Studies on the extraction of sulfonamides from agricultural soils

The extraction of six sulfonamides (sulfadiazine, sulfadimidine, sulfathiazole, sulfachloropiridazine, sulfadimethoxine, and sulfaquinoxaline) from soils with different physicochemical characteristics and at several aging times was investigated. Conventional mechanical shaking, microwave-assisted extraction, ultrasound probe-assisted extraction and pressurized liquid extraction techniques were evaluated. The four techniques provided similar results when applied to freshly contaminated soils. However, microwave-assisted extraction was the most suitable to extract sulfonamide aged residues from soils. Microwave-assisted extraction was applied to eight soils aged for 3 months, using acetonitrile:buffer pH 9 (20:80) as the extraction solvent, and recoveries ranged from 15–25% for STZ to 42–64% for SDM.     

A comparative study of solvent extraction of total petroleum hydrocarbons in soil

Three non-specific methods for the extraction of total petroleum hydrocarbons (TPH) from soil into organic solvent were compared. The techniques used for sample preparation were Soxhlet extraction, closed-vessel microwave-assisted extraction, and CEN shake extraction. The total concentrations of extracted compounds in the boiling point range of C10–C40 were determined by gas chromatography with flame ionization detection. The best recovery (99%) and repeatability (±3%) from standard oil mixtures were obtained with microwave-assisted extraction. However, the different extraction methods exhibited different behaviour when spiked soil samples were extracted. The best repeatability was obtained with CEN shake extraction (±6%) but the repeatability values for Soxhlet and microwave-assisted methods were quite high (>20%). However, the larger uncertainties of the latter extraction methods does not necessarily limit the applicability of these methods to the determination of petroleum hydrocarbons in soil, as in the assessment of soil contamination the expanded uncertainty of the result is usually not limited by analytical uncertainty, but rather by the uncertainty of the primary sampling stage. However, distinctive variation found in the chromatographic profiles illustrates that discretion should be obeyed when chromatograms obtained after application of different extraction methods on petroleum contaminated samples are to be used in the fingerprinting or age dating studies. Otherwise, misleading conclusions concerning the age of spillage could be drawn.     

Optimization of Microwave-Assisted Extraction for the Determination of Organic Flame Retardants in Acrylonitrile Butadiene Styrene

The efficiency of microwave-assisted extraction was evaluated for the determination of flame retardants in acrylonitrile butadiene styrene by optimization of the temperature, time, and solvent. A quality control sample containing 500 milligrams per kilogram Dechlorane Plus, 1000 milligrams per kilogram tetrabromobisphenol A, and 1000 milligrams per kilogram triphenyl phosphate was employed. The flame retardant concentrations obtained by microwave-assisted extraction at 120 degrees Celsius for ten minutes in tetrahydrofuran were in agreement with those for the quality control sample. The efficiency of microwave-assisted extraction was comparable to ultrasonic and Soxhlet extraction used as reference techniques. In addition, the repeatabilities of the analyses, represented as relative standard deviations, were comparable: 0.8–3.4 percent for microwave-assisted extraction, 0.3–3.3 percent for ultrasonic extraction, and 0.2–8.5 percent for Soxhlet extraction. These results suggest that microwave-assisted extraction is suitable for the determination of Dechlorane Plus, tetrabromobisphenol A, and triphenyl phosphate in acrylonitrile butadiene styrene.     

Microwave-assisted extraction: a simpler and faster method for the determination of ethyl glucuronide in hair by gas chromatography–mass spectrometry

Alcohol is the most frequently abused “addictive substance” that causes serious social problems throughout the world; thus, alcoholism is of particular interest in clinical and forensic medicine. Alcohol biomarkers are physiological indicators of alcohol exposure or ingestion and may reflect the presence of an alcohol use disorder. The glucuronide conjugation is a minor pathway of ethanol metabolism. Ethyl glucuronide (EtG) is a marker of recent alcohol consumption that detects alcohol use reliably over a definite time period. The present paper describes a new method for the determination of EtG in hair. It is based both in the microwave-assisted extraction (MAE), to extract the analyte from hair samples, and gas chromatography–mass spectrometry (GC-MS), to identify and quantify the EtG in selected ion monitoring (SIM) mode. The method was applied to 15 hair samples from occasional alcohol users, obtaining positive results in all cases. It was fully validated, including a linear range (0.3–10 ng/mg) and the main precision parameters. In summary, the use of microwave-assisted extraction turned out to be a substantially simpler, faster, and a more sensitive procedure than any other conventional sample preparations.     

