Porous alginate-Ca hydrogels interpenetrated with PNIPAAm networks: Interrelationship between compressive stress and pore morphology

Thermo-sensitive porous hydrogels composed of interpenetrated networks (IPN) of alginate-Ca²⁺ and PNIPAAm have been obtained. The hydrogels were prepared by cross-linking alginate-Na⁺ with Ca²⁺ ions inside PNIPAAm networks. Compressive tests and scanning electron microscopy were used to evaluate gel strength and pore morphology, respectively. IPN hydrogels displayed two distinct pore morphologies under thermal stimuli. Below 30-35 °C, the LCST of PNIPAAm in water, IPN hydrogels were highly porous. The pore size of hydrogel heated above LCST became progressively smaller. Alginate-Ca²⁺ and PNIPAAm hydrogels, used as references, did not present such behaviour, indicating that the porous effect is due to IPN hydrogel. It was verified that higher strength is achieved when the hydrogel presents small pore size and the temperature is increased. It is suggested that at temperatures above LCST, the PNIPAAm chains shrink and pull the alginate-Ca²⁺ networks back. During shrinking, the polymer chains occupy the open spaces (pores from which water is expelled), and therefore, the hydrogel becomes less deformable when subjected to compressive stress. The results presented in this work indicate that the mechanical properties as well as the pore morphologies of these IPN hydrogels can be tailored by thermal stimulus.     

Crosslinking Parameter on the Preparation of Cellulose Based Hydrogel with Divynilsulfone

Polymeric hydrogels are crosslinked polymers which display high sorption capacity in water and water solution. In this work, cellulose based hydrogel was prepared with divinylsulfone as crosslinking agent. Cellulose based hydrogel was synthesized as a mixture of sodium salt of carboxymethylcellulose (CMCNa) and hydroxyethylcellulose (HEC). The effect of chemical composition, temperature and reaction time during crosslinking processes was investigated both the value of equilibrium water uptake and swelling ratio. Infrared spectra of the synthesized polymeric networks were studied to investigate the chemical structure of crosslinking reaction qualitatively. The thermal properties and morphology of the obtained cellulose based hydrogels were observed by means of TGA (thermo-gravimetry analysis) and SEM (scanning electron microscopy), respectively. Crosslinking of CMCNa/HEC polymeric network results in a decrease in thermal stability. Hydrogel with weight ratio of CMCNa/HEC 5 to 1 at reaction temperature of 60 °C gave the highest absorption capacity in distilled water.     

Dehydration kinetics of polyvinyl alcohol hydrogel wound dressings during wound healing process

<正>The hydrogel wound dressing based on polyvinyl alcohol(PVA) was prepared by the freezing-thawing cyclic method.The dehydration kinetics of prepared hydrogels was determined using the experimental method and mathematical modeling based on diffusion mechanism.The results show that the dehydration rate of PVA hydrogel wound dressing inversely depends on the hydrogel thickness as well as water content of the wound.On the other hand,the initial water content of hydrogel and the atmospheric humidity have little direct effect on the dehydration rate.The good agreement between experimental and mathematical modeling results in early stages of dehydration process shows that the predominate factor determining the dehydration of these wound dressings is diffusion.     

Characterization of stimuli-sensitive polymers for biomedical applications

Stimuli-sensitive polymers were synthesized by copolymerizing varying ratios of N-isopropyl acrylamide(NIPAAm) and acrylic acid(AAc). The influence of polyelectrolytes on the lower critical solution temperatures(LCSTs) of these temperature/pH sensitive polymers was investigated in the pH range of 2-12. Polyelectrolyte complexes were prepared by mixing poly(NIPAAm-co-AAc) as anionic polyelectrolyte with poly(allyl amine)(PAA) or poly(L-lysine)(PLL) as cationic polyelectrolytes, respectively. Back titration was performed to determine the pK_a values of PAAc in poly(NIPAAm-co-AAc) and to study the effect of comonomer ionization on the cloud point temperature. The effect of polyelectrolyte complex formation on the conformation of PLL was studied as a function of temperature by means of circular dichroism(CD). The swelling ratio of poly(NIPAAm-co-AAc) hydrogels as a function of pH at various temperature was obtained by measuring the weight of the hydrogels in buffer solutions. The LCSTs of the poly(NIPAAm-co-AAc) were strongly affected by pH, polyelectrolyte solutes, AAc content, and charge density. The influence of more hydrophobic PLL as a polyelectrolyte on the cloud point of PNIPAAm/water in the copolymer was stronger than that of poly(allyl amine)(PAA). Indomethacin was loaded into these hydrogels, and controlled release of this molecule from the hydrogel was determined under various temperature and pH conditions using UV/Vis spectrophotometry.     

