Balance of hydrophobic and electrostatic forces in the pH response of weak polyelectrolyte capsules

A detailed study of the role of solution pH and ionic strength on the swelling behavior of capsules composed of the weak polyelectrolytes poly(4-vinylpyridine) (P4VP) and poly(methacrylic acid) (PMA) with different numbers of layers was carried out. The polyelectrolyte layers were assembled onto silicon oxide particles and multilayer formation was followed by zeta-potential measurements. Hollow capsules were investigated by scanning electron microscopy and atomic force microscopy. The pH-dependent behavior of P4VP/PMA capsules was probed in aqueous media using confocal laser scanning microscopy. All systems exhibited a pronounced swelling at the edges of stability, at pHs of 2 and 8.1. The swelling degree increased when more polymer material was adsorbed. The swollen state can be attributed to uncompensated positive and negative charges within the multilayers, and it is stabilized by counteracting hydrophobic interactions. The swelling was related to the electrostatic interactions by infrared spectroscopy and zeta-potential measurements. The stability of the capsules as well as the swelling degree at a given pH could be tuned, when the ionic strength of the medium was altered.     

Reversible pH‐Dependent Properties of Multilayer Microcapsules Made of Weak Polyelectrolytes

Summary: We investigated microcapsules composed of the weak polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) assembled on calcium carbonate cores. These capsules are stable in the pH range from 2.5 to 11.5, undergoing reversible swelling in the pH interval from 2.7 to 2.6. Capsule swelling occurs at a protonation degree above 90%. The pH‐dependent size variation of PAH/PMA capsules is blocked after crosslinking of the polyelectrolyte layers.

Schematic of the swelling and de‐swelling of the capsules with changing pH.     

Reversible pH-controlled switching of poly(methacrylic acid) grafts for functional biointerfaces

Responsive polymeric brushes of poly(methacrylic acid) (PMAA) were grafted from silicon surfaces using controlled surface-initiated atom-transfer radical polymerization (SI-ATRP). The growth kinetics of PMAA was investigated with respect to the composition of the ATRP medium by grafting the polymer in mixtures of water and methanol with different ratios. The dissociation behavior of the polymer layers was characterized by FTIR titration after incubating the polymer-grafted substrates in PBS buffer solutions with different pH values. PMAA layers show a strong pH-dependent behavior with an effective pK(a) of the bulk polymer brush of 6.5 ± 0.2, which is independent of the polymer brush thickness and methanol content of the ATRP grafting medium. The pH-induced swelling and collapse of the grafted polymer layers were quantified in real time by in situ ellipsometry in liquid environment. Switching between polymer conformations at pH values of 4 and 8 is rapid and reversible, and it is characterized by swelling factors (maximum thickness/minimum thickness) that increase with decreasing the methanol content of the SI-ATRP medium.     

Amphoteric surface hydrogels derived from hydrogen-bonded multilayers: reversible loading of dyes and macromolecules

We used hydrogen-bonded multilayers of poly(N-vinylpyrrolidone) (PVPON) and poly(methacrylic acid) (PMAA) as precursors for producing surface-bound hydrogels and studied their pH-dependent swelling and protein uptake behavior using in situ attenuated total reflection Fourier transform infrared spectroscopy and in situ ellipsometry. The hydrogels were produced by selective chemical cross-linking between PMAA units using carbodiimide chemistry and ethylenediamine (EDA) as a cross-linking reagent, followed by complete removal of PVPON from the film obtained by exposing the film to pH 7.5. As shown by in situ ellipsometry, hydrogels exhibit distinctive polyampholytic swelling as a function of pH, with minimum swelling at pH 4.2-5.7, and increased film thickness at both lower and higher pH values. Film swelling at lower pH values occurs as a result of the presence of amino groups within the hydrogels, which originate from the one-end attachment of the EDA cross-linker to PMAA chains. The pH-switching of hydrogel swelling was fast and reversible. The degree of hydrogel swelling could be also controlled by varying the time allowed for cross-linking. The produced hydrogels were able to absorb large amounts of dyes and proteins of opposite charge reversibly, in response to pH variations. Finally, we demonstrate that proteins included within the hydrogel can easily be replaced with linear polycations. These surface hydrogels hold promise for bioseparation and controlled delivery applications.     

