Linear Dynamical Identification: An Integral Transform seen as a Complex Wavelet Transform

This paper presents a technique that allows the direct linearidentification of frequency response functions from the computation ofa weighted integral transform. This transform allows toemphasize the influence of the poles and zeros of the frequencyresponse functions its formation is based on the Cauchy--Weierstrass theorem. It isthen shown that this transform is directly linked to a complex wavelettransform. This representation with a wavelet transform provides abetter understanding of the amplification effects of the weightedintegral transform and allows the singularities analysis.     

基于小波变换及Wigner-Ville变换方法的超声导波信号分析

对结构中缺陷的检测和识别是无损检测中的一项重要研究课题,超声导波由于可在短时间内检测很远距离,故它的一个重要应用便是管材的检测。因而对导波检测信号的处理成为一重要研究内容,本文利用时-频分析方法中的小波变换和Wigner-Ville变换对管道和抽油杆缺陷的导波检测信号进行了分析处理。实验结果表明,进行小波变换后,缺陷回波信号的信噪比大大提高,直径仅1mm的小孔缺陷可容易地被识别出来,准确检测出其位置;通过对信号进行Wigner-Ville的相关变换,可同时在时频两域内对缺陷的回波信号进行分析,使缺陷辨别起来简单易行。两种信号处理方法的超声导波应用研究为以后导波信号的处理提供了新的实现依据。     

Application of multi-dimensional wavelet transform to fluid mechanics

This paper first reviews the application research works of wavelet transform on the fluid mechanics. Then the theories of continuous wavelet transform and multi-dimensional orthogonal(discrete) wavelet transform, including wavelet multiresolution analysis, are introduced. At last the applications of wavelet transform on 2 D and 3 D turbulent wakes and turbulent boundary layer flows are described based on the hot-wire, 2 D particle image velocimetry(PIV) and 3 D tomographic PIV.     

小波分析在捷联惯导陀螺信号滤波中的应用

介绍了小波变换和多分辨率分析理论。针对捷联惯导系统中光纤陀螺输出信号的特点，对其进行小波变换，去除信号中高频部分的噪声，从而抑制了陀螺的随机漂移。通过仿真实验，肯定了使用小波分析算法对陀螺输出信号进行滤波消噪处理的可行性。在实际用于捷联惯导系统中的实验结果表明，有效地提高了系统的精度。     

Damage detection using the Lipschitz exponent estimated by the wavelet transform: applications to vibration modes of a beam

Damage detection by the wavelet transform of the fundamental vibration mode receives much attention recently. Many investigations report successful applications of the wavelet transform in damage detection, but most of them appear to lack theoretical justifications. The objective of this contribution is to show the effectiveness of the wavelet transform by means of its capability to estimate the Lipschitz exponent. It is also addressed that the magnitude of the Lipschitz exponent can be used as a useful indicator of the damage extent. As a specific example, damaged beams are investigated both numerically and experimentally. The continuous wavelet transform (CWT) by a Mexican hat wavelet having two vanishing moments is utilized for the estimation of the Lipschitz exponent. The analysis by the CWT also gives a guideline to choose appropriate discrete wavelet transforms.     

爆破振动信号的HHT时频能量谱分析

采用希尔伯特-黄变换对爆破振动信号进行时频能量谱分析。经验模态分解中采用了极值点对称 延拓消除端点效应,采用分段三次Hemite保形插值算法插值拟合消除欠包络现象以及筛分终止局部准则; 对于传统HHT 计算瞬时频率的负峰问题采用了标准化和直接正交法解决。采用了LabView 平台实现,提 高了计算效率和实用性。     

基于小波变换的爆破振动信号能量分布特征分析

为了深入研究爆破地震波特性,应用小波变换方法对具有短时非平稳特点的爆破振动信号进行了能量分布特征分析。根据小波变换的时-频特性和分层分解展开关系,将爆破振动时间历史信号用分层重构信号进行扫描,应用这些信号得到了不同频率带上爆破振动的相对能量分布和振动强度的时间变化规律。爆破振动信号实测结果分析表明,基于小波变换的能量分布特征分析可以更准确地给出爆破振动信号的细节信息。研究结果为分析爆破振动结构安全性提供了新的途径。     

