Morphologies of micron-sized monodispersed composite polymer particles having crosslinked structures produced by seeded polymerizations

Three kinds of micron-sized monodispersed polystyrene (PS)/ poly(styrene - divinylbenzene) composite particles were produced by two kinds of seeded copolymerizations of styrene (S) and divinylbenzene (DVB) (PS seed/ (S+DVB)=2/1, wt. ratio; S/DVB=1/1, molar ratio) in the presence of about 2 μm-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion copolymerization where almost monomers and initiators exist in an ethanol/water (12.6/4.0, w/w) medium. The others two were produced by seeded copolymerizations with the dynamic swelling method where almost monomers exist in the monomer-swollen particles using 2, 2'-azobisisobutyronitrile in monomer-swollen PS seed particles or using 4, 4'-azobis (4-cyanopentanoic acid) in an ethanol/water (7/43, w/w) medium. In the former polymerization, the produced composite particles had a high dense crosslinked shell, whereas in the latter two polymerizations, they did the comparatively homogeneous crosslinked structures.     

Production of micron-sized monodispersed core/shell composite polymer particles by seeded dispersion polymerization

 The effect of the weight ratio of seed polymer/monomer on the morphology of the poly(methyl methacrylate) (PMMA)/polystyrene (PS) monodispersed composite particles produced by batch seeded dispersion polymerization of styrene with 1.64-μm-sized monodispersed PMMA seed particles in a methanol/water medium (4/1 w/w) was examined. In the PMMA/PS weight ratios of 3/1 and 2/1, the composite particles had a clear morphology consisting of a PMMA core and a PS shell. In the ratio of 1/1, a lot of small PS domains were observed in the PMMA core though the PS shell was still formed. By stepwise addition of styrene monomer, the formation of the small PS domain was depressed and complete core/shell morphology was formed. Absorption/release treatments of toluene into/from the PMMA/PS (1/1 w/w) composite particles resulted in a drastic morphological change from the core/shell structure to a multi- layered one. Received: 2 February 1999 Accepted in revised form: 7 April     

Production of micron-sized monodispersed polymer particles by seeded polymerization for the dispersion of highly monomer-swollen particles prepared with submicron-sized polymer seed particles utilizing the dynamic swelling method

For the purpose of extending the size range of polymer seed particles used in “dynamic swelling method” (DSM), first it was verified theoretically that the submicron-sized polymer particles produced by emulsion polymerization can also absorb a large amount of monomer by DSM in both equilibrium and kinetic control states. Next, on the basis of the theoretical results, experimentally about 2.6 μm-sized styrene-swollen polystyrene (PS) particles were prepared utilizing DSM in the presence of 0.64 μm-sized monodispersed PS seed particles produced by emulsifier-free emulsion polymerization. Moreover, 2.5 μm-sized monodispersed PS particles were produced by the addition of cupric chloride as a water-soluble inhibitor to depress the by-production of submicron-sized PS particles in the seeded polymerization at 30°C with 2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) initiator. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2513–2519, 1998     

Micron-sized monodispersed polymer particles produced by seeded polymerization for the dispersion of high swelling of polymer particles with a large amount of monomer

 Micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) composite particles were produced as follows. First, 1.77 μm-sized monodispersed PS seed particles produced by dispersion polymerization were dispersed in ethanol/water (1/2, w/w) medium dissolving poly(vinyl alcohol) as a stabilizer. n-Butyl methacrylate (BMA) monomer dissolving benzoyl peroxide initiator was emulsified in ethanol/water (1/2, w/w) solution of sodium dodecyl sulfate as emulsifier with ultrasonic homogenizer, and the BMA monomer emulsion was mixed with the PS seed emulsion. The PS seed particles absorbed with a large amount of BMA (about 150 times weight of the seed particles) for 2 h to about 10 μm in diameter while keeping good monodispersity and BMA droplets disappeared finally. The seeded polymerization was carried out at 70 °C after a certain amount of water was added to depress the redissolving of BMA from the swollen particles into the medium by raising from room temperature to the polymerzation temperature. Received: 21 February 1996 Accepted: 4 September 1996     

Production of micron-sized, monodispersed, multilayered composite polymer particles by multistep seeded dispersion polymerization

 Micron-sized, monodispersed, poly(methyl methacrylate) (PMMA)/polystyrene (PS)/PMMA/PS multilayered composite particles were successfully produced by three-step seeded dispersion polymerizations in methanol/water media. The first seeded dispersion polymerization was carried out with 2-μm-sized, monodispersed PMMA particles.     

Morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

 Monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles having 9.4 μm in diameter were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles, and their morphologies were examined. The highly BMA-swollen PS particles (about 150 times the weight of the PS seed particles) were prepared by mixing monodispersed 1.8 μm-sized PS seed particles and 0.7 μm sized BMA droplets prepared with an ultrasonic homogenizer in ethanol/water (1/2, w/w) medium at room temperature. After NaNO₂ aqueous solution as inhibitor was added in the dispersion, the seeded polymerization was carried out at 70 °C. In an optical microscopic observation, one or two spherical high contrast regions which consisted mainly of PS were observed inside PS/PBMA composite particles. In the PS domain, there were many fine spherical PBMA domains. Such morphologies were based on the phase separation of PS and PBMA within the homogeneous swollen particles during the seeded polymerization. Received: 04 June 1997 Accepted: 27 August 1997     

Preparation of micron-sized monodispersed highly monomer- “adsorbed” polymer particles having snow-man shape by utilizing the dynamic swelling method with tightly cross- linked seed particles

Micron-sized, monodispersed highly styrene-“adsorbed” particles having snow-man shape were prepared by the dynamic swelling method (DSM) with tightly cross-linked polymer seed particles as follows. First, 3.8 μm-sized monodispersed polystyrene (PS)/ poly(divinylbenzene) (PDVB) (PS/PDVB = 1/10 wt. ratio) composite particles produced by seeded polymerization utilizing DSM were dispersed in an ethanol/water (6/4, w/w) solution dissolving styrene monomer, and poly(vinyl alcohol) as a stabilizer. Second, water was subsequently added to the dispersion with a micro-feeder at a rate of 2.88 ml/h at room temperature. The cross-linked seed particles adsorbed a large amount of styrene onto the surfaces and resulted in mono-dispersed highly styrene-“adsorbed” snow-man shape particles having about 10 μm in diameter. Received: 16 April 1998 Accepted: 9 June 1998     

Production of core/shell polystyrene/poly(3,5-xylidine) composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized monodispersed polystyrene (PS)/poly(3,5-xylidine) (PXy) composite particles were produced by chemical oxidative seeded dispersion polymerization of 3,5-xylidine at 20 °C with 1.6-μm-sized monodispersed PS seed particles in HCl aqueous solution, the pH of which was always kept at 2.5 with a pH stat. The composite particles produced consisted of a PS core and a PXy shell. Received: 16 December 1998 Accepted in revised form: 25 March 1999     

Influence of the swelling state of seed polymer particles with monomer on the morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization utilizing the dynamic swelling method

 Micron-sized mono-dispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/PBMA=2/1 by weight) having a heterogeneous structure in which many fine PBMA domains dispersed in a PS matrix near the particle surface were produced by seeded polymerization of n-butyl methacrylate (BMA) of which almost all had been absorbed by 1.8 μm-sized monodispersed PS seed particles utilizing the dynamic swelling method. The morphology was varied by changing the PS/BMA ratio and polymerization temperature. It was concluded that the swelling state of 2 μm-sized BMA-swollen PS particles in the seeded polymerization process is one of the important factors to control the morphology of the composite particles. Received: 27 November 1996 Accepted: 21 March 1997     

Influences of the locations of monomer and initiator in the seeded polymerization systems on the morphologies of micron-sized monodispersed composite polymer particles

Three kinds of micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/BMA=2/1, wt. ratio) were produced by two kinds of seeded polymerizations ofn-butyl methacrylate (BMA) in the presence of about 2 m-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion polymerization where almost monomers and initiators exist in an ethanol/water (1/1, w/w) medium. The others two were produced by seeded polymerizations utilizing the dynamic swelling method, where almost monomers exist in the PS seed particles, with 2,2-azobisisobutyronitrile initiator in the monomer-swollen particles and with 2,2-azobis [2-(2-imidazolin-2-yl)propane] initiator in an ethanol/water (1/5, w/w) medium. In the former polymerization, the produced composite particles had a core-shell structure consisting of a PS-core and a PBMA-shell, whereas in the latter two polymerizations, they had a POO (Polymeric Oil-in-Oil) structure consisting of a PS-matrix and many PBMA-domains, regardless of the location of initiator in the systems. From these results, it is concluded that the location of BMA monomer in the seeded polymerization systems with micron-sized monodispersed PS seed particles greatly affects the morphologies of produced PS/PBMA composite particles.Part CLI of the series Studies on Suspension and Emulsion     

