A simple orbital basis set for π electron calculations of the polarizabilities and hyperpolarizabilities of conjugated systems

Within the theory of coupled clusters, it is proposed to use the orbital basis set of ethylene molecules in the π electron calculations of the polarizabilities and hyperpolarizabilities of conjugated systems. Test calculations show high accuracy of the method in comparison with the full configuration interaction method.     

A volume-amending method to improve mass conservation of level set approach for incompressible two-phase flows

A volume-amending method is developed both to keep the level set function as an algebraic distance function and to preserve the bubble mass in a level set approach for incompressible two-phase flows with the significantly deformed free interface. After the traditional reinitialization procedure, a vol-ume-amending method is added for correcting the position of the interface according to mass loss/gain error until the mass error falls in the allowable range designated in advance. The level set approach with this volume-amending method incorporated has been validated by three test cases: the motion of a single axisymmetrical bubble or drop in liquid, the motion of a two-dimensional water drop falling through the air into a water pool, and the interactional motion of two buoyancy-driven three- dimensional deformable bubbles. The computational results with this volume-amending method in-corporated are in good agreement with the reported experimental data and the mass is well preserved in all cases.     

Nonaqueous Emulsions – A Versatile Tool for New Types of Functional Nanoparticles

Summary : The preparation of functional polymer latex particles is usually carried out in aqueous heterogeneous systems, i.e. for example in emulsion or mini-emulsion polymerization. Due to the presence of water, moisture sensitive reactions like step growth polymerizations or metal catalyzed reactions can not be accomplished without side reactions and / or decomposition. In order to avoid these side reactions, different nonaqueous emulsion systems have been developed. According to the desired polymerization procedure, these systems consist of a nonpolar organic phase surrounded by a perfluorinated solvent or of a polar organic phase which is dispersed in a nonpolar organic solvent. Both emulsions are stabilized by amphipolar block copolymers and result in long time stable particle dispersions. The resulting dispersions yield particles with narrow size distributions and – depending on the reaction conditions – diameters down to tens of nanometers. This technique allows the formation of particles consisting of numerous different classes of polymers, e.g. polyurethanes, polyesters, polyolefins etc. and the formation of more complex morphologies such as core shell structures.     

Formal synthesis of Pellasoren – A

A convergent and highly stereoselective formal synthesis of Pellasoren – A is described. The salient features of the synthesis are the utilization of enzymatic desymmetrization, Crimmin’s non-Evans syn aldol, Lindlar’s and Wittig reaction.     

Spirulina platensis – A novel green inhibitor for acid corrosion of mild steel

The inhibition of the corrosion of mild steel in 1 M HCl and 1 M H₂SO₄ by Spirulina platensis has been studied at different temperatures viz., 303 K, 313 K and 323 K by weight loss method, potentiodynamic polarization method, electrochemical impedance spectroscopy measurements and SEM analysis. The inhibition efficiency increased with increasing concentration of the inhibitor in both HCl and H₂SO₄ media. The results of weight loss studies correlated well with those of impedance and polarization studies. From the results of weight loss studies at various temperatures, the mode of adsorption is confirmed to be physisorption. Further the adsorption has been found to follow Temkin isotherm. From this isotherm, the free energy of adsorption (ΔG) and entropy (ΔS) are calculated. The study reveals the corrosion inhibition potential of S. platensis in both the acid media, thus bringing to light another facet of this microalga as it has so far been used only to produce antioxidant principles, finding extensive use in medicine especially as neutraceutical.     

GC–FID as a primary method for establishing the purity of organic CRMs used for drugs in sport analysis

The National Analytical Reference Laboratory has synthesized and characterized 67 anabolic steroid marker metabolites, both unlabelled and deuterated, and 37 key glucuronide and sulfate steroid conjugate pure substance reference materials. Work is also in process to establish their full traceability so that they can be issued as certified and primary reference materials. Both identity and purity have been rigorously characterized using a number of techniques and a primary method for purity assessment developed, based gas chromatography combined with flame ionization detection for the parent steroids and HPLC with evaporative light scattering detection for non-volatile steroid conjugates. Strategies for establishing traceability and for estimating measurement uncertainty are reported. The strategies described are considered applicable to a wide range of organic pure substance reference materials.     

Validation of chemometric models – A tutorial

In this tutorial, we focus on validation both from a numerical and conceptual point of view. The often applied reported procedure in the literature of (repeatedly) dividing a dataset randomly into a calibration and test set must be applied with care. It can only be justified when there is no systematic stratification of the objects that will affect the validated estimates or figures of merits such as RMSE or R². The various levels of validation may, typically, be repeatability, reproducibility, and instrument and raw material variation. Examples of how one data set can be validated across this background information illustrate that it will affect the figures of merits as well as the dimensionality of the models. Even more important is the robustness of the models for predicting future samples. Another aspect that is brought to attention is validation in terms of the overall conclusions when observing a specific system. One example is to apply several methods for finding the significant variables and see if there is a consensus subset that also matches what is reported in the literature or based on the underlying chemistry.     

