Thermal decomposition of tricyclohexylidene triperoxide

Journal of Thermal Analysis and Calorimetry - The thermal decomposition of tricyclohexylidene triperoxide both pure and in 4% w/w solution of n-dodecane to yield mainly 16-hexadecanolide is studied...     

Formation of acetone cyclic triperoxide over titania-incorporated mesoporous materials

Acetone cyclic triperoxide (ACTP) was formed over titania-incorporated mesoporous material catalysts from a mixture of acetone and hydrogen peroxide under a mild and acid-free condition. Formation of ACTP was confirmed by single-crystal X-ray crystallography. The formation of ACTP could be observed in this study because of using the catalyst with a large amount of titania-incorporation at 23 wt.% and its large pore size. This revised version was published online in June 2006 with corrections to the Cover Date.     

Thermal decomposition reaction of 3,3,6,6-tetramethyl- 1,2,4,5-tetroxane in 2-methoxy- ethanol solution

The thermal decomposition study of 3,3,6,6-tetramethyl-1,2,4,5-tetroxane (acetone cyclic diperoxide) was carried out in 2-methoxyethanol solution in the 130-166 °C temperature range. The overall reaction follows a first-order kinetic law up to at least 75% diperoxide conversion. The activation parameters (ΔH^# = 22.5 ± 0.7 kcal⋅mol^–1 and ΔS^# = -25.6 ± 0.5 cal⋅mol^–1⋅K^–1) for the unimolecular rupture of the O–O bond in the diperoxide molecule were obtained by measuring the remnant diperoxide at different reaction times by the CG technique. Acetone was detected by GC as the major organic product of the reaction.     

Thermal decomposition of formaldehyde diperoxide in aqueous solution

Thermal decomposition of formaldehyde diperoxide (1,2,4,5-tetraoxane) in aqueous solution with an initial concentration of 6.22 × 10^?3 M was studied in the temperatures range from 403 to 439 K. The reaction was found to follow first-order kinetic law, and formaldehyde was the major decomposition product. The activation parameters of the initial step of the reaction (ΔH ^≠ = 15.25 ± 0.5 kcal mol^?1, ΔS ^≠ = ?47.78 ± 0.4 cal mol^?1K^?1, E _a = 16.09 ± 0.5 kcal mol^?1) support a mechanism involving homolytic rupture of one peroxide bond in the 1,2,4,5-tetraoxane molecule with participation of the solvent and formation of a diradical intermediate.     

Kinetics and mechanism of the thermal decomposition reaction of acetone cyclic diperoxide in methyl tert‐butyl ether solution

The thermal decomposition reaction of acetone cyclic diperoxide (3,3,6,6‐tetramethyl‐1,2,4,5‐tetroxane, ACDP), in the temperature range of 130.0–166.0°C and initial concentrations range of 0.4–3.1 × 10^?2 mol kg^?1 has been studied in methyl t‐butyl ether solution. The thermolysis follows first‐order kinetic laws up to at least ca 60% ACDP conversion. Under the experimental conditions, the activation parameters of the initial step of the reaction (ΔH^# = 33.6 ± 1.1 kcal mol^?1; ΔS^# = ?4.1 ± 0.7 cal mol^?1 K^?1; ΔG^# = 35.0 ± 1.1 kcal mol^?1) and acetone, as the only organic product, support a stepwise reaction mechanism with the homolytic rupture of one of its peroxidic bond. Also, participation of solvent molecules in the reaction is postulated given an intermediate diradical, which further decomposes by C? O bond ruptures, yielding a stoichiometric amount of acetone (2 mol per mole of ACDP decomposed). The results are compared with those obtained for the above diperoxide thermolysis in other solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 302–307, 2004     

Thermal decomposition of 3-chloro-3-trichloromethyldiazirine in solution

The thermal decomposition of 3-chloro-3-trichloromethyldizairine in carbon tetrachloride and iso-octane has been investigated over the temperature range 75–115°C. The products, tetrachloroethylene and nitrogen, are formed quantitatively by a first-order reaction which is probably unimolecular: The results yielded the following Arrhenius equations: .     

Shock-initiated decomposition of tetramethylgermane and the reaction of methyl radicals with toluene

The shock-initiated decomposition of tetramethylgermane (1078–1242 K) has been found to involve successive elimination of methyl radicals with the rate constant k₁ for the first step given by In the presence of excess toluene the products were CH₄ (major), C₂H₄, and C₂H₆. Results relevant to the reaction of methyl radicals with toluene compared to methyl radical recombination are discussed.     

Thermal decomposition of octahedral Ni(II) complexes with acetone 1-naphthoylhydrazone

The thermal decompositions of acetone 1-naphthoylhydrazone (L) and its octahedral complexes with Ni(II), with the general formula NiL₂X₂ (X=Cl, Br, NO₃ and NCS), were studied in air and nitrogen atmospheres. It was established that the organic ligand is decomposed in an exothermic processes, which is followed by oxidation of the decomposition fragments by atmospheric oxygen. At temperatures below 640°, all the complexes decompose completely, yielding NiO as the final product, which was confirmed by its X-ray analysis. From the difference between the enthalpy changes for the decompositions of the complexes and of the ligand itself, the nature of the final oxide, and the crystal field splitting parameters obtained from optical measurements, the corresponding stabilization energies were determined.

