New rare earth metal complexes with nitrogen-rich ligands: 5,5'-bitetrazolate and 1,3-bis(tetrazol-5-yl)triazenate-on the borderline between coordination and the formation of salt-like compounds

From the two nitrogen-rich ligands BT(2-) (BT=5,5'-bitetrazole) and BTT(3-) (BTT=1,3-bis(1H-tetrazol-5-yl)triazene), a series of novel rare earth metal complexes were synthesised. For the BT ligand, a vast number of these complexes could be structurally characterised by single-crystal XRD, revealing structures ranging from discrete molecular aggregates to salt-like compounds. The isomorphous complexes [La2(BT)3]14 H2O (1) and [Ce2(BT)3]14 H2O (2) reveal discrete molecules in which one BT(2-) acts as a bridging ligand and two BT groups as chelating ligands. The complexes, [M(BT)(H2O)7]2[BT] x (x) H2O (3-5), (M=Nd (3), Sm (4), and Eu (5)), are also isomorphous and consist of [M(BT)(H2O)7]+ ions in which only one BT(2-) acts as a chelate ligand for each metal centre. [Tb(H2O)8]2[BT]3 x H2O (6) and [Er(H2O)8](2)[BT](3)x H2O (7) are salt-like compounds that do not exhibit any significant metal-nitrogen contacts. In the BTT-samarium compound 9, discrete molecules were found in which BTT(3-) acts as a tridentate ligand with three Sm--N bonds.     

Deep extractive desulfurization of diesel fuels by FeCl3/ionic liquids

The extractive desulfurization of dibenzothiophene（DBT）,benzothiophene（BT）,and 4,6-dimethyldi-benzothiophene （4,6-DMDBT） in model oil was carried out using anhydrous FeCl₃ and 1-methyl-3-octylimidazolium chloride system（[Omim|Cl·2FeCl₃）.This new system exhibited high extractive efficiency and the sulfur removal of DBT in model oil(V_IL/V_oil=1/20) could reach 99.4%at room temperature for 30 min,which was obviously superior to single[Omim]Cl as extractant（22.9%）.When the[Omim|CI·2FeCl₃ was used,the S-removal of 4,6-DMDBT and BT could also be up to 99.3%and 96.2%, respectively.Moreover,the ionic liquid could be recycled five times without a significant decrease in extractive ability.     

Polynuclear complexes of chromium(III), copper(II) or nickel(II) with thiocyanate as a bridging ligand

Novel complexes of the type [CuL2]3[Cr(NCS)6]2·xH2O (L = 2,2-bipyridine (bpy), x = 0; L = o-phenanthroline (phen), x = 1), [Cu(dien)]3[Cr(NCS)6]2·3H2O (dien=diethylenetriamine) or [Ni(phen)2]3[Cr(NCS)6]2· 2H2O have been prepared and studied by elemental analyses, i.r. spectra and magnetic measurements. Some of the complexes have been characterized by temperature-dependent magnetic susceptibilities, and weak antiferromagnetic exchange interaction was found for [Cu-(phen)2]3[Cr(NCS)6]2·H2O and [Ni(phen)2]3[Cr(NCS)6]2· 2H2O. Physico-chemical studies account for the polymeric structure, with thiocyanate bridges between Cu or octahedral Ni and octahedral Cr (chromophore CrN6).     

Formation of Gels and Films from Hexamine- and Hexamidecobalt(II) Carbonylcobalt Complexes

When kept in dilute acetonitrile solutions, complexes [CoB₆][Co(CO)₄]₂ [B = C₅H₅N, Me₂NC(O)H] form gels CoB _x (MeCN) _y ](OH)₂·2[CoCO₃·2CoO·2H₂O] (x = 2, 3, y = 4, 3), while the polyfunctional complex [Co{(EtO)₃SiCH₂CH₂CH₂NH₂)}][Co(CO)₄]₂ gives a mixed carbonate-siloxane gel. The gel formation is accompanied by complete decomposition of [Co(CO)₄]^- anions under the action of air oxygen and moisture, to give CoCO₃·2CoO·2H₂O. Mechanistically, the gel and film formation involves absorption of molecular oxygen by the hexamine- or hexamidecobalt(II) cation and subsequent decomposition of theunstable oxygenated carbonylcobalt complex.     

