Cyclodextrin-Based [c2]Daisy Chain Rotaxane Insulating Two Diarylacetylene Cores

A [c2]daisy chain rotaxane with two diarylacetylene cores was efficiently synthesized in 53 % yield by capping a C₂-symmetric pseudo[2]rotaxane composed of two diarylacetylene-substituted permethylated α-cyclodextrins (PM α-CDs) with aniline stoppers. The maximum absorption wavelength of the [c2]daisy chain rotaxane remained almost unchanged in various solvents, unlike that of the stoppered monomer, indicating that the two independent diarylacetylene cores were insulated from the external environment by the PM α-CDs. Furthermore, the [c2]daisy chain rotaxane exhibited fluorescence emission derived from both diarylacetylene monomers and the excimer, which implies that the [c2]daisy chain structure can undergo contraction and extension. This is the first demonstration of a system in which excimer formation between two π-conjugated molecules within an isolated space can be controlled by the unique motion of a [c2]daisy chain rotaxane.     

Co-conformational mechanoisomerism in a calix[6]arene-based [2]rotaxane

The synthesis of a [2]rotaxane, comprising a calix[6]arene-wheel and a dibenzyl-ammonium axle, is here reported. By virtue of its inherent directionality, the calix-wheel makes non-degenerate two equivalent stations of the symmetrical axle. In this way, the neutral rotaxane shows two co-conformations, named endo-alkyl and endo-benzyl, in which an alkyl or benzyl moiety of the axle are included inside the calix-cavity, respectively. NMR and DFT studies showed that the co-conformation preferred by the neutral mechanomolecule is the ‘endo-alkyl’ one, which is more stabilized by C-H···π interactions between the included alkyl chain and the aromatic wall of the calix-cavity.     

Langmuir and Langmuir–Blodgett Films from Amphiphilic Pillar[5]arene‐Containing [2]Rotaxanes

Amphiphilic pillar[5]arene‐containing [2]rotaxanes have been prepared and fully characterized. In the particular case of the [2]rotaxane incorporating a 1,4‐diethoxypillar[5]arene subunit, the structure of the compound was confirmed by X‐ray crystal structure analysis. Owing to a good hydrophilic/hydrophobic balance, stable Langmuir films have been obtained for these rotaxanes and the size of the peripheral alkyl chains on the pillar[5]arene subunit has a dramatic influence on the reversibility during compression–decompression cycles. Indeed, when these are small enough, molecular reorganization of the rotaxane by gliding motions are capable of preventing strong π–π interactions between neighboring macrocycles in the thin film.     

Quantitative conformational study of redox-active [2]rotaxanes, part 1: Methodology and application to a model [2]rotaxane

This paper reports a novel methodology for the conformational analysis of [2]rotaxanes. It combines NMR spectroscopic (COSY, NOESY and the recently reported paramagnetic line-broadening and suppression technique) and electrochemical techniques to enable a quantitative analysis of the co-conformations of interlocked molecules and the conformations of their components. This methodology was used to study a model [2]rotaxane in solution. This [2]rotaxane consists of an axle that incorporates an electron-poor, doubly positively charged viologen that threads an electron-rich crown ether. It has been shown that the axle of the [2]rotaxane in its dicationic state adopts a folded conformation in solution and the crown ether is localised at the viologen moiety. Following a one-electron reduction of viologen, the paramagnetic radical cation of the [2]rotaxane retains its folded conformation in solution. The data also demonstrate that in the radical cation the crown ether remains localised at the viologen, despite its reduced affinity for the singly reduced viologen. The combined quantitative NMR spectroscopic and electrochemical characterisation of the electromechanical function of the model [2]rotaxane in solution provides an important reference point for the study of switching in structurally related bistable [2]rotaxanes, which is the subject of the second part of this work.     

Assembly of an electronically switchable rotaxane on the surface of a titanium dioxide nanoparticle

This paper describes the self-assembly of a heterosupramolecular system consisting of a tripodal [2]rotaxane adsorbed at the surface of a titanium dioxide nanoparticle. The tripodal [2]rotaxane consists of a dumbbell-shaped molecule, incorporating two electron-poor viologens, threading an electron-rich crown ether. The [2]rotaxane also incorporates a bulky tripodal linker group at one end and a bulky stopper group at the other end. The [2]rotaxane is adsorbed, via the tripodal linker group, at the surface of a titanium dioxide nanoparticle. The structure and function of the resulting hetero[2]rotaxane have been studied in detail by (1)H NMR spectroscopy and cyclic voltammetry. A key finding is that it is possible to electronically address and switch the above hetero[2]rotaxane.     

