Kinetische und mechanistische untersuchungen von Übergangsmetall-komplex-reaktionen : III. Abhängigkeit des gleichgewichts der addition von tributylphosphan an pentacarbonyl(arylmethoxycarben)wolfram vom substituenten am ring

The reaction of pentacarbonyl(arylmethoxycarbene)tungsten, (CO)₅W[C(OCH₃(p-C₆H₄R)] [R = OCH₃ (a), CH₃ (b), H (c), Br (d), CF₃ (e)], with tributylphosphane at low temperatures results in a reversible addition of the phosphane to the carbene carbon atom. The addition—dissoziation equilibrium is not only dependent on the temperature but also to a strong degree on the nature of the substituent R. ΔG, ΔH and the equilibrium constant K increase in the series from R = OCH₃ to R = CF₃. With the exception of R = OCH₃ the substituents b to e form an isentropic class. For all substituents (a to e) a linear dependency from Jaffés σ-constants was observed for ΔH. Good linear correlation for the substituents b to e was also found for log K and σ as well as for log K and the CO-force constants k_cis and k_trans.     

Synthesis and characterization of dinuclear p-, m- and o-xylyl bridged complexes of molybdenum and tungsten. The crystal structures of μ-p-xylyl- bis(η-pentamethyl-cyclopentadienyltri- carbonylmolybdenum) and μ-m-xylyl-bis(η- pentamethylcyclopentadienyltricarbonyltungsten)

The reactions of η⁵-Cp^*M(CO)₃Na (M = Mo, W) with ,′-p-, m- and o-dichloro-xylenes yielded p-, m- and o-xylyl bridged dinuclear complexes of η⁵-Cp^*M(CO)₃ in high yields. All of such new complexes are stable to air and water, even stable in dilute acids and bases.     

Synthesis of New Chiral Bis(BINOL) Substituted 2,2''''-Bipyridine Ligands

Chiral 2,2'-bipyridines have been reported to be highly efficient catalysts and useful building blocks of supramolecular.[1,2] Chirality of bipyridines was introduced by chiral substituents. Because 1,1'-binaphthyl (BINOL) and its derivatives belong to the most important components of asymmetric catalysts, we would like to synthesize 5,5'-and 6,6'-positions substituted chiral bipyridine-type ligands, the chiral moieties of ligands originate from enationpure 1, 1'-binapthyl units.     

Excess differential thermodynamic properties

A strategy is described for the systematic generation of a complete set of partial derivatives of the four energy functions from a basis set of five measured properties: V_m, S_m, C_p,m (δV_m/δT)_p and either (δV_m/δp)_T or (δV_m/δp)_s. The same set of equations applies to both pure substances and either real or ideal mixtures.

Examples are given of some excess differential properties of binary mixtures which exhibit unusual sensitivity to changes in composition.     

Reactivity of niobocene dihalogenides toward nitroso derivatives. EPR and IR characterization of the first niobium(IV) complexes containing an ArNO-N,O ligand

The reaction of [Nb(η⁵-C₅H₄R)₂X₂] [1: R = SiMe₃, X = Cl; 2: R = SiMe₃, X = Br; 3: R = H, X = Cl; 4: R =^t, X = Cl] with nitroso derivatives ArNO [a: Ar = Ph; b: Ar = o-CH₃-C₃H₄; c: Ar = p-(CH₃)₂NC₆H₄] yields paramagnetic complexes formulated as [Nb(η⁵-C₅H₄R)(η³-C₅H₄R)X₂(ArNO-N,O) 1a, 1b, 1c, 2a, 3a, 4a and 4c, which have been characterized by ESR and IR spectroscopy.     

Thermochemistry of adducts of some bivalent transition metal bromides with 4-chloroaniline

The compounds [MBr₂(p-clan)₂] (where M is Mn(II), Fe(II), Co(II), Ni(II), Cu(II) or Zn(II); p-clan = 4-chloroaniline) were synthesized and characterized by melting points, elemental analysis, thermal analysis and electronic and IR spectroscopy. The enthalpies of solution of the adducts, metal(II) bromides and 4-chloroaniline in methanol, 1.2 M aqueous HCl or 25% (v/v) 1.2 M aqueous HCl in methanol were measures and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_rH°), the standard enthalpies of formation (Δ_fH°), the standard enthalpies of decomposition (Δ_DH°), the lattice standard enthalpies (Δ_MH°) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH°(g)). The mean bond dissociation enthalpies of the metal(II)-nitrogen coordinated bonds and the enthalpies of adduct formation in the gaseous phase have been estimated.     

