Determination of polychlorinated dibenzo-p-dioxin and dibenzofuran congeners in air particulate and marine sediment standard reference materials (SRMs)

Due to the limited number of environmental matrix certified reference materials (CRMs) with assigned values for natural levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), an interlaboratory study was undertaken by the National Institute of Standards and Technology (NIST) and Environment Canada to establish reference concentration values for selected PCDD/Fs in two well-characterized NIST Standard Reference Materials (SRMs): SRM 1649a (Urban Dust) and SRM 1944 (New York/New Jersey Waterway Sediment). Results from 14 laboratories were used to provide reference values for the seventeen 2, 3, 7, 8-substituted PCDD/F congeners, the totals for individual tetra- through hepta-substituted PCDD/F homologues, and the total amount of tetra- through hepta-substituted PCDD/Fs. The mass fractions for the individual 2, 3, 7, 8-substituted congeners range from approximately 0.01 microg/kg to 7 microg/kg dry mass.     

Preparation and certification of a biological reference material (CARP-1) for polychlorinated dibenzo-p-dioxin and dibenzofuran congeners

A biological certified reference material for nine 2,3,7,8-chlorine substituted dibenzo-p-dioxin and dibenzofuran congeners and nine common polychlorinated biphenyl congeners is available for the first time. This material (CARP-1) is in the form of a slurry comprising approximately 9 g of carp homogenate sealed in a glass ampoule. The only foreign materials in the slurry are an antioxidant added to prevent rancidity and water to facilitate homogenization and ampouling. CARP-1 was found to be homogeneous and stable with respect to its organochlorine concentrations under room as well as elevated temperature storage conditions. The minimum projected shelf life for this material is 5 years.     

Determination of selected oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) in diesel and air particulate matter standard reference materials (SRMs)

Oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) have recently received much attention in discussions regarding the negative impacts of particulate matter (PM) on human health and the environment. The National Institute of Standards and Technology provides several environmental matrix standard reference materials (SRMs) with certified and reference values for polycyclic aromatic hydrocarbons (PAHs) and nitrated PAHs. In this study, the concentrations of oxygenated PAHs are determined in three air PM SRMs (1649b, 1648a, and 2786) and three diesel PM SRMs (1650b, 2975, and 1975) using two independent gas chromatography–mass spectrometry methods. Concentrations of oxy-PAHs were at the milligrams per kilogram level with higher overall concentrations in diesel PM (up to 50 mg/kg for 9,10-anthraquinone). One of the highest oxy-PAH concentrations (up to 5 mg/kg) measured in the air particulate SRMs was for 7,12-benz[a]anthracenquinone. These results suggest that oxygenated PAHs should not be neglected in the analysis of PM as their concentrations can be as high as those of some PAHs and are one to two orders of magnitude higher than those for nitro-PAHs.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Determination of congeners of polychlorinated biphenyls in reference materials

Aroclor reference materials from the United States Environmental Protection Agency repository are proposed for use as secondary standards for the congener-specific analysis of polychlorinated biphenyls in environmental samples. Representative samples of the materials have been analyzed using a gas chromatograph equipped with photo-ionization and electron capture detectors. The elution pattern of the congeners was determined for a DB-17 capillary column.     

Polybrominated diphenyl ether congeners and toxaphene in selected marine standard reference materials

Polybrominated diphenyl ether (PBDE) congeners and components of the complex mixture toxaphene are stable in the environment and readily bioaccumulated into wildlife and human tissues. PBDEs are presently used in large quantities worldwide as flame retardants in textiles, furniture, computer equipment, and cables. Toxaphene is a complex mixture of chlorinated bornanes and bornenes that was the most heavily used pesticide in the United States until it was banned in 1982; however, some countries continue to use toxaphene. The National Institute of Standards and Technology has quantified PBDE congeners and toxaphene in several available Standard Reference Materials (SRMs) using methods of gas chromatography with electron impact mass spectrometry (GC-EI-MS) and GC negative chemical ionization (NCI) MS, respectively. SRM 1588a Organics in Cod Liver Oil and SRM 1945 Organics in Whale Blubber were examined for PBDE congeners 47, 99, 100, 153, and 154, total toxaphene, and toxaphene congeners 26, 50, and 62. SRM 1946 Lake Superior Fish Tissue was also examined for total toxaphene and toxaphene congeners. The sum of the PBDE congeners (mean, (1 SD) wet basis) for SRM 1945 was 150 ng g^–1 (7 ng g^–1). The concentration of PBDE 47 in SRM 1588a was 82.7 ng g^–1 (2.8 ng g^–1). Other PBDEs were detected in SRM 1588a but were not quantified due their low levels. The total toxaphene (wet mass basis) was 1,210 ng g^–1 (127 ng g^–1), 1,960 ng g^–1 (133 ng g^–1), and 3,980 ng g^–1 (248 ng g^–1) in SRMs 1945, 1946, and 1588a, respectively. The values for PBDEs and toxaphene determined in the SRMs, while not certified, indicate that the SRMs will be suitable control materials for PBDE and toxaphene analyses.     