Morphology of micron-sized monodispersed poly(butyl methacrylate)/polystyrene composite particles produced by seeded dispersion polymerization

In order to develop the seeded dispersion polymerization technique for the production of micron-sized monodispersed core/shell composite polymer particles the effect of polymerization temperature on the core/shell morphology was examined. Micron-sized monodispersed composite particles were produced by seeded dispersion polymerizations of styrene with about 1.4-μm-sized monodispersed poly(n-butyl methacrylate) (Pn-BMA) and poly(i-butyl methacrylate) (Pi-BMA) particles in a methanol/water (4/1, w/w) medium in the temperature range from 20 to 90 °C. The composite particles, PBMA/polystyrene (PS) (2/1, w/w), consisting of a PBMA core and a PS shell were produced with 2,2′-azobis(4-methoxy-2,4-dimethyl valeronitrile) initiator at 30 °C for Pn-BMA seed and with 2,2′-azobis(isobutyronitrile) initiator at 60 °C for Pi-BMA seed. The polymerization temperatures were a little above the glass-transition temperatures (T _g) of both Pn-BMA (20 °C) and Pi-BMA (40 °C). On the other hand, when the seeded dispersion polymerizations were carried out at much higher temperatures than the T _g of the seed polymers, composite particles having a polymeric oil-in-oil structure were produced. Received: 14 October 1998 Accepted in revised form: 2 June 1999     

Production of electrically conductive, core/shell polystyrene/polyaniline composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized, monodispersed, electrically conductive polystyrene (PS)/polyaniline (PAn) composite particles were produced by chemical oxidative seeded dispersion polymerization of aniline at 0 °C with 1.37-μm-sized, monodispersed PS seed particles in HCl aqueous solution, where the pH value was kept at 2.5 with a pH stat. The composite particles consisted of a PS core and a PAn shell. A pellet of the composite particles had a conductivity of 3.4 × 10⁻³ S/cm. Received: 5 April 2000 Accepted: 10 August 2000     

Production of micron-sized monodispersed core/shell polymethyl methacrylate/polystyrene particles by seeded dispersion polymerization

 Micron-sized monodispersed polymethyl methacrylate (PMMA)/polystyrene (PS) (PMMA/PS=2/1, wt ratio) composite particles consisting of PMMA-core and PS-shell were successfully produced by seeded dispersion polymerization of styrene in a methanol/water medium in the presence of about 2 μm-sized monodispersed PMMA particles. From the view point of thermodynamic equilibrium, such a morphology is difficult to form by usual seeded polymerization in a polar medium such as water. It is concluded that seeded dispersion polymerization in which almost all monomers and initiators exist in the medium has an advantage to produce core/shell polymer particles in which polymer layers accumulate in their order of the production regardless of the hydrophobicity of polymers, because of high viscosity in polymerizing particles. Received: 9 December 1996 Accepted: 26 February 1997     

Production of micron-sized, monodispersed, multihollow polystyrene/poly(3,5-xylidine) composite particles by chemical oxidative seeded polymerization

 Micron-sized, monodispersed polystyrene/poly(3,5-xylidine) composite polymer particles were produced by chemical oxidative seeded polymerization of 3,5-xylidine with 1.37-μm-sized, monodispersed polystyrene seed particles. The chemical oxidative seeded polymerization was conducted in an aqueous medium at 25 °C in the presence of poly(vinyl alcohol) as a stabilizer using ammonium persulfate as an oxidant. The composite particles had a multihollow structure. Received: 30 June 1999/Accepted in revised form: 21 October 1999     

Preparation of micron-size monodisperse polymer particles having highly crosslinked structures and vinyl groups by seeded polymerization of divinylbenzene using the dynamic swelling method

Micron-size monodisperse polystyrene/polydivinylbenzene (PS/PDVB) composite particles having highly crosslinked structures and vinyl groups were prepared as follows. First, 1.9 m-size monodisperse PS seed particles produced by dispersion polymerization were dispersed in ethanol/water (70/30, w/w) solution which dissolved divinylbenzene (DVB) monomer, benzoyl peroxide as an initiator and poly(vinyl alcohol) as a stabilizer. The PS seed particles were swollen with a large amount of DVB monomers to 4.3 m in diameter while keeping good monodispersity by the dynamic swelling method, where water was slowly added, continuously, with a micro feeder into the dispersion. And then, the seeded polymerization of the absorbed DVB was carried out.Part CXXXV of the series Studies on Suspension and Emulsion     

