压电陶瓷非线性对大功率换能器结构参数匹配影响的计算分析

在Guyomar非线性模型基础上,通过机电等效法将晶堆前向负载作为等效质量和阻尼加入振动方程的质量项和阻尼项,推导了换能器振速、辐射声压级和谐振频率偏移率等表达式,计算分析了压电陶瓷非线性参数和结构参数对换能器声辐射性能的影响,研究了压电陶瓷的非线性对换能器结构参数匹配的影响。结果表明,换能器节面靠前,前盖板厚度越小,前盖板大径越小,都可以减少压电陶瓷非线性引起的换能器频率偏移。当设计频率确定时,压电陶瓷处于非线性工作域的换能器的结构参数有所减小。换能器加入辐射端匹配后,可以改善压电晶堆前向负载匹配,降低换能器的谐振频率偏移率。换能器激励电流也会出现频率偏移现象。在提高换能器激励电压时,换能器的结构参数应适当减小。得到的结论可为换能器设计提供理论依据和帮助。     

复频聚焦超声换能器水中焦区商场特性的研究

本文对新研制的一种复频聚焦超声换能器的辐射声场进行了实验研究,测定了辐射压在轴向上的分布曲线,进而确定了焦区位置,这与理论所得结果符合较好,测定了辐射声压在焦平面上的分布曲线,并对焦区声场进行了定位,最后对换能器在水中焦区辐射声的频谱进行了研究,不仅观测到了两个源波,而且还观测到了和频波,差频波以及倍频波,证实了声散射声效应的存在。     

采用Helmholtz共鸣器与悬臂梁压电换能器的声能采集器研究

针对环境中广泛存在的声能,提出了一种采用Helmholtz共鸣器和悬臂梁压电换能器的声能采集器。Helmholtz共鸣器对入射声压进行放大,放大后的声压引起共鸣器弹性薄壁振动,薄壁的振动传递到压电换能器产生电能输出。建立了带弹性壁的立方形共鸣器的等效集中参数理论模型,并与压电换能器的机电特性结合,分析了声能采集器的声-机-电转换原理,研究了声压、声波频率和负载阻抗对输出功率的影响,研究结果为此类声能采集器的优化设计及工程应用提供了一种可行的方法。实验中,声源通过声波导管输出声能,当共鸣器管口处的声压级为94 dB时,系统实测最大输出功率达240μW。该采集器不仅可作为声能自供能采集器,还可在较远距离为低能耗电子装置进行有源声供能。      

概率盒框架下混合认知不确定声场的响应预测

针对含概率盒-证据混合认知不确定参数声场的响应预测问题,提出了一种概率盒框架下的改进区间蒙特卡洛方法。该方法首先将混合认知不确定参数转换为纯概率盒形式,然后结合有限元方法推导出混合认知不确定声场的盖根鲍尔多项式代理模型,再采用蒙特卡洛方法求解代理模型得到声压响应。以含概率盒-证据混合认知不确定参数的二维管道声场模型和卡车乘客舱声腔模型为例,计算结果表明混合认知不确定参数影响下的声压响应为概率盒形式,其包括声压响应极值和相应的概率信息,并且所提方法较常规混合离散方法效率更优,较基于一阶摄动法的区间蒙特卡洛方法准确性更高。研究结果表明:所提方法可以有效预测混合认知不确定声场的声压响应,并可进行声学性能的风险和保守估计。      

夹层式光纤激光水听器探头优化设计

为改善分布反馈式(DFB)光纤激光器水声探测性能,利用有限元软件ANSYS,以相对加速度灵敏度为目标函数,结构尺寸参数为设计变量,结构第一阶固有频率和探头声压灵敏度为状态变量,对夹层式封装结构进行了优化设计,对其声压探测及抗加速度机理进行了分析。分析表明,基于优化结果设计的探头在采用100m非平衡干涉仪时,其声压灵敏度约为-135.1dB,相对加速度灵敏度可达到-19.6dB。结果表明,基于封装结构敏感部分分别承受声压激励和加速度激励时的不同响应机理,对夹层式封装结构关键部位尺寸进行优化设计后,通过合理选择承压梁与中间变形梁的厚度以及上下连接点的位置,封装制得的光纤激光水听器具有较高的声压灵敏度和良好的抗加速度性能。     

