Synthesis and characterization of the SO(2)N(3)(-), (SO(2))(2)N(3)(-), and SO(3)N(3)(-) anions

SO(2) solutions of azide anions are bright yellow, and their Raman spectra indicate the presence of covalently bound azide. Removal of the solvent at -64 degrees C from CsN(3) or N(CH(3))(4)N(3) solutions produces yellow (SO(2))(2)N(3)(-) salts. Above -64 degrees C, these salts lose 1 mol of SO(2), resulting in white SO(2)N(3)(-) salts that are marginally stable at room temperature and thermally decompose to the corresponding azides and SO(2). These anions were characterized by vibrational and (14)N NMR spectroscopy and theoretical calculations. Slow loss of the solvent by diffusion through the walls of a sealed Teflon tube containing a sample of CsSO(2)N(3) in SO(2) resulted in white and yellowish single crystals that were identified by X-ray diffraction as CsSO(2)N(3).CsSO(3)N(3) with a = 9.542(2) A, b = 6.2189(14) A, c = 10.342(2) A, and beta = 114.958(4) degrees in the monoclinic space group P2(1)/m, Z = 2, and Cs(2)S(2)O(5).Cs(2)S(2)O(7).SO(2), respectively. Pure CsSO(3)N(3) was also prepared and characterized by vibrational spectroscopy. The S-N bond in SO(2)N(3)(-) is much weaker than that in SO(3)N(3)(-), resulting in decreased thermal stability, an increase in the S-N bond distance by 0.23 A, and an increased tendency to undergo rotational disorder. This marked difference is due to SO(3) being a much stronger Lewis acid (pF(-) value of 7.83) than SO(2) (pF(-) value of 3.99), thus forming a stronger S-N bond with the Lewis base N(3)(-). The geometry of the free gaseous SO(2)N(3)(-) anion was calculated at the RHF, MP2, B3LYP, and CCSD(T) levels. The results show that only the correlated methods correctly reproduce the experimentally observed orientation of the SO(2) group.     

Synthesis and structure of the cluster Fe2Mo2(μ3-Se)(μ3-AsMe)(μ3-Co)(μ-Co)(Co)5(η5-Cp)2

The reaction of (Et₄N)₂[Fe₃(μ₃-Se)(Co)₉] with MeAsI₂ afforded the [Fe₃(μ₃-Se)(μ₃-AsMe)(Co)₉] cluster, which was characterized by¹H NMR and IR spectroscopy and elemental analysis. The reaction of the resulting compound with the dimeric, complex [η⁵-CpMo(CO)₃#x005D;₂ inm-xylene upon refluxing gave the heterometallic cluster Fe₂Mo₂(μ₃-Se)(μ₃-AsMe)(μ₃-Co)(μ-Co)(Co)₅(η⁵-Cp)₂, whose structure was established by X-ray diffraction analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 996–998, May, 1999.     

A novel copper cobalt inorganometallic cluster. Synthesis,structure and bonding analysis of Cu(3)[mu(2)-(CCHCo(2)(CO)(6))](3)

The reaction of the organometallic carboxylic acid HOOCCCHCo(2)(CO)(6) with copper(II) methoxide leads to a new inorganometallic cluster; Cu(3)[mu(2)-(CCHCo(2)(CO)(6))](3). This cluster has a triangular core of copper(I) centers surrounded by three CCHCo(2)(CO)(6) fragments. The structure of the cluster has short Cu-Cu and Cu-Co distances (average 2.500 and 2.540 A, respectively). DFT calculations provide a rationalization of the peculiar bonding in this cluster.     

Synthesis and characterization of a new three-dimensional lanthanide carboxyphosphonate: Ln(4)(H(2)O)(7)[O(2)C-C(5)H(10)N-CH(2)(-)PO(3)](4)(H(2)O)(5)

The first open-framework lanthanide carboxyphosphonate has been obtained under hydrothermal conditions. The three-dimensional structure of MIL-84(Pr) (MIL = Material Institut Lavoisier) or Pr(4)(H(2)O)(7)[O(2)C-C(5)H(10)N-CH(2)(-)PO(3)](4)(H(2)O)(5) has been solved from X-ray diffraction single-crystal data (a = 23.481(1) A, b = 10.159(1) A, c = 23.006(1) A, beta = 105.63(1) degrees, V = 5284.6(6) A(3), space group Cc (No. 9)). Its framework is built up from chains of edged-sharing eight or nine-coordinated monocapped square antiprism polyhedra and carboxyphosphonate anions, creating a three-dimensional structure with small pores filled with water molecules. The thermal behavior of MIL-84(Pr) has been investigated using TGA and X-ray thermodiffractometry and indicates that MIL-84(Pr) is stable up to 523 K with a reversible hydration-dehydration process. The optical study of its yttrium analogue doped at 3.4% with europium (MIL-84(Y,Eu)) reveals a significant red-orange emission under UV radiation.     

Synthesis and characterization of two novel lanthanide coordination polymers with an open framework based on an unprecedented [Ln(7)(micro(3)-OH)(8)](13+) cluster

Two novel heptanuclear lanthanide clusters of the dicubane-like type [Ln(7)(micro(3)-OH)(8)](13+) (Ln = Ho (1), Yb (2)) were obtained via hydrothermal reaction, and as building blocks, they were formally assembled into porous three-dimensional networks through the linkage of 1,4-naphthalenedicarboxylate (1,4-NDA), forming first examples of porous lanthanide polymers with 1,4-NDA, [Ln(7)(micro(3)-OH)(8)(1,4-NDA)(6)(OH)(0.5)(Ac)(0.5)(H(2)O)(7)].4H(2)O (Ln = Ho, Yb). The coordinating water molecules and lattice water molecules are enclathrated in the cavities.     

Synthesis and characterization of Rh3(μ-PPh2)3(CO)3(PPh3)2: a novel triangular rhodium cluster

Thermal decomposition of RhH(CO)(PPh₃)₃ (Ph = phenyl) in nonane at 120°C yielded a green solid in high yield. The complex was established as Rh₃(μ-PPh₂)₃(CO)₃(PPh₃)₂, (I), X-ray crystallography. I was found to be coordinately unsaturated in the solid state and in solution.     

Aluminium complexes with thio-phosphorus ligands: syntheses and characterisations of [Al(2)(CyPS(3))(2)(CyPHS(2))(2)] and [Al(S(2)PPh(2))(3)

The novel aluminium complexes [Al(2)(CyPS(3))(2)(CyPHS(2))(2)] and [Al(S(2)PPh(2))(3)] have been prepared as potential models for alumino-thiophosphonate based materials; [Al(2)(CyPS(3))(2)(CyPHS(2))(2)] is the first example of a primary dithiophosphinate to be characterised in the solid state.     

Solvation-induced cluster anion core switching from NNO2(-)(N2O)n-1 to O(-)(N2O)n

We report a photoelectron imaging study of the [O(N(2)O)(n)](-), 0or=4 (and up to at least n=9) signatures of an O(-) core are predominantly observed. Photofragmentation studies at 355 nm support these results.     

Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7): a structure with tunable density of Na(+) vacancies

A series of samples with the composition Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7) (0 < x < or = 1) was investigated and a hexagonal structure with unusually large range of homogeneity (at least from x = 0.01 to 0.95) was revealed. The hexagonal phase consists of [Al(2)B(2)O(7)](infinity)(2)(-) lamellae stacked along the c axis, as in CaAl(2)B(2)O(7) and Na(2)Al(2)B(2)O(7). Nevertheless, the configuration and stacking sequence of the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae are different in these three structures. In the hexagonal structure of Ca(1)(-)(x)()Na(2)(x)()Al(2)B(2)O(7), Ca and half Na cations (Na1) statistically occupy the same crystallographic site which is located between the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae, the other half Na cations (Na2) distribute in the planes bisecting the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae. Depending on the composition, the site occupation factor of Na2 site can vary in the same range as x, leading to a tunable density of Na(+) vacancies in the structure. The AlO(4) tetrahedra and BO(3) triangles in the structure tilt in appropriate ways to improve the bond valence sum of Na2 cations which are not sufficiently bonded to the anions.     

Synthesis of an unprecedented bicapped adamantoid [Cu6(mu2-I)(mu3-I)4(mu4-I)(m-tolyl3P)4(CH3CN)2] cluster

The reaction of copper(I) iodide with tri-m-tolylphosphine (m-tolyl(3)P) in acetonitrile yielded the cluster [Cu(6)(mu2-I)(mu3-I)4(mu4-I)(m-tolyl(3)P)4(CH(3)CN)2] (1), with a bicapped adamantoid geometry. In this compound, four Cu atoms are coordinated to four terminally bonded m-tolyl(3)P ligands, two Cu atoms are bonded to two CH(3)CN ligands, and iodide ligands have mu2-I, mu3-I, and mu4-I bonding modes. This compound has four CuI(3)P and two CuI(3)N cores, and geometry around each Cu center is distorted tetrahedral.The polarizable iodide ligand and the position of the methyl group in the phenyl ring attached to the P atom appear to have played the pivotal role in the formation of monomeric bicapped adamantoid geometry, which is unique in copper chemistry.     

Small gas-phase dianions of Zn3O(4)(2-), Zn4O(5)(2-), CuZn2O(4)(2-), Si2GeO(6)(2-), Ti2O(5)(2-) and Ti3O(7)(2-)

We have searched for new species of small oxygen-containing gas-phase dianions produced in a secondary ion mass spectrometer by Cs+ ion bombardment of solid samples with simultaneous exposure of their surfaces to O2 gas. The targets were a pure zinc metal foil, a copper-contaminated zinc-based coin, two silicon-germanium samples (Si(1-x)Ge(x)(with x= 6.5% or 27%)) and a piece of titanium metal. The novel dianions Zn3O(4)(2-), Zn4O(5)(2-), CuZn2O(4)(2-), Si2GeO(6)(2-), Ti2O(5)(2-) and Ti3O(7)(2-) have been observed at half-integer m/z values in the negative ion mass spectra. The heptamer dianions Zn3O(4)(2-) and Ti2O(5)(2-) have been unambiguously identified by their isotopic abundances. Their flight times through the mass spectrometer are approximately 20 micros and approximately 17 micros, respectively. The geometrical structures of the two heptamer dianions Ti2O(5)(2-), and Zn3O(4)(2-) are investigated using ab initio methods, and the identified isomers are compared to those of the novel Ge2O(5)(2-) and the known Si2O(5)(2-) and Be3O(4)(2-) dianions.     

Structure and bonding in cyclic isomers of B2AlH(n)(m) (n = 3-6, m = -2 to +1): a comparative study with B3H(n)(m), BAl2H(n)(m) and Al3H(n)(m)

The structure, bonding and energetics of B(2)AlH(n)(m) (n = 3-6, m = -2 to +1) are compared with corresponding homocyclic boron, aluminum analogues and BAl(2)H(n)(m) using density functional theory (DFT). Divalent to hexacoordinated boron and aluminum atoms are found in these species. The geometrical and bonding pattern in B(2)AlH(4)(-) is similar to that for B(2)SiH(4). Species with lone pairs on the divalent boron and aluminum atoms are found to be minima on the potential energy surface of B(2)AlH(3)(2-). A dramatic structural diversity is observed in going from B(3)H(n)(m) to B(2)AlH(n)(m), BAl(2)H(n)(m) and Al(3)H(n)(m) and this is attributable to the preference of lower coordination on aluminum, higher coordination on boron and the higher multicenter bonding capability of boron. The most stable structures of B(3)H(6)(+), B(2)AlH(5) and BAl(2)H(4)(-) and the trihydrogen bridged structure of Al(3)H(3)(2-) show an isostructural relationship, indicating the isolobal analogy between trivalent boron and divalent aluminum anion.     

Al(6)(2-) - fusion of two aromatic Al(3)(-) units. A combined photoelectron spectroscopy and ab initio study of M(+)[Al(6)(2-)] (M = Li,Na, K,Cu, and Au)

Photoelectron spectroscopy is combined with ab initio calculations to elucidate the structure and chemical bonding of a series of MAl(6)(-) (M = Li, Na, K, Cu, and Au) bimetallic clusters. Well-resolved photoelectron spectra were obtained for MAl(6)(-) (M = Li, Na, Cu, and Au) at several photon energies. The ab initio calculations showed that all of the MAl(6)(-) clusters can be viewed as an M(+) cation interacting with an Al(6)(2-) dianion. Al(6)(2-) was found to possess an O(h) ground-state structure, and all of the MAl(6)(-) clusters possess a C(3v) ground-state structure derived from the O(h) Al(6)(2-). Careful comparison between the photoelectron spectral features and the ab initio one-electron detachment energies allows us to establish firmly the C(3v)ground-state structures for the MAl(6)(-) clusters. A detailed molecular orbital (MO) analysis is conducted for Al(6)(2-) and compared with Al(3)(-). It was shown that Al(6)(2-) can be considered as the fusion of two Al(3)(-) units. We further found that the preferred occupation of those MOs derived from the sums of the empty 2e' MOs of Al(3)(-), rather than those derived from the differences between the occupied 2a(1)' and 2a(2)' ' MOs of Al(3)(-), provides the key bonding interactions for the fusion of the two Al(3)(-) into Al(6)(2-). Because there are only four bonding MOs (one pi and three sigma MOs), an analysis of resonance structures was performed for the O(h)Al(6)(2-). It is shown that every face of the Al(6)(2-) octahedron still possesses both pi- and sigma-aromaticity, analogous to Al(3)(-), and that in fact Al(6)(2-) can be viewed to possess three-dimensional pi- and sigma-aromaticity with a large resonance stabilization.     

Substitution reactions with [ReBr(2)(CO)(2)(NCCH(3))(2)](-): a convenient route to complexes with the cis-[Re(CO)(2)](+) core

Water- and air-stable complexes comprising the cis-[Re(CO)(2)](+) core can be synthesized from the (Et(4)N)[ReBr(2)(NCCH(3))(2)(CO)(2)] precursor . Complex showed distinctly different chemical and electronic behaviour compared to [ReBr(3)(CO)(3)](2-). Substituting the two bromides in with imidazole-like ligands or alpha,alpha'-diimines gave new complexes with potential applications in bioinorganic chemistry and photochemistry. The two acetonitrile ligands are very stably bound and could not be replaced. Under CO pressure, the uncommon complex mer-[ReBr(NCCH(3))(2)(CO)(3)] was formed from . The reaction of with the tetradentate ligand bis(2-pyridylmethyl)glycine (BPG) finally induced a four fold substitution at the metal center to form a [Re(CO)(2)(L(4))](+)-type complex.