首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
Continuous-time core-level photon-stimulated desorption (PSD) spectroscopy was used to study the soft x-ray-induced reactions of CF(3)Br molecules adsorbed on Si(111)-7×7 near the Si(2p) edge (98-110 eV). The monochromatic synchrotron radiation was employed as a soft x-ray light source in the photon-induced reactions and also as a probe for investigating the produced fluorination states of the bonding surface Si atom in the positive-ion PSD spectroscopy. Several different surface coverages were investigated. The PSD spectra from the low-CF(3)Br-covered surfaces show the production of surface SiF species, while those from the high-CF(3)Br-covered surfaces depict the formation of surface SiF, SiF(2), and SiF(3) species. The photolysis cross section of the submonolayer CF(3)Br-covered surface is determined as ~4.3×10(-18) cm(2). A comparison with the results on CF(3)Cl/Si(111)-7×7 surface is discussed.  相似文献   

2.
Surface modification of Ar plasma-pretreated poly(tetrafluoroethylene) (PTFE) and poly(vinylidene fluoride) (PVDF) films via UV-induced graft copolymerization with 4-vinylpyridine (4VP), 2-vinylpyridine (2VP) or 1-vinylimidazole (VIDz) was carried out. Electroless deposition of nickel could be carried out on these graft-modified fluoropolymer surfaces after PdCl2 activation. The surface compositions of the graft-modified films were studied by X-ray photoelectron spectroscopy. The adhesion strength between the surface graft-copolymerized fluoropolymer film and the electrolessly deposited nickel was affected by the type of monomers used for graft copolymerization and the graft concentration. The optimum T-peel adhesion strengths of the electrolessly deposited Ni on the 4VP graft-copolymerized PTFE and PVDF surfaces were about 7 and 13 N/cm, respectively. The metal/fluoropolymer assemblies delaminated by cohesive failure inside the fluoropolymer substrates. The enhanced adhesion between the electrolessly deposited Ni and the surface-modified fluoropolymers is attributable to the interfacial charge transfer interactions between the grafted polymer chains and the deposited metals (Pd and Ni), the spatial distribution of the graft chains into the metal matrix and the covalent tethering of the graft chains on the fluoropolymer surface.  相似文献   

3.
通过对聚乙烯醇(PVA)/季铵化羟乙基乙氧基纤维素(QHECE)共混膜进行聚乙二醇(PEG)聚塑化改性, 采用物理-化学交联联用法制备了PVA/QHECE/PEG碱性阴离子交换复合膜. 通过交流(AC)阻抗、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)、 热重分析(TGA)、 气相色谱(GC)和拉伸实验等手段考察了不同PEG添加量对膜的离子电导率、 分子结构、 微观形貌、 热稳定性、 力学强度、 甲醇渗透率和耐碱稳定性等性能. 结果表明, PEG的加入(除最小比例外)提高了膜的离子电导率和力学强度并使其柔韧性增大. 同时, 膜的热稳定性比未添加PEG时提高了40℃. 将PVA/QHECE/PEG膜在80℃, 6 mol/L KOH浓碱溶液中浸渍处理264 h, 膜的电导率从1.06×10-3 S/cm提高到3.88×10-3 S/cm, 而膜的外观和力学强度及含水率未发生明显变化, 表明该膜具有很好的耐碱化学稳定性. 此外, 以3 mol/L甲醇溶液为测试目标, 膜的甲醇渗透率<10-7 cm2/s, 仅为商业用Nafion®膜的1/20~1/40.  相似文献   

4.
Two reaction schemes were developed to covalently graft poly(ethylene glycol) (PEG) chains on poly(ethylene-co-acrylic acid) (EAA) surfaces. The schemes involved surface grafting of linker molecules L-lysine or polypropyleneamine dendrimer (AM64), with subsequent covalent bonding of PEG chains to the linker molecules. NHS and EDC were used to activate the carboxylic acid groups of the EAA in the outermost region of the film, estimated to be 20 nm by ATR-FTIR spectroscopy. XPS demonstrated that the conversion of this activation step was almost 100% in the detected region. After activation, L-lysine or dendrimer was grafted onto the EAA surface, followed by PEG grafting. Combining the data from ATR-FTIR, XPS, and contact angle goniometry, it was found that the PEG chains were grafted on the surface of the EAA film and larger surface coverage was achieved when the dendrimer was used as the intermediate layer. This surface also had the lowest water contact angle.  相似文献   