Supramolecular Polymer Hydrogels from Bolaamphiphilic L‐Histidine and Benzene Dicarboxylic Acids: Thixotropy and Significant Enhancement of EuIII Fluorescence

Supramolecular polymers from the bolaamphiphilic L ‐histidine ( BolaHis ) and benzene dicarboxylic acids (o‐phthalic acid, OPA ; isophthalic acid, IPA and terephthalic acid, TPA ) were found to form hydrogels although neither of the single components could gel water. It was suggested that the hydrogen bond and ionic interactions among different imidazole and carboxylic acid groups are responsible for the formation of the supramolecular polymer as well as the hydrogel formation. Depending on the structures of the dicarboxylic acids, different behaviors of the gels were observed. The hydrogels from OPA / BolaHis and IPA / BolaHis showed thixotropic properties, that is, the hydrogel was destroyed by hand shaking and then slowly gelated again at room temperature. However, the hydrogels of TPA / BolaHis could not. Interestingly, when Eu^III was doped into IPA / BolaHis supramolecular polymers, very strong luminescence enhancement was observed. FT‐IR spectroscopies and XRD analysis revealed that the strong luminescence enhancement could be attributed to the matched supramolecular nanostructures, which render the correct binding and a good dispersion of Eu^III ions. The work offers a new approach for fabricating functional hydrogels through the supramolecular polymers.     

Organic–inorganic hybrid hydrogels involving poly(N‐isopropylacrylamide) and polyhedral oligomeric silsesquioxane: Preparation and rapid thermoresponsive properties

3‐Acryloxypropylhepta(3,3,3‐trifluoropropyl) polyhedral oligomeric silsesquioxane (POSS) was synthesized and used as a modifier to improve the thermal response rates of poly(N‐isopropylacrylamide) (PNIPAM) hydrogel. The radical copolymerization among N‐isopropylacrylamide (NIPAM), the POSS macromer and N,N′‐methylenebisacrylamide was performed to prepare the POSS‐containing PNIPAM cross‐linked networks. Differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) showed that the POSS‐containing PNIPAM networks displayed the enhanced glass transition temperatures (T_g's) and improved thermal stability when compared with plain PNIPAM network. The POSS‐containing PNIPAM hydrogels exhibited temperature‐responsive behavior as the plain PNIPAM hydrogels. It is noted that with the moderate contents of POSS, the POSS‐containing PNIPAM hydrogels displayed much faster response rates in terms of swelling, deswelling, and re‐swelling experiments than plain PNIPAM hydrogel. The improved thermoresponsive properties of hydrogels have been interpreted on the basis of the formation of the specific microphase‐separated morphology in the hydrogels, that is, the POSS structural units in the hybrid hydrogels were self‐assembled into the highly hydrophobic nanodomains, which behave as the microporogens and promote the contact of PNIPAM chains and water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 504–516, 2009     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

Macromolecular Diffusion in Self-Assembling Biodegradable Thermosensitive Hydrogels

Hydrogel formation triggered by a change in temperature is an attractive mechanism for in situ gelling biomaterials for pharmaceutical applications such as the delivery of therapeutic proteins. In this study, hydrogels were prepared from ABA triblock polymers having thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) flanking A-blocks and hydrophilic poly(ethylene glycol) B-blocks. Polymers with fixed length A blocks (~22 kDA) but differing PEG-midblock lengths (2, 4 and 10 kDa) were synthesized and dissolved in water with dilute fluorescein isothiocyanate (FITC)-labeled dextrans (70 and 500 kDA). Hydrogels encapsulating the dextrans were formed by raising the temperature. Fluorescence recovery after photobleaching (FRAP) studies showed that diffusion coefficients and mobile fractions of the dextran dyes decreased upon elevating temperatures above 25 °C. Confocal laser scanning microscopy and cryo-SEM demonstrated that hydrogel structure depended on PEG block length. Phase separation into polymer-rich and water-rich domains occurred to a larger extent for polymers with small PEG blocks compared to polymers with a larger PEG block. By changing the PEG block length and thereby the hydrogel structure, mobility of FITC-dextran could be tailored. At physiological pH the hydrogels degraded over time by ester hydrolysis, resulting in increased mobility of the encapsulated dye. Since diffusion can be controlled according to polymer design and concentration, plus temperature, these biocompatible hydrogels are attractive as potential in situ gelling biodegradable materials for macromolecular drug delivery.     

