Enantioselective tandem O-nitroso Aldol/Michael reaction

This communication presents studies that illustrated nitroso Diels-Alder adduct has been obtained in uniformly high enantioselectivity via a tandem nitroso aldol/Michael reaction using an amine catalyst. The regiochemical outcome of this construction is documented to be the opposite to that of the normal nitroso aldol reaction, which has been determined by X-ray analysis. The reaction of the enone with silver-BINAP catalyst has also been investigated in conjunction with the control of regiochemistry in a stepwise process.     

Catalytic enantioselective synthesis of alpha-aminooxy and alpha-hydroxy ketone using nitrosobenzene

The highly enantioselective and O-selective nitroso aldol reaction of tin enolates 2 and nitrosobenzene (1) has been developed with the use of (R)-BINAP-silver complexes as a catalyst. After the various silver salts were surveyed, the AgOTf and the AgClO4 complex were found to be optimal in the O-selective nitroso aldol reaction in both asymmetric induction (up to 97% ee) and regioselection (O/N = >99/1), affording aminooxy ketone 3. The product 3 can be transformed to alpha-hydroxy ketone 5 without any loss of enantioselectivity. Thus, the method provides an efficient approach to the catalytic enantioselective introduction of oxygen alpha- to the carbonyl group.     

Direct catalytic asymmetric aldol reaction of hydroxyketones: asymmetric Zn catalysis with a Et(2)Zn/linked-BINOL complex

Full details of our newly developed catalyses with asymmetric zinc complexes as mimics of class II zinc-containing aldolase are described. A Et(2)Zn/(S,S)-linked-BINOL complex was developed and successfully applied to direct catalytic asymmetric aldol reactions of hydroxyketones. A Et(2)Zn/(S,S)-linked-BINOL 1 = 2/1 system was initially developed, which efficiently promoted the direct aldol reaction of 2-hydroxy-2'-methoxyacetophenone (7d). Using 1 mol % of (S,S)-linked-BINOL 1 and 2 mol % of Et(2)Zn, we obtained 1,2-dihydroxyketones syn-selectively in high yield (up to 95%), good diastereomeric ratio (up to 97/3), and excellent enantiomeric excess (up to 99%). Mechanistic investigation of Et(2)Zn/(S,S)-linked-BINOL 1, including X-ray analysis, NMR analysis, cold spray ionization mass spectrometry (CSI-MS) analysis, and kinetic studies, provided new insight into the active oligomeric Zn/(S,S)-linked-BINOL 1/ketone 7d active species. On the basis of mechanistic investigations, a modified second generation Et(2)Zn/(S,S)-linked-BINOL 1 = 4/1 with molecular sieves 3A (MS 3A) system was developed as a much more effective catalyst system for the direct aldol reaction. As little as 0.1 mol % of (S,S)-linked-BINOL 1 and 0.4 mol % of Et(2)Zn promoted the direct aldol reaction smoothly, using only 1.1 equiv of 7d as a donor (substrate/ligand = 1000). This is the most efficient, in terms of catalyst loading, asymmetric catalyst for the direct catalytic asymmetric aldol reaction. Moreover, the Et(2)Zn/(S,S)-linked-BINOL 1 = 4/1 system was effective in the direct catalytic asymmetric aldol reaction of 2-hydroxy-2'-methoxypropiophenone (12), which afforded a chiral tetrasubstituted carbon center (tert-alcohol) in good yield (up to 97%) and ee (up to 97%), albeit in modest syn-selectivity. Newly developed (S,S)-sulfur-linked-BINOL 2 was also effective in the direct aldol reaction of 12. The Et(2)Zn/(S,S)-sulfur-linked-BINOL 2 = 4/1 system gave aldol adducts anti-selectively in good ee (up to 93%). Transformations of the aldol adducts into synthetically versatile intermediates were also described.     

