Irreversibility investigation of Casson fluid flow in an inclined channel subject to a Darcy-Forchheimer porous medium:a numerical study

The heat transfer and entropy generation characteristics of the magnetohydrodynamic Casson fluid flow through an inclined microchannel with convective boundary conditions are analyzed.Further,the effects of the viscous forces,Joule heating,heat source/sink,and radiation on the flow are taken into account.The non-dimensional transformations are used to solve the governing equations.Then,the reduced system is resolved by the fourth-fifth order Runge-Kutta-Fehlberg method along with the shooting technique.The effects of different physical parameters on the heat transfer and entropy generation are discussed in detail through graphs.From the perspective of numerical results,it is recognized that the production of entropy can be improved with the Joule heating,viscous dissipation,and convective heating aspects.It is concluded that the production of entropy is the maximum with increases in the Casson parameter,the angle of inclination,and the Hartmann number.Both the Reynolds number and the radiation parameter cause the dual impact on entropy generation.     

Hydromagnetic thin film flow of Casson fluid in non-Darcy porous medium with Joule dissipation and Navier's partial slip

In this paper, the effects of viscous and Ohmic heating and heat generation/absorption on magnetohydrodynamic flow of an electrically conducting Casson thin film fluid over an unsteady horizontal stretching sheet in a non-Darcy porous medium are investigated. The fluid is assumed to slip along the boundary of the sheet. Similarity transformation is used to translate the governing partial differential equations into ordinary differential equations. A shooting technique in conjunction with the 4 th order Runge-Kutta method is used to solve the transformed equations. Computations are carried out for velocity and temperature of the fluid thin film along with local skin friction coefficient and local Nusselt number for a range of values of pertinent flow parameters. It is observed that the Casson parameter has the ability to enhance free surface velocity and film thickness, whereas the Forchheimer parameter, which is responsible for the inertial drag has an adverse effect on the fluid velocity inside the film. The velocity slip along the boundary tends to decrease the fluid velocity. This investigation has various applications in engineering and in practical problems such as very large scale integration(VLSI) of electronic chips and film coating.     

Heat transfer analysis of Williamson fluid over exponentially stretching surface

This study explores the effects of heat transfer on the Williamson fluid over a porous exponentially stretching surface. The boundary layer equations of the Williamson fluid model for two dimensional flow with heat transfer are presented. Two cases of heat transfer are considered, i.e., the prescribed exponential order surface temperature （PEST） case and the prescribed exponential order heat flux （PEHF） case. The highly nonlinear partial differential equations are simplified with suitable similar and non-similar variables, and finally are solved analytically with the help of the optimal homotopy analysis method （OHAM）. The optimal convergence control parameters are obtained, and the physical fea- tures of the flow parameters are analyzed through graphs and tables. The skin friction and wall temperature gradient are calculated.     

Thermal radiation effect on a mixed convection flow and heat transfer of the Williamson fluid past an exponentially shrinking permeable sheet with a convective boundary condition

The thermal radiation effect on a steady mixed convective flow with heat transfer of a nonlinear (non-Newtonian) Williamson fluid past an exponentially shrinking porous sheet with a convective boundary condition is investigated numerically. In this study, both an assisting flow and an opposing flow are considered. The governing equations are converted into nonlinear ordinary differential equations by using a suitable transformation. A numerical solution of the problem is obtained by using the Matlab software package for different values of the governing parameters. The results show that dual nonsimilar solutions exist for the opposing flow, whereas the solution for the assisting flow is unique. It is also observed that the dual nonsimilar solutions exist only if a certain amount of mass suction is applied through the porous sheet, which depends on the Williamson parameter, convective parameter, and radiation parameter.     

