表面氢化的双层氮化硼的结构和电子性质

采用第一性原理方法研究了表面氢化的双层氮化硼的结构和电子性质.考虑了表面氢化的双层BN可能存在的六种主要构型,计算结果表明:AB-BN和AA-BN两种构型最为稳定.进一步分析了氢化后的双层BN最稳定构型的能带和电子性质.AB-BN和AA-BN两种构型的原子薄片均为直接带隙半导体,GGA计算的带隙值分别为1.47 eV和1.32 eV.因为GGA通常严重低估带隙值,采用hybrid泛函计算得到带隙值分别为2.52eV和2.34 eV.在最稳定的AB-BN和AA-BN两种构型中,B-N键呈现共价键,而B-H和N-H则具有明显的离子键的特点.在双轴应变下氢化双层BN原子薄片可以被连续地调节带隙,当晶格常数被压缩约8%时,原子薄片由半导体性转变为金属性.     

Chemically decorated boron-nitride nanoribbons

Motivated by recent studies of graphenen nanoribbons (GNRs), we explored electronic properties of pure and chemically modified boron nitride nanoribbons (BNNRs) using the density functional theory method. Pure BNNRs with both edges fully saturated by hydrogen are semiconducting with wide band gaps. Values of the band gap depend on the width and the type of edge. The chemical decoration of BNNRs’ edges with four different functional groups, including -F, -Cl, -OH, and -NO₂, was investigated. The band-gap modulation by chemical decoration may be exploited for nanoelectronic applications.      

A first-principles investigation on the effect of the divacancy defect on the band structures of boron nitride (BN) nanoribbons

On the basis of the comprehensive first-principles computations, we investigated the geometries, electronic and magnetic properties of zigzag and armchair boron nitride nanoribbons (BNNRs) with the divacancy defect of 5–8–5 ring fusions formed by removing B–N pair, where the defect orientation and position are considered. Our computed results reveal that all of the defective BNNRs systems can uniformly exhibit nonmagnetic semiconducting behavior, and the formation of the divacancy 5–8–5 defect can significantly impact the band structures of BNNRs with not only the zigzag but also armchair edges, where their wide band gaps are reduced and the defect orientation and position play an important role. Clearly, introducing divacancy defect can be a promising and effective approach to engineer the band structures of BNNRs, and the present computed results can provide some valuable insights for promoting the practical applications of excellent BN-based nanomaterials in the nanodevices.     

Carbon nanoribbons and nanotubes based on δ-graphyne: A first-principles study

As a stable allotropy of two-dimensional (2D) carbon materials, δ-graphyne has been predicted to be superior to graphene in many aspects. Using first-principles calculations, we investigated the electronic properties of carbon nanoribbons (CNRs) and nanotubes (CNTs) formed by δ-graphyne. It is found that the electronic band structures of CNRs depend on the edge structure and the ribbon width. The CNRs with zigzag edges (Z-CNRs) have spin-polarized edge states with ferromagnetic (FM) ordering along each edge and anti-ferromagnetic (AFM) ordering between two edges. The CNRs with armchair edges (A-CNRs), however, are semiconductors with the band gap oscillating with the ribbon width. For the CNTs built by rolling up δ-graphyne with different chirality, the electronic properties are closely related to the chirality of the CNTs. Armchair (n, n) CNTs are metallic while zigzag (n, 0) CNTs are semiconducting or metallic. These interesting properties are quite crucial for applications in δ-graphyne-based nanoscale devices.     

Transport properties of MoS<Subscript>2</Subscript> nanoribbons: edge priority

We report about results from density functional based calculations on structural, electronic and transport properties of one-dimensional MoS₂ nanoribbons with different widths and passivation of their edges. The edge passivation influences the electronic and transport properties of the nanoribbons. This holds especially for nanoribbons with zigzag edges. Nearly independent from the passivation the armchair MoS₂ nanoribbons are semiconductors and their band gaps exhibit an almost constant value of 0.42 eV. Our results illustrate clearly the edge priority on the electronic properties of MoS₂ nanoribbons and indicate problems for doping of MoS₂ nanoribbons.     

Conductance of bilayer graphene nanoribbons with different widths

The electronic and transport properties of bilayer graphene nanoribbons with different width are investigated theoretically by using the tight-binding model. The energy dispersion relations are found to exhibit significant dependence on the interlayer interactions and the geometry of the bilayer graphene nanoribbons. The energy gaps are oscillatory with the upper ribbon displacement. For all four types of bilayer graphene nanoribbons, the bandgaps touch the zero value and exhibit semiconductor–metal transitions. Variations in the electronic structures with the upper ribbon displacement will be reflected in the electrical and thermal conductance. The chemical-potential-dependent electrical and thermal conductances exhibit a stepwise increase and spike behavior. These conductances can be tuned by varying the upper ribbon displacement. The peak and trench structures of the conductance will be stretched out as the temperature rises. In addition, quantum conductance behavior in bilayer graphene nanoribbons can be observed experimentally at temperature below 10 K.     

