Operation modes of the helium dielectric barrier discharge for soft ionization

Among different applications of dielectric barrier discharge (DBD) plasma, the soft ionization ability is certainly one of the most interesting. In this paper the helium plasma jet, produced by a capillary DBD, penetrating in the ambient atmosphere, has been spectroscopically investigated in dependence on applied voltage and helium flow. It was found that the change of the applied voltage leads to different discharge modes. Based on the measurements of the emission spectra of atomic He and N₂⁺ and N₂ molecules in the capillary and in the plasma jet with high spatial resolution, it can be assessed in which mode, i.e. under which conditions the plasma jet is expected to be most effective for soft ionization of molecules.     

介质阻挡放电离子源质谱分析

敞开式离子化质谱可对表面样品进行直接快速分析而受到关注,成为质谱分析的热点研究方向.介质阻挡放电离子源是一种基于等离子体放电机理的敞开式离子源,近年来得到了较快的发展.本文着重介绍该离子源的基本原理、性能特征以及应用进展,并对其发展趋势进行了展望.     

Discriminating alkylbenzene isomers with tandem mass spectrometry using a dielectric barrier discharge ionization source

Soft ambient ionization sources generate reactive species that interact with analyte molecules to form intact molecular ions, which allows rapid, sensitive, and direct identification of the molecular mass. We used a dielectric barrier discharge ionization (DBDI) source with nitrogen at atmospheric pressure to detect alkylated aromatic hydrocarbon isomers (C₈H₁₀ or C₉H₁₂). Intact molecular ions [M]^•+ were detected at 2.4 kV_pp, but at increased voltage (3.4 kV_pp), [M + N]⁺ ions were formed, which could be used to differentiate regioisomers by collision-induced dissociation (CID). At 2.4 kV_pp, alkylbenzene isomers with different alkyl-substituents could be identified by additional product ions: ethylbenzene and -toluene formed [M-2H]⁺, isopropylbenzene formed abundant [M-H]⁺, and propylbenzene formed abundant C₇H₇⁺. At an operating voltage of 3.4 kV_pp, fragmentation of [M + N]⁺ by CID led to neutral loss of HCN and CH₃CN, which corresponded to steric hindrance for excited state N-atoms approaching the aromatic ring (C-H). The ratio of HCN to CH₃N loss (interday relative standard deviation [RSD] < 20%) was distinct for ethylbenzene and ethyltoluene isomers. The greater the number of alkyl-substituents (C-CH₃) and the more sterically hindered (meta > para > ortho) the aromatic core, the greater the loss of CH₃CN relative to HCN was.     

Development of a dielectric barrier discharge ion source for ambient mass spectrometry

A new ion source based on dielectric barrier discharge was developed as an alternative ionization source for ambient mass spectrometry. The dielectric barrier discharge ionization source, termed as DBDI herein, was composed of a copper sheet electrode, a discharge electrode, and a piece of glass slide in between as dielectric barrier as well as sample plate. Stable low-temperature plasma was formed between the tip of the discharge electrode and the surface of glass slide when an alternating voltage was applied between the electrodes. Analytes deposited on the surface of the glass slide were desorbed and ionized by the plasma and the ions were introduced to the mass spectrometer for mass analysis. The capability of this new ambient ion source was demonstrated with the analysis of 20 amino acids, which were deposited on the glass slide separately. Protonated molecular ions of [M + H](+) were observed for all the amino acids except for L-arginine. This ion source was also used for a rapid discrimination of L-valine, L-proline, L-serine and L-alanine from their mixture. The limit of detection was 3.5 pmol for L-alanine using single-ion-monitoring (SIM). Relative standard deviation (RSD) was 5.78% for 17.5 nmol of L-alanine (n = 5). With the advantages of small size, simple configuration and ease operation at ambient conditions, the dielectric barrier discharge ion source would potentially be coupled to portable mass spectrometers.     