Bioanalytical chemistry of cytokines – A review

Cytokines are bioactive proteins produced by many different cells of the immune system. Due to their role in different inflammatory disease states and maintaining homeostasis, there is enormous clinical interest in the quantitation of cytokines. The typical standard methods for quantitation of cytokines are immunoassay-based techniques including enzyme-linked immusorbent assays (ELISA) and bead-based immunoassays read by either standard or modified flow cytometers. A review of recent developments in analytical methods for measurements of cytokine proteins is provided. This review briefly covers cytokine biology and the analysis challenges associated with measurement of these biomarker proteins for understanding both health and disease. New techniques applied to immunoassay-based assays are presented along with the uses of aptamers, electrochemistry, mass spectrometry, optical resonator-based methods. Methods used for elucidating the release of cytokines from single cells as well as in vivo collection methods are described.     

A new tool for the study of polymerization under supercritical conditions – preliminary results

Efficient stirring is needed to realize heat flow analysis with a thermally homogeneous medium. Because dispersion polymerization with supercritical fluids can be destabilized under stirring, a preliminary target has been to find a compromise between synthesis and basic reaction calorimetry requirements. This paper describes the use of poly (dimethylsiloxane) macromonomer with a molecular weight 5000 g/mol as stabilizer for the dispersion polymerization of methyl methacrylate in supercritical carbon dioxide. The effect of stirring speed and stabilizer concentration has been examined. This study has shown that poly (methyl methacrylate) can be produced at high yield and molecular weight using 10 wt% (respect to monomer) poly (dimethylsiloxane) macromonomer at stirring speeds up to 600 rpm. A polymerization enthalpy of −57.6±2 kJ/mol has been calculated being in good agreement with previously reported data. Thus, preliminary results for the heat balance using the newly developed high pressure reaction calorimeter for supercritical fluid applications have shown the important potential of reaction calorimetry to promote supercritical fluid technologies at industrial scale allowing for the determination of kinetics and thermodynamic and safety data, respectively.     

Suitability of different containers for the sampling and storage of biogas and biomethane for the determination of the trace-level impurities – A review

The traceable and accurate measurement of biogas impurities is essential in order to robustly assess compliance with the specifications for biomethane being developed by CEN/TC408. An essential part of any procedure aiming to determinate the content of impurities is the sampling and the transfer of the sample to the laboratory. Key issues are the suitability of the sample container and minimising the losses of impurities during the sampling and analysis process. In this paper, we review the state-of-the-art in biogas sampling with the focus on trace impurities. Most of the vessel suitability studies reviewed focused on raw biogas. Many parameters need to be studied when assessing the suitability of vessels for sampling and storage, among them, permeation through the walls, leaks through the valves or physical leaks, sorption losses and adsorption effects to the vessel walls, chemical reactions and the expected initial concentration level. The majority of these studies looked at siloxanes, for which sampling bags, canisters, impingers and sorbents have been reported to be fit-for-purpose in most cases, albeit with some limitations. We conclude that the optimum method requires a combination of different vessels to cover the wide range of impurities commonly found in biogas, which have a wide range of boiling points, polarities, water solubilities, and reactivities. The effects from all the parts of the sampling line must be considered and precautions must be undertaken to minimize these effects. More practical suitability tests, preferably using traceable reference gas mixtures, are needed to understand the influence of the containers and the sampling line on sample properties and to reduce the uncertainty of the measurement.     

Process development of ABT-450 – A first generation NS3/4A protease inhibitor for HCV

ABT-450 (8), a potent hepatitis C (HCV) NS3/4A protease inhibitor, was approved as part of AbbVie's first generation HCV treatment for the United States in December 2014. A series of process optimizations were developed over six years to support the program starting with recycling of a previous protease inhibitor candidate through route development and final process. This discussion will focus on optimization of the final six steps starting from dipeptide 12 and amino acid 13 and highlights the use of a large scale ring closing metathesis (RCM), reactive crystallizations for isolation of intermediates, and detailed process understanding of the final sulfonamide coupling. The process provides ABT-450 (8) in 72% overall yield for the final 6 steps.     

Using inductively coupled plasma–mass spectrometry for calibration transfer between environmental CRMs

Multielement analyses of environmental reference materials have been performed using existing certified reference materials (CRMs) as calibration standards for inductively coupled plasma–mass spectrometry. The analyses have been performed using a high-performance methodology that results in comparison measurement uncertainties that are significantly less than the uncertainties of the certified values of the calibration CRM. Consequently, the determined values have uncertainties that are very nearly equivalent to the uncertainties of the calibration CRM. Several uses of this calibration transfer are proposed, including, re-certification measurements of replacement CRMs, establishing traceability of one CRM to another, and demonstrating the equivalence of two CRMs. RM 8704, a river sediment, was analyzed using SRM 2704, Buffalo River Sediment, as the calibration standard. SRM 1632c, Trace Elements in Bituminous Coal, which is a replacement for SRM 1632b, was analyzed using SRM 1632b as the standard. SRM 1635, Trace Elements in Subbituminous Coal, was also analyzed using SRM 1632b as the standard.     