Heat transfer and entropy generation analysis of non-Newtonian fluid flow through vertical microchannel with convective boundary condition

The entropy generation and heat transfer characteristics of magnetohydrodynamic(MHD) third-grade fluid flow through a vertical porous microchannel with a convective boundary condition are analyzed. Entropy generation due to flow of MHD non-Newtonian third-grade fluid within a microchannel and temperature-dependent viscosity is studied using the entropy generation rate and Vogel's model. The equations describing flow and heat transport along with boundary conditions are first made dimensionless using proper non-dimensional transformations and then solved numerically via the finite element method(FEM). An appropriate comparison is made with the previously published results in the literature as a limiting case of the considered problem.The comparison confirms excellent agreement. The effects of the Grashof number, the Hartmann number, the Biot number, the exponential space-and thermal-dependent heat source(ESHS/THS) parameters, and the viscous dissipation parameter on the temperature and velocity are studied and presented graphically. The entropy generation and the Bejan number are also calculated. From the comprehensive parametric study, it is recognized that the production of entropy can be improved with convective heating and viscous dissipation aspects. It is also found that the ESHS aspect dominates the THS aspect.     

Three-dimensional flow of a magnetohydrodynamic Casson fluid over an unsteady stretching sheet embedded into a porous medium

A three-dimensional flow of a magnetohydrodynamic Casson fluid over an unsteady stretching surface placed into a porous medium is examined. Similarity transformations are used to convert time-dependent partial differential equations into nonlinear ordinary differential equations. The transformed equations are then solved analytically by the homotopy analysis method and numerically by the shooting technique combined with the Runge–Kutta–Fehlberg method. The results obtained by both methods are compared with available reported data. The effects of the Casson fluid parameter, magnetic field parameter, and unsteadiness parameter on the velocity and local skin friction coefficients are discussed in detail.     

Entropy generation in flow field subjected to a porous block in a vertical channel

Entropy generation in the flow field subjected to a porous block situated in a vertical channel is examined. The effects of channel inlet port height (vertical height between channel inlet port and the block center), porosity, and block aspect ratio on the entropy generation rate due to fluid friction and heat transfer in the fluid are examined. The governing equations of flow, heat transfer, and entropy are solved numerically using a control volume approach. Air is used as the flowing fluid in the channel. A uniform heat flux is considered in the block and natural convection is accommodated in the analysis. It is found that entropy generation rate due to fluid friction increases with increasing inlet port height, while this increase becomes gradual for entropy generation rate due to heat transfer for the inlet port height exceeding 0.03 m. The porosity lowers entropy generation rate due to fluid friction and heat transfer. The effect of block aspect ratio on entropy generation rate is notable; in which case, entropy generation rate increases for the block aspect ratio of 1:2.     

Effect of slip velocity on Casson thin film flow and heat transfer due to unsteady stretching sheet in presence of variable heat flux and viscous dissipation

The aim of the present paper is to study flow and heat transfer characteristics of a viscous Casson thin film flow over an unsteady stretching sheet subject to variable heat flux in the presence of slip velocity condition and viscous dissipation. The governing equations are partial differential equations. They are reduced to a set of highly nonlinear ordinary differential equations by suitable similarity transformations. The resulting similarity equations are solved numerically with a shooting method. Comparisons with previous works are made, and the results are found to be in excellent agreement. In the present work, the effects of the unsteadiness parameter, the Casson parameter, the Eckert number, the slip velocity parameter, and the Prandtl number on flow and heat transfer characteristics are discussed. Also, the local skin-friction coefficient and the local Nusselt number at the stretching sheet are computed and discussed.     

Entropy analysis of unsteady magneto-nanofluid flow past accelerating stretching sheet with convective boundary condition

The unsteady laminar magnetohydrodynamics(MHD) boundary layer flow and heat transfer of nanofluids over an accelerating convectively heated stretching sheet are numerically studied in the presence of a transverse magnetic field with heat source/sink. The unsteady governing equations are solved by a shooting method with the Runge-KuttaFehlberg scheme. Three different types of water based nanofluids, containing copper, aluminium oxide, and titanium dioxide, are taken into consideration. The effects of the pertinent parameters on the fluid velocity, the temperature, the entropy generation number, the Bejan number, the shear stress, and the heat transfer rate at the sheet surface are graphically and quantitatively discussed in detail. A comparison of the entropy generation due to the heat transfer and the fluid friction is made with the help of the Bejan number. It is observed that the presence of the metallic nanoparticles creates more entropy in the nanofluid flow than in the regular fluid flow.     