Alginate/Polyoxyethylene and Alginate/Gelatin Hydrogels: Preparation,Characterization, and Application in Tissue Engineering

Hydrogels are attractive biomaterials for three-dimensional cell culture and tissue engineering applications. The preparation of hydrogels using alginate and gelatin provides cross-linked hydrophilic polymers that can swell but do not dissolve in water. In this work, we first reinforced pure alginate by using polyoxyethylene as a supporting material. In an alginate/PEO sample that contains 20 % polyoxyethylene, we obtained a stable hydrogel for cell culture experiments. We also prepared a stable alginate/gelatin hydrogel by cross-linking a periodate-oxidized alginate with another functional component such as gelatin. The hydrogels were found to have a high fluid uptake. In this work, preparation, characterization, swelling, and surface properties of these scaffold materials were described. Lyophilized scaffolds obtained from hydrogels were used for cell viability experiments, and the results were presented in detail.     

Characterization of structured acrylamide/acrylic acid hydrogels by TMDSC and microscopy

The thermal behavior of hydrogels synthesized by solution polymerization between acrylamide, acrylic acid and diglycidyl acrylate (DGA) as a crosslinking agent was investigated. The structure of the hydrogel can be tightly controlled with the reaction temperature. This method produces a new type of hydrogels, which exhibit well defined structures at various scales of length simultaneously. These multi-structured hydrogels are hydrophilic, elastic, water insoluble, and soft polymers with an anisotropic optical response. The structure was observed by scanning electron microscopy (SEM), polarized light microscopy (PLM) and macroscopic visualization (CCD camera). In addition, structural transitions in the hydrogels were monitored by temperature modulated differential scanning calorimetry (TMDSC). Severe heating tests in an adiabatic oven were performed to analyze decomposition of the material. Fourier transform infrared (FTIR) spectroscopy was used to qualitatively analyze the hydrogels samples exposed to a sudden thermal treatment.     

快速响应的温敏性聚(N-异丙基丙烯酰胺)水凝胶的合成及表征

快速响应的温敏性聚(N-异丙基丙烯酰胺)水凝胶的合成及表征;N-异丙基丙烯酰胺;水凝胶;温敏性;快速响应     

Synthesis and characterization of thermo-sensitive poly (N-isopropylacrylamide) hydrogel with fast response rate

Thermo-sensitive poly (N-isopropylacrylamide) (PNIPA) hydrogel with fast response rate was prepared by polymerizing N-isopropylacrylamide (NIPA) in an aqueous hydroxyl-propyl-methyl cellulose solution. The volume phase transition temperature of PNIPA hydrogels was characterized by differential scanning calorimetry (DSC), and the surface morphology was observed by scanning electron microscopy (SEM). The swelling ratios of the hydrogels at different temperatures were measured. Furthermore, the deswelling kinetics of the hydrogels was also studied by measuring their water retention capacity. In comparison with a conventional PNIPA hydrogel prepared in water, the hydrogel synthesized in aqueous hydroxyl-propyl-methyl cellulose solution has higher swelling ratios at temperatures below the lower critical solution temperature and exhibits a much faster response rate to temperature changes. For example, the hydrogel made in aqueous hydroxyl-propyl-methyl cellulose solution lost 89% water within 1 min and about 93% water in 4 min, whereas the conventional hydrogel lost only about 66% water in 15 min from the deswelling measurement in similar conditions. Translated from Chinese Journal of Applied Chemistry, 2006, 23(6): 581–585 (in Chinese)     

Spherical phospholipid polymer hydrogels for cell encapsulation prepared with a flow-focusing microfluidic channel device

To prepare spherical polymer hydrogels, we used a flow-focusing microfluidic channel device for mixing aqueous solutions of two water-soluble polymers. Continuous encapsulation of cells in the hydrogels was also examined. The polymers were bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer bearing phenyl boronic acid groups (PMBV) and poly(vinyl alcohol) (PVA), which spontaneously form a hydrogel in aqueous medium via specific molecular complexation upon mixing, even when they were in cell culture medium. The microfluidic device was prepared with polydimethylsiloxan, and the surface of the channel was treated with fluoroalkyl compound to prevent sticking of the polymers on the surface. The microfluidic channel process could control the diameter of the spherical hydrogels in the range of 30-90 μm and generated highly monodispersed diameter spherical hydrogels. We found that the polymer distribution in the hydrogel was influenced by the PVA concentration and that the hydrogel could be dissociated by the addition of d-sorbitol to the suspension. The single cells could be encapsulated and remain viable in the hydrogels. The localized distribution of polymers in the hydrogel may provide an environment for modulating cell function. It is concluded that the spontaneous hydrogel formation between PMBV and PVA in the flow-focusing microfluidic channel device is applicable for continuous preparation of a spherical hydrogel-encapsulating living cell.     

