Fluoroacrylate-bound fluorous-phase soluble hydrogenation catalysts

[reaction: see text] Fluoroacrylate polymer-bound hydrogenation catalysts are described. N-Acryloxysuccinimide-containing fluoroacrylate polymers were converted into phosphine ligands and subsequently into analogues of Wilkinson's catalyst by amidation of N-acryloxysuccinimide active ester residues and Rh exchange. The resulting catalysts have excellent activity and can be reused following fluorous biphasic liquid/liquid separation and extraction.     

Efficient, recoverable, copper-free Sonogashira reaction under FBS and thermomorphic mode

The solubility property of high fluorine content ligands allows us to report in this article the accomplishment under the fluorous biphasic system (FBS) the Pd-catalyzed Sonogashira reactions using novel recyclable Pd catalysts with fluorous-ponytails in the structure of 2,2′-bpy ligands that are only soluble in perfluorinated solvents at room temperature. Alternatively, without using any fluorous solvent but under the thermomorphic mode, the same Pd catalysts proceed with the Cu-free Sonogashira reactions homogeneously in DMF at 135 ± 5 °C, whereas the product mixtures after reaction remain in solution and the Pd catalysts precipitate from DMF at low temperature.     

Soluble polyisobutylene-supported reusable catalysts for olefin cyclopropanation

Polyisobutylene oligomers (PIB) have been used as soluble supports for the immobilization of cyclopropanation catalysts. In addition to simple carboxylate ligands, chiral bisoxazolines have been successfully attached to these heptane-soluble polymers. Their use and recovery has been investigated using cyclopropanation of styrene as an example. An achiral PIB-bound Rh(II) catalyst showed good activity and could be easily recycled nine times using a liquid-liquid biphasic separation technique. PIB-supported bisoxazoline ligands for Cu(I) catalysts were also prepared. These chiral catalysts showed good catalytic activity and stereoselectivity. A chiral ligand prepared from phenylglycine provided the most effective stereocontrol and gave the trans- and cis-cyclopropanation products in 94% ee and 68% ee, respectively. All three PIB-bound chiral bisoxazoline-Cu(I) catalysts prepared could be reused five to six times.     

Rhodium catalysed hydroformylation of alkenes using highly fluorophilic phosphines

Highly fluorophilic phosphines incorporating at least one aromatic ring containing two directly attached perfluoroalkyl groups have been synthesised, their partition coefficients (organic phase : fluorous phase) measured and their electronic properties probed using (1)J(PtP) data for their trans-[PtCl(2)L(2)] complexes. These phosphines have been used as modifying ligands for the rhodium catalysed hydroformylation of 1-octene in perfluorocarbon solvents. Catalyst activity, regioselectivity and the levels of rhodium leaching to the product phase vary with the substitution patterns of the modifying ligands that do not correlate with the electronic properties or partition coefficients of these ligands, but can be interpreted in terms of differences in the resting states of the catalysts.     

全氟辛基磺酰亚胺稀土(Ⅲ)催化氟两相Friedel-Crafts烷基化反应

制备了全氟辛基磺酰亚胺盐(M[N(SO2C8F17)2]n,n:3,4),并用于催化氟两相烷基化反应。考察了催化剂种类、反应时间、反应温度和催化剂用量对烷基化反应的影响,同时探讨了Yb[N(SO2C8F17)2]3对烷基化试剂摩尔比为0.2%时,催化烷基化试剂与不同芳烃的反应,表明Yb[N(SO2C8F17)2]3是一种有效的烷基化催化剂。含有催化剂的氟相通过简单的相分离后,可回收利用。氟相重复使用5次,其催化活性降低不大。     

Vinylic polymerization of Norbornenecarboxylic Acid Esters by Palladium Complexes

In recent years certain new technologies demand optically transparent high Tgpolymer materials.Some aliphatic polymers containing cyclic structure are in the marketalready and have been applied to manufacture various devices in optics industry.However,these polymers are usually of nonpolar character and their difficulties inadhesion and solubility in solvents limited their applicability in many technologies[1 ,2 ] .The polymerization of polar group-containing internal cyclic olefins by transit…     

Fluorous biphasic catalysis with dirhodium(II) perfluorocarboxylates: selective silylation of alcohols under fluorous biphasic conditions

Dirhodium(II) perfluorocarboxylates bearing C7–C13 perfluoroalkyl chains have been prepared and used as catalysts under fluorous biphasic conditions. They were found to be active and recyclable catalysts for the silylation of alcohols with triethylsilane. Hydrophobic, primary alcohols are preferentially silylated by the fluorous biphasic catalytic system in comparison with hydrophilic or secondary ones. This opens the way to the development of selective silylation protocols.     