Direct catalytic enantio- and diastereoselective aldol reaction of thioamides

A direct catalytic asymmetric aldol reaction of thioamides using a soft Lewis acid/hard Br?nsted base cooperative catalyst comprising (R,R)-Ph-BPE/[Cu(CH(3)CN)(4)]PF(6)/LiOAr is described. Exclusive enolate generation from thioacetamides through a soft-soft interaction with the soft Lewis acid allowed for a direct aldol reaction to α-nonbranched aliphatic aldehydes, which are usually susceptible to self-condensation under conventional basic conditions. A hard Lewis basic phosphine oxide has emerged as an effective additive to constitute a highly active ternary soft Lewis acid/hard Br?nsted base/hard Lewis base cooperative catalyst, enabling a direct enantio- and diastereoselective aldol reaction of thiopropionamides. Strict control of the amount of the hard Lewis base was essential to drive the catalytic cycle efficiently with a minimized retro-aldol pathway, affording syn-aldol products with high stereoselectivity. Divergent transformation of the thioamide functionality is an obvious merit of the present aldol methodology, allowing for a facile transformation of the aldol product into the corresponding aldehyde, ketone, amide, amine, and ketoester. An aldehyde derived from the direct aldol reaction was subjected to a second direct aldol reaction, which proceeded in a catalyst-controlled manner to provide 1,3-diols with high stereoselectivity.     

The first direct and enantioselective cross-aldol reaction of aldehydes

The first enantioselective catalytic direct cross-aldol reaction that employs nonequivalent aldehydes has been accomplished using proline as the reaction catalyst. Structural variation in both the aldol donor (R1 = Me, n-Bu, Bn, 91 to >99%) and aldol acceptor (R2 = I-Pr, I-Bu, c-C6H11, Et, Ph, 97-99% ee) are possible while maintaining high reaction efficiency (75-88% yield). Significantly, this new aldol variant allows facile enantioselective access to a broad range of beta-hydroxy aldehydes which are valuable intermediates in polyketide syntheses.     

Bronsted acid catalysis of achiral enamine for regio- and enantioselective nitroso aldol synthesis

Two types of chiral Br?nsted acid catalysts have been shown to catalyze regio- and enantioselective nitroso aldol synthesis between nitrosobenzene and achiral enamine. The combination of Br?nsted acidity and amine moiety of enamine realizes complete regioselectivity with high enantioselectivity. After a survey of Br?nsted acid catalysts, 1-naphthyl glycolic acid is found to be optimal in the O-nitroso aldol pathway, while 1-naphthyl TADDOL is the best catalyst for the N-nitroso aldol pathway. This is based on our finding on the control of regioselectivity by changing the amine moiety of enamine and the choice of Br?nsted acidity.     

Morphology-Controlled Synthesis and Applications of Silver Halide Photocatalytic Materials

Semiconductor photocatalysis is considered to be one of the most promising technologies to solve the worldwide environmental and energy issues. In recent years, silver halide (AgX)-based photocatalytic materials have received increasing research attention owing to its excellent visible light-driven photocatalytic performances in the applications of organic pollutant degradation, H₂/O₂ generation, and disinfection. AgX-based materials used in photocatalytic fields can be classified into three categories: AgX (Ag/AgX), AgX composites, and supported AgX materials. For the AgX (Ag/AgX) photocatalysts, it has been widely accepted that the final photocatalytic performances of photocatalysts are severely dependent on their morphological structures as well as exposed crystal facets. As a result, considerable efforts have been devoted to fabricating different morphological AgX photocatalysts as well as exploring the relationship between the morphological structures and photocatalytic performances. In this review, we mainly introduce the recent developments made in fabricating morphology and facet-controllable AgX (Ag/AgX) photocatalytic materials. Moreover, this review also deals with the photocatalytic mechanism and applications of AgX (Ag/AgX) and supported AgX materials.     

