Kinetics and reactivities of ruthenium(III)- and osmium(VIII)-catalyzed oxidation of ornidazole with chloramine-T in acid and alkaline media: A mechanistic approach

Ornidazole is an antiparasitic drug having a wide spectrum of activity. Literature survey has revealed that no attention has been paid towards the oxidation of ornidazole with any oxidant from the kinetic and mechanistic view point. Also no one has examined the role of platinum group metal ions as catalysts in the oxidation of this drug. Such studies are of much use in understanding the mechanistic profile of ornidazole in redox reactions and provide an insight into the interaction of metal ions with the substrate in biological systems. For these reasons, the Ru(III)- and Os(VIII)-catalyzed kinetics of oxidation of ornidazole with chloramine-T have been studied in HCl and NaOH media, respectively at 313 K. The oxidation products and kinetic patterns were found to be different in acid and alkaline media. Under comparable experimental conditions, in Ru(III)-catalyzed oxidation the rate law is −d[CAT]/dt = k [CAT]_o[ornidazole]_o^x[H⁺]^−y[Ru(III)]^z and it takes the form −d[CAT]/dt = k [CAT]_o[ornidazole]_o^x[OH⁻]^y[Os(VIII)][ArSO₂NH₂]^−z for Os(VIII)-catalyzed reaction, where x, y and z are less than unity. In acid medium, 1-chloro-3-(2-methyl-5-nitroimidazole-1-yl)propan-2-one and in alkaline medium, 1-hydroxy-3-(2-methyl-5-nitroimidazole-1-yl)propan-2-one were characterized as the oxidation products of ornidazole by GC–MS analysis. The reactions were studied at different temperatures and the overall activation parameters have been computed. The solvent isotope effect was studied using D₂O. Under identical set of experimental conditions, the kinetics of Ru(III) catalyzed oxidation of ornidazole by CAT in acid medium have been compared with uncatalyzed reactions. The relative rates revealed that the catalyzed reactions are about 5-fold faster whereas in Os(VIII) catalyzed reactions, it is around 9 times. The catalytic constant (K_C) has been calculated for both the catalysts at different temperatures and activation parameters with respect to each catalyst have been evaluated. The observed experimental results have been explained by plausible mechanisms. Related rate laws have been worked out.     

Spectral and Mechanistic Investigation of the Osmium(VIII) Catalyzed Oxidation of Diclofenac Sodium by the Copper(III) Periodate Complex in Aqueous Alkaline Medium

The kinetics of the osmium(VIII) (Os(VIII)) catalyzed oxidation of diclofenac sodium (DFS) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium has been studied spectrophotometrically at a constant ionic strength of 1.0 mol⋅dm⁻³. The reaction showed first order kinetics in [Os(VIII)] and [DPC] and less than unit order with respect to [DFS] and [alkali]. The rate decreased with increase in [periodate]. The reaction between DFS and DPC in alkaline medium exhibits 1:2 [DFS]:[DPC] stoichiometry. However, the order in [DFS] and [OH⁻] changes from first order to zero order as their concentration increases. Changes in the ionic strength and dielectric constant did not affect the rate of reaction. The oxidation products were identified by LC-ESI-MS, NMR, and IR spectroscopic studies. A possible mechanism is proposed. The reaction constants involved in the different steps of the mechanism were calculated. The catalytic constant (K _C) was also calculated for Os(VIII) catalysis at the studied temperatures. From plots of log ₁₀ K _C versus 1/T, values of activation parameters have been evaluated with respect to the catalytic reaction. The activation parameters with respect to the slow step of the mechanism were computed and discussed, and thermodynamic quantities were also determined. The active osmium(VIII) and copper(III) periodate species have been identified.     

Ruthenium(III) catalysed oxidation of glycerol by acidified KBrO3: a kinetic study

Kinetic investigations on the Ru^III-catalysed oxidation of glycerol by an acidified solution of KBrO₃ in the presence of Hg(OAc)₂ as a scavenger have been carried out in the 30–50 °C range. First order kinetics in the lower KBrO₃ concentration range tended to zero order at higher concentrations. The reaction follows zero order kinetics in glycerol and [H⁺]; the order is one with respect to [Ru^III]. An increase in [Cl^–] showed a positive effect, while addition of NaClO₄ has a negligible effect on the reaction rate. Hg(OAc)₂ and D₂O have an insignificant effect on the reaction rate. A suitable mechanism in conformity with the kinetic observations has been proposed and thermodynamic parameters computed.     