Host-[2]rotaxane: advantage of converging functional groups for guest recognition

A host-[2]rotaxane was constructed by converting a diaminophenylcalix[4]arene into a [2]rotaxane using the DCC-rotaxane method (Zehnder, D.; Smithrud, D. B. Org. Lett. 2001, 16, 2485-2486). N-Ac-Arg groups were attached to the dibenzo-24-crown-8 ring of the rotaxane to provide a convergent functional group. To demonstrate the advantage provided by the rotaxane architecture for recognition of guests that contain a variety of functional groups, association constants (K(A)) for N-Ac-Trp, indole, N-Ac-Gly, fluorescein, 1-(dimethylamino)-5-naphthalenesulfonate, and pyrene bound to the [2]rotaxane were determined by performing (1)H NMR and fluorescence spectroscopic experiments. The host-[2]rotaxane had the highest affinity for fluorescein with a K(A) = 4.6 x 10(6) M(-)(1) in a 98/2 buffer (1 mM phosphate, pH 7)/DMSO solution. A comparison of K(A) values demonstrates that both the aromatic pocket and ring of the host-[2]rotaxane contribute binding free energy for complexation. Association constants were also derived for the same guests bound to the diaminophenylcalix[4]arene and to a diphenylcalix[4]arene that contained arginine residues displayed in a nonconvergent fashion. The host-[2]rotaxane provides higher affinity and specificity for most guests than the host with divergent N-Ac-Arg groups of the one that only has an aromatic pocket. For example, the K(A) for the complex of the host-[2]rotaxane and fluorescein in the DMSO/water mixture is more than 2 orders of magnitude greater than association constants derived for the other hosts.     

六元和七元瓜环与两类端邻苯二甲酰亚胺基紫精轮烷的组装及性质

设计合成了2种不同碳链长度的客体分子1,1'-二甲基邻苯二甲酰亚胺基-4,4'-联吡啶溴化物 (G1)和1,1'-二丁基邻苯二甲酰亚胺基-4,4'-联吡啶溴化物(G2). 利用紫外-可见吸收光谱、 核磁共振波谱和等温滴定量热等方法研究了客体分子G1和G2与六元(Q[6])和七元瓜环(Q[7])的超分子自组装方式. 结果表明, 在加热回流情况下G1与Q[6]利用滑移法能与紫精基团包结形成[2]轮烷结构, 而Q[7]在常温下就能滑过封端基团邻苯二甲酰亚胺与紫精基团包结形成[2]准轮烷结构.     

Templated conversion of a crown ether-containing macrobicycle into [2]rotaxanes

A crown ether-containing macrobicycle was used as the wheel component in a templated synthesis of a [2]rotaxane with an acetal-containing axle. The molecular structures of the macrobicycle and the [2]rotaxane were characterized by NMR spectroscopy and X-ray crystallography. The chloride-binding ability of the macrobicycle, either free in solution or when it is part of a [2]rotaxane, is quite weak as determined by NMR titration experiments. A second analogous [2]rotaxane, with a longer axle, was synthesized, and its solvent-dependent co-conformation was characterized by 2D NMR spectroscopy. The position of the wheel along the axle can be controlled by the solvent polarity, however, attempts to use metal cations such as Na(+), K(+), Ba(2+), and Ag(+) to switch the wheel position in polar solvents were unsuccessful.     

