电化学聚合漆酚钐配合物的研究

利用电化学方法合成的聚合漆酚 (EPU)与氯化钐的异丙醇溶液作用 ,得到聚合漆酚钐配合物 (EPU Sm3 + ) .采用红外光谱、紫外 可见光光谱、荧光光谱、XPS光电子能谱、动态机械热分析 (DMTA)以及差热 热重(DTA TG)等手段进行表征 ,确定其每个钐离子与EPU分子中三个链节单元的羟基发生配位 .原子发射光谱(AES)结果确定钐含量达 13 18% .配合物的电阻为 9 6× 10 1 0 Ω(EPU为 7 9× 10 1 0 Ω) .发现因配位作用而使配合物进一步交联 ,而难溶于有机溶剂 ,同时玻璃化转变温度和耐热性能得到提高     

电化学聚合漆酚铜配合物催化引发醋酸乙烯酯聚合的研究

将电化学聚合方法得到的聚合漆酚 (EPU)与氯化铜异丙醇溶液作用生成电化学聚合漆酚铜配合物(EPU Cu2 + ) .采用顺磁共振波谱 (ESR)、红外光谱 (FT IR)、XPS光电子能谱、原子发射光谱 (AES)、元素分析及AES等手段进行表征 ,确定该配合物的结构即每个铜离子与EPU分子中二个链节单元的羟基发生配位 .配合物中铜含量达 8 6 3% .实验表明 ,电化学聚合漆酚铜 (EPU Cu2 + )配合物膜在室温下的Na2 SO3水体系 (pH =7)中能催化引发醋酸乙烯酯 (VAc)按自由基加聚反应历程进行聚合 .讨论了温度、Na2 SO3浓度、VAc浓度和EPU Cu2 + 膜用量对聚合速率、诱导时间的影响 ,求得聚合速率的表达式Rp=0 0 7e- 2 82 5 RT[VAc]1 54[Na2 SO3]0 5,实验结果表明 ,EPU Cu2 + 配合物膜催化引发醋酸乙烯酯 (VAc)聚合的诱导期为 12 2s ,反应 2 4h后PVAc得率为79% , Mw =1 2 6× 10 6 , Mn=2 6 3× 10 5,多分散性系数为 4 79.     

电化学聚合漆酚钴膜配位结构与催化性能研究

电化学方法合成的聚合漆酚 (EPU)通过与氯化钴的异丙醇溶液作用 ,生成聚合漆酚钴配合物膜(EPU Co3+ ) .采用红外光谱、XPS光电子能谱、DTA TG、动态机械热分析 (DMTA)以及原子发射光谱 (AES)等手段进行表征 ,确定其配位结构 ,即每个钴离子与EPU中两个链节单元的羟基发生配位而交联 ,因此玻璃化转变温度和耐热性能均得到提高 .实验表明 ,此配合物膜在室温下的Na2 SO3水体系 (pH =7)中能催化引发VAc的聚合     

聚合漆酚-镍配合物的电化学合成与性质研究

探讨了漆酚 (EPU)的电化学聚合及其聚合漆酚 镍配合物 (EPU_Ni2 +)的制备 .采用X光电子能谱、红外光谱、动态机械热分析 (DMTA)、TG_DTA、原子发射光谱 (AES)等手段对配合物(EPU_Ni2 +进行表征 .AES结果表明 :镍含量达 7.5 % .由于存在着Ni2 +与EPU的配位作用 ,并引起进一步交联 ,从而提高了玻璃化转变温度和耐热性能     

电化学聚合漆酚铜配合物的结构及其催化性能

 将电化学聚合法得到的聚合漆酚（EPU）与氯化铜的异丙醇溶液作用制成了电化学聚合漆酚铜配合物（EPU－Cu2＋）,并用顺磁共振波谱、红外光谱、X射线光电子能谱、动态机械热分析和原子发射光谱等手段进行了表征．结果表明,该配合物中每个铜离子与EPU分子中二个链节单元的羟基发生配位,铜含量达8．63％．实验结果还表明,该配合物在Na2SO3的水体系（pH＝7）中能催化引发MMA按自由基反应历程进行聚合．     