Electronic and topological properties of interactions between imidazolium-based ionic liquids and thiophenic compounds: a theoretical investigation

To deepen the understanding the interactions of thiophenic compounds in ionic liquids, we have performed a systemic study on the electronic structures, and topological properties of interactions between N-ethyl-N-ethylimidazolium diethyl phosphate ([EEIM][DEP]) ionic liquid and 3-methylthiophene (3-MT), benzothiophene (BT), or dibenzothiophene (DBT) using density functional theory. From NBO atomic charges and electrostatic potential analyses, most of the positive charge is located on C2–H2 in the [EEIM] cation, and the negative charge is focused on oxygen atoms in [DEP] anion, implying oxygen atoms in [DEP] should easily attack C2–H2 in [EEIM]. The electrostatic interaction between anion and cation may be dominant for the formation of the [EEIM]–[DEP] ion pair. The large stabilizing effect is due to the strong orbital interactions between the antibonding orbital of proton donor σ*(C2–H2) in [EEIM] cation and the lone pairs of proton acceptor LP(O) in [DEP] anion. A common feature of [EEIM][DEP], [EEIM][DEP]-3-MT/BT/DBT complexes is the presence of hydrogen bonds between [EEIM] cation and [DEP] anion. This work has also given the interacting mechanism of 3-MT, BT, and DBT adsorption on [EEIM][DEP] ionic liquid. Both [EEIM] cation and [DEP] anion are shown to play important roles in interactions between 3-MT, BT, DBT and [EEIM][DEP], which has been corroborated by NBO and AIM analyses. The π···π, π···C–H and hydrogen bonding interactions occur between [EEIM][DEP] and 3-MT, BT, DBT. The strength of sulfur involved interactions between 3-MT, BT, DBT and [EEIM][DEP] follows the order of 3-MT > BT > DBT. The order of interaction energies between [EEIM][DEP] and 3-MT, BT, DBT is 3-MT < BT < DBT, in agreement with the order of extractive selectivity from fuel oils (DBT > BT > 3-MT) in terms of sulfur partition coefficients.     

Structural studies of 4-benzamido-1-o-aminoacetophenone-3-thiosemicarbazone complexes

Summary Complexes of Cu^II, Ni^II, Co^II, Zn^II, Cd^II and Hg^II with 4-benzamido-1-o-aminoacetophenone-3-thiosemicarbazone (H₂BATS) are reported and have been characterized by elemental analyses, molar conductivities, magnetic moments, spectral (visible, i.r.) and thermal (d.t.a., t.g., d.t.g.) measurements. I.r. spectra show that H₂BATS behaves as a dianionic, monoanionic or neutral tetradentate ligand or as a monoanionic tridentate ligand. [Cu₂(H₂BATS)Cl₂]·2H₂O and [Cu₂(H₂BATS)Ac₂]·2H₂O complexes are diamagnetic while [Co(HBATS)OH]·2H₂O and [Ni(HBATS)OH]·2H₂O are octahedral. All the complexes are non-electrolytes. Generally, the solid metal acetate complexes have a unique decomposition exotherm profile which can be used as a rapid and sensitive tool for the detection of acetate-containing complexes.     

Ligating properties of tertiary phosphine/arsine sulphides or selenides. Part VII. Synthesis and characterisation of palladium(II) complexes with some mono- and ditertiary phosphine sulphides or selenides

Summary Palladium(II) halides react with triphenylphosphine sulphide or selenide, 1,1-methylenebis(diphenylphosphine sulphide or selenide) (MDPS or MDPSe), 1,3-trimethylene-bis-(diphenylphosphine selenide) (PDPSe) or tetramethyldiphosphine disulphide (TMDPS) forming complexes [PdBr₂ · 2L], [2PdBr₂ · 3L] (L=Ph₃PS or Ph₃PSe), [PdX₂ · L] (X=Cl, L =PDPSe; X=Br, L=MDPS or MDPSe; X=Cl or Br, L=TMDPS) and [3PdBr₂ · 2TMDPS]. Characterisation and stereochemical assignments have been made through elemental analyses, i.r., far i.r. and electronic spectra, magnetic susceptibility and molar conductance data and tga studies. Bidentate ligand complexes have higher thermal stability than the monodentate ligand complexes. Chelation or bridging modes of the bidentate ligands have been demonstrated.     

