liquid crystal-to-isotropic transition.     

Synthesis and Properties of Poly(Aryl Ether Ketone) Copolymers with Trifluoromethyl‐Substituted Benzene in the Side Chain

The new monomer (4‐(4′‐trifluoromethyl)phenoxyphenyl)hydroquinone (TFPOPH) was synthesized in a three‐step synthesis. A series of poly(aryl ether ketone) copolymers were prepared by the reaction of (4‐(4′‐Trifluoromethyl)phenoxyphenyl)hydroquinone and hydroquinone (HQ) with 4,4′‐difluorobenzophenone (DFB) in the presence of potassium carbonate in tretramethylene sulfone (TMS). Thermal analyses of the fluorinated copolymers showed that the glass transition temperature and 5.0% weight loss temperature are similar with that of PEEK, and the crystallinity decreased with increasing of TFPOPH. For the copolymer synthesized with the molar fraction of TFPOPH in the diphenol monomers (TFPOPH, HQ) being over 0.2, no cold crystallization temperature and melting temperature were detected, indicating that these copolymers are almost amorphous. The crystal structure of the copolymers with the molar fraction of TFPOPH being not higher than 0.2 is rhombic. The solubility in polar aprotic solvents of poly(aryl ether ketone)s copolymers increases and dielectric constant decreases step by step.     

氟取代聚芳醚酮低温合成及其结构研究

通过傅克酰基化反应合成4,4'-二(4-氟苯甲酰基)二苯醚、4,4'-二(五氟苯甲酰基)二苯醚、4,4'-二(4-氟苯甲酰基)二苯硫醚以及4,4'-二(五氟苯甲酰基)二苯醚4种长链双卤单体,并进一步制备了含二氮杂萘酮聚芳醚酮聚合物.通过多氟取代双卤单体在含二氮杂萘酮聚芳醚酮聚合物主链中引入氟原子.多氟取代双卤单体具有多...     

聚芳醚酮树脂的分子设计与合成及性能

聚芳醚酮树脂是20世纪发展起来的重要特种工程塑料.因其优良的耐热、耐腐蚀、耐摩擦及生物相容性好等特点,在国防军工、武器装备、航空航天、电子、汽车、机械、石油工业、核能及理疗卫生等高技术领有广泛的应用.此类材料大都采用双酚单体和双氟单体通过A2+B2型亲核缩聚反应制备.这类聚合物的分子结构对材料的性能影响较大,一般情况下分子链由醚、酮、苯三元规整结构构成时,聚合物为半结晶态;然而,当分子结构中存在侧基或其他非规整结构往往破坏聚合物的结晶结构,聚合物呈现无定型态.半结晶聚芳醚酮聚合物具有非常优异的耐热、耐化学稳定性一般作为结构型材料使用;无定型聚芳醚酮具有良好的加工性能,并且可进行一些功能化成为一类优异的功能型材料.本文从结构与性能关系出发,介绍了聚芳醚酮树脂种类,聚芳醚酮树脂的发展历程及合成方法;探讨了聚芳醚酮材料结构与性能关系;总结了功能性聚芳醚酮材料的前沿进展;最后结合实际展望了聚芳醚酮的应用发展方向.     

Preliminary communication - The synthesis and thermotropic liquid crystalline behaviour of novel main chain poly(aryl ether ketone)s containing a lateral phenyl group

Novel main chain poly(aryl ether ketone)s containing a lateral phenyl group were synthesized by nucleophilic substitution reactions of 4,4-biphenol and phenylhydroquinone with either 4,4-difluorobenzophenone or 1,4-bis(4-fluorobenzoyl)benzene and their thermotropic liquid crystalline properties were characterized by a variety of experimental techniques. Thermotropic liquid crystalline behaviour was observed in the copolymers containing 50 and 70 mol% biphenol. Melting (Tm) and isotropization (Ti) transitions both appeared on the DSC thermograms. A banded texture was formed after shearing the sample in the liquid crystalline nematic state. As expected, each of the copolymers had a relatively lower melting transition than the biphenol-based homopoly(aryl ether ketone)s because of the copolymerization effect of the crystal-disrupting monomer phenylhydroquinone.     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Preliminary communication - The synthesis and thermotropic liquid crystalline behaviour of novel main chain poly(aryl ether ketone)s containing a lateral phenyl group

Novel main chain poly(aryl ether ketone)s containing a lateral phenyl group were synthesized by nucleophilic substitution reactions of 4,4-biphenol and phenylhydroquinone with either 4,4-difluorobenzophenone or 1,4-bis(4-fluorobenzoyl)benzene and their thermotropic liquid crystalline properties were characterized by a variety of experimental techniques. Thermotropic liquid crystalline behaviour was observed in the copolymers containing 50 and 70 mol% biphenol. Melting (Tm) and isotropization (Ti) transitions both appeared on the DSC thermograms. A banded texture was formed after shearing the sample in the liquid crystalline nematic state. As expected, each of the copolymers had a relatively lower melting transition than the biphenol-based homopoly(aryl ether ketone)s because of the copolymerization effect of the crystal-disrupting monomer phenylhydroquinone.     

一种全芳香热致液晶聚芳醚酮

聚芳醚酮由于熔融粘度大和加工温度高而影响了其进一步工业化，因此降低熔融粘度和加工温度是研究聚芳醚酮的新课题[1]．目前在工程塑料中热致液晶高分子是一种具有低熔融粘度而性能优异的材料，其熔融粘度比一般高分子材料低得多，并且具有优异的机械性能[2]本文采用无现...     