Modular assembly of layer-by-layer capsules with tailored degradation profiles

Herein we report the preparation of layer-by-layer (LbL) assembled, biodegradable, covalently stabilized capsules with tunable degradation properties. Poly(L-glutamic acid) modified with alkyne moieties (PGA(Alk)) was alternately assembled with poly(N-vinyl pyrrolidone) (PVPON) on silica particles via hydrogen-bonding. The films were cross-linked with a bis-azide linker, followed by removal of the sacrificial template and PVPON at physiological pH through hydrogen bond disruption, yielding one-component PGA(Alk) capsules. To control the kinetics and location of capsule degradation, a number of approaches were investigated. First, a degradable bis-azide cross-linker was incorporated into the inherently enzymatically degradable capsules. Second, we assembled low-fouling capsules composed of nondegradable poly(N-vinyl pyrrolidone-ran-propargyl acrylate) (PVPON(Alk)) via hydrogen bonding with poly(methacrylic acid) (PMA) and combined this with the aforementioned system (PGA(Alk)/PVPON) to produce stratified hybrid capsules. The degradation profiles of these stratified capsules can be closely controlled by the number as well as the position of nondegradable barrier layers in the systems. The facile tailoring of the degradation kinetics makes this stratified LbL approach promising for the design of tailored drug-delivery vehicles.     

Colon-specific devices based on methacrylic functionalized Tween monomer networks: Swelling studies and in vitro drug release

Colon-targeted delivery devices based on methacrylic functionalized Tween monomer networks, useful for 5-FU or Ferulic acid site-specific release, were synthesized. The basic design consists of methacrylic functionalized Tween monomer-based networks prepared with or without acrylic acid as co-monomer. The swelling behaviour and loaded drugs release from these gels was studied as a function of pH. The devices showed a strong pH-dependent swelling behaviour, allowing a maximum release at pH 7.4. The acrylic acid introduction increased the polymeric gels pores size, as evidenced by the loading efficiency increase, but also reduced the amount of released drug in basic media compared to analogous network not containing the co-monomer. This behaviour, already found in the matrix swelling, could be attributed to a slower hydrolysis kinetics of the ester bond in functionalized Tween monomers, which implies a reduced ability to absorb water from a basic medium, resulting in a lower capacity to release the loaded drug.Since our device possesses a maximum drug release in the media at pH 7.4, it could be used for colon-targeted drug delivery of both 5-FU and Ferulic acid.     

Novel surface-modification techniques for polymer-based separation media. Stimulus-responsive phenomena based on double polymeric selectors

A pair of polymeric selectors potentially responding to stimulation was introduced onto monosized porous polymer particles to be evaluated as a packing material for HPLC. Possible complexes formed between polyacrylamide (PAAm) and poly(methacrylic acid) (PMAA) were utilized as stimulus responsive polymeric selectors. Uniformly sized base polymer particle was prepared by multi-step swelling and polymerization method, while the introduction of PAAm and PMAA was done by newly invented modification technique. In this technique, a solvent in which both acrylamide (AAm) and methacrylic acid (MAA) monomers are soluble, but PAAm and PMAA are insoluble, was utilized as a modification medium. The polymer particle doubly modified with PAAm and PMAA was utilized as packing material for HPLC and the stimulus responses were evaluated by changing temperature or pH to check change of the slope of a Van't Hoff plot. By using water as a mobile phase, the expected inflection point of the Van't Hoff plot was observed at upper critical solution temperature (UCST) of the polymer complexes and the temperature responsive ability was observed. Moreover, pH responsive ability was studied by using buffer of either pH 4 or 10 as mobile phase. Slope of the plot was changed in buffer of pH 4, but no change of slope was observed in the buffer of pH 10.     

pH-dependent electrochemical behaviour of hydrophilic ampholytic membranes

Ampholytic membranes were synthesized by copolymerizing (2-hydroxyethyl)methacrylate as the hydrophilic component, methacrylic acid and (N,N-diethylaminoethyl)methacrylate as ionogenic components (both ionogenic monomers in amounts 2.5 mol% or 10 mol%), and ethylenedimethacrylate as the crosslinking agent (3,5 or 10 mol%). The effects of pH on the swelling and membrane potentials of the membranes were investigated. The dependence of the membrane potentials on pH is characterized by the position of the isoelectric point and by the slope of the straight part of the dependence. This slope reflects the attained degree of ideality of the membrane. By varying the degree of cross linking and the content of ionogenic components, it is possible to vary the pH-dependent response of the membranes.     

