Designing nanosensors based on charged derivatives of gramicidin A

Detection of chemical processes on a single molecule scale is the ultimate goal of sensitive analytical assays. We recently reported the possibility to detect chemical modifications on individual molecules by monitoring a change in the single ion channel conductance of derivatives of gramicidin A (gA) upon reaction with analytes in solution. These peptide-based nanosensors detect reaction-induced changes in the charge of gA derivatives that were engineered to carry specific functional groups near their C-terminus.1 Here, we discuss five key design parameters to optimize the performance of such chemomodulated ion channel sensors. In order to realize an effective sensor that measures changes in charge of groups attached to the C-terminus of a gA pore, the following conditions should be fulfilled: (1) the change in charge should occur as close to the entrance of the pore as possible; (2) the charge before and after reaction should be well-defined within the operational pH range; (3) the ionic strength of the recording buffer should be as low as possible while maintaining a detectable flow of ions through the pore; (4) the applied transmembrane voltage should be as high as possible while maintaining a stable membrane; (5) the lipids in the supporting membrane should either be zwitterionic or charged differently than the derivative of gA. We show that under the condition of high applied transmembrane potential (>100 mV) and low ionic strength of the recording buffer (< or =0.10 M), a change in charge at the entrance of the pore is the dominant requirement to distinguish between two differently charged derivatives of gA; the conductance of the heterodimeric gA pore reported here does not depend on a difference in charge at the exit of the pore. We provide a simple explanation for this asymmetric characteristic based on charge-induced local changes in the concentration of cations near the lipid bilayer membrane. Charge-based ion channel sensors offer tremendous potential for ultrasensitive functional detection since a single chemical modification of each individual sensing element can lead to readily detectable changes in channel conductance.     

Evaluating the charge of nanofiltration membranes

In this study, several methods were used to determine the charge of commercially available nanofiltration membranes, and were compared. First the ion-exchange capacity was determined by titration, this method is able to distinguish between positively and negatively charged functional groups on the membrane. Secondly, measurements of the streaming potential gave a value for the charge density at the exterior membrane surface; the effect of the pH of the solution on the membrane charge was studied. Finally, measurements of the membrane potential allowed to evaluate the total membrane charge density.The results of the three methods were used to compare the membrane charge of nanofiltration membranes mainly in a qualitative way. It is shown that measurements of the membrane potential are preferred for the evaluation of the membrane charge.     

Deposition and wetting characteristics of polyelectrolyte multilayers on plasma-modified porous polyethylene

Hydrophilic and chemically reactive porous media were prepared by adsorbing functional polymers at the surface of sintered polyethylene membranes. Modification of the membrane was accomplished by first exposing the membrane to an oxygen glow discharge gas plasma to introduce an electrostatic charge at the membrane surfaces. Cationic polyelectrolyte polyethylenimine (PEI) was adsorbed from solution to the anionic-charged surface to form an adsorbed monolayer. The adsorption of a second anionic polyelectrolyte onto the PEI layer allows further modification of the membrane surface to form a polyelectrolyte-bilayer complex. The conformation and stability of the adsorbed monolayers and bilayers comprising the modified surface are probed as a function of the polymer structure, charge density, and solubility. Using X-ray photoelectron spectroscopy analysis, we demonstrate that the presence of the polyelectrolyte multilayers drastically increases the density and specificity of the functional groups at the surface, more than what can be achieved through the plasma modification alone. Also, using the wicking rate of deionized, distilled water through the porous membrane to gauge the interfacial energy of the modified surface, we show that the membrane wicking rate can be controlled by varying the chemistry of the adsorbing polyelectrolytes and, to a lesser extent, by adjusting the polarity or ionic strength of the polyelectrolyte solution.     

