Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.     

Effects of Thermal Radiation on a 3D Sisko Fluid over a Porous Medium Using Cattaneo-Christov Heat Flux Model

This paper investigates the three-dimensional flow of a Sisko fluid over a bidirectional stretching sheet, in a porous medium. By using the effect of Cattaneo-Christov heat flux model, heat transfer analysis is illustrated. Using similarity transformation the governing partial differential equations are transferred into a system of ordinary differential equations that are solved numerically by applying Nachtsheim-Swigert shooting iteration technique along with the 6-th order Runge-Kutta integration scheme. The effect of various physical parameters such as Sisko fluid, ratio parameter, thermal conductivity, porous medium, radiation parameter, Brownian motion, thermophoresis, Prandtl number, and Lewis number are graphically represented.     

Impact of melting heat transfer in the time-dependent squeezing nanofluid flow containing carbon nanotubes in a Darcy-Forchheimer porous media with Cattaneo-Christov heat flux

This study aims to investigate the time-dependent squeezing of nanofluid flow, comprising carbon nanotubes of dual nature, e.g. single-walled carbon nanotubes, and multi-walled carbon nanotubes,between two parallel disks. Numerical simulations of the proposed novel model are conducted,accompanied by Cattaneo-Christov heat flux in a Darcy-Forchheimer permeable media. Additional impacts of homogeneous–heterogeneous reactions are also noted, including melting heat. A relevant transformation procedure is implemented for the transition of partial differential equations to the ordinary variety. A computer software-based MATLAB function, bvp4c, is implemented to handle the envisioned mathematical model. Sketches portraying impacts on radial velocity, temperature, and concentration of the included parameters are given, and deliberated upon. Skin friction coefficient and local Nusselt number are evaluated via graphical illustrations. It is observed that the local inertia coefficient has an opposite impact on radial velocity and temperature field. It is further perceived that melting and radiation parameters demonstrate a retarding effect on temperature profile.     

Effects of non‐extensive electrons on the sheath of dusty plasmas with variable dust charge

In this study, a detailed investigation of the problem of sheath is presented using the fluid model in a magnetized three‐component dusty plasma system comprising positive ions, dust grains with variable charge and q‐non‐extensive electrons (i.e., the electrons evolve far away from their Maxwellian thermodynamic equilibrium [q = 1]). The effects of q‐non‐extensivity parameter on the plasma sheath parameters are studied numerically. A significant change is observed in the quantities characterizing the sheath with the presence of the super‐extensive electrons (q < 1) and sub‐extensive electrons (q > 1). In addition, based on the orbital motion limited theory, by taking various forces acting on the dust particle into consideration, the dynamics of the dust located within the sheath, that is, the dust grain charging inside the sheath, is examined under different values of q. It is found that the q‐non‐extensivity has affected significantly the dynamics and the charging process of the dust grains in the sheath.     

Combined effects of holes and winglets on chevron plate-fins to enhance the performance of a plate-fin heat exchanger working with nanofluid

ABSTRACT

The current work reports an experimental study on hydrothermal improvement in a chevron plate-fin heat exchanger combined with holes and winglets. The experiments are performed for water flow through a test square duct fitted with enhanced chevron plate-fins for the Reynolds number from 4000 to 10000. Characteristics of the enhanced chevron plate-fins include three waviness aspect ratios and four different arrangements of holes and winglets at a constant diameter of holes and width/height of winglets. An overall performance factor is applied to obtain the optimal geometry. Then, only the optimal geometries are applied to find out the effect of Al₂O₃/water nanofluid flow on the performance of a plate-fin heat exchanger. In comparison to simple chevron plate-fins, the enhanced ones would increase the Nusselt number by a factor between 1.05% and 1.6%. In addition, simultaneous application of the optimal enhanced chevron plate-fins and the nanofluid could increase the Nusselt number. The best working conditions of this system are detected for the nanofluid at a weight fraction of 0.3%.     

Exact solutions for the flow of Casson fluid over a stretching surface with transpiration and heat transfer effects

The effects of transpiration on forced convection boundary layer non-Newtonian fluid flow and heat transfer toward a linearly stretching surface are reported.The flow is caused solely by the stretching of the sheet in its own plane with a velocity varying linearly with the distance from a fixed point.The constitutive relationship for the Casson fluid is used.The governing partial differential equations corresponding to the momentum and energy equations are converted into non-linear ordinary differential equations by using similarity transformations.Exact solutions of the resulting ordinary differential equations are obtained.The effect of increasing Casson parameter,i.e.,with decreasing yield stress(the fluid behaves as a Newtonian fluid as the Casson parameter becomes large),is to suppress the velocity field.However,the temperature is enhanced as the Casson parameter increases.It is observed that the effect of transpiration is to decrease the fluid velocity as well as the temperature.The skin-friction coefficient is found to increase as the transpiration parameter increases.     

Effect of the ion slip on the MHD flow of a dusty fluid with heat transfer under exponential decaying pressure gradient

In the present study, the unsteady Hartmann flow with heat transfer of a dusty viscous incompressible electrically conducting fluid under the influence of an exponentially decreasing pressure gradient is studied without neglecting the ion slip. The parallel plates are assumed to be porous and subjected to a uniform suction from above and injection from below while the fluid is acted upon by an external uniform magnetic field applied perpendicular to the plates. The equations of motion are solved analytically to yield the velocity distributions for both the fluid and dust particles. The energy equations for both the fluid and dust particles including the viscous and Joule dissipation terms, are solved numerically using finite differences to get the temperature distributions.     

The effects of different nano particles of Al2O3 and Ag on the MHD nano fluid flow and heat transfer in a microchannel including slip velocity and temperature jump

The forced convection of nanofluid flow in a long microchannel is studied numerically according to the finite volume approach and by using a developed computer code. Microchannel domain is under the influence of a magnetic field with uniform strength. The hot inlet nanofluid is cooled by the heat exchange with the cold microchannel walls. Different types of nanoparticles such as Al₂O₃ and Ag are examined while the base fluid is considered as water. Reynolds number are chosen as Re=10 and Re=100. Slip velocity and temperature jump boundary conditions are simulated along the microchannel walls at different values of slip coefficient for different amounts of Hartmann number. The investigation of magnetic field effect on slip velocity and temperature jump of nanofluid is presented for the first time. The results are shown as streamlines and isotherms; moreover the profiles of slip velocity and temperature jump are drawn. It is observed that more slip coefficient corresponds to less Nusselt number and more slip velocity especially at larger Hartmann number. It is recommended to use Al₂O₃-water nanofluid instead of Ag-water to increase the heat transfer rate from the microchannel walls at low values of Re. However at larger amounts of Re, the nanofluid composed of nanoparticles with higher thermal conductivity works better.     

Comment on “Thermal radiation effects on MHD flow of a micropolar fluid over a stretching surface with variable thermal conductivity”, by Mostafa A.A. Mahmoud [Physica A 375 (2007) 401-410]

In the present comment we point out some errors found in the above referenced paper.