Synthesis and properties of a novel family of fluorous triphenylphosphine derivatives

A novel approach to the preparation of perfluorotail-functionalized triarylphosphines using a p-silyl substituent as the branching point has been developed. This approach enabled the attachment of between three and nine perfluorotails per phosphorus atom, resulting in the production of highly fluorous tris[p-(1H,1H,2H, 2H-perfluoroalkylsilyl)aryl]phosphines, P[C(6)H(4)-p-SiMe(3)(-)(n)()(CH(2)CH(2)C(x)()F(2)(x)()(+1))(n)()](3) (n = 1, 2, 3; x = 6, 8), containing between 50 and 67 wt % fluorine. (31)P NMR studies indicate that the phosphorus atoms, and consequently the sigma-donor and pi-acceptor properties of these phosphines, are not influenced by the electron-withdrawing perfluoroalkyltails. The fluorous triarylphosphines are readily soluble in fluorous solvents and display fluorous phase preference in several fluorous biphasic systems. The phase partitioning of these fluorous ligands, as well as their donor properties, is discussed in relation to their potential for fluorous biphasic catalyst separation.     

Mechanism of activation of hydroxyl-containing polymers with N-hydroxysuccinimide and carbodiimides: Reason for leakage

The carbodiimide-mediated reaction of N-hydroxysuccinimide with carboxyl groups immobilized to hydroxyl-containing polymers (such as Sepharose or Trisacryl) leads to N-hydroxysuccinimide ester and N-hydroxysuccinimide derivatives of β-alanine which react subsequently with the hydroxyl group of the polymer via ester and carbamate bonds. These derivatives are formed upon interaction of dicyclohexyl carbodiimide with three equivalents of N-hydroxysuccinimide followed by a Lossen rearrangement. The amount of β-alanine thus coupled is very high compared to the number of carboxyl groups present on the resin. The β-alanine bound through the ester bond comprises about 90% of the β-alanine bound. Alkaline treatment of the ester bonded β-alanine containing polymers (prior to coupling of amino-containing ligands) causes a rearrangement yielding β-alanine with a free carboxyl group coupled through a stable carbamate linkage. After coupling of amino-containing ligands, the above-described rearrangement cannot occur, and the β-alanine-linked ligand leaks from the polymer via hydrolysis of the ester bond. The newly formed carboxyl groups (derived from the rearrangement) can be used to prepare active esters (e.g. nitrophenyl). Upon coupling with amino-containing ligands, these esters yield resins bearing chemically stable bonds.     

Preparation of poly(2,4-dichloro-6-vinyl-1,3,5-triazine-co-styrene)s as polymer supports containing two replaceable groups in monomer unit

Poly(2,4-dichloro-6-vinyl-1,3,5-triazine-co-styrene)s were prepared by the reaction of poly(2,4-diamino-6-vinyl-1,3,5-triazine-co-styrene)s with hydrochloric acid, and followed by treatment with thionyl chloride and N,N-dimethylformamide. The chlorine atoms in the resulted polymers were replaced readily by several nucleophiles such as amide, alkoxide, and mercaptide to afford the corresponding polymers in moderate yields. Among these, polymers containing oligo (oxyethylene) groups at both 2 and 4 positions of 1,3,5-triazine ring worked effectively as phase transfer catalysts for the reaction of n-octyl bromide with alkali metal thiocyanates in toluene–water systems. However, polystyrenes containing only one oligo (oxyethylene) group in monomer unit scarcely exhibited the activity under these conditions although the degree of loading of the functional group was almost the same. The activity depended on the number of oxyethylene units, and the selectivity to alkali metal ions was also observed. © 1992 John Wiley & Sons, Inc.     

Bis(oxazoline)copper complexes covalently bonded to insoluble support as catalysts in cyclopropanation reactions.