A wideband combined transducer for measuring system in sound tube

A wideband transducer for sound tube system is presented,which combines longitudinal transducer and ClassⅣflextensional transducer to improve the performance at low frequency and broaden the working band.The equivalent circuit is obtained and used to analyze the coupling mechanism between longitudinal transducer and flextensional transducer.A prototype of the transducer is developed after optimizing the electro-acoustic performances by Finite Element Method.The standing wave in the sound tube stimulated by this transducer has been studied and the sound absorbing coefficients of two acoustic materials samples are measured using this sound tube,which shows that the transducer can meet the requirements of acoustic material measurement with the working band ranging from 1.4 kHz to 23 kHz.     

分层吸声结构的声学设计与性能分析

本文给出了声波在多层介质中的传播方程，通过数值计算，分析了各层参数对分层吸声结构声学性能的影响规律。用参数匹配方法，对多层吸声结构各层材料的参数进行设计。结果表明，通过合理分布各层材料，多层吸声结构可以在较宽频段上达到满意的吸声性能。     

叠合结构超低频弯张换能器

研究了一种将多个椭圆弯张壳体在短轴方向进行机械叠合的超低频弯张换能器,每个弯张壳体采用超磁致伸缩材料进行驱动。推导了多个叠合壳体的等效电路,利用支路阻抗方法得到了换能器频率和阻抗的方程表达式。针对多个壳体叠合的结构复杂性,采用有限元方法计算并分析了叠合壳体换能器的多个结构点的振动位移分布,通过平动位移分布设计了活塞辐射面的结构参数。将有限元方法计算的换能器在空气中和水中的谐振频率与等效电路法计算的结果进行了对比,符合较好。研制了6个壳体叠合的超低频弯张换能器样机,换能器外形尺寸为Φ230×630 mm,重量为39 kg。换能器经湖上试验,水中谐振频率130 Hz,最大发送电流响应161.1 dB,最大发射声源级为180.4 dB,实现了超低频、小尺寸的发射能力。      

A modal test method using sound pressure transducers based on vibro-acoustic reciprocity

A modal test method that uses sound pressure transducers at fixed locations and an impact hammer roving over a test structure is developed in this work. Since sound pressure transducers are used, the current method deals with a coupled structural–acoustic system. Based on the vibro-acoustic reciprocity, the method is equivalent to one, where acoustic excitations at fixed locations are given and the resulting acceleration of the test structure is measured. The current method can eliminate mass loading due to use of accelerometers, which can destroy existence of repeated or close natural frequencies of a symmetric structure. It can also avoid effects of a nodal line of a mode and an inactive area of a local mode, and measure all the out-of-plane modes within a frequency range of interest, including global and local ones. The coupling between the structure and the acoustic field in a structural–acoustic system introduces asymmetry in the model formulation. An equivalent state space formulation is used for a damped structural–acoustic system and the associated eigenvalue problem is derived. The biorthonormality relations between the left and right eigenvectors and the relations between the structural and acoustic components in the left and right eigenvectors are proved. The frequency response functions associated with the current method are derived and their physical meanings are explained. The guidelines for using the current method, including the types of structures that are suitable for the method, the positions of the sound pressure transducers, and the orientation of the test structure relative to the transducers, are provided. Modal tests were carried out on an automotive disk brake using the traditional and current methods, where multiple accelerometers and microphones were used to measure its dynamic responses induced by impacts, respectively. The differences between the measured natural frequencies using the current method and those from the finite element model of the disk brake are less than 3 percent for the first 18 elastic modes, and the modal assurance criterion values of the associated mode shapes are all above 90 percent. The current method was also used to measure the natural frequencies, damping ratios, and mode shapes of a light circuit board.     

