Electroactive Films of Alternately Layered Polycations and Iron-Sulfur Protein Putidaredoxin on Gold

Layered, electrochemically active films of bacterial iron-sulfur protein putidaredoxin (Pdx) and poly(dimethyldiallyammonium) (PDDA) polycations were constructed on gold electrodes coated with mercaptopropane sulfonate (MPS) and on quartz slides. Second-derivative UV-vis spectra suggested similar structures of Pdx in films and solutions at pH 7. Direct electrochemistry was achieved between Pdx and gold electrodes in these films, with significantly better electrochemical reversibility than in cast Nafion-lipid-Pdx films. A formal potential dispersion model gave a good fit to square wave voltammograms by regression analysis and was used to estimate an average apparent rate constant of 4.5 s(-1). Reduced Pdx in the polyion films did not react with its natural redox partner cytochrome P450(cam) because of unfavorable thermodynamics in the film environment. Copyright 2000 Academic Press.     

Enhanced electron transfer and lauric acid hydroxylation by site-directed mutagenesis of CYP119

CYP119, a cytochrome P450 from a thermophilic organism for which a crystal structure is available, is shown here to hydroxylate lauric acid in a reaction supported by putidaredoxin and putidaredoxin reductase. This fatty acid hydroxylation activity is increased 15-fold by T214V and D77R mutations. The T214V mutation increases the rate by facilitating substrate binding and enhancing the associated spin state change, whereas the D77R mutation improves binding of the heterologous redox partner putidaredoxin to CYP119 and the rate of electron transfer from it to the heme group. A sequence alignment with P450(cam) can, therefore, be used to identify a part of the binding site for putidaredoxin on an unrelated P450 enzyme. This information can be used to engineer by mutagenesis an improved complementarity of the protein-protein interface that results in improved electron transfer from putidaredoxin to the P450 enzyme. As a result, the catalytic activity of the thermo- and barostable CYP119 has been incorporated into a catalytic system that hydroxylates fatty acids.     

Detection of a high-barrier conformational change in the active site of cytochrome P450cam upon binding of putidaredoxin

The orientation of the substrate camphor in the active site of reduced CO-bound cytochrome P450cam (CYP101) as a function of reduced putidaredoxin (Pdxr) addition has been examined by NMR using perdeuterated CYP101 and perdeuterated Pdx as well as isotopically labeled d-camphor. This permits the 1H resonances of CYP101-bound camphor to be observed without interference from the signals of CYP101 or Pdx and confirms assignments of the methyl signals of camphor in the bound form. The Cys4Fe2S2 ferredoxin Pdx is the physiological redox partner and effector of CYP101. The addition of Pdx to the reduced CYP101-camphor-CO complex results in a conformational selection that is slow on the chemical shift time scale with spectral effects observed primarily at the 8-CH3 group of the camphor. The camphor signals are ring current shifted by the heme, and for the 9- and 10-CH3 resonances, these shifts are reasonably well predicted by ring current calculations from the crystal structure of CO-bound CYP101. However, in the absence of Pdx, the 8-CH3 resonance of CYP101-bound camphor is observed at considerably higher field than predicted. Dynamic simulations using ring current shift restraints generated a structure with low chemical shift violations in which the hydrogen bond between the camphor carbonyl oxygen and the OH of Tyr96 is lost, and an expansion of the active site takes place that permits reorientation of the camphor within the active site.     

Butane and propane oxidation by engineered cytochrome P450cam

The haem monooxygenase cytochrome P450cam has been engineered to oxidise the gaseous alkanes butane and propane to butan-2-ol and propan-2-ol, respectively, by the use of bulky amino acid substitutions to reduce the volume of the substrate pocket and thus improve the enzyme-substrate fit: the F87W/Y96F/T101L/V247L mutant oxidizes butane with a turnover rate of 750 min-1 and 95% yield based on NADH consumed while the wild-type enzyme has an activity of 0.4 min-1 with 4% yield.     