Chiral bis(oxazolines) are readily dialkylated in the methylene bridge, opening the way to immobilization at that position, keeping the C(2) symmetry of the chiral ligand. Bis(oxazolines) functionalized with two allyl or vinylbenzyl groups are easily grafted onto mercaptopropylsilica. Another approach to immobilization is the polymerization of the ligands bearing vinylbenzyl groups to yield insoluble polymers. The Cu(OTf)(2) complexes of the immobilized ligands promote the enantioselective cyclopropanation reaction between styrene and ethyl diazoacetate. The results depend on the nature of the support and the method of immobilization. With regard to the type of solid, the best results, which are similar to or even better than those obtained with the corresponding dibenzylated homogeneous catalysts, are obtained with homopolymers. With regard to the bis(oxazoline), that bearing indan groups leads to good results both onto silica and polymers, whereas with the ligand bearing tert-butyl groups good enantioselectivities are only obtained with homopolymeric catalysts. Some of the heterogeneous catalysts can be easily recovered and reused, as much as five times, with the same yield and stereoselectivities.     

Studies on thermotropic liquid-crystalline polymers: Part X. Synthesis and properties of crosslinkable aromatic copoly(ester)s containing conjugated double bonds

A series of aromatic copoly(ester)s containing conjugated double bonds was prepared from p-phenylene bis(acrylic acid) (PPBA) with a mixture of methylhydroquinone (MHQ) and various hydroxycarboxylic acids in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC) and thermal optical polarized microscopy. Under an optical polarized microscope all copoly(ester)s show a nematic thermotropic liquidcrystalline phase. Upon heating, these polymers undergo a photocrosslinking reaction characterized by IR and solubility analysis. This crosslinking reaction also takes place in the liquid-crystalline phase with the retention of the nematic order in the final crosslinked solid. © 1993 John Wiley & Sons, Inc.     

Efficient condensation of carboxylic acids with alcohols catalyzed by fluorous ammonium triflates

The use of fluorous ammonium salts as metal-free catalysts for the direct condensation of equimolar amounts of carboxylic acids and aliphatic alcohols has been investigated. Esterification reactions were thus conveniently carried out under mild fluorous biphasic conditions, in the presence of 1 mol % of fluorous ammonium triflate and without recourse to any additional water removal technique. Good to excellent ester yields were obtained in the case of primary and secondary aliphatic alcohols. The fluorous salt was easily recovered by simple phase separation and reused at least three times without considerable loss of activity.     

A comparative study of the asymmetric epoxidation of aromatic olefins using the first generation manganese salen epoxidation catalysts and their light fluorous variants: an interesting discovery on the use of benzotrifluoride as a cosolvent

The asymmetric epoxidation of aromatic olefins using optically active first generation manganese salen catalysts and light fluorous variants was examined. Although a slight decrease in the enantioselectivity of the product was observed when light fluorous catalysts were employed, the activities of these catalysts were higher than those of the non-fluorous catalysts. Additionally the influence on enantioselectivity of the oxidation was examined when fluorous cosolvents were used. The enantioselectivity of the oxidation increased with the addition of benzotrifluoride (BTF) regardless of whether a fluorous or non-fluorous salen catalyst was used.     

Fluorous solvent‐soluble imaging materials containing anthracene moieties

Highly fluorinated photoresist polymers that can undergo photodimerization reactions were designed using an anthracene‐based monomer. Through the random radical copolymerizations of 6‐(anthracen‐9‐yl)hexyl methacrylate ( AHMA ) and semiperfluorodecyl methacrylate ( FDMA ) with four different compositions, polymers with M_n = 20,000–27,000 (M_w/M_n = 2.0–2.9) were prepared in benzotrifluoride. The polymers, in particular fluorous solvent‐soluble imaging material‐2 ( FSIM‐2 ), showed sufficient solubility in fluorous solvents, including hydrofluoroethers, but were rendered insoluble by UV exposure (365 nm). This photochemical solubility change was evaluated quantitatively by a quartz crystal microbalance technique, along with tracing the chemical reaction by UV–vis spectroscopy. Finally, FSIM‐2 and fluorous solvents were applied to the photolithographic patterning of organic light‐emitting diode pixels. In the patterning protocol involving the lift‐off of resist films in fluorous solvents, FSIM‐2 was recognized as a promising photoreactive material when compared with a reference polymer P(FDMA‐MAMA) , which necessitates acidolysis reactions for lithographic imaging. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1252–1259     

Synthesis of two new chiral fluorous bis(oxazolines) and their applications as ligands in catalytic asymmetric reactions

Two new chiral fluorous bis(oxazolines) with a fluorous content of 56.9% and 59.3%, respectively, have been prepared starting from (S)-serine and (S)-tyrosine. Applications of these compounds as fluorous box ligands in asymmetric alkylations gave ees up to 92%, and in allylic oxidations ees up to 50%. Recycling and reuse of the ligands in asymmetric alkylation and of the catalytic system in allylic oxidation gave the same enantioselectivities.     