氧化偶联聚合方法合成电活性聚芳醚酮

通过氧化偶联聚合方法成功地合成出电活性聚芳醚酮. 该反应条件温和, 操作简单, 室温下即可进行. 用红外光谱、核磁共振谱、高效凝胶渗透色谱、循环伏安、热失重、X射线衍射等技术对所合成的聚合物进行了表征, 并探讨了聚合物的性能.     

含羧酸酯侧基的聚芳醚酮酮醚酮酮的合成与表征

以含羧基侧基的聚芳醚酮酮醚酮酮(PEKKEKK-A)树脂为原料,二氯亚砜(SOCl2)、二氯乙烷(DCE)、吡啶为催化溶剂体系,合成带甲酰氯侧基的聚芳醚酮酮醚酮酮(PEKKEKK-C)树脂.PEKKEKK-C与甲醇、乙醇、丁醇、辛醇、苯酚等发生酯化反应,得到5种含羧酸酯侧基的聚芳醚酮酮醚酮酮(PEKKEKK-E)s.用红外光谱(FTIR)、氢核磁谱(1H-NMR)、广角X射线衍射(WAXD)、热失重(TGA)、示差扫描量热(DSC)等技术对其结构与性能进行了分析表征.结果表明,聚合物为非晶聚集态;玻璃化转变温度(Tg)在175.7～236.8℃之间,较PEKK有较大幅度提高;出现两次热失重平台,分别在335～365℃,460～505℃之间,第一次失重可能由于酯分解所致,第二次失重可能是分子主链开始分解;树脂能溶解于DMAc、NMP、二氯甲烷等普通有机溶剂中,溶剂挥发后成膜性良好,可制成透明薄膜;断裂伸长率在6.34%～15.43%之间,拉伸强度在74.68～85.35MPa之间。     

一种杂环磺化聚芳醚腈酮质子交换膜材料的合成及表征

用含二氮杂萘酮结构类双酚DHPZ,3,3′-二磺酸钠基-4,4′-二氟二苯酮,2,6-二氯苯腈以及4,4′-二氟二苯酮,通过缩合共聚合反应合成了一系列不同磺化度、高分子量的磺化聚芳醚腈酮.聚合物特性粘数为0·58~2·0dL/g.用红外光谱(FT-IR),核磁共振谱(1H-NMR)表征了聚合物结构.用差示扫描量热仪(DSC)和热重分析仪(TGA)研究了聚合物的耐热性能,研究表明其玻璃化温度(Tg)可达352℃,5%热失重温度大于500℃.以N-甲基吡咯烷酮为溶剂,溶液浇铸法制备了聚合物膜,并测定了膜的溶胀率以及质子交换能力.结果表明,与Nafion膜相比,磺化聚芳醚腈酮膜在相同的质子交换能力条件下,溶胀率显著降低.     

Structure‐controlled synthesis of novel soluble and thermally stable poly (aryl ether nitrile ether ketone ketone)/poly (aryl ether nitrile ether ketone biphenyl ketone) copolymers by electrophilic polycondensation

One new synthesis route was first designed to synthesize the biphenyl acid chloride (BPACl), and then a series of novel poly (aryl ether nitrile ether ketone ketone) (PENEKK)/poly (aryl ether nitrile ether ketone biphenyl ketone) (PENEKBK) copolymers with different controlled structure compositions were synthesized by electrophilic polycondensation and varying the molar ratio of BPACl to terephthaloyl chloride (TPC). The obtained PENEKK/PENEKBK copolymers were characterized by different physical and chemical techniques. The results showed, the copolymers with 10–50% molar contents of biphenyl moities exhibited good thermal properties with glass transition temperatures (T_gs) of 184–196°C, decomposition temperatures (T_ds) of 498–515°C, and good solubility in organic solvents (N‐Methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), and DMSO), indicating that they would have good potential for solvent processing. The thin films of the polymers had tensile strengths of 93.6–101.5 MPa, Young's moduli of 3.03–3.32 GPa, elongations at break of 9–14%, indicating they were strong materials. The densities of the obtained polymers were 1.31–1.40 g/cm^?3, which were far lower than those of some main inorganic materials (such as Fe, nearly 7.8 g/cm^?3), indicating that they would have possible potential for substituting some inorganic materials used as high temperature materials in some areas due to the merits of lightweight. Thus, the copolymers with 10–50% molar contents of biphenyl moities were promising polymer materials. Copyright © 2010 John Wiley & Sons, Ltd.     

含氟聚芳醚酮的合成与性能研究

研究了含氟基团的引入对聚醚醚酮(PEEK)的介电常数、溶解性、结晶性和力学性能等的影响.结果表明,这种含氟聚芳醚酮在保持PEEK良好机械性能的条件下,介电常数达到2.7,且频率依赖性小,成膜性能好,成本比相应的含氟PI低5～10倍,有望成为一种极有实用价值的电子封装材料.同时利用合成的含氟单体合成了一系列不同-CF₃取代基含量的聚芳醚酮共聚物,研究了聚芳醚酮共聚物的介电常数与聚合物结构单元中-CF₃取代基含量的关系.结果表明,聚芳醚酮共聚物的介电常数随聚合物结构单元中-CF₃取代基含量的增加而线性降低.     

Synthesis and characterization of novel poly（aryl ether sulfone ketone）s containing phthalazinone and biphenyl moieties

A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996     

高Tg含萘聚芳醚酮的合成与性能

利用Friedel-Craft和去醚化反应成功地制备了具有对称取代结构的含萘双酚单体1,5-二(3-甲基)苯羰基-2,6-二羟基萘, 并且通过高温亲核取代反应制得了两种高分子量的芳香族聚合物, 对这两种新型聚合物的热性能、溶解性能、机械性能及介电常数等进行了表征.