弯曲圆盘驱动的双Helmholtz共振腔换能器

使用双面同相振动的弯曲圆盘换能器驱动双Helmholtz共振腔,既放大了弯曲圆盘换能器弯曲共振频率以下频段的声输出,又利用两个Helmholtz共振腔的同相声源辐射模型实现了在Helmholtz共振频率处的"∞"字形垂直指向性,实现了低频指向性声发射。阐述了换能器实现"∞"字形低频指向性发射的机理,研究了腔体长度、金属圆片厚度及弯曲圆盘边缘简支厚度等关键结构参数对Helmholtz共振频率的影响,求解了换能器的发送电压响应、指向性等参数。依据仿真结果制作了实验样机,在消声水池中进行了电声性能测试。测试结果显示,指向性形状及液腔共振频率与仿真结果基本相符。这种由弯曲圆盘驱动的双Helmholtz共振腔水声换能器为实现水声换能器小尺寸、低频指向性发射提供了一种技术手段。      

双壳嵌套鱼唇式弯张换能器

研究了一种双壳嵌套鱼唇式弯张换能器,针对特殊结构的空气背衬弯张换能器提出了表征换能器静压形变的系列参数,利用有限元方法研究了这些参数与结构参数的对应关系,并进行了换能器的静态分析。在静态分析基础上,研究了结构参数对换能器声辐射特性的影响,经对比分析得到换能器的优化方案,研制了实验样机,经外场试验验证了双壳嵌套鱼唇式弯张换能器具有小尺寸、频率低、高效率、大功率的工作特性:谐振频率800 Hz、最大声源级199.5 dB、电声效率23.6%、工作深度200 m。      

Effects of mutual impedance on the radiation characteristics of transducer arrays

The mutual resistance of transducer arrays is investigated in order to design arrays with improved performance for high intensity sounds at a given frequency. This work proposes the theory that the mutual resistance is related to the loading effects of pressure waves propagated from a piston driver on the surface of another driver. Using this interpretation, the important characteristics of the mutual resistance of two piston drivers are explained and the conditions for local maxima in the mutual resistance are easily determined. On the basis of analyses of the interactions between a driver and acoustic pressure waves, we propose a method to determine the driver radius and the distance between two drivers that give maximum mutual radiation resistance. To evaluate the proposed method, the total resistance of a transducer array is calculated using the formulas for mutual and self-resistance established by Pritchard. The results of the calculations of the total resistances of arrays with many drivers show that a transducer array with drivers arranged sparsely can achieve a larger value of the radiation power per unit area as well as better radiation efficiency than an array in which the drivers are in a closely packed arrangement at a given frequency.     

磁致伸缩换能器辐射板形状对声场分布的影响

磁致伸缩换能器可作为热声制冷机的声源装置,辐射板的形状直接影响声压输出效率,从而影响制冷效果。为提高换能器工作效率、减小换能器体积,辐射板需在Terfenol-D棒的激励下产生大振幅、高频率的活塞振型。针对这一问题,应用ATILA软件分析了磁致伸缩换能器辐射板形状对谐振腔振动幅频特性的影响以及对谐振腔内声场分布的影响。结果表明:相同激励条件下,凹球面辐射板出现活塞振型时振幅最大,对应谐振腔中声压幅值最高;谐振腔端面形状为凹球面时,具有聚焦声压幅值的作用;端面形状为凹发射端-凸反射端组合的谐振腔内声压幅值最高。以上结论为合理设计辐射板、谐振腔两端面组合形状提供了参考。     

鼓泡床中超声驻波的模拟及其对气泡的调制机理

采用计算流体动力学（CFD）的方法，数值生成了鼓泡床中一对声换能器以16kHz高频振动引发的超声场。数值计算是基于包括粘性影响的可压缩流体基本守恒方程，并耦合了水的状态方程。模拟结果表明，在本研究所用的几何布置和换能器与时间相关的速度入口边界条件下，反应器中形成了一个稳定的驻波声场；由于波的非线性以及水的粘性，压力波节点呈现出轻微的时间漂移性。模拟结果与前人的实验结果定性吻合。在模拟的声压分布的基础上，分析了驻波声场调制气泡的机理。如比较熟知，气泡在驻波声场作用下或者向压力波节点运动或者向压力波腹点运动，取决于气泡尺寸与共振尺寸的关系。     

Structural topology optimization on sound radiation at resonance frequencies in thermal environments