Mechanism of silver(I)-catalyzed Mukaiyama aldol reaction: active species in solution in AgPF6-(S)-BINAP versus AgOAc-(S)-BINAP systems

Silver(I)-diphosphine complex is an effective catalyst for Mukaiyama Aldol reaction in polar solvents. AgPF₆-(S)-BINAP cationic chiral complex indicated a good activity and could afford fairly high enantioselectivity in the reaction of aromatic aldehydes and silyl enol ethers. On the other hand, AgOAc-(S)-BINAP system afforded the aldol product of the absolute configuration opposite to that by AgPF₆-(S)-BINAP and very high catalytic activity was shown. The structure and equilibrium state of Ag(I)-BINAP complexes in solution were examined to understand the reaction mechanism. In AgPF₆ system [Ag((S)-BINAP)₂]PF₆ (1a), [Ag((S)-BINAP)]PF₆ (1b), [Ag₂((S)-BINAP)](PF₆)₂ (1c) and AgPF₆ are present in solution. The active species of the aldol reaction in DMF is [Ag((S)-BINAP)]PF₆ (1b), which exists as a minor species in solution. For this cationic Ag(I) catalyst, cyclic transition state containing substrate and silyl enol ether is assumed. In AgOAc-(S)-BINAP system, active species is also monomeric AgOAc((S)-BINAP) (2b) species which exists as a major component in solution and strong interaction was observed with a silyl enol ether. The reaction by AgOAc-(S)-BINAP catalyst is concluded to proceed as follows: nucleophile forms a complex with AgOAc-(S)-BINAP species and is activated. This complex attacks aldehydes to afford aldol adduct via acyclic transition state.     

Highly enantioselective synthesis of 2,6-disubstituted and 2,2,6-trisubstituted dihydropyrones: a one-step synthesis of (R)-(+)-hepialone and its analogues

An efficient enantioselective approach to chiral dihydropyrones has been developed by the hetero-Diels-Alder (HDA) reactions of (E)-4-methoxy-2-trimethylsiloxy-penta-1,3-diene (diene 1) with aldehydes and pyruvates. It has been found that the readily accessible (R)-BINOL-Ti(OiPr)(4) (1.1:1) complex was a very effective catalyst for this reaction. Aromatic, heteroaromatic, conjugated, and aliphatic aldehydes afforded the corresponding products in moderate to high isolated yields (up to 99%) with excellent enantioselectivities (up to 99% ee). The first example of highly enantioselective synthesis of 2,2,6-trisubstituted dihydropyrones by the catalytic reaction of diene 1 with pyruvates was reported. The isolated intermediates indicated that this asymmetric HDA reaction proceeded in a Mukaiyama aldol pathway. On the basis of the absolute configurations of the products, a possible mechanism was proposed. Moreover, the catalytic system could be used to synthesize a series of enantioenriched beta-hydroxyketones 4. Finally, this methodology was successfully applied for the one-step synthesis of the important natural product (R)-(+)-Hepialone with 88% isolated yield and 94% enantioselectivity.     

Lewis base catalyzed, enantioselective aldol addition of methyl trichlorosilyl ketene acetal to ketones

The catalytic enantioselective addition of an acetate enolate equivalent to ketones is described. Methyl trichlorosilyl ketene acetal reacts with a wide range of ketones in the presence of pyridine N-oxide to afford the aldol addition products in excellent yields. Chiral 2,2'-pyridyl bis-N-oxides bearing various substituents at the 3,3'- and 6,6'-positions also provide excellent yields of the aldol products with variable enantioselectivities ranging from 94/6 er for aromatic ketones to nearly racemic for aliphatic ketones. An X-ray crystal structure of the complex between a catalyst and silicon tetrachloride (((P)-(R,R)-19.SiCl(4))) has been obtained. Extensive computational analysis provides a stereochemical rationale for the observed trends in enantioselectivities.     

高分子负载的羟基脯氨酸催化丙酮与邻-和对-硝基苯甲醛的不对称直接Aldol加成反应

以4(R)-羟基脯氨酸为原料，合成了高分子负载的脯氨酸衍生物，并用来催化丙酮对邻-和对-硝基苯甲醛的直接不对称Aldol加成反应，ee值最高可达80％，催化剂至少可以重复利用三次．     

Aldol additions of dihydroxyacetone phosphate to N-Cbz-amino aldehydes catalyzed by L-fuculose-1-phosphate aldolase in emulsion systems: inversion of stereoselectivity as a function of the acceptor aldehyde

