Characterization and application to the detection of single-stranded DNA binding protein of fluorescent DNA-templated copper/silver nanoclusters

A simple strategy for the preparation of strongly fluorescent and stable DNA-Cu/Ag NCs from reduction of AgNO(3) and Cu(NO(3))(2) by NaBH(4) in the presence of DNA having a sequence 5'-CCCTTAATCCCC-3' has been demonstrated. Fluorescence, absorption, X-ray photoelectron spectroscopy (XPS), and electrospray ionization-mass spectrometry (ESI-MS) measurements have been applied to the characterization of the DNA-Cu/Ag NCs. The ESI-MS data reveal that each DNA-Cu/Ag NC contained 2 Ag and 1 Cu atoms. The interactions among DNA with the Ag and Cu atoms are further supported by the data of low-temperature fluorescence. In the presence of Cu(2+) ions, the reaction time is 1.5 h, which is much shorter than that (120 h) for the preparation of Ag-DNA NCs that are prepared in a mixture of AgNO(3), NaBH(4) and DNA without containing Cu(2+) ions. Relative to the DNA-Ag NCs, the DNA-Cu/Ag NCs have greater fluorescence (quantum yield 51.2% vs. 11.5%). The DNA-Cu/Ag NCs are highly sensitive and selective for the detection of single-stranded DNA binding protein (SSB), with a linear range 1-50 nM and a limit of detection 0.2 nM at a signal-to-ratio of 3.     

2-巯基苯并咪唑保护的铜纳米团簇的制备及银离子检测

以2-巯基苯并咪唑为保护剂,聚乙烯吡咯烷酮为稳定剂,水合肼为还原剂,“一锅法”合成2-巯基苯并咪唑保护的,高稳定性、强荧光、大斯托克斯位移的铜纳米团簇(Cu NCs),并用于检测水样中的银离子含量。采用透射电子显微镜(TEM)和X射线光电子能谱(XPS)对铜纳米团簇的结构进行表征,通过荧光光谱和紫外可见光谱对其光学性能进行研究。研究表明:该铜纳米团簇的最大激发和发射波长分别为340和558 nm,在日光灯和紫外灯下分别为无色和橙色。Cu NCs具有较高的分散性,尺寸大小为2~3 nm。在最佳反应条件下,铜纳米团簇可以选择性地被银离子猝灭,且灵敏度高,线性范围为1~40μmol/L,检测限为0.5μmol/L。该方法用于检测实际水样(自来水、湖水)中银离子的浓度,结果令人满意,表明在环境监测中有非常高的应用价值。     

脯氨酸保护的铜纳米团簇的制备及其在三硝基苯酚检测中的应用

以脯氨酸(Pro)为保护剂,盐酸羟胺为还原剂,通过一步化学还原法制备脯氨酸稳定的铜纳米团簇(Cu NCs)。采用分子荧光仪和紫外可见吸收仪对Cu NCs的光学性质进行分析,通过透射电子显微镜(TEM)、X射线光电子能谱(XPS)和傅里叶变换红外波谱仪(FTIR)对Cu NCs的结构进行表征。TEM图像显示Cu NCs的形貌为球状,平均直径为1.89 nm。Cu NCs溶液在紫外光下呈蓝色,最大激发和发射波长分别为397和458 nm。Cu NCs的荧光可以选择性地被三硝基苯酚(PA)猝灭。该探针对PA的线性响应范围为0.5～15μmol/L和20～70μmol/L,检测限为0.092μmol/L(S/N=3)。可能的检测机理是静态猝灭和内滤效应。此外,该荧光探针已成功应用于实际水样品中PA的测定。     

Thermal Decomposition of Copper(I) Thiocarbamide Chloride Hemihydrate

Two combinations of simultaneous thermoanalytical techniques (TG+DTA and TG+EGA) were used to study the thermal decomposition of the title compound in order to gain a better insight into the spray pyrolytic processes leading to Cu2-xS and CuInS2 thin films. After dehydration a complex sequence of reactions starts above 220°C leading through several intermediates to the formation of CuO in air at 1000°C. In an inert atmosphere Cu2S is formed which in helium above 800°C partly decomposes to Cu. XRD and FTIR were used to identify the intermediate solid phases which in air included CuCl, Cu2OSO4, Cu2OCl2 and CuSO4. EGA-FTIR confirmed the complex reaction mechanism with NH3, HCl, H2O, COS, CO2 and some HCN as main gaseous products under oxidative conditions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis, characterization, and structures of copper(II)-thiosulfate complexes incorporating tripodal tetraamine ligands