Assessment of polyelectrolyte coating stability under dynamic buffer conditions in CE

Dynamic buffer conditions are present in many electrophoretically driven separations. Polyelectrolyte multilayer coatings have been employed in CE because of their chemical and physical stability as well as their ease of application. The goal of this study is to measure the effect of dynamic changes in buffer pH on flow using a real-time method for measuring EOF. Polyelectrolyte multilayers (PEMs) were composed of pairs of strong or completely ionized polyelectrolytes including poly(diallyldimethylammonium) chloride and poly(styrene sulfonate) and weak or ionizable polyelectrolytes including poly(allylamine) and poly(methacrylic acid). Polyelectrolyte multilayers of varying thicknesses (3, 4, 7, 8, 15, or 16 layers) were also studied. While the magnitude of the EOF was monitored every 2 s, the buffer pH was exchanged from a relatively basic pH (7.1) to increasingly acidic pHs (6.6, 6.1, 5.5, and 5.1). Strong polyelectrolytes responded minimally to changes in buffer pH (<1%), whereas substantial (>10%) and sometimes irreversible changes were measured with weak polyelectrolytes. Thicker coatings resulted in a similar magnitude of response but were more likely to degrade in response to buffer pH changes. The most stable coatings were formed from thinner layers of strong polyelectrolytes.     

Peculiar swelling properties of PVC films grafted with acrylic and methacrylic acids

It was found that PVC films grafted with methacrylic acid do not swell in either water or methanol, two solvents of poly(methacrylic acid), even for high grafting ratios. The swelling of these films was examined in mixtures of methylene chloride with methanol and curves of different shapes were obtained depending on the grafting ratio. PVC films grafted with acrylic acid readily swell in both water and methanol but they remain hard in the swollen state. The equilibrium swelling increases with swelling temperature but this process is not reversible; films swollen at high temperature keep a high degree of swelling even when the system is cooled.     

Timolol maleate release from pH-sensible poly(2-hydroxyethyl methacrylate-co-methacrylic acid) hydrogels

Multifunctional polymeric materials were obtained from poly(methacrylic acid-co-2-hydroxyethyl methacrylate), to be used as a raw material in the manufacture of contact lens and as drug delivery systems. Poly(methacrylic acid-co-2-hydroxyethyl methacrylate) was prepared by free-radical polymerization in aqueous solution at 60 °C using potassium persulfate (KPS) as initiator and N,N^′-methylenebisacrylamide (BIS) as cross-linker agent. The dynamic and equilibrium swelling properties of dry glassy poly(methacrylic acid-co-2-hydroxyethyl methacrylate) polymeric networks were studied as a function of pH and methacrylic acid (MAA) content. The water content increase as MAA content and pH increase. Timolol maleate delivery from poly(MAA) and poly(2-hydroxyethyl methacrylate) (HEMA) homopolymers was studied and the results show a Fickian diffusion behavior.     

Glucose-sensitive inverse opal hydrogels: analysis of optical diffraction response

A glucose-sensitive inverse opal hydrogel was synthesized through photopolymerization of 2-hydroxyethyl methacrylate and 3-acrylamidophenylboronic acid within the interstitial space of a dried poly(styrene) colloidal crystal template, followed by template removal. Charged complex formation between the phenylboronic acid functional group and the 1,2-cis-diol glucose resulted in reversible swelling of the inverse opal hydrogel, which was observed through shifts in the optical diffraction wavelength. The hydrogel was sensitive to glucose at physiological concentrations and ionic strength. The effects of phenylboronic acid concentration, ionic strength, and buffer pH on the equilibrium hydrogel swelling were also studied. The kinetics of hydrogel swelling was also examined, and it was found that the rate of diffraction shift matched well with diffusion-limited kinetics. Additionally, the diffraction response was compared with simulations using the scalar wave approximation and transfer matrix method.     

Semi-batch control over functional group distributions in thermoresponsive microgels

Thermosensitive poly(N-isopropylacrylamide-co-methacrylic acid) (poly(NIPAM-co-MAA)) microgels were prepared via semi-batch free radical copolymerization in which the functional monomer (methacrylic acid) was continuously fed into the reaction vessel at various speeds. Microgels with the same bulk MAA contents (and thus the same overall compositions) but different radial functional group distributions were produced, with batch copolymerizations resulting in core-localized functional groups, fast-feed semi-batch copolymerizations resulting in near-uniform functional group distributions, and slow-feed semi-batch copolymerizations resulting in shell-localized functional groups. Functional group distributions in the microgels were probed using titration analysis, electrophoresis, and transmission electron microscopy. The induced functional group distributions have particularly significant impacts on the pH-induced swelling and cationic drug binding behavior of the microgels; slower monomer feeds result in increased pH-induced swelling but lower drug binding. This work suggests that continuous semi-batch feed regimes can be used to synthesize thermoresponsive microgels with well-defined internal morphologies if an understanding of the relative copolymerization kinetics of each comonomer relative to NIPAM is achieved.     