Electrochemical and DNA-binding properties of dipyridophenazine complexes of osmium(II)

A transition metal complex as an electrochemical probe of a DNA sensor must have an applicable redox potential, high binding affinity and chemical stability. Some complexes with the dipyrido[3,2-a:2′,3′-c]phenazine (DPPZ) ligand have been reported to have high binding affinity for DNA. However, it was difficult to detect the targeted DNA electrochemically using these complexes because of the relatively high redox potential. In this work, a combination of bipyridine ligands with functional groups (---NH₂, ---CH₃ and ---COOH) and the DPPZ ligand were studied. The introduction of electron-donating groups was effective for controlling the redox potential of the DPPZ-type osmium complex. The [Os(DA-bpy)₂DPPZ]²⁺ complex (DA-bpy; 4,4′-diamino-2,2′-bipyridine) had a lower half-wave potential (E_1/2) of 147 mV (vs. Ag AgCl) and higher binding affinity with DNA {binding constant, K=3.1×10⁷ M⁻¹ in 10 mmol dm⁻³ Tris–HCl buffer with 50 mmol dm⁻³ NaCl (pH 7.76)} than those of other complexes. With the single stranded DNA (ssDNA) modified gold electrode, the hybridization signal (ΔI) of the [Os(DA-bpy)₂DPPZ]²⁺ complex was linear in the concentration range of 1.0 pg ml⁻¹–0.12 μg ml⁻¹ for the targeted DNA with a regression coefficient of 0.999. The detection limit was 0.1 pg ml⁻¹.     

Preparation of a novel clay/metal complex hybrid film and its catalytic oxidation to chiral 1,1-binaphthol

An ITO electrode modified with a hybrid film of chiral metal complex (Λ-[Os(phen)₃]²⁺) and a clay (montmorillonite) has been prepared for the purpose of chiral sensing. As a first step, a floating monolayer of amphiphilic Os(II) complex, [Os(phen)₂(dC18bpy)](ClO₄)₂ (phen=1,10-phenanthroline, dC18bpy=4,4^′-dioctadecyl-2,2^′-bipyridyl), was formed on an aqueous dispersion of sodium montmorillonite. The monolayer acted as an organic part for the hybridization of clay particles in an aqueous phase. The hybrid film of clay and amphiphilic metal complex was transferred onto an indium tin oxide (ITO) substrate by the vertical dipping method. The next step was to immerse the electrode in chloroform, during which the amphiphilic Os(II) complex was removed from the clay surface. Thereafter the electrode was immersed in an aqueous solution of 0.5 mM Λ-[Os(phen)₃](ClO₄)₂ and rinsed with water. Cyclic voltammetric measurements were performed at each step of the above procedures. When the observed curves were simulated on the basis of a double-layered modified electrode, the electron transfer rate constant (k₁) for Λ-[Os(phen)₃]²⁺/Λ-[Os(phen)₃]³⁺ was determined to be 0.25 s⁻¹. This Os^II/Os^III redox couple was found to mediate the electrochemical oxidation of chiral 1,1^′-2-binaphthol in a stereoselective way: i.e., the S-isomer was oxidized at a 1.4 times higher rate than the R-isomer.     

Thermodynamic quantities for the different steps involved in the mechanism of osmium(VIII) catalysed oxidation of l-lysine by a new oxidant,diperiodatoargentate(III) (stopped flow technique)

The kinetics of Os(VIII) catalysed oxidation of l-lysine by diperiodatoargentate(III) (DPA) in alkaline medium at T = 298 K and a constant ionic strength of 0.50 mol · dm^?3 was studied spectrophotometrically. The oxidation products are aldehyde (5-aminopentanal) and Ag(I). The stoichiometry is i.e. [l-lysine]:[DPA] = 1:1. The reaction is of first order in [Os(VIII)] and [DPA] and is less than unit order in both [l-lys] and [alkali]. Addition of periodate has no effect on the reaction. Effect of added products, ionic strength, and dielectric constant of the reaction medium have been investigated. The oxidation reaction in alkaline medium has been shown to proceed via a Os(VIII)-l-lysine complex, which further reacts with one molecule of deprotonated DPA in a rate determining step followed by other fast steps to give the products. The main products were identified by spot test, IR, and GC-MS. The reaction constants involved in the different steps of the mechanism are calculated at different temperatures. The catalytic constant (K_C) was also calculated at different temperatures. From the plots of lg K_C versus 1/T, values of activation parameters with respect to the catalyst have been evaluated. The activation parameters with respect to slow step of the mechanism are computed and discussed and thermodynamic quantities are also determined. The active species of catalyst and oxidant have been identified.     

Kinetics of the oxidation of aliphatic aldehydes by Os(VIII) in alkaline solution

Kinetics of oxidation of six aliphatic aldehydes by Os(VIII) in alkaline solutions have been studied. The reaction is of first order with respect to each of the aldehyde and Os(VIII). The pseudo-first order rate constants decreased with an increase in the concentration of hydroxyl ions. The oxidation of deuterioacetaldehyde (MeCDO) exhibited a substantial primary kinetic isotope effect. Separate rate constants for the oxidation of hydrate and free aldehyde forms have been evaluated. The aldehyde hydrate is postulated as the active reductant. Ionic strength has no noticable effect on the rate. The rate-determining step is, therefore, postulated to be a bimolecular reaction between the aldehyde hydrate and [OsO₄(OH)₂]^?2. The value of the limiting rate constant exhibited an excellent correlation with Taft σ* values; reaction constant being negative. A mechanism involving transfer of a hydride ion from the aldehyde hydrate to Os(VIII) has been proposed.     