2-（羟甲基）-N-甲基咪唑桥联Mn2ⅡMn2Ⅲ四核配合物的合成、结构和磁性简

报道了3个2-(羟甲基)-N-甲基咪唑(Hhmmi)桥联的Mn2ⅡMn2Ⅲ四核配合物[Mn4(hmmi)6(DMF)2·(N3)2](ClO4)2(1),[Mn4(hmmi)6(H2O)2(N3)2](ClO4)2(2)和[Mn4(hmmi)6Cl4]·6CH3CN(3·6CH3CN)的合成、晶体结构和磁性. 在配合物1~3中,中心结构皆为四核蝶形混合价Mn结构,2个MnⅡ占据蝶形两翼位置,2个MnⅢ占据蝶形中间位置. MnⅢ离子间通过hmmi-上的μ3-烷氧原子桥联,相应MnⅢ-O-MnⅢ键角为101.3°~103.4°;而MnⅢ-MnⅡ离子间通过hmmi-上的μ3-和μ2-烷氧原子桥联,相应MnⅢ-O-MnⅡ键角为92.5°~113.7°. 对配合物1~3进行变温磁化率拟合,结果表明,MnⅢ-MnⅢ间呈铁磁相互作用,而MnⅢ-MnⅡ间以及Mn4分子间存在较弱的铁磁或反铁磁耦合.     

Kinetic analysis of thermogravimetric data

Thermal decomposition of 6 complexes of the type AH[Cr(NCS)₄ (am)₂]· nH₂O is studied with derivatograph. The formation of Cr(NCS)₃ as a labile intermediate is presumed. For some decomposition stages kinetic parameters are derived. The kinetic compensation effect is discussed.     

Thermal decomposition kinetics of Co(II), Ni(II), Cu(II) and Zn(II) complexes of dihydrazinium ethylenediamine-tetraacetate

Hydrazinium ethylenediaminetetraacetatometalate complexes of the type, N₂H₅ [M(Hedta)·H₂O] were subjected to systematic TG/DTG analysis. The decomposition process consists of three stages. Kinetic parameters were evaluated for each of these stages using the Coats-Redfern equation.     

新型含N-杂环卡宾二硫化碳配体的锰铼金属双核化合物的合成、表征及电化学性质简

合成了一系列含N-杂环卡宾二硫化碳加合物配体的锰铼金属有机化合物,其中包括3种单核化合物和3种双核化合物,对它们的结构进行了表征,并研究其反应性和电化学性质. 与三烷基膦二硫化碳配体相比,含N-杂环卡宾二硫化碳加合物配体的锰铼金属有机化合物展现出不同的反应特性. 研究结果表明,[MnRe(CO)6(μ-H){μ-CH3SC(S)IMes2}]配合物具有催化质子还原成氢气的能力.     

Comparative density functional theory study of the binding of ligands to Cu+ and Cu2+: Influence of the coordination and oxidation state

BP86, B3LYP and MP2 methods, generally used to study large systems containing transition metals, were compared for their ability to accuratly evaluate bond dissociation energies of copper complexes. Various [Cu-L]+ and [Cu-L]2+ complexes in which L are small ligands and the higher coordinated complexes, [Cu(NH3)(4)]+ and [Cu(NH3)4]2+ were studied. For monoligated complexes, the BDEs calculated by the three methods differed by 2 to 60 kcal/mol, the larger differences being obtained for [Cu-L]2+ complexes. The BDEs calculated using the B3LYP functional were in general close to the experimental values whereas the BDEs calculated using the BP86 functional were too high and the BDEs calculated using the MP2 were too low. If we rank the whole ligands according to their increased bond strength, the resulting orders obtained with the three methods are different for the [Cu-L]+ complexes, the B3LYP giving the same order as the experimental one. This result indicates that the BDEs of [Cu-L]+ complexes are better modeled using the B3LYP than using the BP86 and MP2 methods. For [Cu-L]2+, B3LYP also gave the most reliable results whereas BP86 gave too large BDEs and MP2 gave too small BDEs. However, symmetries of ground states can be different using DFT and post-Hartree-Fock methods. For [Cu-N2O]2+ the use of the B1LYP provides a better symmetry of the complex than the B3LYP, as has been recently shown in the literature for [Cu-H2O]2+. MP2 led to an incorrect bent structure for [Cu-N2]2+ in contrast to a linear structure obtained with the other methods, including CCSD(T). However, due to the lack of experimental data for [Cu-L]2+ complexes and to contrasted results for the methods, it is not possible to conclude definitely. For the high coordinated complexes [Cu(NH3)4]+ and [Cu(NH3)4]2+, the PBE calculation method was used in addition to the BP86, B3LYP and MP2. The BDE values were very close to each other when there is no change of the oxidation state during the reaction. On the basis of these calculations, the choice of the method was less crucial for high coordinated complexes [Cu(NH3)4]+ and [Cu(NH3)4]2+ so long as the oxidation state remained the same during the reaction. In contrast, when [Cu(NH3)4]2+ is reduced in [Cu(NH3)3]+ and NH3, the BDE calculated using the four methods were markedly different.     