Higher order structure of proteins solubilized in AOT reverse micelles

The higher order structure of proteins solubilized in an bis(2-ethylhexyl) sulfosuccinate sodium (AOT) reverse micellar system was investigated. From circular dichroic (CD) measurement, CD spectra of cytochrome c, which is solubilized at the interface of reverse micelles, markedly changed on going from buffer solution to the reverse micellar solution, and the ellipticity values in the far- and near-UV regions decreased with decreasing the water content (W₀: molar ratio of water to AOT), indicating that the secondary and tertiary structures of cytochrome c changed with the water content. The ellipticity of ribonuclease A, which is solubilized in the center of micellar water pool, in the near-UV region was dependent on W₀ and became minimum when W₀ of ca. 8 while the ellipticity in the far-UV region was almost constant, indicating that the tertiary structure of ribonuclease A was affected by the water content, but the secondary structure was conserved. The degree of curvature of the micellar interface appears to influence the protein structure because the reverse micelle size is linearly proportional to the W₀ value. As evidence of this, when the micelle size was comparable to the protein's dimensions, the structures were more affected by the water content. Judging from the dependence of the factor influencing the protein structure on the protein species, the location of solubilized protein in reverse micelles is significantly related to whether the protein structure in the system is affected by the micellar interface. In the cases of cytochrome c and lysozyme, the ellipticity against W₀ was dependent on the AOT concentration. In contrast, ribonuclease A gave very similar ellipticity values whatever the AOT concentration. In the n-hexane micellar system, cytochrome c exhibited lower ellipticity values and ribonuclease A in the lower W₀ range (W₀ < ca. 8) higher ellipticity values. These results indicated that the interaction between the protein and the micellar interface is a dominant factor influencing the protein structure in reverse micelles, and that it is governed by the location of solubilized proteins and the state of the micellar interface.     

Roles of the proximal heme thiolate ligand in cytochrome p450(cam).

To examine the roles of the proximal thiolate iron ligand, the C357H mutant of P450(cam) (CYP101) was characterized by resonance Raman, UV, circular dichroism, and activity measurements. The C357H mutant must be reconstituted with hemin for activity to be observed. The reconstituted enzyme is a mixture of high and low spin species. Low temperature (10 degrees C), low enzyme concentration (1 microM), high camphor concentration (1 mM), and 5--50 mM buffer concentrations increase the high to low spin ratio, but under no conditions examined was the protein more than 60% high spin. The C357H mutant has a poorer K(m) for camphor (23 vs 2 microM) and a poorer K(d) for putidaredoxin (50 vs 20 microM) than wild-type P450(cam). The mutant also exhibits a greatly decreased camphor oxidation rate, elevated uncoupling rate, and much greater peroxidase activity. Electron transfer from putidaredoxin to the mutant is much slower than to the wild-type even though redox potential measurements show that the electron transfer remains thermodynamically favored. These experiments confirm that the thiolate ligand facilitates the O--O bond cleavage by P450 enzymes and also demonstrate that this ligand satisfies important roles in protein folding, substrate binding, and electron transfer.     

Regioselective ω-hydroxylation of medium-chain n-alkanes and primary alcohols by CYP153 enzymes from Mycobacterium marinum and Polaromonas sp. strain JS666

The oxofunctionalization of saturated hydrocarbons is an important goal in basic and applied chemistry. Biocatalysts like cytochrome P450 enzymes can introduce oxygen into a wide variety of molecules in a very selective manner, which can be used for the synthesis of fine and bulk chemicals. Cytochrome P450 enzymes from the CYP153A subfamily have been described as alkane hydroxylases with high terminal regioselectivity. Here we report the product yields resulting from C(5)-C(12) alkane and alcohol oxidation catalyzed by CYP153A enzymes from Mycobacterium marinum (CYP153A16) and Polaromonas sp. (CYP153A P. sp.). For all reactions, byproduct formation is described in detail. Following cloning and expression in Escherichia coli, the activity of the purified monooxygenases was reconstituted with putidaredoxin (CamA) and putidaredoxin reductase (CamB). Although both enzyme systems yielded primary alcohols and α,ω-alkanediols, each one displayed a different oxidation pattern towards alkanes. For CYP153A P. sp. a predominant ω-hydroxylation activity was observed, while CYP153A16 possessed the ability to catalyze both ω-hydroxylation and α,ω-dihydroxylation reactions.     