Computational modeling of an MHD flow of a non-Newtonian fluid over an unsteady stretching sheet with viscous dissipation effects

An investigation has been conducted on the MHD Casson fluid and heat transfer over an unsteady stretching sheet with viscous dissipation effects. With suitable dimensionless variables, partial differential equations are reduced to ordinary differential equations, which are then solved by the homotopy analysis method. Dependences of flow characteristics on various parameters involved into the equations are obtained.     

Flow of Casson fluid with nanoparticles

The boundary layer flow of a Casson fluid due to a stretching cylinder is discussed in the presence of nanoparticles and thermal radiation. All physical properties of the Casson fluid except the thermal conductivity are taken constant. Appropriate transformations yield the nonlinear ordinary differential systems. Convergent series solutions are developed and analyzed. The numerical results for the local Nusselt and Sherwood numbers are demonstrated. It is found that an increase in the strength of the Brownian motion decays the temperature noticeably. However, the rate of heat transfer and the concentration of the nanoparticles at the surface increase for larger Brownian motion parameters.     

Flow of variable thermal conductivity fluid due to inclined stretching cylinder with viscous dissipation and thermal radiation

The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effects. The temperature dependent thermal conductivity of the Casson fluid is considered. The relevant equations are first simplified under usual boundary layer assumptions, and then transformed into ordinary differential equations by suitable transformations. The transformed ordinary differential equations are computed for the series solutions of velocity and temperature. A convergence analysis is shown explicitly. Velocity and temperature fields are discussed for different physical parameters by graphs and numerical values. It is found that the velocity decreases with the increase in the angle of inclination while increases with the increase in the mixed convection parameter. The enhancement in the thermal conductivity and radiation effects corresponds to a higher fluid temperature. It is also found that heat transfer is more pronounced in a cylinder when it is compared with a flat plate. The thermal boundary layer thickness increases with the increase in the Eckert number. The radiation and variable thermal conductivity decreases the heat transfer rate at the surface.     

Numerical studies for flow and heat transfer of the Powell-Eyring fluid thin film over an unsteady stretching sheet with internal heat generation using the chebyshev finite difference method

An analysis is carried out to study the unsteady two-dimensional Powell-Eyring flow and heat transfer to a laminar liquid film from a horizontal stretching surface in the presence of internal heat generation. The flow of a thin fluid film and subsequent heat transfer from the stretching surface is investigated with the aid of a similarity transformation. The transformation enables to reduce the unsteady boundary layer equations to a system of nonlinear ordinary differential equations. A numerical solution of the resulting nonlinear differential equations is found by using an efficient Chebyshev finite difference method. A comparison of numerical results is made with the earlier published results for limiting cases. The effects of the governing parameters on the flow and thermal fields are thoroughly examined and discussed.     

Heat transfer in flow of nonlinear fluids with viscous dissipation

The rotational flow of viscoplastic fluids between concentric cylinders is examined while dissipation due to viscous effects through the energy balance. The viscosity of fluid is simultaneously dependent on shear rate and temperature. Exponential dependence of viscosity on temperature is modeled through Nahme law, and the shear dependency is modeled according to the Carreau equation. Hydrodynamically, stick boundary conditions are applied, and thermally, both constant temperature and constant heat flux on the exterior of cylinders are considered. The governing motion and energy balance equations are coupled adding complexity to the already highly correlated set of differential equations. Introduction of Nahme number has resulted in a nonlinear base flow between the cylinders. As well, the condition of constant heat flux has moved the point of maximum temperature toward the inner cylinder. Taking viscous heating into account, the effects of parameters such as Nahme and Brinkman numbers, material time and pseudoplasticity constant on the stability of the flow are investigated. Moreover, the study shows that the total entropy generation number decreases as the fluid elasticity increases. It, however, increases with increasing Nahme and Brinkman numbers.     

Entropy generation during fluid flow in a channel under the effect of transverse magnetic field

Entropy generation due to fluid flow and heat transfer inside a horizontal channel made of two parallel plates under the effect of transverse magnetic field is numerically investigated. The flow is assumed to be steady, laminar, hydro-dynamically and thermally fully developed of electrically conducting fluid. Both horizontal walls are maintained at constant temperatures higher than that of the fluid. The governing equations in Cartesian coordinate are solved by an implicit finite difference technique. After the flow field and the temperature distributions are obtained, the entropy generation profiles are computed and presented graphically. The factors, which were found to affect the problem under consideration are the magnetic parameter, Eckert number, Prandtl number, and the temperature parameter (θ_∞). It was found that, entropy generation increased as all parameters involved in the present problem increased.     