Synthesis,characterization and evaluation of semi‐IPN hydrogels consisted of poly(methacrylic acid) and guar gum for colon‐specific drug delivery

The semi‐IPN hydrogels consisting of poly(methacrylic acid) and guar gum (GG) are prepared at room temperature using water as solvent. 5‐aminosalicylic acid (5‐ASA) is entrapped in the hydrogel in the synthesis of hydrogel and all entrapment efficiencies are found above 85%. The hydrogel shows excellent pH‐sensitivity. It exhibited minimum swelling in an acidic pH medium through the formation of a complex hydrogen‐bonded structure and maximal swelling due to the electrostatic repulsion due to the ionization of the carboxylic groups in pH 7.4 medium. The degradation in vitro shows that the degree of degradation (R%) depended on the concentration of cross‐linking agent and content of GG. The hydrogel shows a minimum release of 5‐ASA due to the complex hydrogen bonded structure of the hydrogels in the medium of pH 2.2. The enzymatic degradation of hydrogels by cecal bacteria can accelerate the release of 5‐ASA entrapped in the hydrogel in pH 7.4 medium. Copyright © 2007 John Wiley & Sons, Ltd.     

Amphiphilic conetworks. IV. Poly(methacrylic acid)‐l‐polyisobutylene and poly(acrylic acid)‐l‐polyisobutylene based hydrogels prepared by two‐step polymer procedure. New pH responsive conetworks

This article describes the synthesis and characterization of new amphiphilic polymer conetworks containing hydrophilic poly(methacrylic acid) (PMAA) or poly(acrylic acid) (PAA) and hydrophobic polyisobutylene (PIB) chains. These conetworks were prepared by a two‐step polymer synthesis. In the first step, a cationic copolymer of isobutylene (IB) and 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate (IDI) was prepared. The isocyanate groups of the IB–IDI random copolymer were subsequently transformed in situ to methacrylate (MA) groups in reaction with 2‐hydroxyethyl methacrylate (HEMA). In the second step, the resulting MA‐multifunctional PIB‐based crosslinker, PIB(MA)_n, with an average functionality of approximately four methacrylic groups per chain, was copolymerized with methacrylic acid (MAA) or acrylic acid (AA) by radical mechanism in tetrahydrofuran giving rise to amphiphilic conetworks containing 31–79 mol % of MAA or 26–36 mol % of AA. The synthesized conetworks were characterized with solid‐state ¹³C‐NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proven by swelling in both aqueous media with low and high pH and n‐heptane. The effect of varying pH on the swelling behavior of the synthesized conetworks is presented. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1284–1291, 2009     

Superswelling of Hydrogels Based on the Copolymer of Acrylamide and Methacrylic Acid

Weakly crosslinked hydrogels of copolymers of acrylamide and methacrylic acid are synthesized by radical polymerization in aqueous solution in a wide range of comonomer ratios. It is found that gels containing 20–40 mol % methacrylic acid are characterized by superswelling that exceeds the degree of swelling of homopolymer hydrogels by tens of times. The observed degree of swelling reaches 830, corresponding to an almost completely stretched conformation of subchains between network junctions. For dried hydrogel samples, the equilibrium degree of swelling is also maximal in the mentioned composition range; however, its maximum value is lower than the equilibrium degree of swelling for the initial samples. The possible reason behind the superswelling of hydrogels containing 20–40% units of methacrylic acid is an increase in ionization of network subchains. This hypothesis is proved by an increased sensibility of hydrogels of this composition to a change in the pH of a medium and the lowest values of the effective acidity constant determined by potentiometric titration for methacrylic acid units. The values of partial heat capacity of a gel polymer network are determined by calorimetry. These values are significantly higher than the heat capacities typical of vinyl polymers. This is evidence that the hydrophobic type of hydration predominates in the copolymers of acrylamide and methacrylic acid. The partial heat capacity reaches its maximum within the copolymer composition range corresponding to superswelling.     

快速pH响应丝胶/聚甲基丙烯酸互穿网络水凝胶的合成及表征

采用同步互穿网络方法制备丝胶蛋白(SS)/聚甲基丙烯酸(PMAA)为组分的互穿网络(IPN)水凝胶. 研究了互穿网络水凝胶对介质pH的刺激响应性能. 结果表明, IPN水凝胶具有强烈的pH刺激响应性能. 在pH=9.2的缓冲溶液中, -COOH解离成 -COO^-, 渗透压与网络之间的静电排斥作用导致IPN的溶胀度增大; 当pH减小时, 溶胀度随之减小. IPN水凝胶具有快速退溶胀速率及可逆溶胀-收缩性能.     