Determination of polychlorinated biphenyl congeners and chlorinated pesticides in a fish tissue standard reference material

The concentrations of a wide range of polychlorinated biphenyl congeners (PCBs) and chlorinated pesticides in a fish tissue Standard Reference Material (SRM) have been determined using multiple methods of analysis. This material, SRM 1946, Lake Superior Fish Tissue, was recently issued by the National Institute of Standards and Technology (NIST) and complements a suite of marine environmental natural-matrix SRMs that are currently available from NIST for the determination of organic contaminants such as aliphatic hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), PCBs, and chlorinated pesticides. SRM 1946 is a fresh tissue homogenate (frozen) prepared from filleted adult lake trout (Salvelinus namaycush namaycush) collected from the Apostle Islands region of Lake Superior. SRM 1946 has certified and reference concentrations for PCB congeners, including the three non- ortho PCB congeners, and chlorinated pesticides. Certified concentrations are available for 30 PCB congeners and 15 chlorinated pesticides. Reference concentrations are available for 12 PCB congeners and 2 chlorinated pesticides. In addition, SRM 1946 is characterized for additional chemical constituents and properties: fatty acids, extractable fat, methylmercury, total mercury, selected trace elements, proximates, and caloric content. The characterization of chlorinated compounds is described in this paper with an emphasis on the approach used for the certification of the concentrations of PCB congeners and chlorinated pesticides. The PCB congener and chlorinated pesticide data are also compared to concentrations in other marine natural-matrix reference materials available from NIST (fish oil, mussel tissue, whale blubber, and a second fresh frozen fish tissue homogenate prepared from filleted adult lake trout collected from Lake Michigan) and from other organizations such as the National Research Council Canada (ground whole carp), the International Atomic Energy Agency (fish homogenate), and the European Commission Joint Research Centre [fish oils (cod and mackerel) and mussel tissue].     

Preparation and certification of a biological reference material (CARP-1) for polychlorinated dibenzo-p-dioxin and dibenzofuran congeners

A biological certified reference material for nine 2,3,7,8-chlorine substituted dibenzo-p-dioxin and dibenzofuran congeners and nine common polychlorinated biphenyl congeners is available for the first time. This material (CARP-1) is in the form of a slurry comprising approximately 9 g of carp homogenate sealed in a glass ampoule. The only foreign materials in the slurry are an antioxidant added to prevent rancidity and water to facilitate homogenization and ampouling. CARP-1 was found to be homogeneous and stable with respect to its organochlorine concentrations under room as well as elevated temperature storage conditions. The minimum projected shelf life for this material is 5 years.     

Determination of polychlorinated dibenzofuran (PCDF) and dibenzo-p-dioxin (PCDD) levels and isomer patterns in fish, crustacea, mussel and sediment samples from a fjord region polluted by Mg-production

Summary Isomer-specific determination of polychlorinated dibenzofurans (PCDF) and dibenzo-p-dioxins (PCDD) was carried out in 37 samples of different fish species, crustaea and mussel from a fjord area contaminated by waste water from a Mg-factory. In addition 6 sediment samples were analysed. The tetra- and pentachlorodibenzofuran isomer pattern of the Mg-process is very characteristic and dominated by isomers with chlorine in the positions 1,2,3,7 and/or 8. Very similar patterns were found in sediment, crustacea and mussel samples up to 15 km from the factory. Nearly all isomers were present in crab, shrimp and mussel while fish samples contained mainly 2,3,7,8-substituted congeners. The isomer distributions and concentration levels for different species and tissues with high and low fat content are presented. The applied analysis techniques and the quality assurance procedure as well as practical problems are described in detail. The found levels varied between low ppt- and high ppb-levels for single isomers.

