Determination of cerium(III) and cerium(IV) in nanodisperse ceria by chemical methods

Percentages of different valence cerium species have been determined in powdery samples, redispersible compositions, and aqueous sols of nanodisperse ceria prepared from cerium(IV) and cerium(III) salts by various methods with or without organic stabilizers. Cerium(III) is shown to be virtually absent in nearly all of the CeO₂ samples studied. Organic stabilizers are shown to be capable of reducing cerium(IV) in aqueous CeO₂ sols.     

Extraction of trace amounts of cerium(III) by oxides of amines and its separation from cerium(IV)

The solvent extraction of cerium(III) from nitric, hydrochloric and sulphuric acid solutions by 4-(5-nonyl)pyridine oxide and trioctylamine oxide in xylene has been studied. The influence of the concentration of the solvents and salting-out agents is described. From the results of partition experiments attempts have been made to deduce the nature of the extracted species. The investigation shows that cerium(III) can be separated from cerium(IV) from very dilute solutions of mineral acids and also from moderate nitric acid media.     

Oxidation of cerium(III) to cerium(IV) using a mixture of hot concentrated perchloric and sulfuric acids

The oxidation of cerium(III) to cerium(IV) using a hot concentrated mixture of perchloric and sulfuric acids is shown to be quantitative Optimum conditions for the oxidation are described Complete removal of chlorine, an interfering decomposition product of boiling perchloric acid, is achieved by purging the concentrated acid solution with nitrogen before dilution with water The presence of sulfuric acid is essentral, the chief role of sulfuric acid apparently being to stabihze the cerium(IV) as a sulfatocerate complex.     

Determination of traces of hydrogensulfite by chemiluminescence with cerium(IV) sulfate as the reagent

Trace amounts of hydrogensulfite in aqueous solution (0.19–50 ng ml^?1 SO₂) are determined continuously with a chemiluminescence method based on a cerium(IV) sulfate reagent at pH 1.8. The intensity per unit SO₂ concentration is about 5 times that obtained with a permanganate reagent. The inhibitory effects of nitrite, transition metal ions and formaldehyde are also reduced.     

Sensitive determination of phenolic compounds using high-performance liquid chromatography with cerium(IV)-rhodamine 6G-phenolic compound chemiluminescence detection

A simple, selective and sensitive determination method of 20 phenolic compounds has been developed using high-performance liquid chromatography (HPLC) with chemiluminescence detection. The method is based on the chemiluminescent enhancement by phenolic compound of the cerium(IV)-rhodamine 6G system in sulfuric acid medium. Twenty phenolic compounds were separated on a XDB-C(8) column with a gradient elution using a mixture of methanol and 1.0% acetic acid as a mobile phase. Under the optimized conditions, a linear working range extends 2 orders of magnitude with the relative standard deviations of intra- and inter-day precision below 4.0%, and the detection limits (S/N = 3) were in the range of 1.5-82.1 ng/ml. The chemiluminescence reaction was compatible with the mobile phase of high-performance liquid chromatography. The proposed method has been successfully applied to the assay of phenolic compounds in red wine without any pretreatment.     

Catalytic spectrophotometric determination of trace amount of cerium(IV)

Based on a property that in dilute hydrochloric acid hydrogen peroxide oxidizes Ponceau S to fade and cerium(IV) has a catalytic effect on the reaction, a new spectrophotometric method was developed for the determination of trace cerium(IV). At 450 nm, the cerium(IV) concentration presents a good linear relationship over the range of 0.08?4 μg/mL with the fading degree ΔA. Its linear regression equation is ΔA = 0.0475c (μg/mL) + 0.0007, with a correlation coefficient of 0.9991. The detection limit of method is 0.05 μg/mL. The method has been successfully applied to the determination of cerium in water and molecular sieve samples with good results. The relative standard deviations of eleven determinations were 0.97?1.11 and 0.19?1.01%, respectively. The recoveries of standard additions were 99.4?99.9 and 99.2?101.0%, respectively. The reliability of this method was certified by parallel determination against the dibromo-p-chlorochlorophosphonazo spectrophotometry.     