聚(4-乙酰基丙烯酰乙酸乙酯-co-丙烯酸)水凝胶的溶胀动力学以及温度敏感性研究

通过分子结构设计, 合成了疏水性单体4-乙酰基丙烯酰乙酸乙酯(AAEA), 并以该单体与丙烯酸(AA)进行自由基溶液共聚, 制备了P(AAEA-co-AA)新型温度敏感性水凝胶. AAEA的¹H NMR及FT-IR分析表明, 该单体主要以烯醇式结构存在; P(AAEA-co-AA)的FT-IR分析发现, PAAEA与PAA之间存在较强烈的氢键作用, 使得AAEA烯醇异构体中的C—O伸缩振动吸收峰移向了低波数处. 对冷冻干燥后凝胶的电镜分析发现, 当AAEA用量较高时, 由于凝胶内部分子链段的疏水聚集, 各部分溶胀度以及溶胀速度不均一而使得凝胶表面粗糙不平. 采用DSC对凝胶的体积相转变进行了研究, 结果表明, 该水凝胶的体积相转变温度(VPTT)在48.2至61.8 ℃之间, 并且随着AAEA用量的减小, 凝胶的VPTT逐渐增加. 对该新型温度敏感性水凝胶在去离子水中的溶胀动力学研究发现, 当AAEA用量高于4.6 g时, 凝胶属于Fick凝胶; 反之凝胶则属于非Fick凝胶. 该水凝胶在去离子水中具有良好的温度敏感性, 当外界温度低于VPTT时, 凝胶能保持溶胀状态; 而当外界温度高于VPTT时, 凝胶的平衡溶胀度迅速下降, 表现为温度敏感性. 进一步研究发现, 凝胶组成不仅会影响凝胶的VPTT, 而且会影响凝胶温度敏感性的强弱.     

Modified chitosan 4. Superabsorbent hydrogels from poly(acrylic acid-co-acrylamide) grafted chitosan with salt- and pH-responsiveness properties

Graft copolymerization of mixtures of acrylic acid (AA) and acrylamide (AAm) onto chitosan was carried out by using potassium persulfate (KPS) as a free radical initiator in the presence of methylenebisacrylamide (MBA) as a crosslinker. The effect of reaction variables, such as MBA concentration and AA/AAm ratio on the water absorbency capacity have been investigated. The polymer structures were confirmed by FTIR spectroscopy. Water absorbencies were compared for the hydrogels before and after alkaline hydrolysis. In the non-hydrolyzed hydrogel, enhanced water absorbency was obtained with increasing AA in monomer feed. However, after saponification, the sample with high AAm ratio exhibited more water absorbency. These behaviors were discussed according to structural parameters. The swelling kinetics of the superabsorbing hydrogels was studied as well. The hydrogels exhibited ampholytic and reversible pH-responsiveness characteristics. The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. The hydrogels exhibited salt-sensitivity and cation exchange properties. The pH-reversibility and on-off switching properties of the hydrogels make the intelligent polymers as good candidates for considering as potential carriers for bioactive agents, e.g. drugs.     

聚乙烯醇/壳聚糖复合水凝胶的物理化学性质

测定了聚乙烯醇(PVA)和壳聚糖(CS)复合水凝胶的平衡含水量、熔融焓、等温溶胀动力学和非等温失水动力学等性质,讨论了水凝胶的组成和制备参数对这些性质的影响.结果显示:PVA/CS复合水凝胶具有适宜于软骨修复替代材料的网络结构和平衡含水量.CS与PVA复合减弱了凝胶的结晶度,但却增强了水与凝胶支架的相互作用.尽管水凝胶力学拉伸强度有所降低,但却优化了凝胶的生物相容性和降解能力.PVA/CS复合水凝胶是一种潜在的软骨修复材料,作为一种理论研究的模型体系,它将促进热力学在复杂医用材料方面的应用.     