First-principles predictions of the geometries and electronic structures of tungsten ditelluride nanoribbons

First-principles calculations are carried out to predict the structures and electronic properties of 2H- and Td-WTe₂ nanoribbons with different termination edges. It is found that the 2H-WTe₂ nanoribbon along the armchair direction and the Td-WTe₂ nanoribbon along the X direction show semiconducting characters with tunable band gaps. The 2H-WTe₂ nanoribbon along the zigzag direction and the Td-WTe₂ nanoribbon along the Y direction show metallic characters.     

Electronic structures of the F-terminated AlN nanoribbons

Using the first-principles calculations, electronic properties for the F-terminated AlN nanoribbons with both zigzag and armchair edges are studied. The results show that both the zigzag and armchair AlN nanoribbons are semiconducting and nonmagnetic, and the indirect band gap of the zigzag AlN nanoribbons and the direct band gap of the armchair ones decrease monotonically with increasing ribbon width. In contrast, the F-terminated AlN nanoribbons have narrower band gaps than those of the H-terminated ones when the ribbons have the same bandwidth. The density-of-states (DOS) and local density-of-states (LDOS) analyses show that the top of the valence band for the F-terminated ribbons is mainly contributed by N atoms, while at the side of the conduction band, the total DOS is mainly contributed by Al atoms. The charge density contour analyses show that Al–F bond is ionic because the electronegativity of F atom is much stronger for F atom than for Al atom, while N–F bond is covalent because of the combined action of the stronger electronegativity and the smaller covalent radius.     

Ab initio study of gold-doped zigzag graphene nanoribbons

The electronic transport properties of zigzag graphene nanoribbons (ZGNRs) through covalent functionalization of gold (Au) atoms is investigated by using non-equilibrium Green’s function combined with density functional theory. It is revealed that the electronic properties of Au-doped ZGNRs vary significantly due to spin and its non-inclusion. We find that the DOS profiles of Au-adsorbed ZGNR due to spin reveal very less number of states available for conduction, whereas non-inclusion of spin results in higher DOS across the Fermi level. Edge Au-doped ribbons exhibit stable structure and are energetically more favorable than the center Au-doped ZGNRs. Though the chemical interaction at the ZGNR–Au interface modifies the Fermi level, Au-adsorbed ZGNR reveals semimetallic properties. A prominent qualitative change of the I–V curve from linear to nonlinear is observed as the Au atom shifts from center toward the edges of the ribbon. Number of peaks present near the Fermi level ensures conductance channels available for charge transport in case of Au-center-substituted ZGNR. We predict semimetallic nature of the Au-adsorbed ZGNR with a high DOS peak distributed over a narrow energy region at the Fermi level and fewer conductance channels. Our calculations for the magnetic properties predict that Au functionalization leads to semiconducting nature with different band gaps for spin up and spin down. The outcomes are compared with the experimental and theoretical results available for other materials.     

锯齿型石墨烯纳米带的能带研究

运用π电子紧束缚模型,具体研究了锯齿型石墨烯纳米带(ZGNRs)的边界结构对能带,特别是费米面附近的导带和价带电子的影响.计算了七种不同边界结构的ZGNRs的能带色散关系及费米面附近价带电子在原胞中各原子上的分布情况.计算结果表明:两边界都无悬挂原子的NN-ZGNRs,只有一边界有悬挂原子的DN-ZGNRs,两边界都有五边形环的SPP-ZGNRs和ASPP-ZGNRs为金属性.两边界都有悬挂原子的DD-ZGNRs,一边界为五边形环另一边界无悬挂原子的PN-ZGNRs和一边界为五边形环另一边界有悬挂原子的P 关键词： 锯齿型石墨烯纳米带 紧束缚模型 电子密度分布 缺陷结构     

Electrical Investigation of Armchair Graphene-Graphdiyne-Graphene Nanoribbons Heterojunctions

In this study,the structural and electronic properties of armchair graphdiyne nanoribbons,which have different widths are studied using the first principle calculation.The results indicate that all studied AGDYNRs show semiconducting behavior in which the band gap values decrease with the increase of nanoribbons width.The electronic and electrical properties of the graphdiyne sandwiched between two graphene nanoribbons are also investigated.The findings of our study indicate that among 4 investigated n-G-GDY-G-NR structures,the highest current is calculated for n = 3(3-G-GDY-G-NR),due to phase transition.     