Polyurea microcapsules: Surface modification and capsule size control

A postmodification method for polyurea microcapsule (PUMC) surfaces using functional polyelectrolytes is reported in this article. Fluorescein isothiocyanate (FITC) was used to probe the chemistry on PUMC surface and label nucleophilic groups on the surface, in particular amines. As well, a fluorescently labeled polyanion containing electrophilic acetoacetate groups was used to covalently react with these nucleophilic groups on the PUMC surfaces. This modification causes charge reversion of the originally cationic PUMC and enables subsequent layer‐by‐layer (LbL) coating using other polyelectrolytes, allowing for covalent or noncovalent modification of the capsule surface. All modification steps were monitored using either laser scanning confocal microscopy or fluorescence microscopy. Optical and fluorescence microscopy of PUMC wall cross‐sections embedded in resin confirmed that the modifications were restricted to the outer surface of PUMCs, offering minimum interference of this modification method with other capsule wall properties. In addition, a simple T‐junction type microfluidic device based on a commercially available MicroTEE was designed to produce narrowdisperse PUMCs. This device was easy to set up and operate and was proved to be an useful tool for making monodisperse emulsions and narrowdisperse MCs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

用流动电位法表征纳滤膜的结构及性能

利用测量流动电位的方法考察了纳滤膜的表面电学性能对纳滤膜的截留性能的影响.首先,采用不同功能层材料制备了复合纳滤(NF)膜,考察功能层的交联时间、单体结构等对表面电性能的影响,研究纳滤膜对不同无机盐的选择截留性能与表面电性能的关系.通过流动电位法测定纳滤膜的表面电学参数,如流动电位(ΔE)、zeta电位(ζ)和表面电荷密度(σd).实验表明,这些电学参数的变化与功能层交联时间和纳滤膜截留率的变化一致,在交联时间为45 s时,3种电学参数的绝对值均最大,而纳滤膜对无机盐的截留率也最大.复合纳滤膜zeta电位的绝对值(|ζ|)按照Na2SO4>MgSO4>MgCl2变化,同截留率的变化相同.带侧基单体交联后得到的纳滤膜的表面电性能参数的绝对值小于不带侧基单体的.因此,流动电位法可用于研究复合纳滤膜的截留机理和功能层结构.     

A dynamic method of measuring surface potential change due to binding of bitter substance at monolayer-coated liquid membrane surface.

A dynamic method of determining the membrane surface potential change due to a binding of a hydrophobic ion has been presented. The surface potential was determined from the time course of membrane potential under zero electric current during a transition between two steady states in a membrane filter impregnated with a phospholipid and 1-octanol. One of the alkaloids, quinine hydrochloride, was used as a hydrophobic electrolyte. Surface charge density and equilibrium constant for binding of quinine ions with ionizable groups of the phospholipids at the membrane surface were determined from the surface potential according to the Poisson-Boltzmann equation.     

静电位阻模型在纳滤膜跨膜电位解析中的应用

采用静电位阻模型对纳滤膜的跨膜电位进行了理论解析, 考察了溶液体积通量密度、原料液浓度、阴阳离子扩散系数比、膜孔半径和膜体积电荷密度对KCl(1-1型电解质)和MgCl2(2-1型电解质)中的纳滤膜跨膜电位的影响. 研究结果表明, 随着通量密度的增大, KCl和MgCl₂的跨膜电位线性程度增强; 两种电解质的跨膜电位均随着原料液浓度和膜孔半径的增大而下降; 在不同的考察范围内, 阴阳离子扩散系数比对1-1型和2-1型电解质的跨膜电位的影响差别较大; KCl的跨膜电位随着膜体积电荷密度的变化关于零点呈现出对称性, 而MgCl₂的跨膜电位零点则出现在膜体积电荷密度为负的条件下.     

Surface modification of phenolphthalein poly(ether sulfone) ultrafiltration membranes by blending with acrylonitrile-based copolymer containing ionic groups for imparting surface electrical properties

Asymmetric ultrafiltration membranes were fabricated from the blends of phenolphthalein polyethersulfone (PES-C) and acrylonitrile copolymers containing charged groups, poly(acrylonitrile-co-acrylamido methylpropane sulfonic acid) (PAN-co-AMPS). From the surface analysis by XPS and ATR-FTIR, it was found that the charged groups tend to accumulate onto the membrane surface. This result indicated that membrane surface modification for imparting surface electrical properties could be carried out by blending charged polymer. Furthermore, with the help of a relatively novel method to measure membrane conduction, the true zeta potentials calculated on the basis of the streaming potential measurements were used to reflect the charge state of membrane surface. In addition, it was noteworthy that, from the profiles of zeta potential versus pH curves and the magnitude of zeta potentials, the determination of zeta potential was dependent not only on the electrical properties of membrane surface but also on its hydrophilicity. At last, based on a relatively elaborate study on the electrostatic interaction between the membrane surface and protein, it was found that these charged membranes could meet different demands of membrane applications, such as resisting protein fouling or protein separation, through adjusting solution pH value.     