Application of non-ionic surfactant in the microwave-assisted extraction of alkaloids from Rhizoma Coptidis

The feasibility of employing non-ionic surfactant oligoethylene glycol monoalkyl ether (Genapol X-080) as an alternative and effective solvent for the microwave-assisted extraction of alkaloids from Rhizoma Coptidis was demonstrated. When compared with commonly used solvents, 5% Genapol X-080 enhanced the extraction efficiency. Under optimal conditions, i.e. 5% acidified Genapol X-080 (v/v), microwave-assisted extraction for 10 min at 100 °C, the extraction recovery of alkaloids reached 92.8% in a one-step extraction. The efficiency of cloud-point preconcentration of three alkaloids was in the range 93.6-94.7% with relative standard deviation lower than 3.3% by the proposed procedure. Furthermore, the combination of microwave-assisted extraction and cloud-point extraction was shown to be a green, rapid and effective approach for alkaloids preconcentration of Rhizoma Coptidis samples.     

Towards more rational techniques for the isolation of valuable essential oils from plants

Attention is drawn to the use of new and clean alternative methods for the isolation of essential oils from plants. A critical overview is presented of conventional methods (based on either organic solvent extraction or distillation) and new alternatives (including microwave-assisted extraction (MAE) as well as supercritical CO₂ (SC-CO₂) extraction and subcritical water extraction). The advantages and disadvantages of each technique are reported and special emphasis is given to the use of continuous subcritical water extraction which emerges as clearly advantageous over conventional techniques (by avoiding the use of organic solvents and considerably shortening the extraction time, as well as increasing the efficiency) and recent techniques, such as MAE (by increasing the efficiency) and SC-CO₂ extraction (by avoiding the co-extraction of cuticular waxes and lipids and the need for a sample drying stage prior to extraction).     

微波辅助-旋转回流提取叶下珠中的没食子酸

A new kind of microwave-assisted circumrotation reflux extraction device was constructed and used to study the extraction technology of gallic acid from phyllanthus urmaria L.The extraction principle of the device was same as that of microwave-assisted solvent extraction but using circumrotation techniques as auxiliary stirrer to accelerate the process.Capillary electrophoresis was used to determinate gallic acid in phyllanthus urmaria L extracts in order to evaluate the extraction efficiency of the method.It was found that the most important factors influencing extraction gallic acid were solvent kind and microwave power.The optimum extraction conditions were as follows:water using as irradiate time 4 minute.Under the optimum extraction conditions,five experiments were carried out and the average extraction rate of gallic acid in phyllanthus urmaria L was 4.32 mg/g,relative standard deviations (R.S.D.) was 2.2%.Compared with other extraction methods e.g.reflux extraction and microwave-assisted extraction,better extraction efficiency was observed for the microwave-assisted circumrotation reflux extraction.     

Comparison of extraction techniques for isolation of steroid oestrogens in environmentally relevant concentrations from sediment

The comparison of four extraction techniques for isolation of five native and one labelled steroid oestrogens from sediment was described. The three conventional extraction techniques Soxhlet warm extraction (SWE), accelerated solvent extraction (ASE), microwave-assisted extraction (MAE) and a promising technique QuEChERS were tested for isolation of low environmentally relevant oestrogen concentrations using different extraction conditions. The least expensive and time-consuming method QuEChERS provided the best extraction recoveries (53–84%) from all techniques. MAE achieved the highest recovery from conventional techniques for less polar oestrogens using dichloromethane: acetone 3:1 mixture as an extraction solvent (50–71%), but for extraction of the whole group of oestrogens including more polar estriol acetone or methanol must be used. ASE provided higher extraction recoveries using dichloromethane at 60°C (53–74%) for less polar oestrogens. However, the repeatability of results was unsatisfactory and recoveries using other extraction conditions were lower than for MAE. The most time-consuming SWE achieved the worst extraction recoveries and for isolation of low oestrogen concentrations from sediments, it is completely unsuitable.     