5.
Poly(ethylene oxide) (PEO) and low molecular weight poly(ethylene glycol) (PEG) were covalently immobilized on silicon wafers and gold films by way of the CH insertion reaction of perfluorophenyl azides (PFPAs) by either photolysis or thermolysis. The immobilization does not require chemical derivatization of PEO or PEG, and polymers of different molecular weights were successfully attached to the substrate to give uniform films. Microarrays were also generated by printing polymer solutions on PFPA-functionalized wafer or Au slides followed by light activation. For low molecular weight PEG, the immobilization was highly dependent on the quality of the film deposited on the substrate. While the spin-coated and printed PEG showed poor immobilization efficiency, thermal treatment of the PEG melt on PFPA-functionalized surfaces resulted in excellent film quality, giving, for example, a grafting density of 9.2×10(-4)?(-2) and an average distance between grafted chains of 33? for PEG 20,000. The anti-fouling property of the films was evaluated by fluorescence microscopy and surface plasmon resonance imaging (SPRi). Low protein adsorption was observed on thermally-immobilized PEG whereas the photoimmobilized PEG showed increased protein adsorption. In addition, protein arrays were created using polystyrene (PS) and PEG based on the differential protein adsorption of the two polymers.  相似文献   

6.
Composite films of polyimide (PI) and poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) or of PI and poly(tetrafluoroethylene) (PTFE) were prepared by thermal imidization of the poly(amic acid) (PAA) precursors of poly(pyromellitic dianhydride-4,4′-oxydianiline) (PMPA-ODA) on glycidyl methacrylate (GMA) graft-copolymerized FEP and PTFE films. The resulting PI/GMA-g-FEP and PI/GMA-g-PTFE composites exhibited T-peel adhesion strength of approximately 7.0 and 6.5 N/cm, respectively, compared to negligible adhesion strength for the laminates prepared from thermal imidization of the PAA on the pristine and the Ar plasma-treated FEP and PTFE films. X-ray photoelectron spectroscopy (XPS) results revealed that both the PI/GMA-g-FEP and PI/FEP-g-PTFE composite films delaminated by cohesive failure inside the FEP and PTFE films, respectively. The so-delaminated PI films with a covalently tethered FEP or PTFE surface layer were highly hydrophobic, having static water contact angles above 140°. The highly hydrophobic property depends on both the composition and roughness of the delaminated surface.  相似文献   

7.
The electrostatic adsorption onto charged surfaces of comb copolymers comprising a polyelectrolyte backbone and pendent PEG side chains, such as poly(l-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), has in previous studies provided protein-repellent thin coatings, particularly on metal oxide surfaces. A drawback of this approach is, however, the instability of such adsorbed layers under extreme pH values or high ionic strength. We have overcome this limitation in the present study by covalently immobilizing PLL-g-PEG copolymers onto aldehyde plasma-modified substrates. Silicon wafers, optical waveguide chips, and perfluorinated ethylene-co-propylene (FEP) polymer substrates were first coated with a thin plasma polymer layer using a propionaldehyde plasma, followed by covalent immobilization of PLL-g-PEG via reductive amination between amine groups of the PLL backbone with aldehyde groups on the plasma-deposited interlayer. The stability in high salt media and the protein resistance of different molecular architectures of immobilized PLL-g-PEG layers were quantitatively investigated by XPS, an optical waveguide technique (OWLS), and ToF-SIMS. The adsorption of bovine serum albumin was found to be below the detection limit (<2 ng/cm(2)), as for electrostatically adsorbed PLL-g-PEG layers. However, after 24 h of exposure of covalently immobilized layers of PLL-g-PEG to high ionic strength buffer (2400 mM NaCl), no significant change in the protein resistance was observed, whereas under the same conditions electrostatically adsorbed PLL-g-PEG coatings lost their protein resistance. Moreover, covalent immobilization via an aldehyde plasma interlayer enabled the application of PLL-g-PEG layers onto substrates such as FEP onto which electrostatic binding is not possible. These findings create a generic platform for the covalent immobilization of PLL-g-PEG onto a wide variety of substrates.  相似文献   