A Flexible Method for Covalent Double Functionalization of Graphene Oxide

A method for the double functionalization of graphene oxide (GO) under mild alkaline conditions has been developed. Two functional groups were covalently linked to GO in two steps: the first group was attached by an epoxide ring‐opening reaction and the second, bearing an amine function, was covalently conjugated to benzoquinone attached to the GO. The doubly functionalized GO was characterized by several techniques, confirming the sequential covalent modification of the GO surface with two different functional groups. This method is straightforward and the reaction conditions are mild, allowing preservation of the structure and properties of GO. This strategy could be exploited to prepare multifunctional GO conjugates with potential applications in many fields ranging from materials science to biomedicine.     

Electric field driven changes of a gramicidin containing lipid bilayer supported on a Au(111) surface

Langmuir-Blodgett and Langmuir-Schaeffer methods were employed to deposit a mixed bilayer consisting of 90% of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 10% of gramicidin (GD), a short 15 residue ion channel forming peptide, onto a Au(111) electrode surface. This architecture allowed us to investigate the effect of the electrostatic potential applied to the electrode on the orientation and conformation of DMPC molecules in the bilayer containing the ion channel. The charge density data were determined from chronocoulometry experiments. The electric field and the potential across the membrane were determined through the use of charge density curves. The magnitudes of potentials across the gold-supported biomimetic membrane were comparable to the transmembrane potential acting on a natural membrane. The information regarding the orientation and conformation of DMPC and GD molecules in the bilayer was obtained from photon polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) measurements. The results show that the bilayer is adsorbed, in direct contact with the metal surface, when the potential across the interface is more positive than -0.4 V and is lifted from the gold surface when the potential across the interface is more negative than -0.4 V. This change in the state of the bilayer has a significant impact on the orientation and conformation of the phospholipid and gramicidin molecules. The potential induced changes in the membrane containing peptide were compared to the changes in the structure of the pure DMPC bilayer determined in earlier studies.     

Lipid membrane dipole perturbation and chemoreception as models for selective chemical sensing

The proposition that dipolar and electrostatic modification of the surface dipolar potential of the bilayer lipid membrane with concomitant change of ion flux generates an analytical useful signal is discussed in terms of qualitative theoretical and experimental work. Calculations of membrane permeability with respect to transmembrane potential, configurations of lipid headgroup P-N and carbonyl dipolar vectors and approach proximity of a point dipole representation are compared with current-time profile obtained for interaction of the phosphatidyl choline membrane with various species including a selective lectin-saccharide combination. Preliminary results with a reconstituted plant receptor protein-auxin stimulant system demonstrate that an energy-coupled ion-pumped system also yield a highly selective electrochemical signal.     

Electrochemical and spectroscopic characterization of quinone functionalized exfoliated graphite.

Natural graphite was exfoliated by thermal decomposition of graphite-bisulfate intercalation compound. Oxidative/reductive pre-treatment of exfoliated graphite was subsequently carried out to introduce various functional groups on the graphite surface. The resulting material was covalently modified with redox active quinones. The covalent modification was effected through oxygen containing functional groups formed on the graphite surface. The modified exfoliated graphite was characterized by infra-red (FTIR) and X-ray photoelectron spectroscopy (XPS). Electrochemical characterization of the pressed pellets of the modified graphite showed that the modification occurred at the edge sites. These electrodes were found to be very stable and the surface renewal was simply accomplished by polishing the surface using SiC emery sheets. Application of the benzoquinone modified electrode for the electrocatalysis of ascorbic acid oxidation was demonstrated.     

Electroosmotic flow in template-prepared carbon nanotube membranes.