An evaluation of molecular models of the cytochrome P450 Streptomyces griseolus enzymes P450SU1 and P450SU2

Summary P450SU1 and P450SU2 are herbicide-inducible bacterial cytochrome P450 enzymes from Streptomyces griseolus. They have two of the highest sequence identities to camphor hydroxylase (P450cam from Pseudomonas putida), the cytochrome P450 with the first known crystal structure. We have built several models of these two proteins to investigate the variability in the structures that can occur from using different modeling protocols. We looked at variability due to alignment methods, backbone loop conformations and refinement methods. We have constructed two models for each protein using two alignment algorithms, and then an additional model using an identical alignment but different loop conformations for both buried and surface loops. The alignments used to build the models were created using the Needleman-Wunsch method, adapted for multiple sequences, and a manual method that utilized both a dotmatrix search matrix and the Needleman-Wunsch method. After constructing the initial models, several energy minimization methods were used to explore the variability in the final models caused by the choice of minimization techniques. Features of cytochrome P450cam and the cytochrome P450 superfamily, such as the ferredoxin binding site, the heme binding site and the substrate binding site were used to evaluate the validity of the models. Although the final structures were very similar between the models with different alignments, active-site residues were found to be dependent on the conformations of buried loops and early stages of energy minimization. We show which regions of the active site are the most dependent on the particular methods used, and which parts of the structures seem to be independent of the methods.     

CYP119 plus a Sulfolobus tokodaii strain 7 ferredoxin and 2-oxoacid:ferredoxin oxidoreductase constitute a high-temperature cytochrome P450 catalytic system

The cytochrome P450 superfamily of enzymes catalyzes a broad range of oxidative processes involved in the metabolism of fatty acids, biosynthesis of sterols, and elimination of drugs and xenobiotics. Application of the unique properties of P450 enzymes as fine biocatalysts in biotechnology is limited due to their thermal instability and the requirement for auxiliary electron-donor proteins and cofactors. CYP119, a thermophilic P450 enzyme from Sulfolobus solfataricus, was characterized some time ago, but no high-temperature redox partners have been available for it. Here we report reconstitution of CYP119 with a novel high-temperature electron-donor system consisting of a ferredoxin and 2-oxoacid:ferredoxin oxidoreductase from Sulfolobus tokodaii strain 7 that, unlike all other known P450 electron-donor partners, utilizes coenzyme-A and pyruvic acid rather than NADH or NADPH as the source of electrons. The oxidation of lauric acid by the reconstituted system increased 16-fold as the temperature increased from 25 to 70 degrees C and was functional for more than 30 min at the higher temperature. This first in vitro high-temperature P450 catalytic system is a key step in the development of practical high-temperature monooxygenase systems.     

Substrate binding favors enhanced NO binding to P450cam

Ferric cytochrome P450cam from Pseudomonas putida (P450cam) in buffer solution at physiological pH 7.4 reversibly binds NO to yield the nitrosyl complex P450cam(NO). The presence of 1R-camphor affects the dynamics of NO binding to P450cam and enhances the association and dissociation rate constants significantly. In the case of the substrate-free form of P450cam, subconformers are evident and the NO binding kinetics are much slower than in the presence of the substrate. The association and dissociation processes were investigated by both laser flash photolysis and stopped-flow techniques at ambient and high pressure. Large and positive values of S and V observed for NO binding to and release from the substrate-free P450cam complex are consistent with the operation of a limiting dissociative ligand substitution mechanism, where the lability of coordinated water dominates the reactivity of the iron(III)-heme center with NO. In contrast, NO binding to P450cam in the presence of camphor displays negative activation entropy and activation volume values that support a mechanism dominated by a bond formation process. Volume profiles for the binding of NO appear to be a valuable approach to explain the differences observed for P450cam in the absence and presence of the substrate and enable the clarification of the underlying reaction mechanisms at a molecular level. Changes in spin state of the iron center during the binding/release of NO contribute significantly to the observed volume effects. The results are discussed in terms of relevance for the biological function of cytochrome P450 and in context to other investigations of the related reactions between NO and imidazole- and thiolate-ligated iron(III) hemoproteins.     