The potential of L-fuculose-1-phosphate aldolase (FucA) as a catalyst for the asymmetric aldol addition of dihydroxyacetone phosphate (DHAP) to N-protected amino aldehydes has been investigated. First, the reaction was studied in both emulsion systems and conventional dimethylformamide (DMF)/H2O (1:4 v/v) mixtures. At 100 mM DHAP, compared with the reactions in the DMF/H2O (1:4) mixture, the use of emulsion systems led to two- to three-fold improvements in the conversions of the FucA-catalyzed reactions. The N-protected aminopolyols thus obtained were converted to iminocyclitols by reductive amination with Pd/C. This reaction was highly diastereoselective with the exception of the reaction of the aldol adduct formed from (S)-N-Cbz-alaninal, which gave a 55:45 mixture of both epimers. From the stereochemical analysis of the resulting iminocyclitols, it was concluded that the stereoselectivity of the FucA-catalyzed reaction depended upon the structure of the N-Cbz-amino aldehyde acceptor. Whereas the enzymatic aldol reaction with both enantiomers of N-Cbz-alaninal exclusively gave the expected 3R,4R configuration, the stereochemistry at the C-4 position of the major aldol adducts produced in the reactions with N-Cbz-glycinal and N-Cbz-3-aminopropanal was inverted to the 3R,4S configuration. The study of the FucA-catalyzed addition of DHAP to phenylacetaldehyde and benzyloxyacetaldehyde revealed that the 4R product was kinetically favored, but rapidly disappeared in favor of the 4S diastereoisomer. Computational models were generated for the situations before and after C-C bond formation in the active site of FucA. Moreover, the lowest-energy conformations of each pair of the resulting epimeric adducts were determined. The data show that the products with a 3R,4S configuration were thermodynamically more stable and, therefore, the major products formed, in agreement with the experimental results.     

MgI2-catalyzed halo aldol reaction: a practical approach to (E)-beta-iodovinyl-beta'-hydroxyketones

A novel generation of 1-iodo-3-siloxy-1,3-butadienes has been developed by reacting trimethylsilyl iodide (TMS-I) with alpha, beta-unsaturated ketones in dichloromethane at 0 degrees C without the use of any catalyst. The halo aldol reaction of these butadiene intermediates with aldehydes was efficiently carried out by using magnesium iodide as the catalyst. Twelve beta-iodo-alpha,beta-unsaturated-beta'-hydroxyketones (halo aldols) have been synthesized under the new condition with excellent geometric selectivity and good chemical yields (>80% chemical yields for 11 examples).     

Highly anti-selective asymmetric aldol reactions using chiral zirconium catalysts. Improvement of activities, structure of the novel zirconium complexes, and effect of a small amount of water for the preparation of the catalysts

Catalytic asymmetric aldol reactions of silyl enol ethers with aldehydes (Mukaiyama aldol reactions) have been performed using novel chiral zirconium catalysts. The reactions proceeded in high yields under mild conditions, and anti-adducts were obtained in high diastereo- and enantioselectivities. The catalysts were first prepared from zirconium(IV) tert-butoxide (Zr(O(t)Bu)(4)), (R)-3,3'-diiodo-1,1'-binaphthalene-2,2'-diol ((R)-3,3'-I(2)BINOL), a primary alcohol, and a small amount of water. It was revealed that the primary alcohol played an important role in completing the catalytic cycle and that a small amount of water was essential for obtaining high selectivities. Moreover, activities of the chiral zirconium catalysts were enhanced by using new ligands, (R)-3,3'-I(2)-6,6'-X(2)BINOL (X = Br, I, C(2)F(5)), and it has been shown that even aldol reactions of less reactive substrates proceeded smoothly using the novel zirconium catalysts. Finally, NMR studies of these catalysts were performed, which suggested that the catalyst would form a dimeric structure and that the water affected the catalyst formation.     

