Round Robin “Impurities in Uranium Matrix”: A Success for CETAMA and IAEA

The safeguard of nuclear material is of paramount importance to the IAEA which increasingly uses this information for characterization purposes in order to strengthen the verification of declared nuclear material and to identify the origin of samples from mines. IAEA tasked CETAMA to conduct a round robin with objective to evaluate the capability of laboratories to measure impurities in uranium with concentration levels between 1 and 500 ppm relative to uranium. This round robin was attended by 17 international laboratories from the nuclear industry and safeguards community. The results are mainly obtained by ICP-MS (14) and ICP-AES (3). The synthesis of this round robin were helpful in identifying anomalies and will allow the IAEA to better set realistic measurement performance targets for ICP-MS and ICP-AES.     

A Certified Reference Material for HPLC

A column and test samples have been produced as a Certified Reference Material (CRM) for use in HPLC. A round robin certification procedure has demonstrated that the retention and relative retention properties of the column, measured as the values of shape selectivity, hydrophobicity and ion-exchange activity at pH 7.0, under closely specified separation conditions, are reproducible irrespective of the instrument and laboratory. Concurrence with the CRM values can be used to confirm that an HPLC system is compliant with these specifications, in particular the mobile phase composition and column temperature. This will enable different laboratories to determine that they are operating under equivalent separation conditions, which is a necessary requirement for the efficient interlaboratory transferability of methods.     

Multielement analysis of coal by ICP techniques using solution nebulization and laser ablation

The combination of inductively coupled plasma atomic emission spectrometry and high resolution inductively coupled plasma mass spectrometry for the determination of 70 elements in coal were studied. Four microwave-assisted digestion procedures with different dissolution mixtures (nitric and hydrofluoric acids, aqua regia and hydrogen peroxide), lithium metaborate fusion with and without previous sample ashing as well as direct sampling by laser ablation (LA) have been tested. Examples of spectral interferences are given and different correction procedures are discussed. Detection limits in the low ng g(-1) range were obtained for most of the elements investigated by using high-purity reagents and by taking special care to prevent sample contamination during preparation. The precision was assessed from replicate analysis (including sample preparation) of coal samples and was found to be, as average values far all elements, 4-5% RSD and 10-15% RSD for procedures including sample digestion and LA sampling, respectively. The accuracy of the overall analytical procedures was estimated by analysis of certified reference materials and of a coal sample obtained from the Interlab Trace round robin test. Among the dissolution mixtures tested, the combination of nitric and hydrofluoric acids with hydrogen peroxide provide the best agreement with certified, recommended, literature-compiled or consensus values, though fusion is necessary to obtain quantitative recoveries for Si, Cr, Hf, W, Zr, Y. In general, results obtained by LA fall within +/-20% of those obtained after digestion.     

International Measurement Evaluation Programme: IMEP-9, trace elements in water

The International Measurement Evaluation Programme (IMEP) is an interlaboratory comparison scheme, founded, owned and coordinated by the Institute for Reference Materials and Measurements (IRMM) since 1988. IMEP-9 is the third round of trace elements in water evaluation following IMEP-3 and IMEP-6. Reference values for 15 elements stating total concentrations and combined uncertainties (according to GUM) were established. The reference values were established mainly by isotope dilution mass spectrometry (IDMS) as a primary method of measurement, and values traceable to the SI were obtained. The four elements that could not be certified by IDMS were assigned values by means of other measurement techniques. Results from 201 laboratories from 35 countries and four continents were evaluated against the reference values and the comparability between the laboratories is presented graphically.     