8.
Ozone treatment is an efficient economical, alternative method for surface activation of poly(dimethylsiloxane) (PDMS). This is illustrated by the derivatization of a PDMS surface with (3-aminopropyl)triethoxysilane (APTES). The apparent surface concentration of amino groups was found to be ca. 10(-8) mol/cm2 using UV/visible spectroscopy of the product from the reaction of the amino groups and fluorescamine. Potential application for micropatterning of biologically active interfaces was demonstrated by the covalent immobilization of oligonucleotides. A simple process for photolithographic patterning on PDMS surfaces has been developed.  相似文献   

9.
Antimicrobial surfaces were prepared using the "grafting onto" technique. Well-defined block copolymers containing poly(2-(dimethylamino)ethyl methacrylate) and poly(3-(trimethoxysilyl)propyl methacrylate) segments (PDMAEMA/PTMSPMA) and corresponding random copolymers were prepared via atom transfer radical polymerization (ATRP), followed by covalent attachment to a glass surface through reaction of the trimethoxysilyl groups with surface silanol groups. The density of quaternary ammonium (QA) groups available to bind small molecules in solution increased with polymer solution concentration and immobilization time. For the PDMAEMA 97- b-PTMSPMA xdiblock copolymers with a fixed length of PDMAEMA segment (degree of polymerization (DP) = 97) and varied lengths of PTMSPMA segments, maximal available surface charge was observed when the ratio of DP PDMAEMA to DP PTMSPMA was 5:1. The tertiary amino groups in immobilized PDMAEMA segments were reacted with ethyl bromide to form QA groups. Alternatively, block copolymers with prequaternized PDMAEMA segments were attached to surfaces. Biocidal activity of the surfaces with grafted polymers versus Escherichia coli ( E. coli) increased with the density of available QA units on the surface. The number of bacteria killed by the surface increased from 0.06 x 10(5) units/cm2 to 0.6 x 10(5) units/cm2, when the density of surface QA increased from 1.0 x 10(14) unit/cm2 to 6.0 x 10(14) unit/cm2. The killing efficiency of QA on all surfaces was similar with approximately 1 x 10(10) units of QA needed to kill one bacterium. The AFM analysis indicated that grafting onto the surface resulted in small patches of highly concentrated polymer. These patches appear to increase the killing efficiency as compared to surfaces prepared by grafting onto with the same average polymer density but with a uniform distribution.  相似文献   

10.
Biomimetic coatings offer exciting options to modulate the biocompatibility of biomaterials. The challenge is to create surfaces that undergo specific interactions with cells without promoting nonspecific fouling. This work reports an innovative approach toward biomimetic surfaces based on the covalent immobilization of a carboxylate terminated PEGylated hyaluronan (HA-PEG) onto plasma functionalized NiTi alloy surfaces. The metal substrates were aminated via two different plasma functionalization processes. Hyaluronan, a natural glycosaminoglycan and the major constituent of the extracellular matrix, was grafted to the substrates by reaction of the surface amines with the carboxylic acid terminated PEG spacer using carbodiimide chemistry. The surface modification was monitored at each step by X-ray photoelectron spectroscopy (XPS). HA-immobilized surfaces displayed increased hydrophilicity and reduced fouling, compared to bare surfaces, when exposed to human platelets (PLT) in an in vitro assay with radiolabeled platelets (204.1 +/- 123.8 x 10 (3) PLT/cm (2) vs 538.5 +/- 100.5 x 10 (3) PLT/cm (2) for bare metal, p < 0.05). Using a robust plasma patterning technique, microstructured hyaluronan surfaces were successfully created as demonstrated by XPS chemical imaging. The bioactive surfaces described present unique features, which result from the synergy between the intrinsic biological properties of hyaluronan and the chemical composition and morphology of the polymer layer immobilized on a metal surface.  相似文献   

11.
Affinity dye-ligand Cibacron Blue F3GA(CB F3GA) was covalently coupled with poly(vinyl alcohol)(PVA) coated on the inner surface of microporous poly(tetra-fluoroethylene)(MPTFE) membranous capillary. The PVA-coated PTFE capillary surface was characterized by XPS and FESEM. The grafting degree of PVA and the amount of CB F3GA immobilized onto the membranous capillary were 23.5 mg/g and 89.6 pmol/g, respectively. These dyed membranous capillaries were chemically and mechanically stable, and could be reproducibly prepared. Human serum albumin(HSA) was selected as model protein. The saturation adsorbance of the dye attached membranous capillary was 85.3 mg HSA/g, while the capacity of non-specific adsorption for HSA was less than 0.3 mg/g.  相似文献   

