介孔硅纳米储存器在智能药物释放系统的应用

开发新型细胞微环境刺激响应性智能药物控释系统是目前材料学、药理学与临床医学研究的共同热点之一,其目的在于寻求合适的药物载体,提高药物的安全性、有效性及降低药物毒副作用。本文综述了介孔硅功能复合纳米材料在生物医药领域的应用研究进展;通过对其进行特定的化学修饰、生物修饰、物理修饰,不仅能特异性细胞识别靶向,还能针对病变细胞实现药物定点、定时、定量的“生物爆破”释放;这在药物可控释放、靶向癌症治疗、靶向基因递送等领域展示了其广阔的应用前景。同时,本文还系统地分析和总结了各种智能响应性介孔硅纳米储存器的制备方法和响应机制,包括“无机纳米塞-介孔硅”纳米智能控释系统、“有机大分子控制器-介孔硅”智能功能复合型控释系统、“分子开关控制器-介孔硅”自响应性纳米控释系统等,这为设计新型响应性介孔硅纳米储存器系统提供了借鉴与思路。     

基于介孔二氧化硅纳米颗粒的可控释放体系

基于介孔二氧化硅的控制释放体系具有良好的生物相容性、细胞靶向性、精准响应性控制释放和到达目标位点前有效阻止药物释放等功能特性。近年来,基于介孔二氧化硅的可控释放体系已成为众多科研工作者研究的热点。本文讨论了基于介孔二氧化硅纳米颗粒可控释放体系的特点,同时以不同的响应特性为主线,系统分析和总结了各种响应性介孔二氧化硅控释体系的开关及其控制释放机制,包括氧化还原控释系统、光控释系统、pH控释系统及生物分子相关控释系统等一系列基于介孔二氧化硅的控释系统,并对该领域未来的发展方向作了展望。     

由聚合物门控的介孔二氧化硅基刺激响应性药物递送系统

本文主要介绍了以聚合物体系作为门控构筑的基于介孔二氧化硅纳米粒子的刺激响应性药物控释体系,并根据聚合物类别将门控体系分为聚合物刷、聚合物交联网络和聚合物包裹层三类.根据聚合物"阀门"与无机纳米粒子的共价或非共价连接方式,综述了这些杂化材料在不同外界刺激作用下的药物控制释放行为,并给出该领域所面临的机遇和挑战.     

苯硼酸功能化聚合物纳米载体用于蛋白质药物胞内递送

蛋白质药物在疾病治疗方面具有广泛应用,但它们的低细胞膜穿透性往往导致生物利用度较低.近年来,人们开发了一系列纳米载体用于提高蛋白质药物的胞内递送效率,其中基于苯硼酸及其衍生物的聚合物纳米载体显示出良好的应用前景.本文综述了苯硼酸功能化聚合物纳米载体在蛋白质药物胞内递送方面的最新研究进展.首先,简要介绍了苯硼酸的化学性质及其二醇、pH和活性氧(ROS)响应性.其次,从苯硼酸与蛋白质药物的结合方式不同出发,重点综述了通过动态共价作用和N→B配位等非共价作用构筑的苯硼酸功能化聚合物纳米载体在蛋白质药物胞内递送方面的典型研究实例,并对这些载体的组成、构筑方式和响应性释放机制进行了分析、总结.最后,介绍了利用苯硼酸增强细胞摄取和促进药物透过血脑屏障方面的研究进展.希望能为设计制备基于苯硼酸的新型蛋白质药物胞内递送体系提供借鉴.     

pH响应的介孔二氧化硅纳米颗粒的制备及可控释放

选择带负电荷且溶解度和分子结构对pH值非常敏感的聚丙烯酸作为封堵分子, 采用静电吸附的修饰方法, 制备了pH响应的MCM-41型介孔二氧化硅纳米颗粒. 利用高倍透射电子显微镜(TEM)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)及比表面积分析等手段表征了介孔二氧化硅纳米颗粒的物理化学性质. 以联钌吡啶染料分子作为模式客体分子, 研究了pH调控下的模式客体分子在介孔二氧化硅纳米颗粒中的包裹及释放行为. 结果表明, 该介孔二氧化硅纳米颗粒对pH具有很好的响应性; 在近中性条件下, 带正电的二氧化硅纳米颗粒通过静电吸附作用吸附带负电的聚丙烯酸, 导致介孔封堵, 使包载的染料分子几乎无释放; 客体分子的释放率随着pH值的降低而升高, 当pH≤5时, 染料分子显著释放, pH=1时客体分子的释放率高达98％, 可以实现对包载客体分子的控制释放. 该pH响应的介孔二氧化硅纳米颗粒载体具有制备简便、 价格低廉和包载量大等优点, 有望应用于药物的控制释放.     