间接荧光检测离子色谱法分析维生素C、亚硫酸根和硫代硫酸根

报道了一种用离子色谱分析维生素Ｃ、亚硫酸根和硫代硫酸根离子的新方法。在这种方法中采用了四价铈柱后氧化还原反应和三价铈荧光检测法。同时也给出了使用这种方法的一些最佳的实验条件。     

Measurement of dissolved oxygen based on enhanced cerium(IV) chemiluminescence.

The reaction of Ce(IV) with pyrogallol caused chemiluminescence, which was enhanced by dissolved oxygen. Dissolved oxygen in water was able to help in the determination by enhancing the chemiluminescence intensity. The limit of detection calculated from 3sigma was 43 micromol/dm3, and the relative standard deviation was 1.2% at 613 micromol/dm3 (n = 5). The results obtained for natural and tap water samples were compared with those provided by conventional methods; the agreement between them corroborated the usefulness of the proposed method. The chemiluminescence mechanism was studied by examining the effect of interference with Cl- and measuring the chemiluminescence spectrum. The chemiluminescence emitter, however, could not be identified.     

A chemiluminescence photometer for trace chromium(III) determinations

The design of a simple chemiluminescence photometer is described. The sample is injected into a spectrophotometric cell containing the reagents, and the resultant chemiluminescence peak is recorded along with the peak height and peak area. The instrument includes a temperature-controlled cell holder with stirring capabilities. The determination of p.p.b. levels of chromium(III) is described. Chromium(III) enhances the chemiluminescence reaction of luminol and hydrogen peroxide in basic solutions. Useful calibration curves are obtained from 4 · 10^-9 to 10^-4 M Cr(III); 5 · 10^-10 M is the detection limit. Chromium(III) is determined in natural water samples and NBS Orchard leaves.     

Simultaneous spectrofluorimetric determination of cerium(III) and cerium(IV) by flow injection analysis

Cerium(III) (1–100 μg l^?1) is determined by injection into a carrier stream of hydrochloric, perchloric or sulphuric acid, and monitoring its native fluorescence. Cerium(IV) can be determined similarly by incorporating a zinc reductor minicolumn into the system. Splitting the injection sample so that only part passes through the reductor, and the remainder by-passes it, allows total cerium and cerium(III) to be detected from the two sequential fluorescence peaks obtained.     

Spectrofluorimetric determination of pharmaceutical compounds with the cerium(IV)—cerium(III) system

The compounds to be determined are oxidised by cerium(IV). The concentration of cerium(III) formed is measured spectrofluorimetrically. The method has been used both in solution and, by fluorodensitometry, on t.l.c. plates. Detection limits of some substances are 15 ng ml^-1 for the solution method and 5 ng per spot for the t.l.c. method.     

Fluorimetric trace determination of cerium(III) with sodium triphosphate

Sodium triphosphate acts as a specific reagent for enhancing the fluorescence intensity of cerium(III). The purpose of this study was to investigate the spectrofluorimetric determination of trace amounts of Ce(III) in sodium triphosphate solution. The excitation and emission wavelengths are 303.5 nm and 353 nm respectively. Optimum sodium triphosphate concentration is found to be 0.074 g l(-1) at room temperature. The fluorescence varies linearly with the concentration of cerium(III) in the range 0.001-45 mug ml(-1). The detection limit is 9.4 x 10(-4)mug ml(-1). The relative standard deviations for 30 mug ml(-1) and 0.05 mug ml(-1) Ce(III) in 0.074 g l(-1) sodium triphosphate solution are 1.1% and 0.72% respectively. Quenching effects of other lanthanides and some inorganic anions are described. This method is a direct and rapid analytical method for the determination of Ce(III) in rare earth mixtures and cerium concentrates.     