Mechanical and electronic properties of stoichiometric silicene and germanene oxides from first‐principles

Using first‐principles calculations, we investigate the fully oxidized silicene and germanene with stoichiometric ratio Si:O/Ge:O = 1:1. For both compounds, the zigzag ether‐like conformation (z‐sSiO/z‐sGeO) is found to be the most energetically favorable structure. These z‐sSiO and z‐sGeO nanosheets have prominent elastic characteristics, which even exhibit an unconventional auxetic behavior with negative Poisson ratios. After oxidation, the semi‐metallic nanosheets are transformed into semiconductors with narrow direct band gaps. Due to the anisotropic mechanical and electronic properties, the z‐sSiO and z‐sGeO possess an axially high intrinsic charge mobility up to the order of 10⁴ cm²/Vs, which is comparable to that of graphene nanoribbons. Our studies demonstrate that the silicene and germanene oxides have peculiar mechanical and electronic properties, which endow these nanostructures for potential applications in nanoelectronics and devices. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Modulation of electronic properties with external fields in silicene-based nanostructures

This work reviews our recent works about the density functional theory(DFT) calculational aspects of electronic properties in silicene-based nanostructures with the modulation of external fields, such as electric field, strain, etc. For the two-dimensional(2D) silicene-based nonostructures, the magnetic moment of Fe-doped silicene shows a sharp jump at a threshold electric field, which indicates a good switching effect, implying potential applications as a magnetoelectric(ME) diode. With the electric field, the good controllability and sharp switching of the magnetism may offer a potential applications in the ME devices. For the one-dimensional(1D) nanostructures, the silicene nanoribbons with sawtooth edges(SSi NRs) are more stable than the zigzag silicene nanoribbons(ZSiNRs) and show spin-semiconducting features. Under external electric field or uniaxial compressive strain, the gapless spin-semiconductors are gained, which is significant in designing qubits for quantum computing in spintronics. The superlattice structures of silicene-based armchair nanoribbons(ASiSLs) is another example for 1D silicene nanostructures. The band structures of ASi SLs can be modulated by the size and strain of the superlattices. With the stain increased, the related energy gaps of ASi SLs will change, which are significantly different with that of the constituent nanoribbons. The results suggest potential applications in designing quantum wells.     

Monolayered semiconducting GeAsSe and SnSbTe with ultrahigh hole mobility

High carrier mobility and a direct semiconducting band gap are two key properties of materials for electronic device applications. Using first-principles calculations, we predict two types of two-dimensional semiconductors, ultrathin GeAsSe and SnSbTe nanosheets, with desirable electronic and optical properties. Both GeAsSe and SnSbTe sheets are energetically favorable, with formation energies of −0.19 and −0.09 eV/atom, respectively, and have excellent dynamical and thermal stability, as determined by phonon dispersion calculations and Born–Oppenheimer molecular dynamics simulations. The relatively weak interlayer binding energies suggest that these monolayer sheets can be easily exfoliated from the bulk crystals. Importantly, monolayer GeAsSe and SnSbTe possess direct band gaps (2.56 and 1.96 eV, respectively) and superior hole mobility (~20 000 cm²·V⁻¹·s⁻¹), and both exhibit notable absorption in the visible region. A comparison of the band edge positions with the redox potentials of water reveals that layered GeAsSe and SnSbTe are potential photocatalysts for water splitting. These exceptional properties make layered GeAsSe and SnSbTe promising candidates for use in future high-speed electronic and optoelectronic devices.     

单空位缺陷对石墨纳米带电子结构和输运性质的影响

基于第一性原理电子结构和输运性质计算,研究了单空位缺陷对单层石墨纳米带(包括zigzag型和armchair型带)电子性质的影响.研究发现,单空位缺陷使石墨纳米带在费米面上出现一平直的缺陷态能带;单空位缺陷的引入使zigzag型半导体性的石墨纳米带变为金属性,这在能带工程中有重要的应用价值;奇数宽度的armchair型石墨纳米带表现出金属特性,有着很好的导电性能,同时,偶数宽度的armchair型石墨带虽有金属性的能带结构,但却有类似半导体的伏安特性;单空位缺陷使得奇数宽度的armchair石墨纳米带导电 关键词： 石墨纳米带 单空位缺陷 电子结构 输运性质     

Modulation of electronic structure properties of C/B/Al-doped armchair GaN nanoribbons

ABSTRACT

The electronic structures of C/B/Al-doped armchair GaN nanoribbons (aGaNNRs) are systematically studied by using density functional theory. We find that the original aGaNNRs are direct band gap semiconductors and that the gaps monotonically decrease with increasing widths. Interestingly, the B- or Al-doped aGaNNRs are also direct-band gap semiconductors with a slightly larger gap than their undoped aGaNNRs, while the C-doped aGaNNRs display metallic characteristics with an impurity state across the Fermi level in band structures. The semiconducting or metallic behaviours of C/B/Al-doped aGaNNRs can be explained by the orbital coupling between the extrinsic atom and primary Ga, N in their partial density of states. Our results show a useful way to modulate the band gaps of aGaNNRs.