Kinetics and mechanism of ligand exchange of coordinated cyanide in hexacyanoferrate(II) by nitroso‐R‐salt in the presence of mercury(II) as a catalyst

The kinetics of Hg(II)‐catalyzed reaction between hexacyanoferrate(II) and nitroso‐R‐salt has been followed spectrophotometrically by monitoring the increase in absorbance at 720 nm, the λ_max of green complex, [Fe(CN)₅ N‐R‐salt]^3? as a function of pH, ionic strength, temperature, concentration of reactants, and the catalyst. In this reaction, the coordinated cyanide ion in hexacyanoferrate(II) gets replaced by incoming N‐R‐salt under the following specified reaction conditions: temperature = 25 ± 0.1°C, pH = 6.5 ± 0.2, and I = 0.1 M (KNO₃). The stoichiometry of the complex has been established as 1:1 by mole ratio method. The rate of catalyzed reaction is slow at low pH values and then increases with pH and attains a maximum value between 6.5 and 6.7. The rate finally falls again at higher pH values due to nonavailability of [H⁺] ions needed to regenerate the catalytic species. The rate of reaction increases initially with [N‐R‐salt] and attains a maximum value and then levels off at higher [N‐R‐salt]. The rate of reaction shows a variable order dependence in [Fe(CN)₆^4?] ranging from unity at lower concentration to 0.1 at higher concentrations. The effect of [Hg²⁺] on the reaction rate shows a complex behavior and the same has been explained in detail. The activation parameters for the catalyzed reactions have been evaluated. A most plausible mechanistic scheme has been proposed based on the experimental observations. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 222–232, 2005     

Simple synthesis of alpha-hydroxyamino carbonyl compounds: new scope of the nitroso aldol reaction

[reaction: see text] The reaction of nitroso compounds with enolates, "the nitroso aldol reaction", occurs in high yield to generate alpha-hydroxyamino carbonyl compounds. Yields range from 42% to 98% with N-selectivity >99:1 from commercially available aromatic or aliphatic nitroso compounds and a variety of alkali metal or tin enolates.     

Hydrophobic polymer-supported scandium catalyst for carbon-carbon bond-forming reactions in water

It has been revealed that a hydrophobic polymer-supported scandium(III) catalyst prepared from sulfonated polystyrene resin is an effective catalyst for carbon-carbon bond-forming reactions such as Mukaiyama aldol reactions in water. According to studies on loading levels of scandium, hydrophobicity of the catalyst is a key for the efficient catalysis. The scandium catalyst was successfully recovered and reused. Several ketones instead of aldehydes were also used as substrates in the aldol reactions. Some 1,4-addition reactions also occurred using the scandium catalyst in water.     

Brønsted Acid Assisted Regio‐ and Enantioselective Direct O‐Nitroso Aldol Reaction Catalysed by α,α‐Diphenylprolinol Trimethylsilyl Ether

In the presence of p‐nitrobenzoic acid, the O‐nitroso aldol reaction of nitrosobenzene with enolisable aldehydes may be promoted by commercially available α,α‐diphenylprolinol trimethylsilyl ether. The reaction proceeds with good yields and essentially complete enantioselectivity, with catalyst loadings in the 5–10 mol % range. The resulting α‐oxyaldehyde adducts may be transformed in situ into α‐oxyimines, which provide 1,2‐amino alcohols upon treatment with Grignard reagents, in good overall yield (45–59 %) and with typical diastereomeric ratios ≥95:5.     

Direct catalytic asymmetric aldol additions of methyl ynones. Spontaneous reversal in the sense of enantioinduction

In this Communication, we report the direct, catalytic, asymmetric aldol addition of methyl ynones using our dinuclear zinc catalyst. A spontaneous reversal in the sense of enantioinduction was observed for these reactions; formation of the (S)-enantiomer is favored in the early stages (69% ee after 5 min), whereas the (R)-enantiomer is isolated as the major product after prolonged reaction times (97% ee after 22 h). It could be shown that this reversal in enantioselectivity is due to formation of a new catalytic species which incorporates the aldol product.     

镍—亚硝基红盐—氯化癸基吡啶体系的络合物吸附波研究及应用

在0.020mol/硼砂-0.0030％亚硝基红盐-0.0040％氯化癸基吡啶体系中,镍有一灵敏的络合物吸附波,峰电位-0.55V(υs. Ag/AgCl),线性范围0.2～1600ng/ml,可用于水样和发样的测定。镍与亚硝基红盐形成1:3的二元络合物。络合物在滴汞电极上的吸附,低浓度符合Langmuir吸附等温线,高浓度符合Frumkin吸附等温线。