Thermodynamic and kinetic studies on the binding of nitric oxide to a new enzyme mimic of cytochrome p450

A new model for the P450 enzyme carrying a SO(3)(-) ligand coordinated to iron(III) (complex 2) reversibly binds NO to yield the nitrosyl adduct. The rate constant for NO binding to 2 in toluene is of the same order of magnitude as that found for the nitrosylation of the native, substrate-bound form of P450(cam) (E.S-P450(cam)). Large and negative activation entropy and activation volume values for the binding of NO to complex 2 support a mechanism that is dominated by bond formation with concomitant iron spin change from S = (5)/(2) to S = 0, as proposed for the reaction between NO and E.S-P450(cam). In contrast, the dissociation of NO from 2(NO) was found to be several orders of magnitude faster than the corresponding reaction for the E.S-P450(cam)/NO system. In a coordinating solvent such as methanol, the alcohol coordinates to iron(III) of 2 at the distal position, generating a six-coordinate, high-spin species 5. The reaction of NO with 5 in methanol was found to be much slower in comparison to the nitrosylation reaction of 2 in toluene. This behavior can be explained in terms of a mechanism in which methanol must be displaced during Fe-NO bond formation. The thermodynamic and kinetic data for NO binding to the new model complexes of P450 (2 and 5) are discussed in reference to earlier results obtained for closely related nitrosylation reactions of cytochrome P450(cam) (in the presence and in the absence of the substrate) and a thiolate-ligated iron(III) model complex.     

Mechanisms of Cytochrome C Extraction by Reverse Micelles

Ｔｈｅｒｅｖｅｒｓｅｍｉｃｅｌｌｅｓａｒｅｗａｔｅｒ ｉｎ ｏｉｌｍｉｃｒｏｅｍｕｌｓｉｏｎｄｒｏｐｌｅｔｓｓｔａｂｉｌｉｚｅｄｂｙａｓｕｒｆａｃｔａｎｔｉｎａｎｏｒｇａｎｉｃｓｏｌｖｅｎｔ .Ｔｈｅｐｏｌａｒｓｕｒｆａｃｔａｎｔｈｅａｄｇｒｏｕｐｓｓｕｒｒｏｕｎｄｓｍａｌｌｗａｔｅｒｐｏｏｌｓｗｉｔｈｉｎｗｈｉｃｈｈｙｄｒｏｐｈｉｌｉｃｍｏｌｅｃｕｌｅｓ,ｓｕｃｈａｓａｍｉｎｏａｃｉｄｓａｎｄｐｒｏｔｅｉｎｓ ,ｃａｎｂｅｓｏｌｕｂｉｌｉｚｅｄ .Ｔｈｅａｐｏｌａｒｓｕｒｆａｃ ｔａｎｔｈｙｄｒｏｃａｒ…     

Kinetic isotope effects implicate the iron-oxene as the sole oxidant in P450-catalyzed N-dealkylation

Multiple oxidants have been implicated as playing a role in cytochrome P450-mediated oxidations. Herein, we report results on N-dealkylation, one of the most facile reactions mediated by P450 enzymes. We have employed the N-oxides of a series of para-substituted 13C2H2-labeled N,N-dimethylanilines to function as both substrates and surrogate oxygen atom donors for P450cam and P4502E1. Kinetic isotope effect profiles obtained using the N-oxide system were found to closely match the profiles produced using the complete NAD(P)H/NAD(P)-P450 reductase/O2 system. The results are consistent with oxidation occurring solely through an iron-oxene species.     