Fractional four-step finite element method for analysis of thermally coupled fluid-solid interaction problems

An integrated fluid-thermal-structural analysis approach is presented. In this approach, the heat conduction in a solid is coupled with the heat convection in the viscous flow of the fluid resulting in the thermal stress in the solid. The fractional four-step finite element method and the streamline upwind Petrov-Galerkin (SUPG) method are used to analyze the viscous thermal flow in the fluid. Analyses of the heat transfer and the thermal stress in the solid are performed by the Galerkin method. The second-order semiimplicit Crank-Nicolson scheme is used for the time integration. The resulting nonlinear equations are linearized to improve the computational efficiency. The integrated analysis method uses a three-node triangular element with equal-order interpolation functions for the fluid velocity components, the pressure, the temperature, and the solid displacements to simplify the overall finite element formulation. The main advantage of the present method is to consistently couple the heat transfer along the fluid-solid interface. Results of several tested problems show effiectiveness of the present finite element method, which provides insight into the integrated fluid-thermal-structural interaction phenomena.     

Entropy generation of radiation effect on laminar-mixed convection along a wavy surface

The effects of thermal radiation on laminar-forced and free convection along the wavy surface are studied. The optically thick limit approximation for the radiation flux is assumed. A modified form for the entropy generation equation is derived. The effect of geometry (e.g. flat surface, wavy surface), fluid friction and heat transfer (e.g. convection and radiation effects) are all included in the modified entropy generation form. Prandtl’s transposition theorem is used to stretch the ordinary coordinate system in certain directions. The wavy surface can be transformed into a calculable planar coordinate system. The governing equations are derived from the complete Navier–Stokes equations. A simple transformation is proposed to transform the governing equations into boundary layer equations for solution by the cubic spline collocation method.     

Effects of temperature dependent fluid properties and variable Prandtl number on the transient convective flow due to a porous rotating disk

In this paper we have studied the effects of temperature dependent fluid properties such as density, viscosity and thermal conductivity and variable Prandtl number on unsteady convective heat transfer flow over a porous rotating disk. Using similarity transformations we reduce the governing nonlinear partial differential equations for flow and heat transfer into a system of ordinary differential equations which are then solved numerically by applying Nachtsheim–Swigert shooting iteration technique along with sixth-order Runge–Kutta integration scheme. Comparison with previously published work for steady case of the problem were performed and found to be in very good agreement. The obtained numerical results show that the rate of heat transfer in a fluid of constant properties is higher than in a fluid of variable properties. The results further show that consideration of Prandtl number as constant within the boundary layer for variable fluid properties lead unrealistic results. Therefore, modeling thermal boundary layers with temperature dependent fluid properties Prandtl number must treated as variable inside the boundary layer.     

Effects of heat and mass transfer peristaltic flow of?Williamson fluid in a vertical annulus

In the present investigation, we have studied the effects of mixed convection heat and mass transfer on peristaltic flow of Williamson fluid model in a vertical annulus. The governing equations of Williamson fluid model are simplified using the assumptions of long wavelength and low Reynold’s number. An approximated analytical and numerical solutions are found for the velocity field using (i) Perturbation method (ii) Shooting method. The comparisons of analytical and numerical solutions have been presented. The expressions for pressure rise, velocity against various physical parameter are discussed through graphs.     

Entropy generation due to natural convection in a partially heated cavity by local RBF-DQ method

The Local Radial Basis Function-Differential Quadrature (RBF-DQ) method is applied to two-dimensional incompressible Navier-Stokes equations in primitive form. Numerical results of heatlines and entropy generation due to heat transfer and fluid friction have been obtained for laminar natural convection. The variations of the entropy generation for different Rayleigh numbers are also investigated. Comparison between the present results and previous works demonstrated excellent agreements which verify the accuracy and flexibility of the method in simulating the fluid mechanics and heat transfer problems.