Swelling properties of pH‐responsive hydrophobically modified hydrogels of poly(methacrylic acid‐co‐diallylammonium salt) in aqueous solution

Using diallylmethyl alkyl ammonium salts (CCX) (X is alkyl's chain length, represents 12, 14, 16, and 18, respectively) as a comonomer of methacrylic (MAA), hydrophobically modified hydrogels of poly diallylmethyl alkyl ammonium salts‐methacrylic acid (PCCX‐MAA) were prepared by free radical copolymerization in aqueous solution. The synthetic conditions, such as dosage of cross‐linking agent, reaction concentration and length of alkyl chain were studied in detail. Results indicated that the swelling degree of hydrogels was decreased with dosage of cross‐linking agent, or monomer concentration increased at different pH. Incorporation of the different length of alkyl chain hydrophobic CCX units on PMAA chains by random distribution can change reswelling kinetics. The required time for reaching equilibrium swelling state was longest for PCC16‐MAA. Copyright © 2011 John Wiley & Sons, Ltd.     

Heterostructured magnetic nanotubes

Heterostructured magnetic tubes with submicrometer dimensions were assembled by the layer-by-layer deposition of polyelectrolytes and nanoparticles in the pores of track-etched polycarbonate membranes. Multilayers composed of poly(allylamine hydrochloride) and poly(styrene sulfonate) assembled at high pH (pH > 9.0) were first assembled into the pores of track-etched polycarbonate membranes, and then multilayers of magnetite (Fe3O4) nanoparticles and PAH were deposited. Transmission electron microscopy (TEM) confirmed the formation of multilayer nanotubes with an inner shell of magnetite nanoparticles. These tubes exhibited superparamagnetic characteristics at room temperature (300 K) as determined by a SQUID magnetometer. The surface of the magnetic nanotubes could be further functionalized by adsorbing poly(ethylene oxide)-b-poly(methacrylic acid) block copolymers. The separation and release behavior of low molecular weight anionic molecules (i.e., ibuprofen, rose bengal, and acid red 8) by/from the multilayer nanotubes were studied because these tubes could potentially be used as separation or targeted delivery vehicles. The magnetic tubes could be successfully used to separate (or remove) a high concentration of dye molecules (i.e., rose bengal) from solution by activating the nanotubes in acidic solution. The release of the anionic molecules in physiologically relevant buffer solution showed that whereas bulky molecules (e.g., rose bengal) release slowly, small molecules (i.e., ibuprofen) release rapidly from the multilayers. The combination of the template method and layer-by-layer deposition of polyelectrolytes and nanoparticles provides a versatile means to create functional nanotubes with heterostructures that can be used for separation as well as targeted delivery.     

Nanoparticle modification by weak polyelectrolytes for pH-sensitive pickering emulsions

The affinity of weak polyelectrolyte coated oxide particles to the oil-water interface can be controlled by the degree of dissociation and the thickness of the weak polyelectrolyte layer. Thereby the oil in water (o/w) emulsification ability of the particles can be enabled. We selected the weak polyacid poly(methacrylic acid sodium salt) and the weak polybase poly(allylamine hydrochloride) for the surface modification of oppositely charged alumina and silica colloids, respectively. The isoelectric point and the pH range of colloidal stability of both particle-polyelectrolyte composites depend on the thickness of the weak polyelectrolyte layer. The pH-dependent wettability of a weak polyelectrolyte-coated oxide surface is characterized by contact angle measurements. The o/w emulsification properties of both particles for the nonpolar oil dodecane and the more polar oil diethylphthalate are investigated by measurements of the droplet size distributions. Highly stable emulsions can be obtained when the degree of dissociation of the weak polyelectrolyte is below 80%. Here the average droplet size depends on the degree of dissociation, and a minimum can be found when 15 to 45% of the monomer units are dissociated. The thickness of the adsorbed polyelectrolyte layer strongly influences the droplet size of dodecane/water emulsion droplets but has a less pronounced impact on the diethylphthalate/water droplets. We explain the dependency of the droplet size on the emulsion pH value and the polyelectrolyte coating thickness with arguments based on the particle-wetting properties, the particle aggregation state, and the oil phase polarity. Cryo-SEM visualization shows that the regularity of the densely packed particles on the oil-water interface correlates with the degree of dissociation of the corresponding polyelectrolyte.