Carbon nanotube membranes (CNMs) were prepared by doing chemical vapor deposition of carbon within the pores of a microporous alumina template. Electroosmotic flow (EOF) was driven across the CNMs by allowing the membrane to separate two electrolyte solutions and using an electrode in each solution to pass a constant ionic current through the nanotubes. EOF was investigated by measuring the flux of a probe molecule (phenol) across the CNM. The as-synthesized CNMs have anionic surface charge, and EOF is in the direction of cation migration across the membrane. Measurements of the rate of EOF as a function of applied transmembrane current provided the zeta potential. The effect of pH on zeta provided the pK(a) for the surface acidic sites responsible for this anionic charge; the acidic-site density was also determined. An electrochemical derivatization method was used to attach carboxylate groups to the nanotube walls; this enhances the anionic surface charge density, resulting in a corresponding increase in the EOF rate. Electrochemical derivatization was also used to attach cationic ammonium sites to the nanotube walls to yield CNMs that show EOF in the opposite direction of the as-synthesized or carboxylated membranes.     

Modification of the Surfaces of Polymer Films Irradiated by Heavy Ions and Nucleopore Nanofilters by XeF2 Vapors

The effect of xenon difluoride (XeF₂) vapors on the surface properties of the polymer films irradiated by heavy ions and of the nucleopore nanofilters produced from these films is studied. The procedure for modifying nucleopore membranes made of poly(ethylene terephthalate) and polyimide in XeF₂ vapors is developed. The hydrophilicity, electrosurface properties, and selectivity of modified membranes are investigated. It is shown that the water contact angle on the membrane surface decreases as a result of modification, and the extent of its change depends on the duration and temperature of membrane treatment. Electrokinetic measurements did not reveal any changes in the surface charge during the modification of the membranes prepared from poly(ethylene terephthalate), but their ion selectivity increased twofold. It is shown that the hydrodynamic diameter of the pores of modified membranes reversibly decreases with an increase in transmembrane pressure. The dislosed effects are explained by the presence of an elastoplastic gel-layer on the surfaces of the membrane and its pores. The gel-layer accumulates considerable surface and bulk charges and is characterized by the high hydraulic resistance hindering the convective ion transport.     

Blood compatibility and permeability of heparin-modified polysulfone as potential membrane for simultaneous hemodialysis and LDL removal

Heparin was covalently immobilized on PSf membranes to obtain a dialysis membrane with high affinity for LDL. WCA and streaming potential measurements were performed to investigate wettability and surface charge of the membranes. The morphology of the membranes was investigated by SEM. An ELISA was used to measure the adsorption and desorption of LDL on plain and modified PSf. Blood compatibility was studied by measurement of thrombin time, partial thromboplastin time, kallikrein activity and platelet adhesion. It was found that the blood compatibility of the membrane was improved by covalent immobilization of heparin at its surface. However, PSf-Hep membrane showed higher flux recovery after BSA solution filtration, which revealed antifouling property of PSf-Hep membranes.     

Ultrafiltration membranes prepared from crystalline bacterial cell surface layers as model systems for studying the influence of surface properties on protein adsorption

Crystalline bacterial cell surface layers (S-layers) were used for the preparation of the active filtration layer of ultrafiltration membranes (S-layer ultrafiltration membranes; SUMs). Since the S-layer is uniform in its pore size and morphology and its functional groups are aligned in well-defined positions, the SUMs provide ideal model systems for studying protein adsorption and membrane fouling. Due to the presence of surface-located carboxyl groups the standard SUMs have the net negative charge but exhibit basically a hydrophobic character. In order to change the net charge, the charge density and the accessibility of charged groups of the SUMs as well as their hydrophobicity, free carboxyl groups of the S-layer protein were modified with selected low molecular weight nucleophiles under conditions of preserving the crystalline lattice structure. SUMs with 1.6 to 7 charged or functional groups exposed per nm² of the membrane area were used for adsorption experiments. After solutions of differently sized and charged test proteins were filtered, the relative flux losses of distilled particle free water were measured. The results showed that the adsorption capacity of the SUMs increased with the extent of their hydrophobicity. Test proteins showed their own specific adsorption characteristics, which clearly demonstrated the difficulties in determining parameters controlling the membrane fouling. Independent of the net charge of the test proteins and that of the SUMs, the flux loss of SUMs increased with the increased charge density and an improved accessibility of the charged groups on the S-layer surface. No essential differences in the adsorption characteristics were observed between the zwitterionic SUMs of slightly surplus of free carboxyl groups and the standard SUMs of net negative charge.     