Synthesis of a pH‐Sensitive Hetero[4]Rotaxane Molecular Machine that Combines [c2]Daisy and [2]Rotaxane Arrangements

The synthesis of a novel pH‐sensitive hetero[4]rotaxane molecular machine through a self‐sorting strategy is reported. The original tetra‐interlocked molecular architecture combines a [c2]daisy chain scaffold linked to two [2]rotaxane units. Actuation of the system through pH variation is possible thanks to the specific interactions of the dibenzo‐24‐crown‐8 (DB24C8) macrocycles for ammonium, anilinium, and triazolium molecular stations. Selective deprotonation of the anilinium moieties triggers shuttling of the unsubstituted DB24C8 along the [2]rotaxane units.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Supramolecular gelator based on a [c2]daisy chain rotaxane: efficient gel-solution transition by ring-sliding motion

A supramolecular gelator based on the bistable [c2]daisy chain rotaxane is designed and synthesized. The reversible actuation of the [c2]daisy chain renders the formed supramolecular gel with acid/base-responsive switching between gel and monomer solution. The efficient switching process is attributed to the ring-sliding effect of the rotaxane in response to acid/base stimuli.The ring-inhibited hydrogen bonding stacking results in a nearly quantitatively disassembly of the gel network after addition of base which is hard to be realized by traditional heating strategy in hydrogen-bonding-supported gel.     

Nitroxide biradicals as thread units in paramagnetic cucurbituril-based rotaxanes

The first example of paramagnetic rotaxane containing cucurbit[6]urils has been reported and characterized both by ESR and NMR spectroscopy.     

Design and synthesis of self-included pillar[5]arene-based bis-[1]rotaxanes

Two strategies for the design of new pillar[5]arene-based mechanically self-interlocked molecules (MSMs) are reported here. The first strategy is based on the construction of an intermediate pseudo[1]rotaxane followed by the desired bis-[1]rotaxane. The other one is based on the construction of the desired bis-[1]-rotaxane directly via a condensation reaction through host-guest interactions between a mono-functionalized pillar[5]arene and the axle. This compound has interesting self-assembly properties in methanol and some extended applications of this compound will be reported in the near future.     

A twin-axial[5]pseudorotaxane based on cucurbit[8]uril and a-cyclodextrin

A twin-axial hetero[5]pseudorotaxane was constructed based on 1-hexyl-4,40-bipyridinium guest 1 and cucurbit[8]uril（CB[8]）and a-cyclodextrin（a-CD）.In its structure,CB[8]included two bipyridinium units to realize the twin-axial mode,and the hexyl chain was threaded into the cavity of a-CD.The[5]pseudorotaxane contains two types of macrocyclic hosts while the single axial and twin axial modes co-exist in its structure.The transformation of[5]pseudorotaxane could be realized by the addition of acid and 2,6-dihydroxynaphthalene（HN）.     

Shielded alkyl-functionalised rotaxane host cavities for improved anion recognition

The synthesis and anion recognition properties of four novel [2]rotaxane host architectures containing additional alkyl functionality integrated within macrocyclic and axle components to shield the binding cavity from the solvent are described. The rotaxane species containing a tetra(methyl)-functionalised macrocycle component is found to be a weaker anion complexant than the equivalent unfunctionalised receptor, which is likely due to steric hindrance restricting the anion's access to the interlocked cavity. Rotaxane molecules containing tetra(methyl)-functionalised axle components are also investigated, and the additional alkyl functionality serves to enhance anion binding affinity and selectivity when incorporated within the axle's flexible ethylene linkages. Moreover, the equivalent unfunctionalised rotaxane displays a rare preference for oxoanions over chloride guest species.     

Efficient Intramolecular Energy Transfer between Two Fluorophores in a Bis‐Branched [3]Rotaxane

A bis‐branched [3]rotaxane, with two [2]rotaxane arms separated by an oligo(para‐phenylenevinylene) (OPV) fluorophore, was designed and investigated. Each [2]rotaxane arm employed a difluoroboradiaza‐s‐indacene (BODIPY) dye‐functionalized dibenzo[24]crown‐8 macrocycle interlocked onto a dibenzylammonium in the rod part. The chemical structure of the [3]rotaxane was confirmed and characterized by ¹H and ¹³C NMR spectroscopy and high‐resolution ESI mass spectrometry. The photophysical properties of [3]rotaxane and its reference systems were investigated through UV/Vis absorption, fluorescence, and time‐resolved fluorescence spectroscopy. An efficient energy‐transfer process in [3]rotaxane occurred from the OPV donor to the BODIPY acceptor because of the large overlap between the absorption spectrum of the BODIPY moiety and the emission spectrum of the OPV fluorophore; this shows the important potential of this system for designing functional molecular systems.     