Seed Dispersion Polymerization to Micron-Size Monodisperse Polymer Particles

Abstract

Seed dispersion polymerization of methyl methacrylate (MMA) in the presence of monodisperse PMMA particles was carried out in an aqueous methanol using poly(methacrylic acid) stabilizer. The polymerization using 2. 5 μ. m-sized seed particles gave monodisperse PMMA particles in the diameter up to 4. 9 μm. The solvent composition and monomer concentration greatly affected the polymerization behavior. Under appropriate conditions, monodisperse PMMA particles in the diameter up to 8. 9 μ, m was prepared from 4. 6 μm-sized seed particles. The seed dispersion polymerization of styrene in the presence of the seed particles produced monodisperse PMMA-polystyrene particles in the micron range. The particles were supposed to have a structure consisting of PMMA-core and polystyrene-shell from ESCA analysis.     

反相浓乳液方法制备聚苯乙烯/二乙烯基苯结构型泡孔聚合物

通过反相浓乳液聚合方法制备了系列聚苯乙烯/二乙烯基苯(PS/DVB)泡孔聚合物.水作为分散相,其分散相体积分数可达90%;苯乙烯单体作为连续相,聚合后构成PS/DVB泡孔聚合物的结构骨架.用扫描电镜系统研究了乳化剂的浓度、分散相体积分数、添加不同沸点的溶剂等对泡孔聚合物断面形态的影响,并考察了泡孔聚合物对水和柴油的吸附情况.结果表明,不同工艺条件下可以制备出不同孔径的泡孔聚合物,加入不同沸点溶剂使得泡孔壁也形成了多孔结构.     

Formation of multihollow structures in crosslinked composite polymer particles

Micron-size monodisperse polymer particles having multihollow structures were prepared as follows. First, micron-size monodisperse polystyrene/poly(styrene-divinylbenzene) (PS/P(S-DVB)) composite particles were produced by seeded copolymerization of S and DVB with 2,2-azobisisobutyronitrile as an initiator in the ethanol/water (76/24, weight ratio) medium in the presence of 2.37 m-size monodisperse PS seed particles produced by dispersion polymerization. The molar ratio of S/DVB was changed in the range of 1/110/1. The uncrosslinked polymer within the composite particles was extracted with toluene under reflux. For the highest DVB content (S/DVB=1/1, molar ratio), one large hollow was observed in a part of the composite particles after the extraction. For the middle DVB content (S/DVB=4/1, molar ratio), multihollow structure was observed in all the particles. For the lowest DVB content (S/DVB=10/1, molar ratio), fine multihollow structure was observed in all the particles.Part CXLIII of the series Studies on Suspension and Emulsion     

Influence of the kind of end groups of polysterene on the production of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving them

Suspension polymerizations for divinylbenzene (DVB)/ toluene droplets dissolving polystyrene (PS) having different end groups were carried out. Hollow polymer particles were not obtained with PS having polar sulfate end groups, which were prepared by emulsifier-free emulsion polymerization with potassium persulfate initiator. On the other hand, they were obtained with PS having low polarity isobutyronitrile end groups, which were prepared by solution polymerization with 2,2′-azobis(isobutyronitrile) initiator. The interfacial tensions between the water and xylene/toluene (1/1, w/w) mixture solution of PS having polar groups was smaller than that having low polarity groups. From these results, it is concluded that the preferential adsorption of PDVB molecules formed by the suspension polymerization at the interface of the droplets over PS molecules, which depended on the kind of the end groups, is one of the key factors for the formation of the hollow structure. Received: 5 September 2000 Accepted: 13 December 2000     

Preparation of micron-sized, monodisperse poly(methyl methacrylate)/polystyrene composite particles having a large number of dents on their surfaces by seeded dispersion polymerization in the presence of decalin

Seeded dispersion polymerization of styrene with 1.77-µm-sized, monodisperse poly(methyl methacrylate) seed particles was carried out in a methanol/water medium (8/2, w/w) in the presence of decalin droplets. The monodisperse poly(methyl methacrylate)/polystyrene composite particles produced had a large number of dents on their surfaces. The effects of the amount of decalin in the polymerization system on the number, the diameter, and the depth of the dents on the surface of the composite particles were clarified.