12.
Control over biointerfacial interactions on material surfaces is of significant interest in many biomedical applications and extends from the modulation of protein adsorption and cellular responses to the inhibition of bacterial attachment and biofilm formation. Effective control over biointerfaces is best achieved by reducing nonspecific interactions on the surface while also displaying specific bioactive signals. A poly(ethylene glycol) (PEG)‐based multifunctional coating has been developed that provides effective reduction of protein fouling while enabling covalent immobilization of peptides in a one or two‐step manner. The highly protein resistant properties of the coating, synthesized via the crosslinking of PEG diepoxide and diaminopropane, are confirmed via europium‐labeled fibronectin adsorption and cell attachment assays. The ability to covalently incorporate bioactive signals is demonstrated using the cyclic peptides cRGDfK and cRADfK. L929 cells show enhanced attachment on the biologically active cRGDfK containing surfaces, while the surface remains nonadhesive when the nonbiologically active cRADfK peptide is immobilized. The crosslinked PEG‐based coating also demonstrates excellent resistance toward Staphylococcus aureus attachment in a 48 h biofilm assay, achieving a >96% reduction compared to the control surface. Additionally, incorporation of the antimicrobial peptide melimine during coating formation further significantly decreases biofilm formation (>99%).

  相似文献   


13.
In this study, click chemistry was proposed as a tool for tuning the surface hydrophilicity of monodisperse-macroporous particles in micron-size range. The monodisperse-porous particles carrying hydrophobic or hydrophilic molecular brushes on their surfaces were obtained by the proposed modification. Hydrophilic poly(glycidyl methacrylate-co-ethylene dimethacrylate), poly(GMA-co-EDM) particles were hydrophobized by the covalent attachment of poly(octadecyl acrylate-co-propargyl acrylate), poly(ODA-co-PA) copolymer onto the particle surface via triazole formation by click chemistry. In the second part, Hydrophobic poly(4-chloromethylstyrene-co-divinylbenzene), poly(CMS-co-DVB) particles were hydrophilized by the covalent attachment of poly(vinyl alcohol), PVA onto their surface also via triazole formation by click chemistry. The presence of PVA and poly(ODA-co-PA) copolymer on the corresponding particles was shown by FTIR-DRS. After click-coupling reactions applied for both hydrophobic poly(CMS-co-DVB) and hydrophilic poly(GMA-co-EDM) particles, the marked changes in surface polarity were shown by contact angle measurements. Protein adsorption characteristics of plain and modified particles were investigated for both materials. In the isoelectric point of albumin, the non-specific albumin adsorption decreased from 225 to 80 mg/g by grafting PVA onto the poly(CMS-co-DVB) beads. On the other hand, the non-specific albumin adsorption onto the plain poly(GMA-co-EDM) beads increased from 50 to 400 mg/g by the covalent attachment of poly(ODA-co-PA) copolymer onto the bead-surface via click chemistry. The protein adsorption behavior was efficiently regulated by the covalent attachment of appropriate molecular brushes onto the surfaces of selected particles. The results indicated that "click chemistry" was an efficient tool for controlling the polarity of monodisperse-macroporous particles.  相似文献   

14.
Arya SK  Singh A  Naidoo R  Wu P  McDermott MT  Evoy S 《The Analyst》2011,136(3):486-492
A bioassay platform using T4 bacteriophage (T4) as the specific receptor and surface plasmon resonance (SPR) as the transduction technique has been developed for the detection of Escherichia coli K12 bacteria. The T4 phages have been covalently immobilized onto gold surfaces using a self-assembled monolayer of dithiobis(succinimidyl propionate) (DTSP). Substrates of BSA/EA-T4/DTSP/Au prepared using different T4 phage concentrations have been characterized using scanning electron microscopy (SEM). The studies reveal that the use of DTSP results in a uniform binding of T4 phages onto the surface. The SPR analysis demonstrates that these BSA/EA-T4/DTSP/Au interfaces can detect the E. coli K12 with high specificity against non-host E. coli NP10 and NP30. Results of SEM and SPR studies indicate that the maximum host bacterial capture is obtained when 1.5 × 10(11) pfu ml(-1) concentration of T4 phages was used for immobilization. The surface of these chemically anchored phage substrates can be regenerated for repeated detection of E. coli K12 and can be used for detection in 7 × 10(2) to 7 × 10(8) cfu ml(-1) range. The results of these studies have implications for the development of online bioassays for the detection of various food and water borne pathogens using the inherent selectivity of bacteriophage recognition.  相似文献   

