Production of certified reference materials for mycotoxins: IRMM’s view on the assessment of uncertainties

Analytical difficulty and the economic importance of controlling mycotoxin levels in food and feed led the Community Bureau of Reference (BCR) to prepare a series of certified reference materials (CRM) for various mycotoxins. Because of the wide acceptance of these CRM and the need to ensure the comparability and traceability of measurements in the future it is necessary to prepare and certify new batches of mycotoxin reference materials (RM). In the following text two different approaches for evaluation of the characterisation uncertainty of CRM will be compared using the certification of aflatoxin M₁ (AfM₁) in milk powder as an example. The conventional approach is based on evaluation of characterisation exercise data; the alternative approach is based on measurement uncertainties of the employed analytical methods. Because laboratories are using totally different approaches to estimate the measurement uncertainties, combination of the uncertainties obtained from the participating laboratories was not recommended. Therefore, a new integrated approach for assessment of the measurement uncertainties of the analytical methods on the basis of additional data collected during the characterisation exercise will be described. The conventional approach was found to be the most appropriate and economical approach to evaluate the characterisation uncertainty as a characterisation exercise must be performed anyway to establish the property values of candidate (C)RM, irrespective of whether or not reliable measurement uncertainties can be provided by the laboratories. An integrated approach for assessment of measurement uncertainties based on additional characterisation data as applied here to enable use of an uncertainty-based approach provides more information but is too time-consuming and cost-intensive to become common practice.     

Development of a certified reference material for cachaça: an effective material for quality assurance

Cachaça is the typical and genuine denomination for the sugar cane beverage produced in Brazil. It has an alcoholic content between 38 and 48 % by volume, at 20 °C, and is obtained from the distillation of fermented sugar cane juice with the possible addition of up to 6 g/L of sugar, expressed by sucrose. This paper aims to outline the approach taken for the certification of the mass fraction of individual alcohols and their associated uncertainties in a cachaça certified reference material (CRM) produced by the Organic Analysis Laboratory of the Chemical Metrology Division of Inmetro. The requirements of ISO Guide 31, ISO Guide 34 and ISO Guide 35 were followed for the certification. This included the assessment of the degree of homogeneity of the material, the short-term stability study to determine the transport conditions, the long-term stability study to establish the shelf life and storage conditions of the CRM and the characterization process. The certified values were determined by two analytical techniques: gas chromatography coupled to mass spectrometry and gas chromatography with flame ionization detection. In order to support the routine testing of cachaça, in helping analytical laboratories validate and standardize their methods, the certified reference material (CRM 02.1/10.003b) was developed and certified for the mass fractions of methanol (9.18 mg/100 g ± 0.82 mg/100 g), 2-butanol (4.15 mg/100 g ± 0.40 mg/100 g), 1-butanol (1.30 mg/100 g ± 0.18 mg/100 g), isobutanol (24.0 mg/100 g ± 1.0 mg/100 g) and 1-propanol (29.4 mg/100 g ± 1.3 mg/100 g) in a spiked cachaça.     

Assessment of commutability for candidate certified reference material ERM-BB130 “chloramphenicol in pork”

Chloramphenicol (CAP), an effective antibiotic against many microorganisms, is meanwhile banned in the EU for treatment of food-producing animals due to adverse health effects. The Institute for Reference Materials and Measurements (IRMM) is currently developing a certified reference material (CRM) for CAP in pork, intended for validation and method performance verifications of analytical methods. The material will be certified using liquid chromatography–tandem mass spectrometry (LC–MS/MS) and gas chromatography–mass spectrometry (GC–MS) methods and has a target CAP level around the minimum required performance limit (MRPL) of 0.3 μg/kg. To prove that the material can be applied as a quality control tool for screening methods, a commutability study was conducted, involving five commercially available enzyme-linked immunosorbent assay kits and one biosensor assay (BiaCore kit). Meat homogenates (cryo-milled wet tissue) with CAP concentrations around the MRPL and the candidate CRM (lyophilised powder) were measured by LC–MS/MS and GC–MS as well as the six screening methods. Pairwise method comparisons of results obtained for the two sample types showed that the CRM can successfully be applied as quality control (QC) sample to all six screening methods. The study suggests that ERM-BB130 is sufficiently commutable with the investigated assays and that laboratories applying one of the investigated kits therefore benefit from using ERM-BB130 to demonstrate the correctness of their results. However, differences among the assays were observed, either in the abundance of bias between screening and confirmatory LC and GC methods, the repeatability of test results, or goodness of fit between the methods.     