Rubber Powder – A Perspective Filler of Thermoplastics

Rubber powder, ground at ambient temperature, was compounded with polypropylene using only 16 L/D of a co-rotating twin screw extruder. An optimum of extruder configuration and selected process parameters were found for compounds with a rubber filling rate of 50 wt.-%. Restrictions of a reactive compounding were taken into account. The dispersion of the rubber powder is not a limiting process. A compound containing 70 wt.-% rubber powder showed to be overfilled.     

Current analytical methods for plant auxin quantification – A review

Plant hormones, and especially auxins, are low molecular weight compounds highly involved in the control of plant growth and development. Auxins are also broadly used in horticulture, as part of vegetative plant propagation protocols, allowing the cloning of genotypes of interest. Over the years, large efforts have been put in the development of more sensitive and precise methods of analysis and quantification of plant hormone levels in plant tissues. Although analytical techniques have evolved, and new methods have been implemented, sample preparation is still the limiting step of auxin analysis. In this review, the current methods of auxin analysis are discussed. Sample preparation procedures, including extraction, purification and derivatization, are reviewed and compared. The different analytical techniques, ranging from chromatographic and mass spectrometry methods to immunoassays and electrokinetic methods, as well as other types of detection are also discussed. Considering that auxin analysis mirrors the evolution in analytical chemistry, the number of publications describing new and/or improved methods is always increasing and we considered appropriate to update the available information. For that reason, this article aims to review the current advances in auxin analysis, and thus only reports from the past 15 years will be covered.     

Camphoric carbon nanobeads – A new electrode material for supercapacitors

For the first time activated carbon nanobeads have been synthesized for supercapacitor applications by a simple pyrolysis technique. TEM analysis suggests the size of the carbon nanobeads are around 40 nm and XRD measurement reveals an amorphous structure. The average surface area of the nanobeads by BET studies is measured to be 79.6 m²/g, which is higher than the previously reported values. This cell shows an excellent cycleability successfully cycled more than 100,000 cycles and with minimum IR drop. It is suggested that this carbon nanobeads may be used as an active electrode material for supercapacitor applications.     

Bipolar Electrode-based Electrochromic Devices for Analytical Applications – A Review

Bipolar electrode-based (BPE-based) electrochromic devices have garnered increasing attention in the past decade. These BPE-based electrochromic devices have been used for analytical health monitoring, point-of-care (POC) diagnostics, and chemical sensing. In this review, we highlight recent progress made regarding BPE-based electrochromic devices constructed for these analytical applications. Various, available electrochromic materials are summarized in the first section, after which the different device types (e. g., paper-based and self-powered) are discussed. Biological- and chemical-based analytical demonstrations of these devices are then reviewed. Finally, we conclude this review with a perspective on the future developments of BPE-based electrochromic devices in analytical applications.     

River sediment (S-37) – A new analytical quality control material ensuring comparability of chlorinated hydrocarbon analysis during an international environmental study in China

A sediment reference material (S-37) was prepared as analytical quality control material to be used within an international project on polychlorinated hydrocarbon analysis in two Chinese rivers. The raw material was sampled during a cruise on Yangtse River and transported afterwards to the JRC Ispra for further processing. The material was treated according to the general principles applicable for candidate reference material production. After a thorough homogeneity study of the bulk the material was bottled. A total of 1080 bottles each containing 50 g of dry sediment powder was obtained. Final homogeneity and stability testing proved the material to be fit for the purpose. Isotope dilution GC/MS was used to establish target values for pentachlorobenzene (1.17 ± 0.08 ng/g), hexachlorobenzene (3.60 ± 0.17 ng/g), octachlorostyrene (0.19 ± 0.01 ng/g), pentachloroanisole (0.52 ± 0.02 ng/g), α-HCH (0.70 ± 0.05 ng/g), β-HCH (1.38 ± 0.18 ng/g), γ-HCH (0.83 ± 038 ng/g), 2,4′-DDT (0.36 ± 0.04 ng/g), 2,4′-DDE (0.29 ± 0.02 ng/g), 2,4′-DDD (0.49 ± 0.02), 4,4′-DDT (3.42 ± 0.47 ng/g), 4,4′-DDD (1.29 ± 0.17 ng/g), PCB 28 (0.11 ± 0.01 ng/g), PCB 52 (0.09 ± 0.003 ng/g), PCB 101 (0.07 ± 0.003 ng/g), PCB 138 (0.06 ± 0.003 ng/g) and PCB 153 (0.06 ± 0.003 ng/g). Furthermore, indicative values for major and minor constituents as well as for polychlorinated dibenzodioxines and -furanes were measured.     

Sorbent materials for separation and preconcentration of gold in environmental and geological samples – A review

Determination of gold in environmental and geological samples requires very often preconcentration and separation due to the high concentration of interfering matrix components and the low content of this metal. Solid phase extraction technique with different kind of solid sorbents offers for this purpose high enrichment factor, rapid phase separation and the ability of combination with different detection techniques. It can be easily implemented and controlled in flow systems, The recent developments in this area are presented and discussed.