热辅助解吸-介质阻挡放电离子化质谱快速检测磺胺类药物

磺胺类药物在家禽养殖行业中的滥用是一个极其严重的问题。该文采用一种热辅助解吸介质阻挡放电离子化质谱技术(HAD-DBDI-MS),通过对其加热温度等参数的优化,建立了对磺胺吡啶、磺胺间甲氧嘧啶、磺胺喹口恶啉、磺胺胍及磺胺甲口恶唑等磺胺类药物的快速检测方法,并通过二级质谱进行结构鉴定;与单独使用DBDI-MS相比,HAD-DBDI-MS的检出限降低了1～2个数量级。对鸡肉模拟加标进行了直接快速检测应用,实现了鸡肉中模拟添加磺胺吡啶的检出;通过在加热时引入甲醇辅助挥发,实现了对饲料模拟加标压片样品中磺胺胍、磺胺甲口恶唑的检出。结果表明,HAD-DBDI-MS为禽类肉制品和饲料中磺胺类药物的快速检测提供了一种新的方法。     

Explosive detection using a novel dielectric barrier discharge ionisation source for mass spectrometry

The detection of explosives is of great importance, as is the need for sensitive, reliable techniques that require little or no sample preparation and short run times for high throughput analysis. In this work, a novel ionisation source is presented based on a dielectric barrier discharge (DBD). This not only affects desorption and ionisation but also forms an ionic wind, providing mass transportation of ions towards the mass spectrometer. Furthermore, the design incorporates 2 asymmetric alumina sheets, each containing 3 DBDs, so that a large surface area can be analysed. The DBD operates in ambient air, overcoming the limitation of other plasma‐based techniques which typically analyse smaller surface areas and require solvents or gases. A range of explosives across 4 different functional groups was analysed using the DBD with low limits of detection for cyclotrimethylene trinitramine (RDX) (100 pg), pentaerythritol trinitrate (PETN) (100 pg), hexamethylene triperoxide diamide (HMTD) (1 ng), and trinitrotoluene (TNT) (5 ng). Detection was achieved without any sample preparation or the addition of reagents to facilitate adduct formation.     

Towards the electrospray ionization mass spectrometry ionization efficiency scale of organic compounds

An approach that allows setting up under predefined ionization conditions a rugged self-consistent quantitative experimental scale of electrospray ionization (ESI) efficiencies of organic compounds is presented. By ESI ionization efficiency (IE) we mean the efficiency of generating gas-phase ions from analyte molecules or ions in the ESI source. The approach is based on measurement of relative ionization efficiency (RIE) of two compounds (B1 and B2) by infusing a solution containing both compounds at known concentrations (C1 and C2) and measuring the mass-spectrometric responses of the protonated forms of the compounds (R1 and R2). The RIE of B1 and B2 is expressed as logRIE(B1, B2) = log[(R1 . C2)/(C1 . R2)]. The relative way of measurement leads to cancellation of many of the factors affecting IE (ESI source design, voltages in the source and ion transport system, solvent composition, flow rates and temperatures of the nebulizing and drying gases). Using this approach an ESI IE scale containing ten compounds (esters and aromatic amines) and spanning over 4 logRIE units has been compiled. The consistency of the scale (the consistency standard deviation of the scale is s = 0.16 logRIE units) was assured by making measurements using different concentration ratios (at least 6-fold concentration ratio range) of the compounds and by making circular validation measurements (the logRIE of any two compounds was checked by measuring both against a third compound).     

Characterization of dielectric barrier electrospray ionization for mass spectrometric detection

A novel electrospray interface is presented which induces an electric field by dielectric polarization through a non-conductive barrier. Therefore, a square-wave high-voltage signal is applied. This technique allows mass spectrometric measurements in the positive as well as in the negative mass spectrometry mode without changing the polarity of the potential applied, and it decreases the risk of undesired discharges, induced by high electric currents. The applicability of this technique is demonstrated by mass spectrometric determination of reserpine.     

Coupling corona discharge for ambient extractive ionization mass spectrometry

Unlike the extractive electrospray ionization (EESI) technique described elsewhere, a corona discharge instead of electrospray ionization has been utilized to charge a neutral solvent spray under ambient conditions for the generation of highly charged microdroplets, which impact a neutral sample plume for the extractive ionization of the analytes in raw samples without any sample pretreatment. Using the positive ion mode, molecular radical cations were easily generated for the detection of non-polar compounds (e.g., benzene, cyclohexane, etc.), while protonated molecular ions of polar compounds (e.g., acetonitrile, acetic ether) were readily produced for the detection. By dispensing the matrix in a relatively large space, this method tolerates highly complex matrices. For a given sample such as lily fragrances, more compounds were detected by the method established here than the EESI technique. An acceptable relative standard deviation (RSD 8.9%, n = 11) was obtained for the direct measurement of explosives (10 ppb) in waste water samples. The experimental data demonstrate that this method could simultaneously detect both polar and non-polar analytes with high sensitivity, showing promising applications for the rapid detection of a wide variety of compounds present in complex matrices.     