---

Bestimmung von polychlorierten Dibenzofuranen (PCDF) und Dibenzo-p-dioxinen (PCDD) und deren Isomerenverteilung in Fisch, Crustaceen, Muscheln und Sedimenten einer durch Mg-Produktion verunreinigten Fjordregion

     

Three new mussel tissue standard reference materials (SRMs) for the determination of organic contaminants

Three new mussel tissue standard reference materials (SRMs) have been developed by the National Institute of Standards and Technology (NIST) for the determination of the concentrations of organic contaminants. The most recently prepared material, SRM 1974b, is a fresh frozen tissue homogenate prepared from mussels (Mytilus edulis) collected in Boston Harbor, Massachusetts. The other two materials, SRMs 2977 and 2978, are freeze-dried tissue homogenates prepared from mussels collected in Guanabara Bay, Brazil and Raritan Bay, New Jersey, respectively. All three new mussel tissue SRMs complement the current suite of marine natural-matrix SRMs available from NIST that are characterized for a wide range of contaminants (organic and inorganic). SRM 1974b has been developed to replace its predecessor SRM 1974a, Organics in Mussel Tissue, for which the supply is depleted. Similarly, SRMs 2977 and 2978 were developed to replace a previously available (supply depleted) freeze-dried version of SRM 1974a, SRM 2974, Organics in Freeze-Dried Mussel Tissue. SRM 1974b is the third in a series of fresh frozen mussel tissue homogenate SRMs prepared from mussels collected in Boston Harbor starting in 1988. SRM 1974b has certified concentration values for 22 polycyclic aromatic hydrocarbons (PAHs), 31 polychlorinated biphenyl congeners (PCBs), and 7 chlorinated pesticides. Reference values are provided for additional constituents: 16 PAHs, 8 PCBs plus total PCBs, 6 pesticides, total extractable organics, methylmercury, and 11 trace elements. PAH concentrations range from about 2 ng g^–1 dry mass (cyclopenta[cd]pyrene) to 180 ng g^–1 dry mass (pyrene). PCB concentrations range from about 2 ng g^–1 dry mass (PCB 157) to 120 ng g^–1 dry mass (PCB 153). The reference value for total PCBs in SRM 1974b is (2020 ± 420) ng g^–1 dry mass. Pesticide concentrations range from about 4 ng g^–1 dry mass (4,4-DDT) to 40 ng g^–1 dry mass (4,4-DDE). SRM 2977 has certified values for 14 PAHs, 25 PCB congeners, 7 pesticides, 6 trace elements, and methylmercury. Reference values for 16 additional PAHs and 9 inorganic constituents are provided, and information values are given for 23 additional trace elements. SRM 2978 has certified and reference concentrations for 41 and 22 organic compounds, respectively, and contains contaminant levels similar to those of SRM 1974b. Organic contaminant levels in SRM 2977 (mussels from Guanabara Bay, Brazil) are typically a factor of 2 to 4 lower than those in SRM 1974b and SRM 2978. The organic contaminant concentrations in each new mussel tissue SRM are presented and compared in this paper. In addition, a chronological review of contaminant concentrations associated with mussels collected in Boston Harbor is discussed as well as a stability assessment of SRM 1974a.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Separation of 26 toxaphene congeners and measurement in air particulate matter SRMs compared to technical toxaphene SRM 3067

Toxaphene is a complex technical mixture that has been found ubiquitously in the environment but has caused issues for analysis, especially of individual congeners. This paper reports the elution order of 26 major toxaphene congeners on three gas chromatographic columns. The three different stationary phases generally had similar elution orders for the toxaphene congeners, but fewer co-elutions occurred on a low-bleed, low-polarity column. These congeners (except for two that co-eluted and were not added to the calibration mixture) were examined in air particulate matter standard reference materials (SRMs), 1648a, 1649a, and 1649b as well as SRM 3067 toxaphene in methanol for assignment of reference values. SRM 3067 had mass fractions an order of magnitude greater than the air particulate SRMs, which ranged from 0.568 ± 0.018 ng g⁻¹ dry mass (B9-2006 in SRM 1648a) to 12.9 ± 0.20 ng g⁻¹ dry mass (B9-715 (P 58) in SRM 1649a). The three air particulate SRMs all had different mass fractions and proportions of congeners relative to the sum of the toxaphene congeners. SRM 3067 may be useful as a technical mixture toxaphene congener calibrant. SRMs 1648a and 1649b will serve as reference materials for the analysis of 21 (three congeners were not included due to values below the detection limit or a potential polychlorinated biphenyl co-elution) toxaphene congeners in atmospheric particulate samples.     

Certification of standard reference material (SRM) 1941a, organics in marine sediment

SRM 1941a, Organics in Marine Sediment, has been recently issued with certified concentrations for 23 polycyclic aromatic hydrocarbons, 21 polychlorinated biphenyl congeners, 6 chlorinated pesticides, and sulfur. Noncertified concentrations have been also reported for additional PAHs, PCB congeners, and chlorinated pesticides and for percent total organic carbon (TOC), aliphatic hydrocarbons, and trace elements. SRM 1941a is the most extensively characterized natural matrix SRM issued by the National Institute of Standards and Technology (NIST).     