The reaction of [Cu(L)(H(2)O)](2+) with an excess of thiosulfate in aqueous solution produces a blue to green color change indicative of thiosulfate coordination to Cu(II) [L = tren, Bz(3)tren, Me(6)tren, and Me(3)tren; tren = tris(2-aminoethyl)amine, Bz(3)tren = tris(2-benzylaminoethyl)amine, Me(6)tren = tris(2,2-dimethylaminoethyl)amine, and Me(3)tren = tris(2-methylaminoethyl)amine]. In excess thiosulfate, only [Cu(Me(6)tren)(H(2)O)](2+) promotes the oxidation of thiosulfate to polythionates. Products suitable for single-crystal X-ray diffraction analyses were obtained for three thiosulfate complexes, namely, [Cu(tren)(S(2)O(3))].H(2)O, [Cu(Bz(3)tren)(S(2)O(3))].MeOH, and (H(3)Me(3)tren)[Cu(Me(3)tren)(S(2)O(3))](2)(ClO(4))(3). Isolation of [Cu(Me(6)tren)(S(2)O(3))] was prevented by its reactivity. In each complex, the copper(II) center is found in a trigonal bipyramidal (TBP) geometry consisting of four amine nitrogen atoms, with the bridgehead nitrogen in an axial position and an S-bound thiosulfate in the other axial site. Each structure exhibits H bonding (involving the amine ligand, thiosulfate, and solvent molecule, if present), forming either 2D sheets or 1D chains. The structure of [Cu(Me(3)tren)(MeCN)](ClO(4))(2) was also determined for comparison since no structures of mononuclear Cu(II)-Me(3)tren complexes have been reported. The thiosulfate binding constant was determined spectrophotometrically for each Cu(II)-amine complex. Three complexes yielded the highest values reported to date [K(f) = (1.82 +/- 0.09) x 10(3) M(-1) for tren, (4.30 +/- 0.21) x 10(4) M(-1) for Bz(3)tren, and (2.13 +/- 0.05) x 10(3) M(-1) for Me(3)tren], while for Me(6)tren, the binding constant was much smaller (40 +/- 10 M(-1)).     

Synthesis and characterization of a cobalt(III) complex with 1-(D-3-mercapto-2-methylpropionyl)-L-proline

The reaction of CoCl2 with 1-(D-3-mercapto-2-methylpropionyl)-L-proline (L or captopril) yields a new nanocrystalline complex with general formula [CoL2(OH)]2. The complex has been characterised with infrared (IR) and ultra-violet visible (UV-vis) spectroscopies, magnetic measurements, X-ray photoelectron spectroscopy (XPS), and wide angle X-ray scattering (WAXS). XPS analyses is a valuable tool for studying the chemical composition and the chemical state of elements at the surface of solids whereas WAXS provides information on the short range order. A model is proposed for the binding of the complex and its structure: the Co(III) ion is bonded with a pseudo-octahedral configuration. Captopril molecules are coordinated via mercapto group and amidic C=O group to Co(III) ions: two S atoms are bridging bonded between two Co(III) ions. The OH- ion completes the coordination around the Co(III).     