Regioselective addition of chalcogenol to an η-propargyl/allenyl complex via formation of the carbon-chalcogen bond leading to new chalcogenoxyallyl species

Regioselective addition of chalcogenol to an ν³-propargyl complex Pt(PPh₃)₂(η³-C₃H₃)](BF₄) (2) via the formation of the C---O, C---S, or C---Se bond generates new cationic chalcogenoxyallyl species {Pt(PPh₃)₂[η³CH₂C(ER)CH₂]}(BF₄) (E = O, R = Me 4(a), Et (4b, ⁱPr (4c), ¹Bu (4d), Ph (4e); E=S, E=Et (5b), ^tBu (5d, Ph (5e); E=Se, R=Ph (6e )) respectively in good yields. Thiol and selenol react with complex 2 much faster than alcohol; and 2 reacts with p-(HO)C₆H₄(SH) to exclusively yield the thioxyallyl product {Pt(PPh₃)₂[η³-CH₂C(SC₆H₄OH)CH₂]}(BF₄) (5f). Among the alcoh and phenol, thereactivity follows the order MeOH > EtOH >, ⁱPrOH >, ^tBuOH > PhOH. A mechanism comprising a preceding coordination step is postulated. The X-ray structures of 4b, 4e, 5b, 5e and 6e are provided.     

Cholesteric induction power of β-galactose derivatives

Galactose derivatives were explored as chiral dopants, effective for inducing chiral nematic liquid crystal (LC) phases. Galactose bearing O-isopropylidene substituents at the C3 and C4 and butoxybiphenyl substituents at the C2 and C6 positions exhibits a high helical twisting power (HTP) value of ?74.4 μm^?1. Such a high HTP value for the galactose derivative is attributed to (1) linkage of the C3 and C4 carbons with the O-isopropylidene substituent, which places the C2 and C6 substitutes in a skew arrangement at a large angle and (2) enhancement of the affinity with the host nematic LCs by incorporating aromatic substituents at the C2 and C6 positions that are similar to those in the host.     

A study of ortho- and para-siloxyanilines for the synthesis of mono-, bi-, and tetra-nuclear early transition metal–imido complexes

The siloxyanilines o-Me₃SiOC₆H₄NH₂ (1) and p-RMe₂SiOC₆H₄NH₂ (R=H (2); R=Me (3)), and their N-silylated derivatives p-Me₃SiOC₆H₄NHSiMe₃ (4) and p-Me₃SiOC₆H₄N(SiMe₃)₂ (5) have been prepared from ortho- or para-aminophenol and used in the synthesis of imido complexes. Thus, binuclear [{Ti(η⁵-C₅H₅)Cl}{μ-NC₆H₄(p-OSiMe₃)}]₂ (6) and mononuclear [TiCl₂{NC₆H₄(p-OSiMe₃)}(py)₃] (7) imido complexes have been obtained from the reaction of 3 and [Ti(η⁵-C₅H₅)Cl₃] or [TiCl₂(N^tBu)(py)₃], respectively. In contrast, the reaction of 1 with TiCl₄ and ^tBupy affords the titanocycle [TiCl₂{OC₆H₄(o-NH)---N,O}(^tBupy)₂] (8). Compound 5 has also been used to prepare the niobium imide complex [NbCl₃{NC₆H₄(p-OSiMe₃)}(MeCN)₂] (9), by its reaction with NbCl₅ in CH₃CN. These findings have been applied to the synthesis of polynuclear systems. Thus, chlorocarbosilane Si[CH₂CH₂CH₂Si(Me)₂Cl]₄ (CS–Cl) has been functionalized with the ortho- and para-aminophenoxy groups to give 10 and 11, respectively. The use of 11 has allowed the formation of the tetranuclear compound 12. Attempts to synthesize terminal imido titanium complexes from 10 and TiCl₄ in the presence of ^tBupy and Et₃N, give complex 8 and carbosilane CS–Cl.     