透明质酸修饰的介孔二氧化硅包覆金纳米棒的制备及在肿瘤化疗-热疗联合治疗中的应用

通过在包覆了金纳米棒的介孔硅表面修饰生物相容性的透明质酸, 得到了具有肿瘤靶向性的多功能药物载体. 实验结果表明, 透明质酸可以通过酰胺键修饰在介孔硅表面, 所得药物载体可在透明质酸酶作用下实现选择性释放. 该体系在近红外区域具有较高的吸收, 可以在近红外光照射下实现光热转换. 细胞实验结果表明, 该多功能药物载体可以有效靶向CD44过量表达的乳腺癌细胞, 通过CD44介导的内吞富集在肿瘤内部, 结合化学药物治疗和光热治疗, 显示出更高的肿瘤细胞凋亡效率.     

聚合物纳米药物载体的研究进展

近年来,大量研究结果表明纳米技术可显著提高传统药物的疾病治疗效果,并在生物医学领域引起了广泛关注.迄今,多种聚合物纳米体系已被研发并用于药物的靶向递送.随着纳米技术的不断发展,各类生物微环境响应的功能基团也被应用于构筑新型药物载体,以提高患病部位的药物富集及减少药物的毒副作用.聚合物纳米药物载体在癌症治疗、代谢类疾病治疗及抗菌等方面展现出巨大潜力.本文系统评述了聚合物纳米药物载体的最新研究进展及在生物医药方面的应用.     

基于透明质酸构筑的药物递送载体及其应用

传统纳米药物控释载体主要通过细胞胞吞作用实现药物递送,其主要过程为被动靶向机制,因此会影响纳米载体在肿瘤组织的富集和治疗效果.近年来生物大分子透明质酸因其优异的水溶性、生物相容性、可降解性和肿瘤靶向性备受科研工作者青睐,已被广泛用于药物控释载体的构筑中,并成为靶向肿瘤治疗纳米载体领域的研究热点.本文根据透明质酸基纳米载...     

基于中空介孔二氧化硅小球的pH响应性控制释放系统

空心结构的介孔二氧化硅纳米材料具有较大的比表面积和孔容积,相对于传统介孔氧化硅材料可以负载更多的药物分子,在药物缓释领域具有广阔的应用前景.本文利用改进的模板法制备了粒径与壳厚度可控的中空介孔二氧化硅纳米小球.采用透射电镜(TEM)、小角X射线散射分析(SAXS)和氮气吸附-脱附等方法对合成的中空纳米二氧化硅小球进行了表征分析,得出最佳制备工艺条件.选择优化的制备条件得到的中空介孔二氧化硅与普通介孔二氧化硅对比,将两者分别负载一定量的染料分子罗丹明B(RhB),接着在两者表面修饰溶菌酶分子作为开关分子,构筑了两个pH响应的药物控制释放系统,并对两者的装载量进行了评估,通过观察在575 nm(RhB)处荧光发射峰强度的变化来评估两者的控制释放效果在相同的时间内,空心结构的介孔二氧化硅小球释放染料分子的量要明显多于普通介孔二氧化硅小球释放染料分子的量.     

多重响应性介孔二氧化硅纳米微球的制备及载药研究

采用溶胶凝胶法制备了以油酸稳定的Fe3O4为核, 十六烷基三甲基溴化铵(CTAB)为模板剂的磁响应性的介孔二氧化硅纳米微球; 通过孔道内修饰羧基和巯基, 链转移反应修饰线性的聚(N-异丙基丙烯酰胺-co-N-羟甲基丙烯酰胺)共聚物得到多重响应性的介孔二氧化硅纳米微球P(NIPAM-co-NHMA)@M-MSN(-COOH). 利用Brunauer-Emmett-Teller (BET)、振动样品磁强计(VSM)、透射电子显微镜(TEM)、紫外光谱(UV/Vis)表征了微球的物理化学性质. 阿霉素(DOX)被用作模型药物研究了这种多重响应性的介孔二氧化硅纳米微球作为药物载体的载药及药物释放行为, 结果显示这种纳米微球载药率高达48%, 药物释放呈现对温度和pH的双重响应性, 可以实现对药物的控制释放.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.