Evaluation of soybean seed protein extraction focusing on metalloprotein analysis

Two methods of protein extraction for soybean seeds were evaluated in terms of preservation of the metal ions bound to proteins after the extraction and separation procedures. The proteins were firstly separated according to their molar masses by polyacrylamide gel electrophoresis. Then, the protein bands were mapped by synchrotron radiation X-ray fluorescence in order to establish which metal ions were present in each one. Finally, some mapped protein bands were decomposed by microwave-assisted combustion and Ca, Cu, K, Mg, Mn, and Zn were quantified by inductively coupled plasma mass spectrometry or inductively coupled plasma optical emission spectrometry. The extraction methods studied were Method A (based on the treatment of ground soybean seeds with hexane and their extraction with Tris–HCl and β-mercaptoethanol) and Method B (based on the treatment of ground soybean seeds with petroleum ether and their extraction with Tris–HCl, dithiothreitol, phenylmethanesulfonyl fluoride, sodium dodecyl sulfate and potassium chloride). The best method was Method B, in which a 78% higher extraction efficiency was obtained when compared to Method A. Additionally, the metal-protein interactions were more appropriately preserved when Method B was applied, where the most affected ions were those that are bound weakly to proteins, such as Ca, K, and Mg.     

Focused microwave-assisted Soxhlet extraction of acorn oil for determination of the fatty acid profile by GC–MS. Comparison with conventional and standard methods

A study of the feasibility of focused microwave-assisted Soxhlet extraction of acorn oil and comparison of results from analysis of trans fatty acids in the oil thus obtained with those for oils obtained by use of other methods commonly used for oil extraction are reported here. The proposed method was optimized by means of a 21-experiment screening design to determine, by means of a reduced number of experiments, which factors affect both extraction efficiency and the degree of unsaturation of the fatty acids in the oil. The proposed method enables total extraction of the fatty acids in 30 min, which is much less than the time required by the Folch (4.5 h), Soxhlet (16 h), and ISO (8 h) reference methods and the stirring–extraction method (56 h). The efficiency of extraction achieved by use of the proposed method is statistically equivalent to that achieved by use of the other methods; the composition of the extracts obtained by use of the proposed method and the Folch and stirring reference methods are also statistically similar. No trans fatty acids were present in the extracts obtained by use of the Folch, stirring, and proposed methods but they were detected in the extracts obtained by use of both the Soxhlet and ISO methods.     

Extraction of trace organic pollutants from aqueous samples by a single drop method

Summary A single drop extraction method for isolation of trace organic pollutants from aqueous samples is described. The optimisation of extraction parameters such as drop volume, temperature, time and solvent type, on the extraction efficiency was investigated. This technique involves use of small amounts of organic solvent (2μL) in a conventional GC syringe. The analytical performance of this technique is presented for the determination of trichlorobenzene and trichloromethane. Suitable precision of extraction was obtained with RSD values in the range of 2.5–5.2%. Presented at Balaton Symposium on High Performance Separation Methods, Siófok Hungary, September 1–3, 1999     

RP-HPTLC densitometric determination and validation of vanillin and related phenolic compounds in accelerated solvent extract of Vanilla planifolia*

A simple, fast and sensitive RP-HPTLC method is developed for simultaneous quantitative determination of vanillin and related phenolic compounds in ethanolic extracts of Vanilla planifolia pods. In addition to this, the applicability of accelerated solvent extraction (ASE) as an alternative to microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE) and Soxhlet extraction was also explored for the rapid extraction of phenolic compounds in vanilla pods. Good separation was achieved on aluminium plates precoated with silica gel RP-18 F(254S) in the mobile phase of methanol/water/isopropanol/acetic acid (30:65:2:3, by volume). The method showed good linearity, high precision and good recovery of compounds of interest. ASE showed good extraction efficiency in less time as compared to other techniques for all the phenolic compounds. The present method would be useful for analytical research and for routine analysis of vanilla extracts for their quality control.     