Computer simulations of a dielectric barrier discharge used for analytical spectrometry

A model developed for a dielectric barrier discharge (DBD) in helium, used as a new spectroscopic source in analytical chemistry, is presented in this paper. The model is based on the fluid approach and describes the behavior of electrons, He⁺ and ions, He metastable atoms, He atoms in higher excited levels, and He₂ dimers. The He ground-state atoms are regarded as background gas. The characteristic effect of charging/discharging of the dielectrics which cover both electrodes is also simulated. Typical results of the model include the distribution of potential inside the plasma (and the potential drop across the dielectrics), the electric current and gap voltage as a function of time for a given applied potential profile, the spatial and temporal number-density profiles of the different plasma species, and the relative contributions of the mechanisms of their production and loss. Figure Schematic diagram of the dielectric barrier discharge (left) and typical temporal profiles of voltage and current, as obtained from the simulations (right)     

Electrospray ionization tandem mass spectrometry in high-throughput screening of homogeneous catalysts

The frontispiece shows an illustration by John Tenniel and an excerpt from the 1865 edition of Lewis Carroll's "Alice in Wonderland". Because everything in Wonderland runs counter to logic, the Queen of Hearts declares in Alice's trial "Sentence first-verdict afterwards". High-throughput screening of catalysts, as it is conventionally practiced, does "Synthesis first-screening afterwards" which, as is argued in this review, also backwards. Given the particular constraints present in organometallic complexes, it is more efficient to develop a selective synthesis only when it has already been determined that a structure is likely to be better. The consequence is that screening methods must be able to handle ill-defined mixtures. Electrospray ionization tandem mass spectrometry is presented as a technical solution to this problem.     

Intermediate detection in real time using reactive surface desorption dielectric‐barrier discharge ionization mass spectrometry

Reactive intermediates play key roles for reaction mechanism elucidation. A suitable tool for identifying the key intermediates is crucial and highly desirable. In this study, surface desorption dielectric‐barrier discharge ionization (reactive SDDBDI) was developed for characterization of the reactive intermediates. In reactive SDDBDI, the plasma is doped with a reagent before the plasma ions are directed at a cover slip surface bearing another analyte. Different from SDDBDI, reactive SDDBDI can be used both as an ambient ionization source and as a means to produce reagent ions for ambient ion/molecule reactions. The online derivation of 4‐aminophenol with trifluoroacetic anhydride demonstrated that reactive SDDBDI can be used for chemical analysis where improved specificity or sensitivity is required. The utility of this approach for real‐time detection of reactive intermediate was demonstrated by the Schiff‐base and Eberlin reactions. The formed intermediates and products could be readily detected and identified by tandem mass spectrometry. These results indicate that reactive SDDBDI can be used to generate reagent ions that undergo ion/molecule reactions in the open air with an analyte at condensed phase on a surface. Reactive SDDBDI has high‐efficiency ion transmission and high MS sensitivity. It is thus a potential tool to perform ambient ion/molecule reactions and detect reactive intermediates.     

Direct detection of explosives on solid surfaces by mass spectrometry with an ambient ion source based on dielectric barrier discharge

Trace amounts of explosives on solid surfaces were detected by mass spectrometry at ambient conditions with a new technique termed dielectric barrier discharge ionization (DBDI). By the needle-plate discharge mode, a plasma discharge with energetic electrons was generated, which could launch the desorption and ionization of the explosives from solid surfaces. Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), 2,4,6-trinitrotoluene (TNT), and pentaerythritol tetranitrate (PETN) were desorbed directly from the explosives-contaminated surface by DBDI, forming the typical anions of [TNT](-), [TNT - H](-), [RDX + NO(2)](-), [PETN + ONO(2)](-), and [RDX + ONO(2)](-). The ions were transferred into the MS instrument for analysis in the negative ion mode. The detection limit of present method was 10 pg for TNT (m/z 197, S/N 8 : 1), 0.1 ng for RDX (m/z 284, S/N 10 : 1), and 1 ng for PETN (m/z 260, S/N 12 : 1). The present method allowed the detection of trace explosives on various matrices, including paper, cloth, chemical fiber, glass, paints, and soil. A relative standard deviation of 5.57% was achieved by depositing 100 pg of TNT on these matrices. The analysis of A-5, a mixture of RDX and additives, has been carried out and the results were consistent with the reference values. The DBDI-MS method represents a simple and rapid way for the detection of explosives with high sensitivity and specificity, which is especially useful when they are present in trace amounts on ordinary environmental surfaces.     