Determination of chromium(III) and total chromium using dual channels on glass chip with chemiluminescence detection

A simple, rapid and sensitive method for the determination of chromium(III) and total chromium using the simple dual T channels on glass chip with negative pressure pumping system and chemiluminescence (CL) detection is presented. The CL reaction was based on luminol oxidation by hydrogen peroxide in basic aqueous solution catalyzed by chromium(III). Total chromium in form of chromium(III) was achieved after chromium(VI) was completely reduced by acidic sodium hydrogen sulfite. Total chromium could then be determined with the same strategy as the chromium(III). The CL reagent was composed of 1.0 × 10⁻⁴ mol/L luminol, 1.0 × 10⁻² mol/L hydrogen peroxide and 0.10 mol/L sodium bromide in 0.050 mol/L carbonate buffer (pH 11.00). The 1.0 × 10⁻² mol/L ethylenediaminetetraacetic acid was added into the sample solution in order to improve the selectivity. Chromium(III) could be detected at a notably concentration of 1.6 × 10⁻¹⁶ mol/L and a linear calibration curve was obtained from 1.0 × 10⁻¹⁵ to 1.0 × 10⁻¹³ mol/L. The sample and CL reagent consumption were only 15 and 20 μL, respectively. The analysis time was less than 1 min per sample with the precision (%R.S.D.) was 4.7%. The proposed method has been applied successfully to the analysis of river water, mineral waters, drinking waters and tap water. Its performance was verified by the analysis of certified total chromium-reference materials and by recovery measurement on spiked synthetic seawater sample.     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

A review of recent advances in chemiluminescence detection using nano-colloidal manganese(IV)

The application of ‘soluble’ (colloidal) manganese(IV) for chemiluminescence detection is reviewed, focussing on papers published since the last comprehensive review of the subject in 2008. Advances in this reagent system include: the on-line formation of manganese(IV); new insight into the light-producing pathway and selectivity of the reagent; its application to assess total antioxidants in plant derived samples and oxidative stress in biological fluids and tissues; and the replacement of the formaldehyde enhancer with ethanol.     

Spectrofluorometric trace determination of cerium(III) in sodium hexametaphosphate solutions

The use of sodium hexametaphosphate in the spectrofluorometric determination of trace amounts of cerium(III) ions is described. Sodium hexametaphosphate acts as a specific reagent for enhancing the fluorescence intensity of cerium(III) in aqueous solutions. The apparent excitation and fluorescence wavelength used are 304 and 344 nm, respectively. Maximum fluorescence intensity is obtained by irradiating Ce(III) dissolved in 5.346 g/l sodium hexametaphosphate solution at room temperature. The fluorescence varies linearly with the concentration of cerium(III) in the range of 0.001-60 microg/ml. The coefficient of variation for 45 microg/ml Ce(III) in 5.346 g/l sodium hexametaphosphate solution is 1. The quenching effects of other lanthanides and some inorganic anions are given. This technique permits a direct and rapid determination of cerium(III) in rare earth mixtures and cerium concentrates.     

Spectrofluorometric trace determination of cerium(III) in sodium hexametaphosphate solutions

The use of sodium hexametaphosphate in the spectrofluorometric determination of trace amounts of cerium(III) ions is described. Sodium hexametaphosphate acts as a specific reagent for enhancing the fluorescence intensity of cerium(III) in aqueous solutions. The apparent excitation and fluorescence wavelength used are 304 and 344 nm, respectively. Maximum fluorescence intensity is obtained by irradiating Ce(III) dissolved in 5.346 g/l sodium hexametaphosphate solution at room temperature. The fluorescence varies linearly with the concentration of cerium(III) in the range of 0.001–60 g/ml. The coefficient of variation for 45 g/ml Ce(III) in 5.346 g/l sodium hexametaphosphate solution is 1. The quenching effects of other lanthanides and some inorganic anions are given. This technique permits a direct and rapid determination of cerium(III) in rare earth mixtures and cerium concentrates.     

Spectrophotometric determination of cerium(IV) using a phenothiazine derivative.

A simple, rapid and sensitive spectrophotometric method has been proposed for the determination of cerium(IV) using a phenothiazine derivative, propionyl promazine phosphate (PPP). This method is based on the formation of a red-colored radical cation upon a reaction of PPP with cerium(IV) in a phosphoric acid medium having maximum absorbance at 513 nm. Beer's law is valid over the concentration range of 1-11 microg/ml with a Sandell's sensitivity value of 16.14 ng/cm2. The proposed method has been successfully applied to the analysis of magnesium-base cerium alloys and synthetic mixtures corresponding to various cerium alloys. Other phenothiazine derivatives viz. butaperazine dimaleate and propericiazine were also used for the determination of cerium(IV).