Microwave extraction of phthalate esters from marine sediment and soil

Summary As part of an on-going ASEAN⁺⁾-Canada Cooperative Programme on Marine Science, microwave-assisted solvent extraction has been employed for the extraction of six phthalate esters from marine sediment and soil samples. Five of the six esters studied are among the United States Environmental Protection Agency's list of top priority pollutants. The effects of extraction solvent, extraction temperature, duration of extraction and extraction volume on the mean recoveries of the six phthalate esters were quantitatively evaluated by means of an analysis of variance, followed by testing the differences among the level means for each condition with least significant difference method. Microwave-assisted solvent extraction allowed comparable or higher recoveries of the six phthalate esters (70.1–91.0%) in comparison with conventional soxhlet (65.5–89.5%) and sonication (64.6–88.6%). The precision of results by microwave-assisted solvent extraction was improved significantly compared to the conventional techniques. The microwave extraction system has many advantages over the soxhlet and sonication extraction, e.g., no laborious clean-up procedure, lower usage of hazardous organic solvent, and larger sample throughput. The technique has been employed for the analysis of native marine sediment and soil samples in Singapore.     

微波辅助-旋转回流提取仪的组装及其在叶下珠有机酸提取中的应用

组装了一种新型的微波辅助旋转回流装置,该装置的基本原理与微波辅助溶剂萃取的原理相同,但采用了旋转的技术以加速提取.应用该装置以正交实验筛选优化叶下珠中有机酸的提取工艺,并利用毛细管电泳技术分离测定了提取液中有机酸的含量以评价提取效果.最佳提取工艺:乙醚为溶剂,微波功率800 W,提取时间4 min,溶剂用量300 mL.在该提取条件下,平行5次提取叶下珠中丁二酸、原儿茶酸、没食子酸、咖啡酸、阿魏酸的平均含量分别为42.2、103.5、436.2、123.8、67.4 μg/g,相对标准偏差为0.87% ～3.7%,加标回收率为94% ～104%.将该法与常规的微波辅助提取法及回流提取法进行比较,结果表明,微波辅助旋转回流提取法提取效率明显优于其它2种方法.     

Ionic liquid-based ultrasonic/microwave-assisted extraction combined with UPLC-MS-MS for the determination of tannins in Galla chinensis

Ionic liquid was used as extraction solvents and applied to the extraction of tannins from Galla chinensis in the simultaneous ultrasonic- and microwave-assisted extraction (UMAE) technique. Several parameters of UMAE were optimised, and the results were compared with of the conventional extraction techniques. Under optimal conditions, the content of tannins was 630.2?±?12.1?mg?g?1. Compared with the conventional heat-reflux extraction, maceration extraction, regular ultrasound- and microwave-assisted extraction, the proposed approach exhibited higher efficiency (11.7-22.0% enhanced) and shorter extraction time (from 6?h to 1?min). The tannins were then identified by ultraperformance liquid chromatography tandem mass spectrometry. This study suggests that ionic liquid-based UMAE is an efficient, rapid, simple and green sample preparation technique.     

A novel application of microwave-assisted extraction of polyphenols from brewer’s spent grain with HPLC-DAD-MS analysis

This paper reports a novel application of microwave-assisted extraction (MAE) of polyphenols from brewer’s spent grains (BSG). A 2⁴ orthogonal composite design was used to obtain the optimal conditions of MAE. The influence of the MAE operational parameters (extraction time, temperature, solvent volume and stirring speed) on the extraction yield of ferulic acid was investigated through response surface methodology. The results showed that the optimal conditions were 15 min extraction time, 100 °C extraction temperature, 20 mL of solvent, and maximum stirring speed. Under these conditions, the yield of ferulic acid was 1.31 ± 0.04% (w/w), which was fivefold higher than that obtained with conventional solid–liquid extraction techniques. The developed new extraction method considerably reduces extraction time, energy and solvent consumption, while generating fewer wastes. HPLC-DAD-MS analysis indicated that other hydroxycinnamic acids and several ferulic acid dehydrodimers, as well as one dehydrotrimer were also present, confirming that BSG is a valuable source of antioxidant compounds.     