Nickel(II) and cobalt(II) complexes of rhodanine

Summary Nickel(II) and cobalt(II) complexes of rhodanine (Hrd) were prepared from the metal chloride or acetate and the ligand. With an excess of NH3, the octahedral [Ni(NH₃)₆](Rd)₂ and [Co(NH₃)₅Rd]Rd complexes are ob-tained; use of only two NH₃ equivalents per metal ion yields the Ni(Rd)₂ sd HRd · NH₃ and [Co(Rd)₂ ] · 1.5 H₂O complexes, the first with tetragonally distorted hexacoordination and the second with polymeric octahedral coordination. By using two equivalents of NaOH per metal ion, the binuclear [Ni(Rd)₂][Ni(Rd)₂ · (HRd)₂] · 2 H₂O complex is formed having one diamagnetic planar and one high spin octahedral chromophore. Rhodanine is coordinated through the thiocarbonylic sulphur in the neutral form and through the thiocarbonylic sulphur and the deprotanated nitrogen atoms in the rhodanidato anionic form.     

Lanthanum(III) chloride complexes with heterocyclic Schiff bases

Condensation of 2-amino-3-carboxyethyl-4,5,6,7-tetrahydrobenzo[b]thiophene with carbonyl compounds such as isatin, o-hydroxyacetophenone or benzoin in 1:1 ratio in ethanol medium yielded three distinctly different heterocyclic Schiff bases viz. 2-(N-indole-2-one)amino-3-carboxyethyl-4,5,6,7-tetrahydrobenzo[b]thiophene (ISAT), 2-(N-o-hydroxyacetophenone)amino- 3-carboxyethyl-4,5,6,7-tetrahydro-benzo[b]thiophene (HAAT) or 2-(N-benzoin)amino-3-carboxyethyl-4,5,6,7-tetrahydrobenzo[b]thiophene (HBAT) respectively. These ligands formed well defined complexes with lanthanum(III) chloride under suitable conditions. The ligands and the complexes have been characterized on the basis of elemental analyses, molar conductance measurements, UV-visible, IR and proton NMR spectral studies. Kinetics and mechanism of the thermal decomposition of the ligands and the metal complexes have been studied using non-isothermal thermogravimetry. Kinetic parameters were calculated for each step of the decomposition reactions using Coats-Redfern equation. The rate controlling process for all the ligands and complexes is random nucleation with the formation of one nucleus on each particle (Mampel equation). Relative thermal stabilities of the ligands and the metal complexes have been compared.     

Nature of the complexes formed by alkali metal halides with phosphine oxides

Reaction of alkali metal halides (MX) with methylenediphosphine oxides and various related compounds in nonaqueous solutions leads to the formation of complex compounds. The compositions, properties, and stabilities of these compounds, which have been studied in detail in acetonitrile, are determined by the nature of the cations and anions of the alkali metal halides. Formation of neutral complexes with the composition [MX · L] and cationic complexes with the composition [ML]⁺ has been established. The most characteristic representative of complexes of the first type is [NaI · L]; in the complexes studied, L=R₂P(O)CH₂P(O)R₂ (R=Bu, BuO, or Ph), Ph₂P(O)CH₂P(O) (OC₂H₅)CH₂P(O)Ph₂ and (p-OCH₃C₆H₄)₂P(O)CH₂P(O)(C₆H₄CF₃-p)₂. Compound [LiL]⁺ is characteristic of complexes of the second type; the compounds containing Ph₃P(O), Ph₂P(O)CH₂P(O)Ph₂, and Ph₂P(O)CH₂P(O)(OC₂H₅)CH₂P(O)Ph₂ as ligands have been studied. Stability constants of the complexes [NaI · L] and [LiL]⁺ have been determined by measuring the dependence of the electrical conductivity of solutions of the alkali metal halides in acetonitrile on the concentration of the ligands. The complex-forming power of phosphine oxides increases with increase in the number of P=O groups. Stabilities of the complexes [NaI · L] with ligands with identical structure decrease with increase in the electronegativity of the substituents on the phosphorus atoms.     

Synthesis and spectral characterization of zinc(II) complexes of N(4)-substituted thiosemicarbazone derived from salicylaldehyde: Structural study of a novel –OH free Zn(II) complex

Five novel zinc(II) complexes of salicylaldehyde 3-hexamethyleneiminyl thiosemicarbazone were synthesized and physico-chemically characterized. The complexes were given the formulae [Zn(HL)₂] (1), [Zn(L)py] (2), [Zn(L)bipy] · 3.5H₂O (3), [Zn(L)phen] · H₂O (4) and [Zn(L)γ-pic] (5). The thiosemicarbazone binds the metal as a dianionic ONS donor ligand in all the complexes, except in 1. Compound 1 is a homoleptic complex with zinc occupying the center of a distorted tetrahedral environment and being coordinated by two azomethine nitrogen and two thiolate sulfur atoms.     