Development of a proficiency testing scheme for a limited number of participants in the field of natural water analysis

A proficiency testing (PT) scheme was developed for a limited number of analytical laboratories participating in the analysis of natural water in Israel. Three fit-for-intended-use reference materials (RMs) were prepared for a pilot PT from natural water: RM-blank and two in-house reference materials (IHRMs) with seven analytes fortified to achieve different levels of analyte concentrations. The measurands for the PT participants were the traceable spike values certified in the IHRMs, i.e., added mass concentrations of the analytes. The RM-blank and IHRMs were found to be homogeneous and stable over 11 days, the time necessary for the experimental part of the PT. The RMs were distributed to the PT participants as unknown test items similar to routine samples. The test results were evaluated using their deviations from the IHRM-certified values. Eight Israeli laboratories took part in the interlaboratory comparison. Individual laboratory performance and metrological compatibility of the PT results of the participants, as a local group of laboratories, were evaluated for every analyte.     

Interlaboratory assessment of measurement precision and bias in the coulometric Karl Fischer determination of water

The precision and bias of the coulometric Karl Fischer ASTM method D1533-00 have been assessed in a collaborative ASTM round robin program for a group of 34 laboratories. The test materials used in this study included water saturated 1-octanol (WSO), water saturated 1-butanol (WSB), and a series of new and used transformer oil samples. Fundamental systematic biases have been demonstrated in the accuracy of the measurement of water in the WSO, WSB, and transformer oil samples. The systematic bias in the measurement of the WSO and WSB standards indicates that for some laboratories either the instruments were not accurate or the quantity of the standard was not measured accurately. A second type of systematic bias consisted of measurement errors associated with the selection of the Karl Fischer solvent that was used with each instrument, and this was superimposed upon the error in the measurement of the water in the standards. Using the statistical calculation method ASTM D 6300 the repeatability and reproducibility for water in transformer oil were found to be 7 mg/kg and 14 mg/kg respectively. The method detection limit of water was 8 mg/kg oil. The method bias was estimated based on the National Institute of Standards and Technology (NIST) Standard Reference Material (SRM) 2890, WSO, since no suitable reference material for water in transformer oil was available for this study.     

Evaluation of a dedicated gas chromatography-mass spectrometry method for the analysis of phenols in water

The increasing need to routinely analyse phenolic hydrocarbons in aqueous samples was addressed by the development and implementation of a state-of-the-art, though relatively straightforward, analytical procedure. The proposed method is based on acetic anhydride derivatisation of the native phenols, liquid-liquid extraction of the corresponding phenyl acetate esters and subsequent analysis by GC-MS. The key feature and main strength of the method is located at the injection step which applies 'at-once' large volume injection with a programmable temperature vaporizer (PTV)-type injector. In the proposed method, the sensitivity gain inherent to the higher injection volume was used entirely to proportionally miniaturize, considerably accelerate and effectively simplify the otherwise tedious and time-consuming derivatisation/extraction step. Method performance, as expressed in terms of repeatability, reproducibility, linearity and accuracy, was found to be excellent. R.S.D. values, determined in the framework of an extensive reproducibility study, ranged between 1.47 and 9.02%. Detection limits were in the low ng/L range for all compounds with linear ranges extending up to two orders of magnitude. Method accuracy was determined by analyzing a certified reference material (PH- 1JM), spiked water samples and participating in a series of round robin tests and did not reveal any significant bias for the different compounds under investigation.     

Accuracy and reliability of radiometric measurements – results of a laboratory proficiency test with labelled sediment

 In 1995, a laboratory proficiency test was carried out in Germany with labelled sediment which was analyzed by 40 participants (operators of nuclear power plants, officially authorized institutions of the German Federal States, and laboratories of research centers). Preparation and certification of the labelled material were described in detail. The deviations of the laboratory means from the corresponding certified reference values of ten radionuclides were determined. Outliers of type 2 were recognized by means of the Grubbs test and eliminated. The consistency of laboratory means and reference values was tested by a modified t test. To describe the reliability of the measurements performed, a radioanalytical quality index which has been defined elsewhere was used. By use of this index, the radioanalytical quality of laboratory means and the means of laboratory means could be evaluated and a very realistic picture of the "state-of-the-practice" of the participating laboratories obtained. In some cases, it was possible to identify systematic errors and to explain their causes by physical phenomena. Received: 11 June 1996 Accepted: 14 September 1996