Synthesis and Characterization of Hydrogels Based on Gamma Radiation Copolymerization of N‐isopropylacrylamide and Ethylene Glycol Dimethacrylate Monomers

Hydrogels based essentially on N‐isopropylacrylamide (NIPAAm) and different ratios of ethylene glycol dimethacrylate (EGDMA) monomer were synthesized by gamma radiation copolymerization. The thermal decomposition behavior of NIPAAm/EGDMA hydrogels was determined by thermogravimetric analysis (TGA). The effect of temperature and pH on the swelling behavior was also studied. The results showed that the ratio of EGDMA in the comonomer feeding solution has a great effect on the yield product, gel fraction and water content in the final hydrogel. In this regard, it was observed that the increase of EGDMA ratio decreased these properties. The TGA study showed that all the compositions of NIPAAm/EGDMA hydrogels displayed higher thermal stability than the hydrogel based on pure PNIPAAm hydrogel. The swelling kinetics in water showed that pure PNIPAAm and NIPAAm/EGDMA hydrogels reached equilibrium after 6 h. However, NIPAAm/EGDMA hydrogels show swelling in water lower than pure PNIPAAm. The results showed that the swelling character of pure PNIPAAm and NIPAAm/EGDMA hydrogels was affected by the change in temperature within the temperature range 25–40°C, and showed a reversible change in swelling in the pH range 4–7 depending on composition.     

Influence of crosslinker and ionic comonomer concentration on glass transition and demixing/mixing transition of copolymers poly(N-isopropylacrylamide) and poly(sodium acrylate) hydrogels

Hydrogels based on N-isopropylacrylamide and sodium acrylate as ionic comonomer were synthesized by free radical polymerization in water using N,N′-methylenebisacrylamide as crosslinker and ammonium persulfate as initiator. The glass transition of dried copolymers poly(N-isopropylacrylamide) (PNIPA) and poly(sodium acrylate) (SA) gels and demixing/mixing transition of PNIPA-SA hydrogels swollen with increasing amounts of water were studied using conventional differential scanning calorimetry. In the crosslinked polymers, the glass transition linearly increases, and the transition range becomes broader, with increasing crosslinker content. Increasing content of ionic comonomer also produces an increase of glass transition temperature, which moves to higher temperatures with higher sodium acrylate fraction. The influence of chemical structure of PNIPA-SA hydrogels on the lower critical solution temperature (LCST) of PNIPA-SA/water mixtures during heating and cooling was quantified as function of the content of the crosslinker and the ionic comonomer, as well as water content of the hydrogel in the range from 95 to 70 wt%. At parity of water content, the LCST occurs at higher temperatures for gels containing higher amounts of sodium acrylate. Similarly, the introduction of N,N′-methylenebisacrylamide causes an increase of the LCST, which grows with increasing of crosslinking degree of the hydrogel.     

Synthesis of doubly labeled polyacrylic acid with14C and3H

Polyacrylic hydrogels were¹⁴C- and³H-labeled in three main steps. In the first one, the monomer as sodium salt was¹⁴C-labeled at the carboxyl group via the carbonation of vinylmagnesium bromide and [1-¹⁴C]acrylic acid was obtained, followed by labeling with tritium via isotopic exchange in heterogeneous catalysis. The monomer was purified and its radiochemical purity was analyzed using TLC. In the last step, the hydrogel was obtained through radiopolymerization of the doubly labeled monomer using a⁶⁰Co source. The oligomers and unpolymerized monomers were eliminated from the hydrogel by swelling in water followed by dehydration with methanol.     

Physicochemical characterization of acrylamide/bisacrylamide hydrogels and their application for the conservation of easel paintings

Acrylamide chemical gels have been synthesized to obtain systems with mechanic and hydrophilic properties suitable for the cleaning of works of art. The gel characteristics were tailored by changing the polymer percentage present in the final hydrogel formulation from 2 to 10% w/w. Two different hydrogels have been selected in this interval for an in depth characterization (i.e., S 4% w/w and H 6% w/w). Water retention properties of the gels along with the free water index have been determined by the combination of standard dehydration tests and differential scanning calorimetry (DSC) measurements. The gels' structure has been determined by scanning electron microscopy (SEM) and small angle X-ray scattering (SAXS). The water retention capacity of hydrogel, H, was also determined. Cleaning tests on easel painting replicas, performed with both hydrogels loaded with an aqueous detergent system, showed good results in the removal of a widely used synthetic adhesive and hence offered these gels as a real alternative to the widely applied physical gel methodology with the advantage of being a residue-free technique. A preliminary SAXS investigation confirms the persistence of the detergent system nanostructure inside the hydrogel.