Streaming potential measurements as a characterization method for nanofiltration membranes

The streaming potentials of two different nanofiltration membranes were studied with several electrolyte solutions to investigate the influence of salt type and concentration on the zeta potential and kinetic surface charge density of the membranes. The zeta potentials decreased with increasing salt concentration, whereas the kinetic surface charge densities increased. The kinetic surface charge densities could be described by Freundlich isotherms, except in one case, indicating that the membranes had a negligible surface charge. The kinetic surface charge density observed was caused by adsorbed anions. Salt retention measurements showed different mechanisms for salt separation for the two investigated membranes. One membrane showed a salt retention that could be explained by a Donnan exclusion type of separation mechanism, whereas for the other membrane the salt rejection seemed to be a combination of size and Donnan excluion. Comparing the results obtained by the streaming potential measurements with those of the retention measurements, it could be concluded that the membrane with the highest kinetic surface charge density showed the Donnan exclusion type of separation, whereas the membrane with the lower surface charge density showed a separation mechanism that was not totally determined by Donnan exclusion, size effects seemed to play a role as well.     

Electric potential distributions around discrete charges in a dielectric membrane—electrolyte solution system

Within the framework of the linearized Debye-Hückel theory an exact solution of the problem of calculating the electric potential caused by discrete fixed charges located at arbitrary positions with respect to a dielectric membrane-solution interface is presented. It takes into account the existence of an electrolyte solution on both sides of the membrane. Asymmetric ionic conditions are allowed for. For some interesting typical cases of fixed charge locations and electrolyte ionic strengths electric potential distributions were calculated and discussed. It is shown that, if the fixed charges were at or in front of the membrane surface, the characteristic distance of the electric potential decay was comparable to the Debye-Hückel length. At the opposite membrane surface only very small electric potentials can be observed. If, however, the fixed charge was placed below the membrane surface the electric potential in lateral direction and towards the other membrane surface largely increased. This effect was very sensitive to the position of the fixed charge with respect to the membrane surface.     

Effect of solution chemistry on the surface charge of polymeric reverse osmosis and nanofiltration membranes

A streaming potential analyzer has been used to investigate the effect of solution chemistry on the surface charge of four commercial reverse osmosis and nanofiltration membranes. Zeta potentials of these membranes were analyzed for aqueous solutions of various chemical compositions over a pH range of 2 to 9. In the presence of an indifferent electrolyte (NaCl), the isoelectric points of these membranes range from 3.0 to 5.2. The curves of zeta potential versus solution pH for all membranes display a shape characteristic of amphoteric surfaces with acidic and basic functional groups. Results with salts containing divalent ions (CaCl₂, Na₂SO₄, and MgSO₄) indicate that divalent cations more readily adsorb to the membrane surface than divalent anions, especially in the higher pH range. Three sources of humic acid, Suwannee River humic acid, peat humic acid, and Aldrich humic acid, were used to investigate the effect of dissolved natural organic matter on membrane surface charge. Other solution chemistries involved in this investigation include an anionic surfactant (sodium dodecyl sulfate) and a cationic surfactant (dodecyltrimethylammonium bromide). Results show that humic substances and surfactants readily adsorb to the membrane surface and markedly influence the membrane surface charge.     

Surface modification for stability of nano-sized silica colloids

The surfaces of commercial 30-nm colloidal silica particles were modified by reacting with functional silanes. The high specific surface area and reactivity of the particles due to the small size make the process susceptible to irreversible aggregation not found previously with larger particles. This study compares surface charge results from different reaction conditions and characterization methods. Measurements of the zeta potential as a function of pH and gelation kinetics shed light on the mechanism of instability in nano-sized silica suspensions. Experimental results showed that very stable particles can be suspended in a nonaqueous solvent after refluxing of the silica particles, while maintaining the original particles physical properties of size and electrochemical behavior. Extremely stable particles are obtained by aminosilane surface modification. Factors affecting susceptibility of small particles to irreversible aggregation caused by a nonaqueous solvent or a high concentration of a trialkoxysilane, including the large amount of reactive silanol groups on the surface gel layer of the particles, are discussed.