Standard reference materials (SRMs) for determination of organic contaminants in environmental samples

For the past 25 years the National Institute of Standards and Technology (NIST) has developed certified reference materials (CRMs), known as standard reference materials (SRMs), for determination of organic contaminants in environmental matrices. Assignment of certified concentrations has usually been based on combining results from two or more independent analytical methods. The first-generation environmental-matrix SRMs were issued with certified concentrations for a limited number (5 to 10) of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Improvements in the analytical certification approach significantly expanded the number and classes of contaminants determined. Environmental-matrix SRMs currently available include air and diesel particulate matter, coal tar, marine and river sediment, mussel tissue, fish oil and tissue, and human serum, with concentrations typically assigned for 50 to 90 organic contaminants, for example PAHs, nitro-substituted PAHs, PCBs, chlorinated pesticides, and polybrominated diphenyl ethers (PBDEs). Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Polychlorinated naphthalene concentrations and profiles in cheese and butter,and comparisons with polychlorinated dibenzo-p-dioxin,polychlorinated dibenzofuran and polychlorinated biphenyl concentrations

Polychlorinated naphthalenes (PCNs) are candidates for inclusion in the Stockholm Convention on persistent organic pollutants. PCNs are structurally and toxicologically similar to 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) and its analogues. Intake in food is considered to be an important human exposure pathway for PCNs. In this preliminary study, cheese and butter samples were analysed for PCNs, polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) using an isotope dilution gas chromatography high-resolution mass spectrometry method. The aim of this study was to evaluate the PCN concentrations in the cheese and butter samples and to compare them with the PCDD, PCDF and PCB concentrations. The PCN concentrations were 5.6–103 pg g^?1 of wet weight in the seven cheese samples tested and 5.0–199 pg g^?1 of wet weight in the seven butter samples tested. The mass concentrations of lower chlorinated congeners were greater than those of the higher chlorinated congeners. Congeners of CN45/36, CN27/30 and CN33/34/37 were much more abundant than other congeners found in tetrachlorinated PCNs. Congeners of CN51, CN66/67 and CN73 were determined to be the predominant congeners in penta-, hexa- and heptachlorinated homologs, respectively. The PCNs contributed around 5% of the total PCN, PCDD, PCDF and PCB toxic equivalence (TEQ) values. CN73 was found to be the dominant PCN congener and contributed more than 40% to the PCN TEQ value. Congeners CN66/67, CN69 and CN63 were also found at relatively high levels. The PCB congener CB118 was the predominant congener (by mass-based concentration) of the 12 dioxin-like PCBs (dl-PCBs). The PCBs contributed 53.8% of the total TEQ, and congener CB126 contributed more than any other compound that was analysed to the total TEQ. The PCDDs and PCDFs contributed 11.6% and 29.7% of the total TEQ values, respectively.     

Microheterogeneity evaluation of polycyclic aromatic hydrocarbons in particulate standard reference materials

With the emergence of highly sensitive analytical techniques, the microanalysis of natural-matrix materials employing smaller sample sizes is increasingly more common, which subsequently warrants a homogeneity assessment for the individual components at the appropriate sampling level. Pressurized liquid extraction (PLE) in combination with gas chromatography/mass spectrometry (GC/MS) has been used to determine the sampling constants and evaluate the relative homogeneity of trace levels of polycyclic aromatic hydrocarbons (PAHs) for two previously certified particulate standard reference materials, SRM 1649a Urban Dust and SRM 1650b Diesel Particulate Matter, in the milligram sampling range. Fluoranthene, pyrene, benz[a]anthracene and benzo[e]pyrene within SRM 1650b Diesel Particulate Matter were deemed to be homogeneous, based on relatively small sampling constants (K _S<100 mg), whereas the larger sampling constants (K _S>100 mg) obtained for all PAHs in SRM 1649a Urban Dust suggest more material heterogeneity. The material heterogeneity of ten individual PAHs (phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, benzo[k]fluoranthene, benzo[e]pyrene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was also described via nonlinear relationships (i.e., power law) between subsampling error S _s (%) and sample mass, which are used to predict analyte-specific minimum sample masses that result in a specific level of analytical uncertainty. Electronic supplementary material Supplementary material is available for this article at and is accessible for authorized users.     