Molecular recognition in (+)-alpha-pinene oxidation by cytochrome P450cam

Oxygenated derivatives of the monoterpene (+)-alpha-pinene are found in plant essential oils and used as fragrances and flavorings. (+)-alpha-Pinene is structurally related to (+)-camphor, the natural substrate of the heme monooxygenase cytochrome P450(cam) from Pseudomonas putida. The aim of the present work was to apply the current understanding of P450 substrate binding and catalysis to engineer P450(cam) for the selective oxidation of (+)-alpha-pinene. Consideration of the structures of (+)-camphor and (+)-alpha-pinene lead to active-site mutants containing combinations of the Y96F, F87A, F87L, F87W, and V247L mutations. All mutants showed greatly enhanced binding and rate of oxidation of (+)-alpha-pinene. Some mutants had tighter (+)-alpha-pinene binding than camphor binding by the wild-type. The most active was the Y96F/V247L mutant, with a (+)-alpha-pinene oxidation rate of 270 nmol (nmol of P450(cam))(-)(1) min(-)(1), which was 70% of the rate of camphor oxidation by wild-type P450(cam). Camphor is oxidized by wild-type P450(cam) exclusively to 5-exo-hydroxycamphor. If the gem dimethyl groups of (+)-alpha-pinene occupied similar positions to those found for camphor in the wild-type structure, (+)-cis-verbenol would be the dominant product. All P450(cam) enzymes studied gave (+)-cis-verbenol as the major product but with much reduced selectivity compared to camphor oxidation by the wild-type. (+)-Verbenone, (+)-myrtenol, and the (+)-alpha-pinene epoxides were among the minor products. The crystal structure of the Y96F/F87W/V247L mutant, the most selective of the P450(cam) mutants initially examined, was determined to provide further insight into P450(cam) substrate binding and catalysis. (+)-alpha-Pinene was bound in two orientations which were related by rotation of the molecule. One orientation was similar to that of camphor in the wild-type enzyme while the other was significantly different. Analysis of the enzyme/substrate contacts suggested rationalizations of the product distribution. In particular competition rather than cooperativity between the F87W and V247L mutations and substrate movement during catalysis were proposed to be major factors. The crystal structure lead to the introduction of the L244A mutation to increase the selectivity of pinene oxidation by further biasing the binding orientation toward that of camphor in the wild-type structure. The F87W/Y96F/L244A mutant gave 86% (+)-cis-verbenol and 5% (+)-verbenone. The Y96F/L244A/V247L mutant gave 55% (+)-cis-verbenol but interestingly also 32% (+)-verbenone, suggesting that it may be possible to engineer a P450(cam) mutant that could oxidize (+)-alpha-pinene directly to (+)-verbenone. Verbenol, verbenone, and myrtenol are naturally occurring plant fragrance and flavorings. The preparation of these compounds by selective enzymatic oxidation of (+)-alpha-pinene, which is readily available in large quantities, could have applications in synthesis. The results also show that the protein engineering of P450(cam) for high selectivity of substrate oxidation is more difficult than achieving high substrate turnover rates because of the subtle and dynamic nature of enzyme-substrate interactions.     

Molecular modeling of cytochrome P450 3A4

The three-dimensional structure of human cytochrome P450 3A4 was modeled based on crystallographic coordinates of four bacterial P450s: P450 BM-3, P450cam, P450terp, and P450eryF. The P450 3A4 sequence was aligned to those of the known proteins using a structure-based alignment of P450 BM-3, P450cam, P450terp, and P450eryF. The coordinates of the model were then calculated using a consensus strategy, and the final structure was optimized in the presence of water. The P450 3A4 model resembles P450 BM-3 the most, but the B helix is similar to that of P450eryF, which leads to an enlarged active site when compared with P450 BM-3, P450cam, and P450terp. The 3A4 residues equivalent to known substrate contact residues of the bacterial proteins and key residues of rat P450 2B1 are located in the active site or the substrate access channel. Docking of progesterone into the P450 3A4 model demonstrated that the substrate bound in a 6-orientation can interact with a number of active site residues, such as 114, 119, 301, 304, 305, 309, 370, 373, and 479, through hydrophobic interactions. The active site of the enzyme can also accommodate erythromycin, which, in addition to the residues listed for progesterone, also contacts residues 101, 104, 105, 214, 215, 217, 218, 374, and 478. The majority of 3A4 residues which interact with progesterone and/or erythromycin possess their equivalents in key residues of P450 2B enzymes, except for residues 297, 480 and 482, which do not contact either substrate in P450 3A4. The results from docking of progesterone and erythromycin into the enzyme model make it possible to pinpoint residues which may be important for 3A4 function and to target them for site-directed mutagenesis.     