The wavelet analysis method of stationary random processes

I.IntroductionRalldomvibrationoftenoccursinpracticalellgilleeringproblclllsl'l.Forexalllple,theunevellroadexcitesthewheelwithuncertainnZagnitudeandirregulartimelapseandresultsinrandonlvibrationofvehicle,whcllsufferingfromearthquakeor11urricallc,tilestructurewillvibraterandomly.Thewaytostudyrandomvibrationisusillgmathematicaltool,randomprocessestheory,todcalwithvibrationproblem,soitisveryilnporlant1'L,r1.alldomvibrationstudyingtostudytilel.andolllprocesses.Genel'ally.thestudyofrandomprocesses…     

基于小波变换的重力变化信号处理技术研究

针对重力敏感器中所测信号的特点，提出了小波变换的多分辨率分析方法。采用了强制去噪和阈值去噪两种方法，利用Daubechies小波函数，分别针对三种典型情况进行了分析。结果表明，对于信噪比非常小的重力变化信号，阈值去噪法相对于强制去噪法来说效果并没有明显提高，第9层下重建信号的逼近误差满足性能指标。文中还讨论了加入确定性干扰的情况下微弱信号的提取情况，结果表明，加入大的确定性干扰后，为了满足设计要求，小波分解的尺度有所增加，整体的滤波效果与未加入确定性干扰的情况基本相同。     

基于小波变换的撞击流压力波动信号分析

通过小波变换对信号进行多尺度细化分析,解决了傅里叶变换不能解决的许多问题．从分析噪声和信号本身奇异点的区别入手,利用小波在时频两域突出信号局部特征能力的重要性质,即噪声信号小波变换的极大值随尺度的加大而显著减少的特点,对撞击流反应器撞击区压力波动信号进行处理分析．分析结果表明:小波变换可以较好地去除信号中的噪声;通过消噪后信号的功率谱可知,撞击流压力波动信号具有自相似的分形特征,与前期的实验研究相吻合．     

小波分析在圆柱壳结构损伤检测中的应用研究

为了检测出圆柱壳中的裂纹引起的损伤,利用sym4小波,对含裂纹圆柱壳的应变能曲线进行连续小波变换和多分辨分析,从小波系数出现局部模极大值来识别损伤的存在以及裂缝位置。通过分析和计算获得满意结果,表明此方法在圆柱壳结构损伤诊断中具有较高的应用价值。     

基于梁连续抗弯刚度与小波变换的结构损伤识别方法研究

为了解决基于小波变换系数难以识别结构边缘损伤的问题,以及试验中损伤对周边的影响导致小波系数难以精确定位损伤位置的问题,提出了基于梁连续抗弯刚度与小波变换的结构损伤位置识别方法。该方法结合梁结构连续抗弯刚度与小波系数边缘的特点,在未知无损梁结构振动参数的情况下,能有效识别出梁结构边缘损伤且能准确定位试验中梁结构的损伤,通过损伤梁的数值模拟与试验证明了该方法的正确性。     

流体饱和多孔隙介质波动方程多尺度反演

基于多尺度的思想,将小波多分辨分析和多尺度方法相结合,应用于流体饱和多孔隙介质孔隙率的反演。利用小波变换,将原始反问题分解为不同尺度上的一系列子反问题,并按照尺度从粗到细的顺序依次求解。在每一个尺度上,都采用稳定、收敛快的正则化高斯牛顿法求解,次一级尺度上求出的“全局最优解”作为上一级的初始解,依此类推,直到求出原始问题的真正的全局最优解。通过与传统的正则化高斯牛顿法相比较,显示了小波多尺度法是一个大范围收敛、能够有效节省计算量的方法,数值模拟的结果也表明了方法的有效性。     

多尺度有限差分方法求解波动方程

小波分析是多尺度分析方法，本文利用具有紧支集的正交小波变换对有限差分方程进行空间多尺度近似，提出适合于层状介质波传问题数值计算的多尺度有限差分方法，将波动方程的求解转换到小波域中进行。利用小波基的自适应性与消失矩特性，有效减少了计算量、提高了稳定性，扩大了可求解的速度范围。地球物理勘探中的数值实例显示了算法具有良好效率。     