One-pot noninjection synthesis of Cu-doped Zn(x)Cd(1-x)S nanocrystals with emission color tunable over entire visible spectrum

Unlike Mn doped quantum dots (d-dots), the emission color of Cu dopant in Cu d-dots is dependent on the nature, size, and composition of host nanocrystals (NCs). The tunable Cu dopant emission has been achieved via tuning the particle size of host NCs in previous reports. In this paper, for the first time we doped Cu impurity in Zn(x)Cd(1-x)S alloyed NCs and tuned the dopant emission in the whole visible spectrum via variation of the stoichiometric ratio of Zn/Cd precursors in the host Zn(x)Cd(1-x)S alloyed NCs. A facile noninjection and low cost approach for the synthesis of Cu:Zn(x)Cd(1-x)S d-dots was reported. The optical properties and structure of the obtained Cu:Zn(x)Cd(1-x)S d-dots have been characterized by UV-vis spectroscopy, photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The influences of various experimental variables, including Zn/Cd ratio, reaction temperature, and Cu dopant concentration, on the optical properties of Cu dopant emission have been systematically investigated. The as-prepared Cu:Zn(x)Cd(1-x)S d-dots did show PL emission but with quite low quantum yield (QY) (typically below 6%). With the deposition of ZnS shell around the Cu:Zn(x)Cd(1-x)S core NCs, the PL QY increased substantially with a maximum value of 65%. More importantly, the high PL QY can be preserved when the initial oil-soluble d-dots were transferred into aqueous media via ligand replacement by mercaptoundeconic acid. In addition, these d-dots have thermal stability up to 250 °C.     

Photoelectron core levels for enargite,Cu3AsS4

The mineral chemistry of enargite surfaces and near‐surfaces prepared by fracture within an ultrahigh vacuum are investigated using XPS and synchrotron radiation XPS (SRXPS). The purpose of the study is to identify surface core‐level line positions in high‐resolution photoelectron spectra. The XPS spectra obtained using monochromatic Al Kα radiation show that there are near‐identical monosulphide line positions in S 2p spectra for the As–S and Cu–S bonds in enargite. The SRXPS spectra for sulphur are remarkably similar to the XPS spectra for sulphur, showing that there is minimal difference in the chemical environment between sulphur atoms at the surface and in the mineral matrix. The Cu 2p XPS data have only cuprous contributions and a minor surface contribution. The surface Cu contribution is observed as a high‐binding‐energy tail in the Cu 2p_3/2 spectrum. The As 3d data for both XPS and SRXPS show contributions from arsenic atoms at the surface and in the bulk mineral matrix. The surface contribution is distinct and is found 1 eV below the bulk contribution. The results of the study suggest that, following fracture, the enargite surface is reorganized in such a manner that the surface is characterized by protrusions of individual arsenic atoms. Copyright © 2004 John Wiley & Sons, Ltd.     

β-二酮双核铜(Ⅰ)配合物的合成与结构

室温下,通过双二苯基膦甲烷还原[Cu(tfac)     

Copper nanoclusters as peroxidase mimetics and their applications to H2O2 and glucose detection

Copper nanoclusters (Cu NCs) are found to possess intrinsic peroxidase-like activity for the first time. Similar to nature peroxidase, they can catalyze the oxidation of 3,3′,5,5′-tetramethylbenzidine by H₂O₂ to produce a nice blue color reaction. Compared with horseradish peroxidase, Cu NCs exhibits higher activity near neutral pH, which is beneficial for biological applications. The increase in absorbance caused by the Cu NCs catalytic reaction allows the detection of H₂O₂ in the range of 10 μM to 1 mM with a detection limit of 10 μM. A colorimetric method for glucose detection was also developed by combining the Cu NCs catalytic reaction and the enzymatic oxidation of glucose with glucose oxidase. Taking into account the advantages of ultra-small size, good stability, and high biocompatibility in aqueous solutions, Cu NCs are expected to have potential applications in biotechnology and clinical diagnosis as enzymatic mimics.     

双二苯基膦甲烷和μ^4-S的四核铜(Ⅰ)配合物的 合成与结构

室温下,双核配合物[Cu(dppm)(NO~3)]~2与二硫化碳反应制备了四核铜(Ⅰ)配合物[Cu~4(S)(dppm)~4](PF~6)~2·CH~2Cl~2(dppm=双二苯基膦甲烷),并经光谱学方法表征了配合物的物理化学性质。X射线四圆衍射测定结果表明dppm属桥式双齿配位,S^2^-以μ^4形式与中心铜离子配位,PF~6^-位于配合物的外界,铜离子呈现三角平面配位构型。     

Preparation of CdS nanocrystals within supramolecular self-assembled nanoreactors and their phase transfer behavior