Microwave-assisted micellar extraction coupled with solid-phase extraction for preconcentration of pharmaceuticals in molluscs prior to determination by HPLC

A simple and specific analytical method was developed and tested for the determination of pharmaceuticals in mollusc samples. A combination of microwave-assisted micellar extraction (MAME) and solid-phase extraction (SPE) using a non-ionic surfactant, polyoxyethylene 10 lauryl ether, was examined to extract and determine simultaneously a group of pharmaceuticals such as carbamazepine, clorfibric acid, ketoprofen, naproxen, bezafibrate and ibuprofen by liquid chromatography using UV-diode array detector. The MAME extraction performance was evaluated by studying various parameters such as the volume and concentration of surfactant and microwave conditions. Finally, an OASIS HLB cartridge was used as an optimum SPE sorbent to clean up the extracts and preconcentrate the selected analytes. The proposed method showed satisfactory linearity and reproducibility (between 3 and 15%), as well as detection limits ranging from 30 to 220 ng/g. Finally, the method was successfully applied to the determination of the target pharmaceuticals in various kinds of mollusc samples. This study has demonstrated that microwave-assisted micellar extraction with solid-phase extraction may be used as a viable alternative to conventional methods for the extraction of pharmaceuticals in this type of matrices.     

Extraction of Peppermint Essential Oils and Lipophilic Compounds: Assessment of Process Kinetics and Environmental Impacts with Multiple Techniques

Consumers are becoming more mindful of their well-being. Increasing awareness of the many beneficial properties of peppermint essential oil (EO) has significantly increased product sales in recent years. Hydrodistillation (HD), a proven conventional method, and a possible alternative in the form of microwave-assisted hydrodistillation (MWHD) have been used to isolate peppermint EO. Standard Soxhlet and alternatively supercritical fluid (SFE), microwave-assisted, and ultrasound-assisted extraction separated the lipid extracts. The distillations employed various power settings, and the EO yield varied from 0.15 to 0.80%. The estimated environmental impact in terms of electricity consumption and CO₂ emissions suggested that MWHD is an energy efficient way to reduce CO₂ emissions. Different extraction methods and solvent properties affected the lipid extract yield, which ranged from 2.55 to 5.36%. According to the corresponding values of statistical parameters, empiric mathematical models were successfully applied to model the kinetics of MWHD and SFE processes.     

Phenolic Profile,Antioxidant Capacity and Antimicrobial Activity of Nettle Leaves Extracts Obtained by Advanced Extraction Techniques

Nettle is a widely known plant whose high biological activity and beneficial medicinal effects are attributed to various bioactive compounds, among which polyphenols play an important role. In order to isolate polyphenols and preserve their properties, advanced extraction techniques have been applied to overcome the drawbacks of conventional ones. Therefore, microwave-assisted extraction (MAE) has been optimized for the isolation of nettle leaves polyphenols and it was compared to pressurized liquid extraction (PLE) and conventional heat-reflux extraction (CE). The obtained extracts were analyzed for their individual phenolic profile by UPLC MS² and for their antioxidant capacity by ORAC assay. MAE proved to be the more specific technique for the isolation of individual phenolic compounds, while PLE produced extracts with higher amount of total phenols and higher antioxidant capacity. Both techniques were more effective compared to CE. PLE nettle extract showed antimicrobial activity against bacteria, especially against Gram-negative Pseudomonas fragi ATCC 4973 and Campylobacter jejuni NCTC 11168 strains. This suggests that PLE is suitable for obtaining a nettle extract with antioxidant and antimicrobial potential, which as such has great potential for use as a value-added ingredient in the food and pharmaceutical industry.