Uniform indentation of the elastic half-space by a rigid rectangular punch

The problem considered is that of a rigid flat-ended punch with rectangular contact area pressed into a linear elastic half-space to a uniform depth. Both the lubricated and adhesive cases are treated. The problem reduces to solving an integral equation (or equations) for the contact stresses. These stresses have a singular nature which is dealt with explicitly by a singularity-incorporating finite-element method. Values for the stiffness of the lubricated punch and the adhesive punch are determined: the effect of adhesion on the stiffness is found to be small, producing an increase of the order of 3%.     

功能梯度材料涂层半空间的轴对称光滑接触问题

求解了功能梯度材料涂层半空间的轴对称光滑接触问题,其中梯度层剪切模量按照线性变化,利用Hankel积分变换方法求解微分方程,将问题化为具有Cauchy型奇异核的积分方程.数值方法求解表明:功能梯度材料涂层半空间在刚性柱形压头和球形压头作用下,接触表面分布应力,接触半径以及最大压痕受材料梯度效应的影响较大.     

The contact problem of electroelasticity for a flat punch with parabolic cross-section

The solution of the problem of a rigid punch with a parabolic cross-section and flat base that is forced into an elastic piezoelectric ceramic half-space is derived in explicit form. The punch is somewhat displaced, being parallel to the isotropy plane that coincides with the boundary surface of the half-space. The symmetry axis coincides with the direction of the force lines of the field with the previous polarization. Formulas are derived to determine the stresses on the surface of the half-space under the punch and the components of the conjugate electric field for certain boundary conditions on the contact area. S. P. Timoshenko Institute of Mechanics, National Academy of Sciences of Ukraine, Kiev. Translated from Prikladnaya Mekhanika, Vol. 35, No. 11, pp. 20–26, November, 1999.     

DYNAMIC CONTACT STIFFNESS OF VIBRATING RIGID SPHERE CONTACTING SEMI-INFINITE TRANSVERSELY ISOTROPIC VISCOELASTIC SOLID

Dynamic contact stiffness at the interface between a vibrating rigid sphere and a semi-infinite transversely isotropic viscoelastic solid is investigated. An oscillating force superimposed onto a static compressive force in the vertical direction excites the vibration of a rigid sphere, which causes variable contact radius and contact pressure distribution in the contact region. The assumption of a sufficiently small oscillating force yields a dynamic contact-pressure distribution of a constant contact radius, which gives dynamic contact stiffness at the interface between the rigid sphere and the semi-infinite solid. Numerical calculations show the influence of vibration frequency of the sphere, and elastic constants of the transversely isotropic solid on dynamic contact stiffness, which benefits quantitative evaluation of elastic constants and orientation of single hexagonal grains by resonance-frequency shifts of the oscillator in resonance ultrasound microscopy.     

Effect of anisotropy on thermoelastic contact problem

This paper is concerned with the stationary plane contact of an insulated rigid punch and a half-space which is elastically anisotropic but thermally conducting. The frictional heat generation inside the contact region due to the sliding of the punch over the half-space surface and the heat radiation outside the contact region are taken into account. With the help of Fourier integral transform, the problem is reduced to a system of two singular integral equations. The equations are solved numerically by using Gauss-Jacobi and trapezoidal-rule quadratures. The effects of anisotropy and thermal effects are shown graphically.     

Action of an elliptic punch on a transversally isotropic half-space

The 3D contact problem on the action of a punch elliptic in horizontal projection on a transversally isotropic elastic half-space is considered for the case in which the isotropy planes are perpendicular to the boundary of the half-space. The elliptic contact region is assumed to be given (the punch has sharp edges). The integral equation of the contact problem is obtained. The elastic rigidity of the half-space boundary characterized by the normal displacement under the action of a given lumped force significantly depends on the chosen direction on this boundary. In this connection, the following two cases of location of the ellipse of contact are considered: it can be elongated along the first or the second axis of Cartesian coordinate system on the body boundary. Exact solutions are obtained for a punch with base shaped as an elliptic paraboloid, and these solutions are used to carry out the computations for various versions of the five elastic constants. The structure of the exact solution is found for a punch with polynomial base, and a method for determining the solution is proposed.     