Instability of the DNPH-formaldehyde derivative in the certified reference material BCR-551 stored at −70 °C but not at −20 °C

During the post-certification stability monitoring of the certified reference material (CRM) BCR-551 (DNPH derivatives dissolved in acetonitrile), a decreased concentration of one of the analytes of this CRM, the DNPH-formaldehyde derivative, was detected in reference samples (stored at ?70 °C), while the concentration of normal “on-sale” samples (stored at ?20 °C) remained stable. This behaviour is contrary to the expectation of better stability at lower temperatures. Apparently, the DNPH-formaldehyde derivative reacts with dinitrophenylhydrazine (DNPH) remaining from the synthesis phase to produce two new substances. These substances have been identified as C₁₃H₁₂N₈O₈ (substance 1) and C₂₀H₁₆N₁₂O₁₂ (substance 2) which, based on their structure, are suggested to be produced consecutively: DNPH + DNPH-formaldehyde derivative → substance 1 and substance 1 + DNPH-formaldehyde derivative → substance 2. Since acetonitrile freezes at ?45 °C, reference samples are frozen at ?70 °C, while normal samples are still liquid at ?20 °C. We believe that this leads to a cryo-concentration of the solutes above the eutectic point and thus to an increased reaction rate in the reference samples. This case demonstrates that care should be taken when extrapolating stability results towards conditions that never have been tested, especially if phase transitions are involved, even at temperature as low as ?70 °C. Furthermore, a slower degradation rate at lower temperatures can be overcompensated by a higher concentration due to cryo-concentration above the eutectic temperature.     

Harmonized protocol and certified reference material for the determination of extractable contents of phosphorus in freshwater sediments – A synthesis of recent works

An analytical protocol for the determination of the extractable phosphorus contents in freshwater sediments has been harmonized through interlaboratory studies in the frame of the Standards Measurements and Testing Program of the European Commission. A homogeneous and stable sediment reference material has been prepared and certified on the basis of this protocol named SMT protocol, and will be available in spring of 2001. The SMT protocol, together with the reference material, are useful tools in the field of water management, especially at a time when quality assurance and data comparability are of paramount importance in laboratory analysis. The knowledge of the bioavailable forms of phosphorus is important not only for sediments but also for sludge and soils. Therefore, the SMT protocol could be extended to these materials and new CRMs could be prepared. The SMT protocol was used in a study of a reservoir, which allowed to calculate the P stock, therefore helping to predict the restoration delay of the lake. The paper describes the protocol and the CRM, and gives a brief outline of the case study. Received: 14 November 2000 / Revised: 25 January 2001 / Accepted: 31 January 2001     

What’s CUR≟

The chapter of the student affiliates of the American Chemical Society at the University of Tennessee at Martin has won three commendable and eighteen consecutive outstanding ratings, the most consecutive ratings of any student affiliate chapter, from the Society Committee on Education of the American Chemical Society. The activities of the chapter involve a great deal of pedagogic or literal chemistry, that is the members learn and communicate several aspects of chemistry from the chapter programs. In addition, a special chemistry or camaraderie results when members prepare for and participate in the various club projects and activities. This article briefly describes specific activities of UTM student affiliates that help to develop both the literal and the special chemistry among members. Finally, The High School Science Bowl, which is a most electrifying and rejuvenating activity, is described in greater detail for the information of other chemistry clubs.     

Basal Cell Carcinoma: What’s New Under the Sun

Basal cell carcinoma (BCC) is the most common skin cancer in white populations with an increasing incidence worldwide, thereby imposing an important public health problem. Its etiology is still unclear, but existing data indicate that the risk for BCC development is of multifactorial origin and results from the interplay of both constitutional and environmental factors. Yet, UV radiation (UVR) is believed to be the predominant causative risk factor in the pathogenesis of BCC. For years, BCC and squamous cell carcinoma (SCC) have been grouped together as “nonmelanoma skin cancer.” However, it seems that there are considerable biologic differences between BCC and SCC, and thus each type of epithelial cancer should be addressed separately. The present review provides an overview of the intriguing etiologic link of BCC with UVR and attempts a comprehensive review of recent epidemiologic and molecular evidence that supports this association.     

The role of certified reference materials in ensuring the quality of spectrochemical measurements – the present status in Romania

 The objective of quality assurance programme for spectrochemical measurements is to reduce the measurement errors to accepted limits. Reference materials are being widely used as measurement standards in the fields of industrial production, environmental protection and clinical chemistry, and are playing an important role in ensuring the quality of measurement results. This paper presents some aspects, practices and examples of the activity of the Reference Materials Laboratory of the National Institute of Metrology, Bucharest, in the field of spectrochemical measurements. An attempt to describe the role and use of reliable certified reference materials to ensure the quality of spectrochemical measurements is presented. A short review of the locally available certified reference materials used in spectrochemical measurements is given. The use of reference materials data in estimating the measurement uncertainty is discussed. An interlaboratory comparison, recently organized in Romania, is also presented as a useful response to the need for quality assurance of spectrochemical results. Received: 20 March 1999 / Accepted: 25 February 2000     

The combination of ionic surfactants with polyelectrolytes-a new material for membranes?