Using the density-functional theory, we performed a theoretical research to study the electronic structures of C/B/Al-doped armchair gallium nitride nanoribbons. The calculated band structures show that the perfect and original aGaNNRs are direct semiconductors regardless of ribbon widths, and gaps monotonically decrease with increasing the widths. The B/Al-doped aGaNNRs are semiconductors with a slightly larger gap, while metallic behavior presents in C-doped aGaNNRs with an impurity band across the EF. The results show a useful way to modulate the band gaps of aGaNNRs.     

Scalable preparation of water-soluble ink of few-layered WSe_2 nanosheets for large-area electronics

Few-layer two-dimensional(2 D) semiconductor nanosheets with a layer-dependent band gap are attractive building blocks for large-area thin-film electronics. A general approach is developed to fast prepare uniform and phase-pure 2 HWSe2 semiconducting nanosheets at a large scale, which involves the supercritical carbon dioxide(SC-CO2) treatment and a mild sonication-assisted exfoliation process in aqueous solution. The as-prepared 2 H-WSe2 nanosheets preserve the intrinsic physical properties and intact crystal structures, as confirmed by Raman, x-ray photoelectron spectroscopy(XPS),and scanning transmission electron microscope(STEM). The uniform 2 H-WSe2 nanosheets can disperse well in water for over six months. Such good dispersivity and uniformity enable these nanosheets to self-assembly into thickness-controlled thin films for scalable fabrication of large-area arrays of thin-film electronics. The electronic transport and photoelectronic properties of the field-effect transistor based on the self-assembly 2 H-WSe2 thin film have also been explored.     

Electronic structures for armchair-edge graphene nanoribbons under a small uniaxial strain

We theoretically investigate the electronic structures for armchair-edge graphene nanoribbons (AGNRs) under a small in-plane uniaxial strain along armchair (longitudinal) and zigzag (transversal) direction, respectively. We demonstrate that, by both the tight-binding calculation and first-principles study, the applying of a small asymmetrical strain results in variation of energy subband spacing, which opens a band gap for metallic AGNRs and modifies the band gaps for semiconducting AGNRs near the Fermi level. It is believed that these results are of importance in the band gap engineering and electromechanical applications of graphene-nanoribbon-based devices.     

应变对两层半氢化氮化镓薄膜电磁学性质的调控机理研究

采用基于密度泛函理论的第一性原理模拟计算,研究了在应变作用下两层半氢化氮化镓纳米薄膜的电学和磁学性质.没有表面修饰的两层氮化镓纳米薄膜的原子结构为类石墨结构,并具有间接能隙.然而,当两层氮化镓纳米薄膜的一侧表面镓原子被氢化时,该纳米薄膜却依然保持纤锌矿结构,并且展示出铁磁性半导体特性.在应变作用下,两层半氢化氮化镓纳米薄膜的能隙可进行有效调控,并且它将会由半导体性质可转变为半金属性质或金属性质.这主要是由于应变对表面氮原子的键间交互影响和p-p轨道直接交互影响之间协调作用的结果.该研究成果为实现低维半导体纳米材料的多样化提供了有效的调控手段,为其应用于新型电子纳米器件和自旋电子器件提供重要的理论指导.     

三角形石墨烯量子点阵列的磁电子学特性和磁输运性质

基于密度泛函理论的第一性原理计算方法,研究了三角形石墨烯纳米片用不同连接方式拼接而成的四种一维量子点阵列(1D QDAs)的磁电子学性质和磁输运性质.结合能计算表明所有1D QDAs是非常稳定的.特别是研究发现1D QDAs的电子和磁性质不仅依赖于磁性态,也明显依赖于连接方式,如在无磁态时,不同量子点阵列(QDAs)可为金属或窄带隙半导体.在铁磁态时,不同QDAs能为半金属(half-metal)或带隙不同的双极化磁性半导体.而在反铁磁态时,不同QDAs为带隙不等的半导体.这些结果意味着连接方式对有效调控纳米结构电子和磁性质扮演重要的角色.1D QDAs呈现的半金属或双极化磁性半导体性质对于发展磁器件是非常重要的,而这些性质未曾在本征石墨烯纳米带中出现.同时,我们也研究了一种阵列的磁器件特性,发现其拥有完美的(100%)单或双自旋过滤效应,尤其是呈现超过109%的巨磁阻效应.