The stress on an elastic half-space due to sectionally smooth-ended punch

The axisymmetric contact problem for an elastic half-space and a rigid punch is considered using integral transform methods. The end of the punch is sectionally smooth and there is incomplete penetration. The normal stress under the punch is calculated and found to have an elliptic integral type of singularity.     

New Solution of Axisymmetric Contact Problem of Elasticity

We consider two problems of elasticity, namely, the Boussinesq problem about the action of a lumped force on a half-space and the related problem about the interaction of the half-space with a cylindrical rigid punch with plane base. In the classical statement, these problems have singular solutions. In the Boussinesq problem, the displacement under the action of the force is infinitely large, and in the punch problem, the infinitely large variable is the pressure on the punch boundary. In the present paper, these problems are solved with the use of relations of generalized elasticity derived regarding a medium element of small but finite dimensions rather than a traditional infinitesimal element. The structure parameter of the medium contained in the solutions can be determined experimentally. The obtained generalized solutions of the problems under study are regular.     

The axisymmetric torsional contact problem of a functionally graded piezoelectric coated half-space

In this article, we study the axisymmetric tor-sional contact problem of a half-space coated with func-tionally graded piezoelectric material (FGPM) and subjected to a rigid circular punch. It is found that, along the thick-ness direction, the electromechanical properties of FGPMs change exponentially. We apply the Hankel integral trans-form technique and reduce the problem to a singular integral equation, and then numerically determine the unknown con-tact stress and electric displacement at the contact surface. The results show that the surface contact stress, surface azimuthal displacement, surface electric displacement, and inner electromechanical field are obviously dependent on the gradient index of the FGPM coating. It is found that we can adjust the gradient index of the FGPM coating to modify the distributions of the electric displacement and contact stress.     

Plastic deformation of a wedge by a sliding punch

We present a self-similar solution of the problem of deformation of an ideally plastic wedge by a sliding punch with regard to contact friction; such a solution generalizes the well-known solutions of the problem of wedge penetration into a plastic half-space and of compression of an ideally plastic wedge by a plane punch. The problem is of interest for modeling the processes of plastic deformation of rough surfaces of metal pieces by a rigid tool.     

Contact problem for an orthotropic half-space

Numerical and analytical solutions of the 3D contact problem of elasticity on the penetration of a rigid punch into an orthotropic half-space are obtained disregarding the friction forces.A numericalmethod ofHammerstein-type nonlinear boundary integral equations was used in the case of unknown contact region, which permits determining the contact region and the pressure in this region. The exact solution of the contact problem for a punch shaped as an elliptic paraboloid was used to debug the program of the numerical method. The structure of the exact solution of the problem of indentation of an elliptic punch with polynomial base was determined. The computations were performed for various materials in the case of the penetration of an elliptic or conical punch.     

Two-dimensional sliding frictional contact of functionally graded materials

A multi-layered model for sliding frictional contact analysis of functionally graded materials (FGMs) with arbitrarily varying shear modulus under plane strain-state deformation has been developed. Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into several sub-layers and in each sub-layers the shear modulus is assumed to be a linear function while the Poisson's ratio is assumed to be a constant. In the contact area, it is assumed that the friction is one of Coulomb type. With this model the fundamental solutions for concentrated forces acting perpendicular and parallel to the FGMs layer surface are obtained. Then the sliding frictional contact problem of a functionally graded coated half-space is investigated. The transfer matrix method and Fourier integral transform technique are employed to cast the problem to a Cauchy singular integral equation. The contact stresses and contact area are calculated for various moving stamps by solving the equations numerically. The results show that appropriate gradual variation of the shear modulus can significantly alter the stresses in the contact zone.     

Contact Problem for a Rectangular Punch on the Porous Elastic Half-Space

The paper is concerned with a contact problem about rigid rectangular punch forced into a half-space made of a linear elastic isotropic material with voids. We use a Cowin–Nunziato model for the half-space, and reduce the problem to a double Fredholm integral equation of the first kind. Then we apply two different approaches, to solve this equation. The first one is based on a direct collocation numerical technique. The second method is asymptotic, and we use a small parameter that is the relative width of the punch. Finally, compliance of the punch is determined, and results of the two different methods are compared with each other, as well as with a Sivashinsky–Panek–Kalker solution. Mathematics Subject Classifications (2000) 74M15.     