Determination of some additional trace elements in certified standard reference materials (soils, sludges, sediment) by ICP-emission spectrometry

Summary The concentration of some additional elements like Ag, Au, B, Ba, Be, Co, Li, Mo, Na, P, Pt, and S in some standard reference materials (SRM's) were determined by using high resolution ICP (Inductively Coupled Plasma)-emission spectrometry. The materials used were three soils and three sludges from the BCR (Community Bureau of Reference, European Communities) and one sediment from NBS (National Bureau of Standards, USA). The aqua regia soluble and the total content using HF-treatment were shown. The given results are the mean values of 6 independent measurements for each material and for each decomposition method (certification conditions). The quantitative determination of Au and Pt was not possible due to severe spectroscopic interferences, which could not be eliminated. Beside the concentration values also the measured detection limits and the limits of determination for each element in the matrices under investigation are given. For comparison and for testing the validity of the decomposition procedures, also certified elements like Cd, Cu, Ni and Zn have been analysed in all the samples.

---

Bestimmung einiger zusätzlicher Spurenelemente in zertifizierten Referenzmaterialien (Boden, Schlamm, Sediment) durch ICP-Emissions-Spektrometrie

     

Determination of mercury in environmental standard reference materials by pyrolysis

A cold-vapour method is described for the determination of mercury in reference materials by pyrolysis and a two-stage amalgamation on gold. Interfering pyrolysis products are eliminated by a combination of a catalytic converter and two absorbers for organic substances. The sensitivity of the method is 5 ppb for a 20-mg sample. The reproducibility depends on the homogeneity of the materials.     

Determination of organic acids in Vaccinium berry standard reference materials

Nine organic acids (citric acid, galacturonic acid, glycolic acid, isocitric acid, malic acid, oxalic acid, quinic acid, shikimic acid, and tartaric acid) and two anions (phosphate and sulfate) were determined in a suite of Vaccinium berry-containing dietary supplement standard reference materials (SRMs). Following solvent extraction, three independent methods were utilized in the quantification of these compounds. The first method involved reversed-phase liquid chromatography with ultraviolet absorbance detection at 210 nm and isotope dilution mass spectrometry. The second method utilized ion chromatography with conductivity detection. Finally, gas chromatography with isotope dilution mass spectrometry detection was used following derivatization with N-methyl-N-trifluoroacetamide (MSTFA). The combined data from these methods was used for the assignment of organic acid levels in the seven candidate SRMs.     

Determination of polybrominated diphenyl ethers in environmental standard reference materials

Standard reference materials (SRMs) are valuable tools in developing and validating analytical methods to improve quality assurance standards. The National Institute of Standards and Technology (NIST) has a long history of providing environmental SRMs with certified concentrations of organic and inorganic contaminants. Here we report on new certified and reference concentrations for 27 polybrominated diphenyl ether (PBDE) congeners in seven different SRMs: cod-liver oil, whale blubber, fish tissue (two materials), mussel tissue and sediment (two materials). PBDEs were measured in these SRMs, with the lowest concentrations measured in mussel tissue (SRM 1974b) and the highest in sediment collected from the New York/New Jersey Waterway (SRM 1944). Comparing the relative PBDE congener concentrations within the samples, we found the biota SRMs contained primarily tetrabrominated and pentabrominated diphenyl ethers, whereas the sediment SRMs contained primarily decabromodiphenyl ether (BDE 209). The cod-liver oil (SRM 1588b) and whale blubber (SRM 1945) materials were also found to contain measurable concentrations of two methoxylated PBDEs (MeO-BDEs). Certified and reference concentrations are reported for 12 PBDE congeners measured in the biota SRMs and reference values are available for two MeO-BDEs. Results from a sediment interlaboratory comparison PBDE exercise are available for the two sediment SRMs (1941b and 1944).     

Comparison of methods for the gas-chromatographic determination of PCB congeners and chlorinated pesticides in marine reference materials

Summary Three gas-chromatographic (GC) columns with different selectivity (DB-5, DB-1701, and C-18) and two different GC detectors (electron-capture and mass-spectrometric) were used to analyze three Standard Reference Materials (SRMs), which are available from the National Institute of Standards and Technology (NIST), and two Certified Reference Materials (CRMs), which are available from the Community Bureau of Reference (BCR), for polychlorinated biphenyl (PCB) congeners and chlorinated pesticides. The materials analyzed were: SRM 1588, Organics in Cod Liver Oil; SRM 1941, Organics in Marine Sediment; SRM 1974, Organics in Mussel Tissue (Mytilus edulis); CRM 349, Chlorobiphenyls in Cod Liver Oil; and CRM 350, Chlorobiphenyls in Mackerel Oil. Results from these different methods are compared, and concentrations for additional PCB congeners and chlorinated pesticides in these reference materials, which have not been measured previously, are reported.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday