重离子束辐照育种研究进展及发展趋势

相对于低能离子束生物学, 中能重离子束对植物的诱变效应介绍较少。 从机理上综述了中能重离子束辐照诱变技术的优点, 简要介绍了粮食作物、 经济作物及模式植物的重离子束辐照育种的现状, 最后从转基因、 分子辅助标记及航天育种等方面对重离子束辐照育种的发展趋势进行了展望。 In recent years, the intermediate energy heavy ion biology has been concerned rarely comparing to that of the low energy ions. In this paper, we summarized the advantage of a new mutation breeding method mediated by intermediate energy heavy ion irradiations. Meanwhile, the present state of this mutation technique in applications of the breeding in grain crops, cash crops and model plants were introduced. And the preview of the heavy ion irradiations in gene transfer, molecular marker assisted selection and spaceflight mutation breeding operations were also presented.     

聚合物材料的快重离子辐照效应

简要介绍了快重离子辐照损伤的特点,通过与低电离辐射粒子辐照在聚合物材料中产生的效应的类比论述了快重离子辐照在聚合物材料中产生的效应及其研究现状 ,并结合快重离子辐照效应的应用展望了该领域未来的发展.The irradiation effects in polymers induced by swift heavy ions were reviewed in comparison with that induced by low ionization particles based on the characteristics of swift heavy ion irradiations. It is shown that bond breaking and cross linking, gas releasing, amorphization and carbonization of polymers depend strongly on the electronic energy loss. Besides special effects such as alkynes production, can be induced under swift heavy ion irradiation. The perspectives...     

重离子辐射植物的诱变效应研究及应用

重离子生物技术已引起人们的广泛关注, 植物育种是重离子生物技术研究和应用的热点之一。 简要介绍了重离子的基本特征和在育种应用中的优势, 综述了重离子辐射对植物分子、 细胞、 个体3个水平的诱变效应研究及重离子辐射育种取得的进展。 Heavy ion biotechnology has received much attention since the mid 1980s, when the first mutagenic effect of heavy ion beams was found in rice. Since then, plant breeding is one of the focuses in heavy ion biotechnology. In this paper we outlined the recent developments in plant breeding by heavy ion beams. We introduced briefly the essential characteristics and superiority of heavy ion beams applied in plant breeding, and reviewed further the mutagenic research in three levels(e.g., molecular, cell and individual) of plants. At last, we summarized artificial mutants obtained in plants irradiated by heavy ion beams.     

中能重离子微束辐照装置的研制

微束辐照装置是将辐照样品的束斑缩小到微米量级, 能够对辐照粒子进行准确定位和精确计数的实验平台, 是开展辐照材料学、辐照生物学、辐照生物医学以及微加工的有力工具. 中国科学院近代物理研究所(IMP)正在研制中能重离子微束辐照装置. 该装置以兰州重离子加速器(HIRFL)系统提供的中能和低能重离子束流为基础, 采用磁聚焦方式形成微米束. 束运线上两台铅垂方向的偏转磁铁辅以四极磁铁构成对称消色差系统, 将束流导向地下室, 再用高梯度的三组合四极透镜强聚焦形成微米束斑, 在真空中或大气中辐照样品. 它将成为国内首台能够提供从低能(10MeV/u)到中能(100MeV/u)的重离子微束的公共实验平台, 用于定位、定量照射靶物质(生物细胞、组织或其它非生物材料等), 有助于深入揭示重离子与物质相互作用的本质, 也为探索重离子辐照效应的应用提供新的手段.     

重离子辐照SiO2的光致发光

基于荷能离子与固体相互作用特点,提出了一种新的制备光致发光材料的方法-- 高能重离子辐照. 用这种方法研究了SiO2薄膜的光致发光特性,发现高能84K r和40Ar离子辐照可在注碳SiO2薄膜样品中产生强的蓝-紫光发射带,掺杂碳增强了辐照样品的发光特性.     

快重离子辐照非晶态合金引起的塑性形变研究进展

简单介绍了国内外关于快重离子低温辐照非晶态合金引起的各向异性的塑性形变研究新进展，并对该领域今后的研究方向作了展望. Present status in study of fast heavy ion beam induced plastic deformation in amorphous alloys is briefly reviewed. Further research trend and relevant problems are also discussed.     

中能重离子在铁氧体材料中的辐照效应

本文系统地评述了中能重离子在铁氧体材料小辐照效应的国际国内研究概况．并指出了利用兰州重离子研究装置（ＨＩＲＦＬ）可进一步开展的工作.This paper gives a systemic review on the recent progress in the study of irradiation effects in ferrite induced by energetic heavy ions, and also gives a suggestion thatsome experiments in this field can be carried out further by Heavy Ion Reseach Facility ofLanzhou(HIRFL ).     

钨辐射损伤随辐照剂量变化的重离子辐照模拟研究

采用重离子辐照模拟方法和正电子湮没寿命测量技术研究了钨辐射损伤随辐照剂量的变化。20,60和90dpa（每个原子的位移次数）辐照损伤水平的实验结果表明,辐照在钨中产生单空位、双空位、位错和空位团等缺陷;随辐照剂量的增大,单空位、双空位和位错浓度增加,空位团的尺度和浓度都随之增大。Radiation damage in W has been studied as a function of irradiation dose by heavy ion simulation and positron annihilation lifetime measurement. The experimental results of 20, 60 and 90 dpa irradiations illustrate that the mono-and di-vacancies, dislocations and vacancy clusters are produced by the irradiation. The concentrations of the mono-and di-vacancies and dislocations and both the concentration and size of the vacancy clusters or voids all increase with the increasing of the irradiation dose.     

中能重离子微束辐照装置的研制

微束辐照装置是将辐照样品的束斑缩小到微米量级,能够对辐照粒子进行准确定位和精确计数的实验平台,是开展辐照材料学、辐照生物学、辐照生物医学以及微加工的有力工具.中国科学院近代物理研究所(IMP)正在研制中能重离子微柬辐照装置.该装置以兰州重离子加速器(HIRFL)系统提供的中能和低能重离子束流为基础,采用磁聚焦方式形成微米束.束运线上两台铅垂方向的偏转磁铁辅以四极磁铁构成对称消色差系统,将束流导向地下室,再用高梯度的三组合四极透镜强聚焦形成微米束斑,在真空中或大气中辐照样品.它将成为国内首台能够提供从低能(10MeV/u)到中能(100MeV/u)的重离子微束的公共实验平台,用于定位、定量照射靶物质(生物细胞、组织或其它非生物材料等),有助于深入揭示重离子与物质相互作用的本质,也为探索重离子辐照效应的应用提供新的手段.     

IMP重离子治癌中的剂量计算方法

针对深部肿瘤重离子治疗临床试验的需求,首先在水介质中进行生物有效剂量的优化计算,然后根据CT图像中像素CT值与水等效长度转换系数之间的关系, 结合水中的深度剂量分布曲线对每个像素进行积分得到CT图像上的生物有效剂量分布。同时介绍了基于被动式束流配送系统适形照射时的剂量确定方式, 并提出二维适形放疗也应使用分层照射方式以适应治疗时的不同要求。 这些方法适合目前及今后在IMP进行的重离子治癌临床试验研究中治疗计划系统的需要。Basic algorithms of biological effective dose optimization and dose distribution on CT image for the heavy ion therapy project at the Institute of Modern Physics (IMP), Chinese Academy of Sciences (CAS) are reported in this paper. Firstly, biological effective dose optimization is conducted in water. According to the relationship between CT number and water equivalent path length, an integral algorithm is used to calculate the average dose within a pixel and then the dose distribution in tissue is derived. Secondly, the dose determination of layer stacking conformal irradiation is described and the layer stacking method is proposed to be applied in two dimensional conformal irradiation. These methods are sufficient to the requirements of the ongoing and future heavy ion clinical trials conducted at IMP.     

金属材料中高能重离子辐照效应的理论描述

简要介绍了高能重离子在金属材料中引起辐照效应的主要理论,特别是与电子能损引起的缺陷产生与演化、离子潜径迹形成、辐照相变以及各向异性塑性形变等效应相应的理论描述.     

重离子辐射提高腺病毒介导小鼠黑色素瘤细胞转染率的研究

探讨12C6+ 离子束辐射对用带有绿色荧光蛋白基因的缺陷性腺病毒（AdCMV GFP）转染小鼠黑色素瘤细胞(B16细胞系)的影响。 采用不同剂量的12C6+ 重离子束辐射经AdCMV GFP 转染的B16细胞， 利用流式细胞仪检测腺病毒的转染率。 结果表明， 12C6＋重离子束辐射能提高腺病毒对B16细胞的转染率， 且具有量效关系。 此外， 先转染后辐射法比起先辐射后转染法能更显著地提高转染率。The effect of 12C6+ beam irradiation on AdCMV GFP (a replication deficient recombinant adenoviral vector containing CMV promoter and green fluorescent protein) gene transfection efficiency for murine melanoma cell B16 has been investigated. B16 cells infected with AdCMV GFP were irradiated by different doses of 12C6+ beam. The transfection efficiency was assessed by flow cytometry (FCM). Results show that 12C6+ beam irradiation can improve tansfection efficiency of AdCMV GFP on murine melanoma cell B16 in a dose dependent manner. In addition， the tansfection efficiency in pre tranfection plus irradiation group is higher than that in pre irradiation plus tranfection group at the same dose irradiation dose.     

重离子照射细胞存活率计算的局部效应模型的缺陷

概略介绍了重离子照射细胞存活率计算的局部效应模型， 讨论了该模型在理论假设和计算方法上存在的问题， 指出了其中的任意参数， 并通过计算检验了这些任意参数的取值变化对细胞存活率计算结果的影响。 结果表明, 细胞存活率计算结果严重依赖于这些任意参数的取值。 Scholz Kraft’s Local Effect Model (LEM) for the calculation of cell survival after heavy ion irradiation was briefly introduced. Basing on the energy conservation law and the definition of the dose， the disfigurement of LEM in theoretical framework and methods was discussed. Two artificial parameters were found in LEM， and the result obtained from this model seriously depends on these two parameters.     

重离子诱变酵母培养基的优化与研究

利用12C6+离子诱变技术对面包酵母菌种进行诱变,得到一株粗蛋白含量达到55% 以上的菌株,借助Minitab16.0,采用Plackett-Burman 实验设计法及响应面分析法,对诱变后面包酵母菌发酵培养基的成分进行了优化,得到3 个最为显著的主要影响因子:葡萄糖、酵母抽提物和硫酸镁。利用最陡爬坡实验逼近最大响应区域后,利用Box-Behnken 实验设计及响应面分析法进行回归分析。通过求解回归方程,得到优化发酵的条件为,葡萄糖:11.03 g/L、酵母抽提物:6.53 g/L、硫酸镁:5.59 g/L。面包酵母生物量为4.84 g/L,相比未进行优化时的生物量提高了15%。A mutant bread yeast strain with high protein content of 55% was gained by use of 12C6+ ions. The MINITAB 16.0 software, Plackett-Burman experimental design and response surface methodology were applied to optimize the culture medium for the irradiated yeast. The most important three factors which influenced the culture results were identified as glucose, magnesium sulphate and yeast extract. The path of the steepest ascent was undertaken to approach the optimal region of the three significant factors. Box-Behnken design and response surface methodology were used for the regression analysis. Finally, the optimal fermentation conditions were identified as glucose 11.03 g/L, yeast extract 6.53 g/L and magnesium sulphate 5.59 g/L by the regression analysis. It was found that the biomass of the bread yeasts reached 4.84 g/L and increased by 15% compared to original conditions.     

荷能离子在C60薄膜中引起的辐照效应

用 Raman散射和 XPS技术分析了能量为几百 ke V到几百 Me V的多种离子在 C60 薄膜中引起的辐照效应.分析结果表明 ,在低能重离子辐照的 C60 薄膜中 ,其晶态向非晶态的转变过程是由核碰撞主导的.在快离子 (1 2 0 ke V的 H离子和171.2 Me V的 S离子 )辐照的情况下,电子能损起主导作用.发现在H离子辐照过程中,电子能损有明显的退火效应 ,致使 C60 由晶态向非晶态转变的过程中,经历了一个石墨化的中间过程;而在 S离子辐照的情况下 ,电子能损的破坏作用超过了退火效应 ,因此 ,在C₆₀ 由晶态向非晶态转变的过程中,无石墨化的中间过程.Irradiation effecs (mainly including transformation from crystalline into amorphous state) of C 60 films induced by 120 keV H, He, N, Ar, Fe and Mo ions, 240 keV and 360 keV Ar ions, and 171.2 MeV, 125.3 MeV and 75.8 MeV S ions were analysed by means of Raman scattering and XPS technique. The analysis results indicate that amorphization process in the cases of N, Ar, Fe and Mo ions irradiation is dominated by nuclear collision, but in the case of H ion irradiation, the process is...     

HIAF高能辐照终端感生放射性

本工作是基于蒙特卡罗模拟软件FLUKA对高能强流重离子加速器（HIAF）高能辐照终端感生放射性进行初步研究。该终端可运行质子最高能量为9.3 GeV,最大流强是1.45×1012 pps（particle per second）。研究内容包括:（1）预测高能辐照终端内活化物质的放射性活度特性;（2）预测不同冷却时间高能辐照终端内残余剂量率分布。研究结果表明,HIAF正常运行时高能辐照终端内的感生放射性主要受束流垃圾桶活化产生的放射性核素影响。当加速器连续运行100天冷却4小时,垃圾桶表面残余剂量率为2.375 mSv·h-1。终端内空气中13N和15O动态饱和比浓度大于其对应的导出空气浓度。冷却水中13N和15O的活度大于对应的ALI_min。该研究是HIAF辐射防护基础研究以及加速器环境影响评价的一项重要内容。The Monte Carlo code FLUKA was used to predict the induced radioactivity of high-energy irradiation terminal of HIAF. The maximum energy of proton is 9.3 GeV, and the maximum current is 1.45×1012 pps (particle per second). In this study we were to predict:(1) the activity properties of activated substances in the experimental terminal; (2) the residual dose rate distribution in the experimental terminal at different cooling time. The results indicate that the induced radioactivity in the high energy irradiation terminal of the HIAF is mainly affected by the radionuclide induced in the beam dump. The residual dose rate on the surface of the beam dump is 2.375 mSv·h-1, after 100 d irradiation and 4 h cooling. The dynamic saturation ratio of 13N and 15O induced in the air inside the terminal is higher than its corresponding derived air concentration. The activity of 13 N and15O induced in cooling water is higher than its ALI_min. This study is a part of radiation protection basic research and environmental impact assessment for HIAF.     

一种低活化铁素体/马氏体钢的高能重离子辐照效应研究

低活化的铁素体/马氏体钢是先进核能装置（如聚变堆）的重要候选结构材料。 在聚变堆实际工作环境下, 由于高温和高氦产生率引起的材料失效是这类材料面临的一个重要问题。 本项研究以兰州重离子加速器（HIRFL）提供的中能惰性气体离子束（20Ne, 122 MeV）作为模拟辐照条件, 借助透射电子显微镜, 研究了一种低活化的9Cr铁素体/马氏体钢（T92B）组织结构的变化和辐照肿胀。 实验结果表明, 高温下当材料中晶格原子的撞出损伤和惰性气体原子沉积浓度超过一定限值时, 材料内部形成高浓度的空洞, 并且空洞肿胀率显著依赖于辐照温度和剂量; 在马氏体板条界面及其它晶界处空洞趋于优先形成, 并且在晶界交汇处呈加速生长。 基于氦泡的形核生长与空洞肿胀的经典模型探讨了在不同辐照条件（He离子、 Ne离子、 Fe/He离子双束、 快中子、 Ni离子）下铁素体/马氏体钢中肿胀率数据的关联。Low activation Ferritic/Martensitic steels are a kind of important structural materials candidate to the application in advanced nuclear energy systems. Possible degradation of properties and even failure in the condition of high temperature and high helium production due to energetic neutron irradiation in a fusion reactor is a major concern with the application of this kind of materials. In the present work microstructural evolution in a 9Cr Ferritic/Martensitic steel (T92B) irradiated with 122 MeV 20Ne ions at temperatures between 0.3—0.5 Tm (Tm is the melting point of the material) was investigated with transmission electron microscopy. High concentration voids were observed in the specimens irradiated at high temperatures when the displacement damage dose and Ne concentration exceed a certain level. Preferential formation of voids at lath boundaries and other grain boundaries was found. The data of void swellings in 9Cr ferritic/martensitic steels irradiated in different conditions (such as with He ions, Ne ions, Fe/He dual beams, fast neutrons, Ni ions etc.) were compiled and analyzed based on a classic model of helium bubble formation, and bubble to void transition.     

近物所在产生金属离子束方面的研究

Since 1998,many experiments for metallic ion production have been done on LECR2(Lanzhou ECR ion source NO.2),LECR3(Lanzhou ECR ion source NO.3)and SECRAL(Superconductiong ECB ion source Advanced design in Lanzhou)at Institute of Modern Physics.The very heavy metallic ion beams such as those of uranium were also produced by the plasma sputtering method,and supplied for HIRFL(Heavy Ion Research Facility in Lanzhou)accelerators successfully.During the test,11.SeμAU~(28 ),9eμAU~(24 ) were obtained.Some ion beams of the metal having lower melting temperature such as Ni and Mg ion beams were produced by oven method on LECR3 too.The consumption rate was controlled to be lower for ~(26)Mg ion beams production,and the minimum consumption was about 0.3mg per hour.In this paper,the main experimental results are given.Some discussions are made for some experimental phenomena and results,and some conclusions are drawn.     

近代物理研究所超重核研究现状及计划

简单描述了超重核合成的历史与国际现状， 详细地介绍了近代物理研究所已经开展的研究工作及取得的成果， 并对近代物理研究所未来在超重核研究方面的研究计划进行了介绍。 The history and the international status of the super heavy nuclei synthesis are briefly described. The related research work carried out at the Institute of Modern Physics (IMP) has been reviewed. The prospect of the super heavy nuclei research at IMP has been introduced.