Triazole-based monophosphines for Suzuki-Miyaura coupling and amination reactions of aryl chlorides

[reaction: see text] A new class of triazole-based monophosphine 1 (ClickPhos) has been prepared via efficient 1,3-dipolar cycloadditions of readily available azides and acetylenes. Palladium complexes derived from these ligands provide highly active catalysts for Suzuki-Miyaura coupling and amination reactions of aryl chlorides.     

Fluorous Boc ((F)Boc) carbamates: new amine protecting groups for use in fluorous synthesis

The first fluorous variants of the Boc (tert-butyloxycarbonyl) group have been prepared and tested for their suitability as nitrogen protecting groups. A group with two fluorous chains and an ethylene spacer, (RfCH2CH2)2(CH3)COC(O)-, was readily attached to a representative amine but was difficult to cleave. In contrast, groups with two fluorous chains and a propylene spacer, (RfCH2CH2CH2)2(CH3)COC(O)-, or one fluorous chain and an ethylene spacer, (RfCH2CH2)(CH3)2COC(O)-, were readily formed and cleaved. The fluorous alcohol component of the (F)Boc group can be removed by evaporation and can be recovered and reused. The utility of the new (F)Boc group (C8F17CH2CH2)(CH3)2COC(O)- was demonstrated in 16 and 96 compound library synthesis exercises. Separations can be achieved either by manual, parallel fluorous solid-phase extraction, or automated, serial fluorous chromatography. The results provide additional confirmation of the value of "light" fluorous synthesis techniques, and the new fluorous Boc groups expand the applicability of fluorous synthesis techniques to many classes of nitrogen-containing organic compounds.     

Preparation and properties of some water-soluble,comb-shaped,amphiphilic polymers

Water-soluble comb-shaped polymers were prepared through grafting of poly(ethylene glycol) monomethyl ethers (MPEG) onto acrylic and methacrylic ester copolymers by transesterification reactions. The grafting was alkali-catalyzed, and performed in refluxing toluene solution or in melt at 155°C. The grafting efficiency was found to be on the order of 1 graft/10 monomer units. Epoxy groups in glycidyl methacrylate copolymers were also utilized for grafting. The crude graft copolymers were purified through chromatography and characterized by NMR and IR spectroscopy. Polymers prepared from MPEG 2000 were crystalline with melting points 10–15°C lower than the MPEG used. All polymers were shown to be surface active with CMC on the order of 1.5 g/L, and surface tensions of 38–45 dyn/cm. When used as emulsifiers the graft copolymers containing bulky lipophilic ester groups (2-ethylhexyl t-butyl) gave oil-in-water (o/w) and water-in-oil (w/o) emulsions from xylene/water with higher stability than those containing straight chain ester groups (methyl nbutyl n-docecyl). The most stable emulsions were obtained by dissolving the polymers in the organic phase.     

Ordered Mesoporous Silica as Supports in the Heterogeneous Asymmetric Catalysis

Enantioselective synthesis of organic compounds has been studied by homogeneous catalysts for several years. However, these catalysts have yet to make a significant impact on industrial scales for fine chemical synthesis. A primary reason is the designing of a homogeneous asymmetric catalyst, which requires relatively bulky ligands and catalyst recovery and recycling often causes problems. One of the convincing ways to overcome this problem is to immobilise the asymmetric catalyst onto a solid support and the resulting heterogeneous asymmetric catalyst system can, in principle, be readily re-used. A large number of supports such as inorganic oxides including zeolites, alumina, zirconia, silica and organic polymers have been employed as supports in heterogeneous asymmetric catalysis. Therefore, in this review article we have summarized the work done by us in our laboratory on the immobilization of chiral transition metal complexes such as Ru, Ir, Mn and Ti onto ordered mesoporous silica and its asymmetric catalysis. All these immobilized catalysts were well characterized by different physicochemical techniques to confirm the structural retention of the support as well as the active metal complex after immobilization. This report includes our asymmetric catalytic investigations in enantioselective reactions such as hydrogenation of ketones, olefins, oxidation of sulfides and oxidative kinetic resolution of alcohols and sulfoxides through immobilized heterogeneous catalyst systems.