Wire-type ruthenium(II) complexes with terpyridine-containing [2]rotaxanes as ligands: Synthesis, characterization, and photophysical properties

[2]Rotaxanes based on the 1,2-bis(pyridinium)ethane subset[24]crown-8 ether motif were prepared that contain a terminal terpyridine group for coordination to a transition-metal ion. These rotaxane ligands were utilized in the preparation of a series of heteroleptic [Ru(terpy)(terpy-rotaxane)]2+ complexes. The compounds were characterized by 1D and 2D 1H NMR spectroscopy, X-ray crystallography, and high-resolution electrospray ionization mass spectrometry. The effect of using a rotaxane as a ligand was probed by UV/Vis/NIR absorption and emission spectroscopy of the Ru(II) complexes. In contrast with the parent [Ru(terpy)(2)]2+ complex, at room temperature the examined complexes exhibit a luminescence band in the near infrared region and a relatively long lived triplet metal-to-ligand charge-transfer (3MLCT) excited state, owing to the presence of strong-electron-acceptor pyridinium substituents on one of the two terpy ligands. Visible-light excitation of the Ru-based chromophore in acetonitrile at room temperature causes an electron transfer to the covalently linked 4,4'-bipyridinium unit and the quenching of the MLCT luminescence. The 3MLCT excited state, however, is not quenched at all in rigid matrix at 77 K. The rotaxane structure was found to affect the absorption and luminescence properties of the complexes. In particular, when a crown ether surrounds the cationic axle, the photoinduced electron-transfer process is slowed down by a factor from 2 to 3. Such features, together with the synthetic and structural advantages offered by [Ru(terpy)2]2+-type complexes compared to, for example, [Ru(bpy)3]2+-type compounds, render these rotaxane-metal complexes promising candidates for the construction of photochemical molecular devices with a wire-type structure.     

[5]Rotaxane,linear polymer and supramolecular organic framework constructed by nor-seco-cucurbit[10]uril-based ternary complexation

Here we use nor-seco-cucurbit[10]uril (ns-CB[10]) based ternary complexation to construct [5]rotaxane, linear supramolecular dynamic rotaxane polymers and cubic 3D supramolecular organic framework. A [5]rotaxane is constructed by ns-CB[10], TMeCB[6] and short linear derivatives of 4,4′-bipyridinium (M2). ns-CB[10], CB[7] and long linear derivatives of 4,4′-bipyridinium (M3) self-assemble into a linear supramolecular dynamic rotaxane polymer. ns-CB[10] and tetracationic tetrahedral monomer self-assemble and form a three-dimensional supramolecular organic framework. The above results demonstrate that ns-CB[10]-based ternary complexation is a versatile platform to build various supramolecular systems.     

En route to a molecular sheaf: active metal template synthesis of a [3]rotaxane with two axles threaded through one ring

We report that a 2,2':6',2″-terpyridylmacrocycle-Ni complex can efficiently mediate the threading of two alkyl chains with bulky end groups in an active metal template sp(3)-carbon-to-sp(3)-carbon homocoupling reaction, resulting in a rare example of a doubly threaded [3]rotaxane in up to 51% yield. The unusual architecture is confirmed by X-ray crystallography (the first time that a one-ring-two-thread [3]rotaxane has been characterized in the solid state) and is found to be stable with respect to dethreading despite the large ring size of the macrocycle. Through such active template reactions, in principle, a macrocycle should be able to assemble as many axles in its cavity as the size of the ring and the stoppers will allow. A general method for threading multiple axles through a macrocycle adds significantly to the tools available for the synthesis of different types of rotaxane architectures.     

Interlocked Porphyrin Switches

We describe the synthesis of a series of interlocked structures from porphyrin–glycoluril cage compounds and bis(olefin)‐terminated viologens by an olefin‐metathesis protocol. The length of the chain connecting the olefin substituents with the viologen has a marked effect on the products of the ring‐closure reaction. Long chains give [2]‐ and [3]catenane structures, whereas short chains give a mixture of [3]‐, [4]‐, and [5]catenanes. For comparison several [2]rotaxane compounds were prepared. The interlocked catenane and rotaxane structures display switching behavior, which can be controlled by the addition of acid and base. The kinetic and thermodynamic parameters of the switching processes have been determined by NMR spectroscopy.