Frictional Hertzian contact problems under cyclic loading using static reduction

In this study we investigate an axisymmetric Hertzian contact problem of a rigid sphere pressing into an elastic half-space under cyclic loading. A numerical solution is sought to obtain a steady state, which demands a large amount of computer memory and computing speed. To achieve a tractable problem, the current numerical model uses a “static reduction” technique, which employs only a contact stiffness matrix rather than the entire stiffness of the problem and is more accurate than the approach used by most finite element codes. Investigation of the tendency of contact behavior in the transient and steady states confirms that a steady state exists, showing converged energy dissipation. The dependence of dissipation on load amplitude shows a power law of load amplitude less than 3, which may explain some deviations in the experimental findings.     

Axisymmetric frictionless contact of functionally graded materials

The main interest of this study is a new method to solve the axisymmetric frictionless contact problem of functionally graded materials (FGMs). Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into a series of sub-layers with shear modulus varying linearly in each sub-layer and continuous at the sub-interfaces. With this model, the axisymmetric frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Hankel integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically. An erratum to this article can be found at     

Effect of friction on subsurface stresses in sliding line contact of multilayered elastic solids

A numerical integral scheme based on Fourier transformation approach is employed to investigate the effect of friction on subsurface stresses arising from the two-dimensional sliding contact of two multilayered elastic solids. The analysis incorporates bonded and unbonded interface boundary conditions between the coating layers. Two line contact problems are presented. The first one is the contact problem between a rigid cylinder and a two-layer half space and the second one is the indentation of a multilayered elastic half-space by a flat rigid punch. The effects of the surface coating on the contact pressure distribution and subsurface stress field are presented and discussed.     

Determination of optimal shape of a moving punch with friction taken into account

The optimization problem for the contact interaction between a rigid punch and an elasticmediumis considered. It is assumed that that the punch is under the action of some prescribed forces and momenta and moves along a surface bounding a half-space filled with an elastic medium. It is also assumed that themotion is quasistatic and the friction forces arising in the region of contact are taken into account. The punch shape is considered as the desired design variable, and the integral functional characterizing the discrepancy between the pressure distribution in the region of contact that corresponds to the optimized shape of the punch and a given goal distribution of pressure is taken as the minimizing criterion. The optimal shape can be determined efficiently by solving the following two problems: first, to obtain the optimal pressure distribution and then to solve a boundary value problemfor the elastic half-space under the action of the obtained normal pressure and friction forces. By way of example, the optimal shape is analytically determined for a punch of rectangular shape in horizontal projection.     

Two-dimensional contact mechanics of functionally graded materials with arbitrary spatial variations of material properties

A multi-layered model for frictionless contact analysis of functionally graded materials (FGMs) with arbitrarily varying elastic modulus under plane strain-state deformation has been developed. Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into several sub-layers and in each sub-layers the shear modulus is assumed to be linear function while the Poisson’s ratio is assumed to be a constant. With the model, the frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Fourier integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically.     

Torsion of rough elastic half-space by rigid punch

Torsion of an elastic half-space by a rigid punch is investigated. The boundary of the half-space is assumed to be rough. Two geometries of the punch-parabolic and flat end are considered. It is shown that the contact area consists of stick and slip zones. This fact, which is well-known in the classical torsional contact of the elastic half-space with the smooth surface and the parabolic punch, also holds true for the flat-ended punch if the boundary roughness is involved. The partial slip problems are reduced to the integral equations, which are solved numerically. The presented results show the effects of boundary roughness on the shear stresses, size of the stick area and the relation between the twisting moment and the angle of twist.     

Plane contact problem for periodic laminated composite involving frictional heating

Summary The stationary problem of a rigid thermally insulated punch sliding over the boundary surface of a periodic two-layered thermoelastic half-space is considered. The heat generated in the contact area is assumed to be caused by frictional forces. The problem is formulated within the framework of thermoelasticity with microlocal parameters, and it is reduced to a system of two integral equations, which is solved numerically. The effects connected with the composite structure are analyzed.