A new strategy for the synthesis of CdS nanocrystals (NCs) within supramolecular self-assembly nanoreactors has been described. The self-assembly nanoreactors were readily constructed through the electrostatic interactions and ion pairs between palmitic acid and the terminal amine groups of hyperbranched polymer. In a chloroform/water two-phase system, aqueous Cd (2+) ions were spontaneously encapsulated into the cavities of self-assembly nanoreactors in chloroform. After reaction with S (2-) ions, the CdS NCs with high stability were obtained. By the addition of excess triethylamine, CdS NCs formed in the self-assembly nanoreactors were transferred from organic phase into aqueous phase. After dialysis and rotorary evaporation, aqueous CdS NCs could be redispersed into chloroform solution containing palmitic acid.     

Soluble precursors for CuInSe2, CuIn(1-x)Ga(x)Se2, and Cu2ZnSn(S,Se)4 based on colloidal nanocrystals and molecular metal chalcogenide surface ligands

We report a new platform for design of soluble precursors for CuInSe(2) (CIS), Cu(In(1-x)Ga(x))Se(2) (CIGS), and Cu(2)ZnSn(S,Se)(4) (CZTS) phases for thin-film potovoltaics. To form these complex phases, we used colloidal nanocrystals (NCs) with metal chalcogenide complexes (MCCs) as surface ligands. The MCC ligands both provided colloidal stability and represented essential components of target phase. To obtain soluble precursors for CuInSe(2), we used Cu(2-x)Se NCs capped with In(2)Se(4)(2-) MCC surface ligands or CuInSe(2) NCs capped with {In(2)Cu(2)Se(4)S(3)}(3-) MCCs. A mixture of Cu(2-x)Se and ZnS NCs, both capped with Sn(2)S(6)(4-) or Sn(2)Se(6)(4-) ligands was used for solution deposition of CZTS films. Upon thermal annealing, the inorganic ligands reacted with NC cores forming well-crystallized pure ternary and quaternary phases. Solution-processed CIS and CZTS films featured large grain size and high phase purity, confirming the prospects of this approach for practical applications.     

Hybrid Tungstocuprate [Cu(2,2'-bpy)3]2H4[CuW12O40]·6H2O Based on Keggin Polyoxoanion [CuW12O40]6-with CuⅡas Heteroatom

A novel hybrid tungstocuprate(Ⅱ) [Cu(2,2'-bpy)3]2H4[CuW12O40]·6H2O(2,2'-bpy=2,2'-bipyridine) was synthesized via hydrothermal method and characterized using elemental analyses, IR, UV, XPS, TG-DSC, EPR, and X-ray single crystal diffraction. The structural analysis shows that the complex consists of an unusual Keggin-type polyoxoanion [CuW12O40]6- and a pair of chiral complex cations [Cu(2,2'-bpy)3] together with four protons and six crystallization water molecules, and the Keggin polyoxoanion is connected with [Cu(2,2'-bpy)3] via multiple C-H…O hydrogen bonds resulting in a dimer.     

添加Cu2S对Bi-Pb-Sr-Ca-Cu-O体系超导性的影响

本文对Cu_2S添加的Bi-Pb-Sr-Ca-Cu-O体系进行了低温电阻、X射线衍射和XPS研究．实验结果表明，加入少量的Cu_2S能够降低高T_c相的形成温度，改善超导性能，加入Cu_2S引起了Cu 2p_(3/2)谱的主峰向低结合能方向移动，并减少其卫星峰的面积．这表明Cu_2S的加入减少了Cu~(2+)的量，即导致空穴载流子浓度的减小．     

Synthesis, structure and dioxygen reactivity of a bis(micro-iodo)dicopper(I) complex supported by the [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine ligand