电化学聚合漆酚钴膜引发甲基丙烯酸甲酯（MMA）聚合的研究

利用电化学技术合成的聚合漆酚（EPU）与氯化钴的异丙醇溶液反应,得到电化学聚合漆酚钴配合物膜,经XPS光电子能谱、红外光谱、TG－DTA、动态机械热分析（DMTA）以及原子发射光谱（AES）等手段进行表征并确定其结构。由于每个钴离子与EPU分子中两个链节单元的羟基发生配位引进进一步交联。因此玻璃化转变温度和耐热性能均得到提高。实验表明,在常温下的Na2SO3水体系（pH值为7）中配合物膜能引发甲基丙烯酸甲酯（MMA）聚合。     

电化学聚合漆酚铜酚配合物的结构及其催化性能

交塌化学聚合法得到的聚合漆酚（EPU）与氯化铜的异丙醇溶液作用制成了电化学聚合漆酚铜配合物（EPU－Cu^2 ）,并用顺磁共振波谱、红外光谱、X射线光电子能谱、动态机械热分析和原子发射光 等手段进行了表征,结果表明,该配合物中每个铜离子与EPU分子中二个链节单元了羟基发生配位,铜含量达8.63%,实验结果还表明,该配合物在Na2SO3的水体系（pH=70中能催化引发MMA按自由基反应历程进行聚合。     

电化学聚合漆酚-铕配合物的合成及性质

稀土金属具有特殊的理化性质,若能把稀土引入聚合物基质中,可望获得有着广泛应用前景的稀土-聚合物材料[1].漆酚是侧基为不饱和直链的邻苯二酚.根据其特点,利用电化学技术,可使其在不饱和侧链上发生氧化聚合生成聚合漆酚EPU膜[2].本文提出利用三异丙氧基铕与EPU膜作用,合成漆酚铕稀土金属配合物EPU-Eu(),国内外尚未见报道.提出了漆酚铕稀土金属配合物合成方法,并对其结构和部分性质进行表征.结果表明,EPU-Eu()电阻比EPU大,配合物中Eu()含量高达9.6%.由于Eu()与EPU存在配位作用,并引起进一步交联,因而难溶于绝大多数有机溶剂,玻璃化…     

电化学聚合漆酚稀土配合物的合成与表征

采用电化学方法合成的聚合漆酚(EPU)与三异丙氧基稀土Re(Pr,Nd,Eu)反应,生成稀土金属配合物(EPU-Re3+)。利用FT-IR、荧光光谱、XPS、DMTA、AES等手段对其表征,探讨其结构与性质。证明了配合物中存在着稀土金属离子Re3+与EPU的配位作用,并引起进一步的交联,因而难溶于绝大多数有机溶剂,而且其玻璃化转变温度和耐热性能均得到提高。     

铽（III）-噻吩甲酰三氟丙酮-电化学聚合漆酚配合物的研究

研究了铽（III）和噻吩甲酰三氟丙酮（HTTA）形成的配合物与电化学聚合方 法得到的聚合漆酚（EPU）发生配位反应及pH = 10.2时形成配合物Tb(III)-TTA- EPU的组分和结构。红外光谱、X光电子能谱的测试表明Tb~(3+)分别与EPU,TTA~- 发生配位。元素分析和电感偶合等离子体发射光谱（AES）测定结果证明了每个 Tb~(3+)分别与EPU分子中1个链节单元的羟基和3个TTA~-发生配位,从而得到配合 物的结构。动态机械热分析（DMTA）表明发生配位反应后该配合物进一步交联,从 而难溶于大部分有机溶剂,其玻璃化转变温度和耐热性能均得到很大提高。我们对 其荧光性质进行了研究,发现常温下配合物在紫外光下发生强的荧光,主要是Tb~ (3+)离子的~5D_4→~7F_5的跃迁。讨论了溶剂、pH值对配合物荧光强度的影响。当 pH = 10.2时,合成的配合物有最好的荧光性质。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。