Direct analysis of anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption-dielectric barrier discharge ionization mass spectrometry

Rapid detection of trace level anabolic steroids in urine is highly desirable to monitor the consumption of performance enhancing anabolic steroids by athletes. The present article describes a novel strategy for identifying the trace anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption (LPTD) coupled to dielectric barrier discharge (DBD) ionization mass spectrometry. Using this method the steroid molecules are enriched within a liquid droplet during the thermal desorption process and desorbed all-together at the last moment of droplet evaporation in a short time domain. The desorbed molecules were ionized using a dielectric barrier discharge ion-source in front of the mass spectrometer inlet at open atmosphere. This process facilitates the sensitivity enhancement with several orders of magnitude compared to the thermal desorption at a lower temperature. The limits of detection (LODs) of various steroid molecules were found to be in the range of 0.05–0.1 ng mL⁻¹ for standard solutions and around two orders of magnitude higher for synthetic urine samples. The detection limits of urinary anabolic steroids could be lowered by using a simple and rapid dichloromethane extraction technique. The analytical figures of merit of this technique were evaluated at open atmosphere using suitable internal standards. The technique is simple and rapid for high sensitivity and high throughput screening of anabolic steroids in urine.     

Comparison of dielectric barrier discharge, atmospheric pressure radiofrequency-driven glow discharge and direct analysis in real time sources for ambient mass spectrometry of acetaminophen

Three plasma-based ambient pressure ion sources were investigated; laboratory constructed dielectric barrier and rf glow discharges, as well as a commercial corona discharge (DART source). All were used to desorb and ionize a model analyte, providing sampling techniques for ambient mass spectrometry (MS). Experimental parameters were optimized to achive highest signal for acetaminophen as the analyte. Insight into the mechanisms of analyte desorption and ionization was obtained by means of emission spectrometry and ion current measurements. Desorption and ionization mechanisms for this analyte appear to be identical for all three plasma sources. Emission spectra differ only in the intensities of various lines and bands. Desorption of solid analyte requires transfer of thermal energy from the plasma source to sample surface, in the absence of which complete loss of MS response occurs. For acetaminophen, helium was the best plasma gas, providing 100- to 1000-fold higher analyte response than with argon or nitrogen. The same trend was also evident with background ions (protonated water clusters). MS analyte signal intensity correlates with the ion density (expressed as ion current) in the plasma plume and with emission intensity from excited state species in the plasma. These observations support an ionization process which occurs via proton transfer from protonated water clusters to analyte molecules.     

Spatially resolved spectroscopic measurements of a dielectric barrier discharge plasma jet applicable for soft ionization

An atmospheric pressure microplasma ionization source based on a dielectric barrier discharge with a helium plasma cone outside the electrode region has been developed for liquid chromatography/mass spectrometry and as ionization source for ion mobility spectrometry. It turned out that dielectric barrier discharge ionization could be regarded as a soft ionization technique characterized by only minor fragmentation similar to atmospheric pressure chemical ionization (APCI). Mainly protonated molecules were detected. In order to characterize the soft ionization mechanism spatially resolved optical emission spectrometry (OES) measurements were performed on plasma jets burning either in He or in Ar. Besides to spatial intensity distributions of noble gas spectral lines, in both cases a special attention was paid to lines of N₂⁺ and N₂. The obtained mapping of the plasma jet shows very different number density distributions of relevant excited species. In the case of helium plasma jet, strong N₂⁺ lines were observed. In contrast to that, the intensities of N₂ lines in Ar were below the present detection limit. The positions of N₂⁺ and N₂ distribution maxima in helium indicate the regions where the highest efficiency of the water ionization and the protonation process is expected.