The air-sensitive bis(micro-iodo)dicopper(I) complex 1 supported by [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine (L) has been prepared by treating copper(I) iodide with L in anhydrous THF. Compound 1 crystallizes as a dimer in space group C2/c. Each copper(I) center has distorted tetrahedral N2I2 coordination geometry with Cu-N(pyridyl) distances 2.061(3) and 2.063(3) A, Cu-I distances 2.6162(5) and 2.7817(5) and a Cu...Cu distance of 2.9086(8) A. Complex 1 is rapidly oxidized by dioxygen in CH2Cl2 with a 1 : 1 stoichiometry giving the bis(micro-iodo)peroxodicopper(II) complex [Cu(L)(micro-I)]2O2 (2). The reaction of 1 with dioxygen has been characterized by UV-vis, mass spectrometry, EPR and Cu K-edge X-ray absorption spectroscopy at low temperature (193 K) and above. The mass spectrometry and low temperature EPR measurements suggested an equilibrium between the bis(micro-iodo)peroxodicopper(II) complex 2 and its dimer, namely, the tetranuclear (peroxodicopper(II))2 complex [Cu(L)(micro-I)]4O4 (2'). Complex 2 undergoes an effective oxo-transfer reaction converting PPh3 into O=PPh3 under anaerobic conditions. At sufficiently high concentration of PPh3, the oxygen atom transfer from 2 to PPh3 was followed by the formation of [Cu(PPh3)3I]. The dioxygen reactivity of 1 was compared with that known for other halo(amine)copper(I) dimers.     

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.     

Tuning the excitonic and plasmonic properties of copper chalcogenide nanocrystals

The optical properties of stoichiometric copper chalcogenide nanocrystals (NCs) are characterized by strong interband transitions in the blue part of the spectral range and a weaker absorption onset up to ~1000 nm, with negligible absorption in the near-infrared (NIR). Oxygen exposure leads to a gradual transformation of stoichiometric copper chalcogenide NCs (namely, Cu(2-x)S and Cu(2-x)Se, x = 0) into their nonstoichiometric counterparts (Cu(2-x)S and Cu(2-x)Se, x > 0), entailing the appearance and evolution of an intense localized surface plasmon (LSP) band in the NIR. We also show that well-defined copper telluride NCs (Cu(2-x)Te, x > 0) display a NIR LSP, in analogy to nonstoichiometric copper sulfide and selenide NCs. The LSP band in copper chalcogenide NCs can be tuned by actively controlling their degree of copper deficiency via oxidation and reduction experiments. We show that this controlled LSP tuning affects the excitonic transitions in the NCs, resulting in photoluminescence (PL) quenching upon oxidation and PL recovery upon subsequent reduction. Time-resolved PL spectroscopy reveals a decrease in exciton lifetime correlated to the PL quenching upon LSP evolution. Finally, we report on the dynamics of LSPs in nonstoichiometric copper chalcogenide NCs. Through pump-probe experiments, we determined the time constants for carrier-phonon scattering involved in LSP cooling. Our results demonstrate that copper chalcogenide NCs offer the unique property of holding excitons and highly tunable LSPs on demand, and hence they are envisaged as a unique platform for the evaluation of exciton/LSP interactions.     

A novel layered oxysulfide intergrowth compound Sr4Mn2Cu5O4S5 containing a fragment of the alpha-Cu2S antifluorite structure

Sr4Mn2Cu5O4S5 contains manganese oxide sheets separated by unusual antifluorite-type Cu3S3 layers in which copper(I) ions are distributed over three- and four-coordinates sites in a similar fashion to in alpha-Cu2-xS and suggestive of high two-dimensional copper ion mobility.     

Synthesis, characterization and crystal structure of a tris(2-aminoethyl)amine copper complex with a imidazole coligand

Summary The complex [Cu(tren)ImH](ClO₄)₂ [tren = tris(2-aminoethyl) amine, ImH = imidazole] has been synthesized and characterized by elemental analyses, conductivity measurements, magnetic moments, and electronic, i.r., e.s.r. and XPS spectral studies. The X-ray crystal structure reveals that there are two kinds of cation [Cu(tren)(ImH)]²⁺ in the crystal, cations A and B, in a 21 ratio, respectively; so the stoichiometric formula is [Cu(tren)(ImH)]_1.5(ClO₄)₃. Cation B is disordered. The Cu^II ions in both cations A and B are in a trigonal bipyramidal geometry with the three primary amine groups of the tren ligand forming the equatorial plane, and the tertiary amine group and the imidazole ligand in apical positions.