High pressure studies of the static permittivity tensor components in the nematic phase of 6CB

The dielectric permittivity tensor components, ε_II and ε_⊥, in the nematic phase of 6CB (4-n-hexyl-4'-cyanobiphenyl) were measured in the pressure range 0.1-130 MPa and the temperature range 12-58°C. The dielectric anisotropy, Δε(p, V, T) = ε_II - ε_⊥, was analysed in isothermal, isobaric and isochoric conditions taking into account the pVT data and the well known Maier and Meier equation. On that basis the nematic order parameter S(p, V, T) was determined. This was used to calculate the parameter Γ relating the interaction potential with the volume (density). Its value Γ = 4.1 agrees very well with other estimates.     

NMR conformational studies of (1,2-bis(diarylphosphino) ethane) -(diorgano sulfide) ruthenium complexes

Some (η⁵-cyclopentadienyl)(1,2-bis(diarylphosphino)ethane)(diorganosulfide)ruthenium complexes, [Ru(η⁵-C₅H₅)(Ar₂PCH₂CH₂-PAr₂)(R¹R ²S)]BF₄ (Ar = Ph, p-Tol; R¹, R² = Ph, Et) were prepared. Variable temperature NMR spectra of these complexes showed the existence of two fluxional processes; inversion at the sulfur atom and δ-λ interconversion of the chelate ring. The former process was slower, and its barriers in these complexes were calculated as ca. 7 kcal mol⁻¹. The spectral features of ethyl phenyl sulfide complexes suggested that substantiation of the new chiral center at sulfur induces a significant conformational rigidity at the chelate ring.     

Multimetal Fischer carbene complexes of Group VI transition metals: synthesis, structure and substituent effect investigation

Fischer carbene complexes of tungsten with substituents containing up to two additional different transition metals, with all the metals in electronic contact with the carbene carbon atom, were synthesised and studied both in solution and in the solid state. For the complexes of the type [W(CO)(5){C(OR')R}], the substituents chosen were heteroaromatic 2-benzo[b]thienyl (2-BT), or 2-BT π-bonded to a chromium tricarbonyl fragment ([Cr(CO)(3)(2-η(6)-BT)]) or ferrocenyl (Fc) as the R-substituent, while the OR'-substituent was systematically varied between an ethoxy or a titanoxy group, to yield the complexes 1b (R' = Et, R = 2-BT), 2b (R' = Et, R = [Cr(CO)(3)(2-η(6)-BT)]), 3b (R' = TiCp(2)Cl, R = 21-BT), 4b (R' = TiCp(2)Cl, R = [Cr(CO)(3)(2-η(6)-BT)]), 5b (R' = Et, R = Fc) and 6b (R' = TiCp(2)Cl, R = Fc). The structural features and their relevance to bonding in the multimetal carbene compounds of both these tungsten and the analogous chromium complexes were investigated as they represent indicators of possible reactivity sites in multimetal carbene assemblies. The possibility of using DFT calculations to quantify the effect of metal-containing substituents on the carbene ligands was tested and correlated with experimental parameters by employing methods such as vibrational spectroscopy, molecular orbital analysis, and cyclic voltammetry.     

Synthesis and electrochemistry of organometallic ethanethiolato bridged complexes of ruthenium(IV)

Reaction of the ruthenium(IV) chloro-bridged dimer [{Ru(η³ : η³-C₁₀H₁₆)Cl(μ-Cl)}₂], 1, with ethanethiol (EtSH) in CH₂Cl₂ gives the bridged-cleaved adduct [Ru(η³ : η³-C₁₀H₁₆)Cl₂(SHEt)], 2. Stirring of two molar equivalents of 2 in methanol with one equivalent of 1 gives the binuclear, mixed chloro/thiolato bridged compound [{Ru(η³ : η³-C₁₀H₁₆)Cl} ₂(μ-SEt)], 3. The related doubly thiolato bridged complex [{Ru(η³ : η³-C₁₀H₁₀)Cl(μ-SEt)}₂], 4, is formed by treatment of 1 with an excess of EtSH, or by prolonged stirring of 2 alone in methanol. Compounds 2–4 have been studied by cyclic voitammetry. Compound 2 undergoes only irreversible oxidation, whereas in the case of both 3 and 4 the observation of significant return waves is consistent with a greater stability of the primary redox products.     