Forward and backward extractions of cytochrome c using reverse micellar system of sucrose fatty acid ester

The effects of solvent, pH, and ionic strength on the reverse micellar extraction of cytochrome c have been examined, when sucrose fatty acid esters were employed as surfactants of reverse micelles. The transparent and stable reverse micellar organic phase was formed, when the mixture of isooctane and n-butanol (7:3 v/v) was used as the bulk organic phase. The high forward extraction ratio was obtained under mild alkaline and low ionic strength conditions, while the high backward extraction ratio was obtained for acidic pH values or at high ionic strength. The activity of cytochrome c recovered from the reverse micellar phase was sufficiently retained.     

Cytochrome P450CAM enzymatic catalysis cycle: a quantum mechanics/molecular mechanics study

The catalytic pathway of cytochrome P450cam is studied by means of a hybrid quantum mechanics/molecular mechanics method. Our results reveal an active role of the enzyme in the different catalytic steps. The protein initially controls the energy gap between the high- and low-spin states in the substrate binding process, allowing thermodynamic reduction by putidaredoxin reductase and molecular oxygen addition. A second electron reduction activates the delivery of protons to the active site through a selective interaction of Thr252 and the distal oxygen causing the O--O cleavage. Finally, the protein environment catalyzes the substrate hydrogen atom abstraction step with a remarkably low free energy barrier ( approximately 8 kcal/mol). Our results are consistent with the effect of mutations on the enzymatic efficacy and provide a satisfactory explanation for the experimental failure to trap the proposed catalytically competent species, a ferryl Fe(IV) heme.     

The elusive oxidant species of cytochrome P450 enzymes: characterization by combined quantum mechanical/molecular mechanical (QM/MM) calculations

The primary oxidant of cytochrome P450 enzymes, Compound I, is hard to detect experimentally; in the case of cytochrome P450(cam), this intermediate does not accumulate in solution during the catalytic cycle even at temperatures as low as 200 K (ref 4). Theory can play an important role in characterizing such elusive species. We present here combined quantum mechanical/molecular mechanical (QM/MM) calculations of Compound I of cytochrome P450(cam) in the full enzyme environment as well as density functional studies of the isolated QM region. The calculations assign the ground state of the species, quantify the effect of polarization and hydrogen bonding on its properties, and show that the protein environment and its specific hydrogen bonding to the cysteinate ligand are crucial for sustaining the Fe-S bond and for preventing the full oxidation of the sulfur.     

Micelle nano-reactors as mediators of water-insoluble ligand complexation with Cu(II) ions in aqueous medium

Complexation reactions between water-soluble and -insoluble reactants were shown to occur in aqueous media in the presence of normal or reverse surfactant micelles, in significantly higher yields at lower temperatures compared to those achieved in neat organic solvents. The highest yield enhancement in the complexation of novel water-insoluble bis(2-amino-1,3,4-thiadiazolyl)methane and 1,4-bis(2-amino-1,3,4-thiadiazolyl)benzene ligands with Cu(II) ions was achieved in the sodium bis(2-ethylhexyl)sulfosuccinate (AOT)-heptane-water reverse micellar system at the hydration ratio of 15. The results revealed that AOT normal micelles cause a change in the reaction mechanism together with the enhancement of the complex formation. The observed micellar effects were rationalized on basis of the properties of bulk solvents, surfactants and ligands, considering the solvation and hydration ratios of reverse micelles. The results have proved the dependence of complex yield on the amount and accordingly also on the properties of water in the micellar core, indicating that the yield can be maximized by the optimization of the hydration ratio.     

Mechanisms of reaction in cytochrome P450: Hydroxylation of camphor in P450cam

The fundamental nature of reactivity in cytochrome P450 enzymes is currently controversial. Modelling of bacterial P450cam has suggested an important role for the haem propionates in the catalysis, though this finding has been questioned. Understanding the mechanisms of this enzyme family is important both in terms of basic biochemistry and potentially in the prediction of drug metabolism. We have modelled the hydroxylation of camphor by P450cam, using combined quantum mechanics/molecular mechanics (QM/MM) methods. A set of reaction pathways in the enzyme was determined. We were able to pinpoint the source of the discrepancies in the previous results. We show that when a correct ionization state is assigned to Asp297, no spin density appears on the haem propionates and the protein structure in this region remains preserved. These results indicate that the haem propionates are not involved in catalysis.