The combination of two oppositely charged polyelectrolytes results in polyelectrolyte complexes. The simultaneous interfacial reaction between the different polyions leads to formation of polyelectrolyte complex membranes. Some of these have a very good performance in the membrane process pervaporation, especially for dehydration of organic liquids. The combination of a polyelectrolyte with an ionic surfactant of opposite charge results like-wise membranes but with other separation properties. The differences between the two types of membranes, formed from cellulosesulfate in combination with cationic polyelectrolytes or cationic surfactants, will be discussed.     

Evaluation of results derived from the analysis of certified reference materials – a user-friendly approach based on simplicity

Certified reference materials (CRMs) have now been in regular use for several decades. Their production and certification are regulated by international standards. But, even today there are no agreements on procedures for evaluating results obtained by the users. As a consequence, the way CRM results are treated in the literature leaves a lot to be desired. A statistical evaluation is rarely, if ever, described in published reports. The most common approach is to compare the found mean and/or range with the certified range and then state if the mean falls within the certified range, or if the two ranges overlap. If this happens, the analyst is usually satisfied. In addition, usually no regard is paid to the fact that the certified interval is based on a 95% confidence interval (CI) and the found interval on standard deviation and that this evaluation has little, if any, statistical relevance. Long-term evaluation of a CRM often consists in nothing more than producing a control chart, which relates the found results to the certified mean and CI. This paper is an attempt to improve the situation by providing a set of easy-to-use guidelines for evaluating results from CRMs. During the process we have identified different areas in which there is a need for such guidelines: 1.?short-term evaluation of a single, or multiple, determination at one or several specific times; 2.?identification of systematic and random errors; 3.?evaluation of CRMs when used in a collaborative trial of a method; and 4.?long-term evaluation for monitoring an analytical process over extended periods of time. It is important that the guidelines do not require expert competence in statistics from the analyst. Such obstacles would probably render most guidelines unused.     

The prospect of the dalton in the new SI: an educator’s point of view

If the definitions of the kilogram and the mole, based on exact values of the Planck and Avogadro constants, respectively, are accepted within the framework of the new SI, then the current definition of the dalton cannot be retained. Acceptance implies redefinition of the dalton exactly in terms of the kilogram. The redefined, exact dalton is useless in mass spectrometry, and hence, a new quantity for the carbon-12 reference mass would have to be established—against the principle of Ockham’s razor. In order to remove the roots of this awkward concept, the kilogram based on the Planck constant, and the mole, consisting of a particular number of entities equal to the inexactly determined numerical value of gram-to-dalton mass ratio, should be included in the new SI system. Some controversies related to the concept of mole have been also briefly outlined.     

Reaction of levoglucosenone with Dane’s diene

Cycloaddition of levoglucosenone to 7-methoxy-4-vinyl-1,2-dihydronaphthalene has been studied under different conditions, including heating under atmospheric pressure, in a sealed ampule, and under high pressure, as well as under microwave irradiation and in the presence of various catalysts. The chiral Diels–Alder adduct thus obtained can be used in the synthesis of estrone and its analogs.     

What do I miss in today’s electrochemistry?

Journal of Solid State Electrochemistry -     

Comparison of the boundary theory with the contact rule of phase regions and Gupta’s method

1Introduction J.W.Gibbs’phase equilibrium theory,especially the phase rule,laid the foundation for the phase theory,but the phase rule cannot solve the problems regarding the relation between neighboring phase regions(ab-breviated to NPRs)and their bound…     

Research on the factors affecting the innovation performance of China’s new energy type enterprises from the perspective of industrial policy

Journal of Thermal Analysis and Calorimetry - With the development of intelligent technology and the rapid growth of economic income of new energy enterprises in China, the research on the...     

Synthesis of new chiral keto alcohols by baker’s yeast

Fourteen chiral α- and β-keto alcohols 2a–2r were synthesized by the asymmetric reduction of their corresponding diketones 1a–1r via baker’s yeast. In addition, ten corresponding racemic α-keto alcohols were synthesized by the benzoin condensation of their corresponding aldehydes, which were used for the determination of the ee values through their chiral resolution on chiral HPLC. Amongst the 15 diketones, 1j and chiral α-keto alcohols 2i, 2j and chiral β-keto alcohol 2r are novel compounds. Six keto alcohols 2b, 2c, 2d, 2f, 2h and 2p were synthesized by baker’s yeast for the first time. There are some studies in the literature where baker’s yeast was applied to the diketones 1a, 1g, 1e, 1k and 1n under various conditions different to those reported herein. The yields and the ee values of these studies were not as high as ours. All of the keto alcohols synthesized were characterized by IR, NMR (¹H and ¹³C), and MS. The relationship between the structure of the diketone and the yield, diastereoselectivity and enantiomeric excess is also discussed.