Surface activity and thermodynamic of micellization and adsorption for isooctylphenol ethoxylates, phosphate esters and their mixtures with N-diethoxylated perfluorooctanamide

Three nonionic surfactants; p-isooctylphenol ethoxylates p-[i-OPE10], p-[i-OPE15], and p-[i-OPE20], were phosphorylated to produce three anionic phosphate ester surfactants. In addition, N-diethoxylated perfluorooctanamide (N-DEFOA) was also prepared. The surface and thermodynamic properties of the three types of surfactants and mixtures of the fluorocarbon surfactant (FC) with the hydrocarbon surfactants (HC) have been investigated. Surface tension as a function of concentration of the surfactant in aqueous solution was measured at 30, 40, 50 and 60°C, using the spinning drop technique. From these measurements the critical micelle concentration (CMC), the surface tension at the CMC (γ_CMC), the maximum surface excess concentration (Γ_max), the minimum area per molecule at the aqueous solution/air interface (A_min), and the effectiveness of surface tension reduction (π_CMC), were calculated. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) for these surfactants and their mixtures were also calculated. Structural effects on micellization, adsorption and effectiveness of surface tension reduction are discussed in terms of these parameters. The results show that the FC surfactant and its mixtures with HC surfactants enhance the efficiency in surface tension reduction and adsorption in the mixed monolayer at the aqueous solution/air interface, and also, reduce γ_CMC and the tendency towards micellization.     

Hydrogen elimination in cyclopentadienylnickel compounds as a route to organonickel and organic compounds

Reactions of -, β- and γ-hydrogen elimination in cyclopentadienylnickel compounds formed in the reactions of nickelocene with lithium or magnesium compounds are discussed. Elimination of -hydrogen from CpNiR where R is CH₃, CH₂C(CH₃)₃, CH₂Si(CH₃)₃, CH₂Ph or CH=C(CH₃)₂ leads to the formation of trinickel clusters (CpNi)₃CR′, bis(cyclopentadienyl)(μ-cyclopentadiene)dinickel and (η⁵-cyclopentadienyl)(η³-cyclopenteny)nickel. β-hydrogen and γ-hydrogen elimination in vinylnickel compounds not possesing -hydrogen have been studied. Elimination and transfer of hydrogen forms (η³-allyl)(η⁵-cyclopentadienyl)nickel compounds. The mechanisms of these reactions are discussed.     

Mechanism of oxidative addition of benzonitriles to DI(1,4-bis(diethylphosphino)butane)nickel(0)

A kinetic study of the oxidative addition of RC₆H₄CN (R = H, m-CN, p-CN) to Ni(DEPB)₂ (DEPB = 1,4-bis(diethylphosphino)butane) suggests a template mechanism leading to the fission of one C---CN bond. The reaction products are trans-planar cyano-organonickel(II) complexes, Ni₂(μ-DEPB)₂(RC₆H₄)₂(CN)₂ and Ni(η¹- DEPB)(RC₆H₄)(CN), in equilibrium. through exchange of DEPB.     

Ferroelectric liquid crystals induced by dopants with axially chiral 2,2'-spirobiindan-1,1'-dione cores: diether vs. diester side-chains

A series of axially chiral 5,5'- and 6,6'-dialkanoyloxy-2,2'-spirobiindan-1,1'-dione dopants, (R)-2 and (R)-4a-4c were synthesized in optically pure form and their ferroelectric polarization powers, δ_p, measured in four liquid crystal hosts with isotropic (I)-nematic (N)-smectic A (SmA)-smectic C (SmC) phase sequences. The results show that the sign of polarization P _S induced by (R)-2 and (R)-4a-4c follows the same trend as that previously reported for the 5,5'- and 6,6'-diheptyloxy-2,2'-spirobiindan-1,1'-dione dopants, (R)-1 and (R)-3. The polarization induced by (R)-2 in the host DFT is below detection limits, and the sign of P _S was found to invert as a function of temperature at mole fractions as low as 0.01. On the other hand, the polarization power of the 6,6'-diheptanoyloxy dopant (R)-4b in the host NCB76 is -1449 nC cm^-2, the fourth highest value reported so far, and more than three times the δ_p value of the 5,5'-diheptanoyloxy analogue (R)-2 in that host (+474 nC cm^-2). Results of ²H NMR experiments suggest that (R)-4b exerts stronger local perturbations in NCB76 than (R)-2, and that these perturbations may be chiral in nature.     