---

Zusammenfassung In Luft- und Stickstoffatmosphäre wurde die thermische Zersetzung von Azeton-1-naphthoylhydrazon (L) und seinen oktaedrischen Komplexen mit Ni(II) mit der allgemeinen Formel NiL₂X₂ (mit X=Cl, Br, NO₃ und NCS) untersucht. Es wurde festgestellt, daß der organische Ligand in einem exothemen Prozeß einer Zersetzung und einer anschließenden Oxydation der Zersetzungsprodukte durch Luftsauerstoff unterliegt. Unterhalb 640° zerfällen alle Komplexe vollständig und liefern NiO als Endprodukt, welches mittels Röntgendiffraktionsanalyse identifiziert wurde. Aus dem Unterschied zwischen Enthalpieänderungen für die Zersetzung der Komplexe und des Liganden selbst, aus der Art der erhaltenen Oxide und aus den Parametern der durch optische Messungen bestimmten Kristallfeldaufspaltung wurden die entsprechenden Stabilisierungsenergien bestimmt.

     

Kinetics and mechanism of the thermal decomposition reaction of acetone cyclic diperoxide in the gas phase

The kinetics of the thermal decomposition reaction of gaseous 3,3,6,6-tetramethyl-1,2,4,5-tetroxane (ACDP) in the presence of n-octane was studied in the 403.2–523.2 K temperature range. This reaction yields acetone as the organic product. Under optimum conditions, first-order kinetics were observed, included when the S/V ratio of the Pyrex reaction vessel was increased by a nearly six-fold factor. In the range 443.2–488.2 K the temperature dependence of the rate constants for the unimolecular reaction in conditioned vessels is given by In k₁/(s^?1) = (31.8 ± 2.5) ? [(39.0 ± 2.5)/RT]. The value of the energy of activation in kcal/mol correspond to one O? O bond homolysis of the ACDP molecule in a stepwise biradical initiated decomposition mechanism. At the lower reaction temperatures as well in preliminary experiments participation of a surface catalyzed ACDP decomposition process could be detected. © 1994 John Wiley & Sons, Inc.     

Microdetermination of acetone in aqueous solution

Diazotized anthranilic acid has been found to be a possible reagent for the spectrophotometric microdetermination of acetone in aqueous solution. The determination range is 10–130 μg/ml. The coefficient of variation does not usually exceed 12% for 60–130 μg of acetone but increases to 2.8% at the 10-μg level. The average relative error for five determinations ranges from ?1.5 to 2%. The molar absorptivity is 9.28 × 10³ liter · mol^?1 · cm^?1 in the presence of starch as a surfactant. Possible reaction path mechanism has been suggested for the colored body formation.     

Thermal decomposition of peroxydisulfate in aqueous solutions of toluene. Oxidation of benzyl radicals by nitrobenzene.

The oxidation of benzyl radicals by nitrobenzene is described, A mechanism involving formation of an adduct followed by homolytic cleavage to PhCH₂O. radical is proposed.     

Thermal decomposition of vinylacetylene in shock waves: Rate constant of initiation reaction

The thermal decomposition of vinylacetylene was studied behind incident shock waves over the temperature range 1200–1750 K and over the pressure range 0.3–0.6 atm by tracing the time variation of absorption at 230 nm. The initiation reaction and the rate constant in the thermal decomposition of vinylacetylene were determined from the initial slope of the absorption curve as C₄H₄ → h₁, C₄H₃+H, k₁ = 6.1 × 10¹³ exp (−80 kcal/RT) s⁻¹.     

Thermal decomposition behaviour and kinetics of a mixed solution: n-propyl nitrate and nitric acid solution

Journal of Thermal Analysis and Calorimetry - To provide a theoretical basis for improving the thermal safety of spent acid, its decomposition behaviour was studied. A mixed solution of n-propyl...     

High-temperature measurements of the reactions of OH with toluene and acetone

The reaction of hydroxyl [OH] radicals with toluene [C6H5CH3] was studied at temperatures between 911 and 1389 K behind reflected shock waves at pressures of approximately 2.25 atm. OH radicals were generated by rapid thermal decomposition of shock-heated tert-butyl hydroperoxide [(CH3)3-CO-OH], and monitored by narrow-line width ring dye laser absorption of the well-characterized R1(5) line of the OH A-X (0,0) band near 306.7 nm. OH time histories were modeled by using a comprehensive toluene oxidation mechanism. Rate constants for the reaction of C6H5CH3 with OH were extracted by matching modeled and measured OH concentration time histories in the reflected shock region. Detailed error analyses yielded an uncertainty estimate of +/-30% at 1115 K for the rate coefficient of this reaction. The current high-temperature data were fit with the lower temperature measurements of Tully et al. [J. Phys. Chem. 1981, 85, 2262-2269] to the following two-parameter form, applicable over 570-1389 K: k3 = (1.62 x 10(13)) exp(-1394/T [K]) [cm3 mol(-1) s(-1)]. The reaction between OH radicals and acetone [CH3COCH3] was one of the secondary reactions encountered in the toluene + OH experiments. Direct high-temperature measurements of this reaction were carried out at temperatures ranging from 982 to 1300 K in reflected shock wave experiments at an average total pressure of 1.65 atm. Uncertainty limits were estimated to be +/-25% at 1159 K. A two-parameter fit of the current data yields the following rate expression: k6 = (2.95 x 10(13)) exp(-2297/T [K]) [cm3 mol(-1) s(-1)].     

Dielectric properties of mixtures of acetylene tetrachloride with toluene and acetone

Relative permittivities are reported for binary liquid mixtures of acetylene tetrachloride (ATC) with toluene and acetone at 35°C. Measurements of refractive indices have also been made for the mixtures. The values of the quantity , the deviations of the relative permittivities of these mixtures from ideality, have been calculated. The negative values of obtained for ATC+ toluene mixtures may be explained as being due to a decrease in the degree of alignment of the molecular dipoles with changing composition of the mixture, whereas the positive values of obtained for ATC+acetone mixtures are attributed to the formation of molecular complex between acetone and CHCl₂CHCl₂. The values of the Kirkwood correlation parameter g for both sets of mixtures have been calculated using the relative permittivity data.