15.
Tetrathiafulvalene (TTF) monolayers covalently bound to oxide-free hydrogen-terminated Si(100) surfaces have been prepared from the hydrosilylation reaction involving a TTF-terminated ethyne derivative. FTIR spectroscopy characterization using similarly modified porous Si(100) substrates revealed the presence of vibration bands assigned to the immobilized TTF rings and the Si-C═C- interfacial bonds. Cyclic voltammetry measurements showed the presence of two reversible one-electron systems ascribed to TTF/TTF(.+) and TTF(.+)/TTF(2+) redox couples at ca. 0.40 and 0.75 V vs SCE, respectively, which compare well with the values determined for the electroactive molecule in solution. The amount of immobilized TTF units could be varied in the range from 1.7 × 10(-10) to 5.2 × 10(-10) mol cm(-2) by diluting the TTF-terminated chains with inert n-decenyl chains. The highest coverage obtained for the single-component monolayer is consistent with a densely packed TTF monolayer.  相似文献   

16.
This work reports the surface‐initiated atom transfer radical polymerization (ATRP) from hydrogen plasma‐treated porous poly(tetrafluoroethylene) (PTFE) membranes using the C? F groups as initiators. Hydrogen plasma treatment on PTFE membrane surfaces changes their chemical environment through defluorination and hydrogenation reactions. With the hydrogen plasma treatment, the C? F groups of the modified PTFE membrane surface become effective initiators of ATRP. Surface‐initiated ATRP of poly(ethylene glycol) methacrylate (PEGMA) is carried out to graft PPEGMA chains to PTFE membrane surfaces. The chain lengths of poly(PEGMA) (PPEGMA) grafted on PTFE surfaces increase with increasing the reaction time of ATRP. Furthermore, the chain ends of PPEGMA grown on PTFE membrane surfaces then serve as macroinitiators for the ATRP of N‐isopropylacrylamide (NIPAAm) to build up the PPEGMA‐b‐PNIPAAm block copolymer chains on the PTFE membrane surfaces. The chemical structures of the modified PTFE membranes are characterized using X‐ray photoelectron spectroscopy. The modification increases the surface hydrophilicity of the PTFE membranes with reductions in their water‐contact angles from 120° to 60°. The modified PTFE membranes also show temperature‐responsive properties and protein repulsion features owing to the presence of PNIPAAM and PPEGMA chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2076–2083, 2010  相似文献   

17.
This paper reports a simple microwave plasma patterning of poly(dimethylsiloxane) (PDMS) surfaces, which is accomplished by allowing selective surface areas to microwave plasma exposure in the presence of gaseous monomer. When maleic anhydride is used for microwave plasma reaction in the presence of physical barrier on the PDMS substrate, the resulting patterned surfaces with chemically bonded maleic anhydride and carboxylic acid groups are generated. In this particular study we attached amoxicillin via ammonolysis under weak base conditions in the presence of a catalyst as well as poly(ethyleneglycol) (PEG). A combination of internal reflection IR imaging (IRIRI) and atomic force microscopy (AFM) revealed that amoxicillin and PEG can be readily reacted on the microwave plasma patterned PDMS surfaces. Surface areas directly exposed to microwave plasmons exhibit the highest reactivity due to higher content of functional groups. These studies also show that molecular weight of PEG has also significant effect on kinetics of surface reactions.  相似文献   