Heteroallen-komplexe des molybdänocens

Reactions of the extremely labile molybdenocene olefin complexe Mo(η⁵-C₅H₅)₂[(Z)-C₆H₅CH=CHC₆H₅] with heteroallenes X=C=Y (X=C=Y = CS₂, (p-tolyl)NCN(p-tolyl), (C₆H₅)₂CCO) gives the corresponding heteroallene complexes of molybdenocene Mo(η⁵-C₅H₅)₂(X=C=Y) in high yields. Spectroscopic data clearly indicate a dihapto-coordination of the heteroallenes via the C=X bond (X = O, S, N).     

Modification mechanism of Sn for hydrogenation of p-chloronitrobenzene over PVP-Pd/γ-Al2O3

PVP-Pd (1.5 wt.%)/γ-Al₂O₃ was prepared and used as a catalyst for the hydrogenation of p-chloronitrobenzene (p-CNB) to form p-chloroaniline (p-CAN), so that a serious dehalogenation reaction was happened. However, the catalytic property of this catalyst was remarkably affected by some metal cationic additives. Especially, when Sn⁴⁺ was introduced into the reaction system, the activity of the catalyst was not only promoted, but the dehalogenation reaction was also greatly suppressed. The average rate of hydrogenation increased from 1.28 mol H₂/mol Pd s on PVP-Pd/γ-Al₂O₃ catalyst to 1.96 mol H₂/mol Pd s on the PVP-Pd-Sn⁴⁺/γ-Al₂O₃ catalyst (molar ratio of Pd to Sn = 1:1), and the selectivity for p-CAN increased from 66.8 to 96.6%. The dehalogenation reaction was completely restrained as the molar ratio of Sn⁴⁺ to Pd was up to 5. The great promotion role of Sn⁴⁺ could be owing to the interaction between Sn⁴⁺ and −NO₂ group of the substrate. The combination of Sn⁴⁺ with oxygen in −NO₂ increased the polarity of NO bond. The increase of the polarity of NO benefited the activated dihydrogen to attack the NO bond, and the hydrogenation was accelerated. At the same time, the increase of the polarity of NO bond caused the more lone pair electron of p orbital on chlorine atom to dislocate to phenyl ring, so CCl bond was strengthened and the polarity of CCl was weakened. Furthermore, these were unfavorable for the activated dihydrogen to attack CCl bond and the hydrogenation selectivity was greatly improved.     

Grain boundaries as barrier for oxygen transport in perovskite-type membranes

Perovskite-type membranes of (Ba_0.5Sr_0.5)(Co_0.8Fe_0.2)O_3−δ (BSCF) and (Ba_0.5Sr_0.5)(Fe_0.8Zn_0.2)O_3−δ (BSFZ) were successfully prepared via liquid-phase sintering using BN as sintering aid. The obtained membranes were examined via powder X-ray diffraction pattern (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and oxygen permeation experiments. It has emerged that the use of BN as sintering aid lowers sintering temperatures in order to obtain dense membranes with relative densities in the range of 93–96% as proven by the Archimedes method. It was further shown that the perovskite structure could be maintained after sintering with BN. Additionally, BN was completely removed from the sintered membranes. Investigation of the microstructure revealed that the average grain size of the membranes was influenced by the amount of BN added prior the sintering process. It was found that large amounts of BN effectively lower the average grain size. Oxygen permeation experiments have shown that the lower the average grain size the lower the oxygen permeation performance, particularly in the case of BSCF. Transmission electron microscopy revealed that no evidence for an amorphous layer or any other interfacial phase in the grain boundary is present.