铝板中激光Lamb波信号的模态分析与缺陷检测研究

激光激励的Lamb波信号具有较宽的频带,且包含多个模态信息。本文采用二维傅里叶变换和时频分析等信号分析技术用于检测信号中的模态成分及缺陷信息识别。首先,对200组激光Lamb波信号进行二维傅里叶变换,得到信号的频率-波数图,可识别出激光Lamb波信号中的低阶A0、S0和高阶模态,并且A0模态能量高,可用于缺陷检测。随后对有、无缺陷状态下Lamb波信号进行连续小波变换,从时频图中识别出缺陷信号的频率成分,进一步提取特定频率下的小波系数幅值信号,实现了缺陷信息的识别。结果表明,二维傅里叶变换能较好地识别激光Lamb波的模态成分,而提取出的连续小波变换系数图,能准确实现缺陷定位。     

Strain analysis for moiré interferometry using the two-dimensional continuous wavelet transform

In this paper, we introduce the two-dimensional continuous wavelet transform for the automated strain analysis of the moiré interference fringe pattern. The Fourier transform method has been widely used for automated analysis of an optical interference fringe pattern. However, this method is hardly applicable to the analysis of the fringe pattern, which includes large displacement range or discontinuities. We show the advantages of the wavelet transform method by applying it to experimental results on composite laminates.     

A new algorithm of the combination of image compression and encryption technology based on cross chaotic map

Since the size of the image file is not reduced after encryption, the flow rate of image file transmission cannot be reduced. Transmission time is wasted. To meet the requirements of security and real-time, wavelet transform and chaotic image encryption technology are combined. A cross-chaos map has been proposed based on Devaney’s theory. The image pixels are scrambled under the control of high-dimensional chaotic sequence, which is generated by the cross chaotic map. The image pixels are substituted by the ciphertext feedback algorithm. The algorithm can relate to encryption parameters with plaintext, and can make one plaintext byte affect more ciphertext bytes. In the process of image wavelet transform, image encryption and image compression are combined. The low frequency region of the wavelet transform is encrypted. Security analysis and experimental validation illuminated that the algorithm has high security, good encryption speed, and compression effect. The algorithm has good practical value.     

爆炸地震效应的时频分析

以一个爆炸地震地运动信号的测试结果为例,分别应用传统Fourier变换、短时Fourier变换(STFT)、连续小波变换(CWT)和离散小波变换(DWT)进行了对比分析,讨论了爆炸地震效应的时频分布问题。结果表明,小波变换方法可以更好地给出爆炸地震效应的细节信息。在频率值较高的频带上,地震能量可能较小,但振动的峰值强度却仍较大。     

Wavelet-based crack identification of bridge beam from operational deflection time history

A new method for crack identification of bridge beam structures under a moving load based on wavelet analysis is presented. Crack is modeled through rotational springs whose compliance is evaluated using linear elastic fracture mechanics. Dynamic behavior of the cracked beam subject to moving load is analyzed using mode superposition. The response obtained at a single measuring point is analyzed using continuous wavelet transform and the location of the cracks is estimated. The locations of the cracks are determined from the sudden changes in the spatial variation of the transform responses. To estimate the relative depth of the cracks, a damage factor is established which relates the size of the cracks to the coefficients of the wavelet transform. The proposed method is validated by both simulation and experiment. Locations of multiple damages can be located accurately, and the results are not sensitive to measurement noise, speed and magnitude of moving load, measuring location, etc.     

CRACK IDENTIFICATION IN STEPPED CANTILEVER BEAM COMBINING WAVELET ANALYSIS WITH TRANSFORM MATRIX

This paper illustrates the crack identification method combining wavelet analysis with transform matrix. Firstly, the fundamental vibration mode was applied to wavelet analysis. The crack location was found by the peaks of the wavelet coefficients. Secondly, based on the identified crack locations, a simple transform matrix method requiring only the first two tested natural frequencies was used to further identify the crack depth. The present method can be used for crack identification in a complex structure. Numerical results of crack identification of a stepped cantilever beam show that the suggested method is feasible.