18.
Adsorbed gels versus brushes: viscoelastic differences   总被引:1,自引:0,他引:1  
It is of fundamental importance to be able to easily distinguish between the viscoelastic properties of a molecular gel (noncovalent cross-linked three-dimensional polymer structure) and a brush (polymer structure that emanates from a surface in three dimensions without cross-linking). This has relevance in biology and in designing surfaces with desired chemical and viscoelastic properties for nano and genomic technology applications. Agarose and thiol-tagged poly(ethylene glycol) were chosen as model systems, as they are known, on adsorption, to behave like a molecular gel and brush, respectively. Here, we focus on their viscoelastic differences using a quartz crystal microbalance with dissipation monitoring (QCM-D). Changes in resonance frequency and dissipation for three overtones using QCM-D were fitted with the Voigt viscoelastic model to calculate the shear viscosity and shear modulus for the adsorbed agarose gel and the PEG brush. At a surface coverage of 500 ng/cm2, the shear viscosities and shear moduli were 0.0025 +/- 0.0002 Pa-s and 2.0 +/- 0.17 x 105 Pa and 0.0010 +/- 0.0001 Pa-s and 5.0 +/- 0.3 x 104 Pa for the gel and brush, respectively. Thus, the adsorbed agarose gel layer was far more rigid than that of the covalently bound PEG brush due to its cross-linked network. Also, the diffusivity of agarose and PEG in solution was compared during adsorption onto a bare gold surface. The estimated value for the effective diffusivity of the PEG (without a thiol tag) and of the agarose gel was on the order of 10(-11) and 10(-15) m2/s, respectively. This low diffusivity for agarose supports the contention that it exists as a molecular gel with a H-bonded cross-linked network in aqueous solution. With the methods used here, it is relatively easy to distinguish the differences in viscoelastic properties between an adsorbed gel and brush.  相似文献   

19.
This study employed real-time in situ STM imaging to examine the adsorption of PEG molecules on Pt(111) modified by a monolayer of copper adatoms and the subsequent bulk Cu deposition in 1 M H(2)SO(4) + 1 mM CuSO(4)+ 1 mM KCl + 88 μM PEG. At the end of Cu underpotential deposition (~0.35 V vs Ag/AgCl), a highly ordered Pt(111)-(√3 × √7)-Cu + HSO(4)(-) structure was observed in 1 M H(2)SO(4) + 1 mM CuSO(4). This adlattice restructured upon the introduction of poly(ethylene glycol) (PEG, molecular weight 200) and chloride anions. At the onset potential for bulk Cu deposition (~0 V), a Pt(111)-(√3 × √3)R30°-Cu + Cl(-) structure was imaged with a tunneling current of 0.5 nA and a bias voltage of 100 mV. Lowering the tunneling current to 0.2 nA yielded a (4 × 4) structure, presumably because of adsorbed PEG200 molecules. The subsequent nucleation and deposition processes of Cu in solution containing PEG and Cl(-) were examined, revealing the nucleation of 2- to 3-nm-wide CuCl clusters on an atomically smooth Pt(111) surface at overpotentials of less than 50 mV. With larger overpotential (η > 150 mV), Cu deposition seemed to bypass the production of CuCl species, leading to layered Cu deposition, starting preferentially at step defects, followed by lateral growth to cover the entire Pt electrode surface. These processes were observed with both PEG200 and 4000, although the former tended to produce more CuCl nanoclusters. Raising [H(2)SO(4)] to 1 M substantiates the suppressing effect of PEG on Cu deposition. This STM study provided atomic- or molecular-level insight into the effect of PEG additives on the deposition of Cu.  相似文献   

20.
Poly(glycidyl methacrylate), PGMA, chains in linear and arborescent structures were incorporated onto surfaces of poly(tetrafluoroethylene), PTFE, films by hydrogen plasma and ozone treatment and atom transfer radical polymerization. The epoxide groups of the PGMA chains were further reacted with acetic acid (AAc), oxalic acid (XAc), allyl amine (AA), and ethylenediamine (EDN) to introduce hydroxyl and amine groups to the surfaces of the PTFE films. Surface characterizations performed by Fourier Transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the surface modification and the chemical structure. The PGMA chains in arborescent structures show a high effectiveness for the enhancement of the adhesion of PTFE films. The adhesion of PTFE films was also significantly enhanced by ring-opening reactions of the PGMA epoxide groups with acetic acid and amine compounds. A high value of 9.5 N cm(-1) in the optimum 180 degrees peel strength test was observed with PTFE/copper assemblies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号