Palladium and platinum dihalide complexes with dl-selenomethionine

Palladium and platinum dihalides react with dl-selenomethionine (sem), yielding the complexes [M(sem)X2](M=Pd,X=Cl or Br;M=Pt,X=Cl) and, in the presence of N,N-dimethylformamide (dmf), the species [M(sem)X2]·dmf (M=Pd, X=I; M=Pt, X=Cl, Br or I). The complexes were characterized by i.r. and proton n.m.r. spectroscopy and by thermogravimetric analysis, and their properties were compared with those of the dl-methionine analogues [M(Met)Cl2] and [Pt(Met)Cl2]·dmf. On the basis of n.m.r. data in deuteriated dimethyl sulfoxide, the platinum complexes undergo ligand rearrangement to form [Pt(sem)2]2+ moieties whereas the solvent does not seem to interact with the palladium coordination sphere, which contains the chelated N, Se ligand.     

Zero- and one-dimensional thioindates synthesized under solvothermal conditions yielding α-In2S3, β-In2S3 or MgIn2S4 as thermal decomposition products

The first cationic thioindate with composition [In(en)₂S]₂·2Cl (zero-dimensional) (1) and the first thioindate being charge compensated by a main group metal complex with composition [Mg(en)₃][In₂S₄] (one-dimensional) (2) have been prepared with ethylenediamine under solvothermal conditions. The main structural motif of [In(en)₂S]₂·2Cl is the centro-symmetric rhomboidal [In(en)₂S]₂²⁺ ring which is formed by S-S edge-sharing of two symmetry related [InN₄S₂] octahedra. The structure of [Mg(en)₃][In₂S₄] is composed of a straight one-dimensional {[InS₂]⁻}_∞ chain surrounded by [Mg(en)₃]²⁺ complexes. Both compounds are wide band-gap semiconductors. The thermal decomposition reaction of [In(en)₂S]₂·2Cl stopped at 500 °C yielded cubic α-In₂S₃ and reflections of β-In₂S₃ are seen in the X-ray powder pattern of the residue obtained at 900 °C. In the case of [Mg(en)₃][In₂S₄] the thiospinel MgIn₂S₄ was identified as decomposition product. The size of the MgIn₂S₄ crystals are in the nanometer range as evidenced by a pronounced broadening of the reflections in the powder pattern and with transmission electron microscopy.     

Trichloro-bridged diruthenium (III,III) complexes: X-ray isomorphous structures of [Ph3X=O···H···O=XPh3][Ru2Cl7(XPh3)2]·0.5(CH2Cl2)(H2O)(X = As or P)

The triply chloro-bridged binuclear complexes [Ph₃X=O···H···O=XPh₃][Ru₂Cl₇(XPh₃)₂]·0.5(CH₂Cl₂)(H₂O) (X = As or P) were obtained from [RuCl₃(XPh₃)₂DMA]·DMA (DMA = dimethylacetamide) CH₂Cl₂/Et₂O solution. The structures were characterized by X-ray diffraction studies. The complexes are formed from two Ru atoms bridged by three chloride anions. The two ruthenium atoms are also coordinated to two non-bridging Cl atoms and an AsPh₃ or PPh₃ ligand respectively. As an interesting feature, the cations of these complexes are protons, trapped in a very short hydrogen bond between two triphenylarsine or triphenylphosphine oxide molecules.     

Cobalt(II) complexes of 5,7-dimethyl[1,2,4]-triazolo-[1,5-a]-pyrimidine. Spectroscopic characterization,XRD study and antimicrobial activity

Summary Several cobalt(II) complexes of 5,7-dimethyl-[1,2,4]-tria-zolo-[1,5-a]-pyrimidine (DMTP) have been prepared and characterized by thermal and spectroscopic techniques. The crystal structure of [Co(DMTP)₂(H₂O)₄]Br₂·2H₂O has been determined by XRD; the metal ion is octahedrally coordinated by two DMTP ligands through the usual N(3) site and four water molecules. Metal binding to N(3) for DMTP is consistent with the electronic properties calculated with the MOPAC programme. All the complexes were screened for their activity against several types of bacteria, showing a broad-spectrum antimicrobial activity.