Thermal and acoustic environments pose severe challenges to the structural design of hypersonic vehicles.One of them is to find optimal design that exhibits ideal acoustic characteristics in a frequency band,which is discussed in this paper through topology optimization aiming at resonance sound radiation in thermal environments.The sound radiation at resonance frequencies is the main component of response,minimization on which is likely to provide a satisfactory design.A bi-material plate subjected to uniform temperature rise and excited by harmonic loading is studied here.Thermal stress is first evaluated and considered as prestress in the following dynamic analysis;radiated sound power is then calculated through Rayleigh integral.Sensitivity analysis is carried out through adjoint method considering the complicated relationship between stress-induced geometric stiffness and design variables.As the resonance frequency is constantly changing during the optimization,its sensitivity should be considered.It is also noticed that mode switching may occur,so mode tracking technique is employed in this work.Some numerical examples are finally discussed.     

An alternative method to measure the on-axis difference-frequency sound in a parametric loudspeaker without using an acoustic filter

The self-demodulation characteristic of finite-amplitude ultrasonic sound waves can be applied with parametric loudspeaker to reproduce audible sound with highly directivity. But measuring the difference-frequency sound is still a problem due to the spurious sound generated as a result of nonlinearity caused by the product of the primary waves at the receiving system. In this paper, based on the phase-cancellation method and the Gaussian beam expansion technique, an alternative method is proposed to measure the on-axis difference-frequency sound accurately without using any traditional acoustic filter, where the spurious sound can be greatly reduced or even eliminated. The proposed method is more suitable for the case where the piston source in the parametric loudspeaker comprises multiple small piezoelectric transducers (PZTs) and each transducer element in the array may have different frequency response. The validity of the proposed method is confirmed both by simulations and experiments.     

基于四水听器的充水弹性管声速测量方法*

实验室中水声材料声学参数的测量主要在水声声管中进行。管内平面波声速是正确测量这些参数的基础。该文提出一种基于四水听器结合不同边界的测量充水弹性管中声速的新方法。该方法利用4个固定位置处的水听器,采用最小二乘的方法,使得两组水听器分别得到的声管末端入射波声压差值的平方最小的声速即为管内平面波声速。该方法利用单频信号,在每一频率点均可测得声速,可以在任一种声管末端边界下进行测量,同时无需知道各水听器到边界的精确距离,在文中的3种边界下声速测量结果具有很好的一致性,实验操作简单、误差很小。该方法的仿真结果与管内声速的理论值吻合得很好,同时实验测量结果与仿真值之间的误差很小,证明了方法的准确性以及鲁棒性,为声管声速测量提供一个很好的思路。     

Dynamic response of an insonified sonar window interacting with a Tonpilz transducer array

This paper derives and evaluates an analytical model of an insonified sonar window in contact with an array of Tonpilz transducers operating in receive mode. The window is fully elastic so that all wave components are present in the analysis. The output of the model is a transfer function of a transducer element output voltage divided by input pressure versus arrival angle and frequency. This model is intended for analysis of sonar systems that are to be built or modified for broadband processing. The model is validated at low frequency with a comparison to a previously derived thin plate model. Once this is done, an example problem is studied so that the effects of higher order wave interaction with acoustic reception can be understood. It was found that these higher order waves cause multiple nulls in the region where the array detects acoustic energy and that their locations in the arrival angle-frequency plane can be determined. The effects of these nulls in the beam patterns of the array are demonstrated.     

脉冲超声换能器声场测试系统的设计*

脉冲超声换能器是超声检测的关键部件,为了获取其声场特性参数,文中基于小球反射法原理,采用虚拟仪器技术和单片机技术设计了声场测试系统。系统的程控交互界面采用了美国国家仪器公司研制开发的图形化编程软件LabVIEW来设计,在程控交互界面程序中通过调用动态链接库DLL来对系统核心硬件超声发射接收卡进行数据通信及对卡功能进行设置,同时系统上位机通过RS232串口与下位机单片机通讯,实现对三轴扫查平台的多种扫查方式控制。该系统可实时显示脉冲换能器声压分布图像,并可通过对声压分布数据实现对换能器近场长度及扩散角等参数的测量。