Kinetics and mechanism of Os(VIII)-catalyzed hexacyanoferrate(III) oxidation of α amino acids in alkaline medium

The kinetics of the Os(VIII)-catalyzed oxidation of glycine, alanine, valine, phenylalanine, isoleucine, lycine, and glutamic acid by alkaline hexacyanoferrate(III) reveal that these reactions are zero order in hexacyanoferrate(III) and first order in Os(VIII). The order in amino acid as well as in alkali is 1 at [amino acid] ?2.5 × 10^?2M and [OH^?] ?1.3 × 10^?M, but less than unity at higher concentrations of amino acids or alkali. The active oxidizing species under the experimental conditions is OsO₄(H₂O) (OH)^?. The ferricyanide is merely used up to regenerate the Os(VIII) species from Os(VI) formed during the reaction. The structural influence of amino acids on the reactivity has been discussed. The amino acids during oxidation are shown to be degraded through intermediate keto acids. The kinetic data are accommodated by considering the interaction between the conjugate base of the amino acids and the active oxidizing species of Os(VIII) to form a transient complex in the primary rate-determining step. The catalytic effect of hexacyanoferrate(II) has been rationalized.     

Vanadium(III) Complexes with Picolinic Acid and Dipicolinic Acid in Aqueous Solution

The complex species formed in aqueous solution (25 ^∘C, I = 3.0 mol-dm⁻³ KCl ionic medium) between V³⁺ cation and the ligands: picolinic acid (Hpic, HL) and dipicolinic acid (H₂dipic, H₂L), have been studied potentiometrically and by spectrophotometric measurements. The application of the least-squares computer program LETAGROP to the experimental emf (H) data, taking into account the hydrolytic species of V³⁺ ion, indicates that under the employed experimental conditions, the formation of the complexes [VL]²⁺, [V(OH)L]⁺, [VL₂]⁺, [VL₃], [V₂OL₄] with picolinic acid and the complexes [VL]⁺, [V(OH)L], [V(OH)₂L]⁻, [V(HL)(L)], and [VL₂]⁻ with dipicolinic acid were observed. The stability constants of the complexes formed were determined by potentiometric measurements, and spectrophotometric measurements were done in order to perform a qualitative characterization of the complexes formed in aqueous solution.     

Osmium(VIII) catalysed and uncatalysed oxidation of aspirin drug by diperiodatocuprate(III) complex in aqueous alkaline medium: A mechanistic approach

The kinetics of oxidation of a non-steroidal analgesic drug, aspirin (ASP) by diperiodatocuprate(III)(DPC) in the presence and absence of osmium(VIII) have been investigated at 298 K in alkaline medium at a constant ionic strength of 0.10 mol dm⁻³ spectrophotometrically. The reaction showed a first-order in [DPC] and less than unit order in [ASP] and [alkali] for both the osmium(VIII) catalysed and uncatalysed reactions. The order with respect to Os(VIII) concentration was unity. The effects of added products, ionic strength, periodate and dielectric constant have been studied. The stoichiometry of the reaction was found to be 1:4 (ASP:DPC) for both the cases. The main oxidation product of aspirin was identified by spot test, IR, NMR and GC–MS. The reaction constants involved in the different steps of the mechanisms were calculated for both reactions. Activation parameters with respect to slow step of the mechanisms were computed and discussed for both the cases. The thermodynamic quantities were also determined for both reactions. The catalytic constant (K_C) was also calculated for catalysed reaction at different temperatures and the corresponding activation parameters were determined.     

Oxidation of lysine by ferricyanide in presence of osmium(VIII)

Osmium(VIII) catalysed oxidation of lysine by ferricyanide in excess ferrocyanide shows a complex kinetics. The order in lysine falls, from 1 to 0 while that in ferricyanide increases from 0 to 2 with large increase in lysine concentration. The rates were directly proportional to [Os(VIII)] and {Const.+[Fe(CN) ₆ ⁴ ]}. A suitable mechanism is proposed and discussed.

---

Oxidation von lysin mittels ferricyanid in der gegenwart von osmium(VIII)

Zusammenfassung Die von Os(VIII) katalysierte Oxidation von Lysin mit Ferricyanid in überschüssigem Ferrocyanid zeigt eine komplexe Kinetik. Bei starker Steigerung der Lysinkonzentration fällt die Ordnung bezüglich Lysin von 1 auf 0, während bezüglich Ferricyanid eine Erhöhung, von 0 auf 2 festzustellen ist. Die Geschwindigkeitskonstanten waren direkt proportional zu [Os(VII)] und {Const.+[Fe(CN) ₆ ⁴ ]}. Es wird ein möglicher Mechanismus vorgeschlagen und diskutiert.

     

Oxidative degradation of non-ionic surfactant (TritonX-100) by chromium(VI)

Degradation of polyoxyethylene chain of non-ionic surfactant (TritonX-100) by chromium(VI) has been studied spectrophotometrically under different experimental conditions. The reaction rate bears a first-order dependence on the [Cr(VI)] under pseudo-first-order conditions, [TritonX-100]  [Cr(VI)] in presence of 1.16 mol dm⁻³ perchloric acid. The observed rate constant (k_obs) was 3.3 × 10⁻⁴ to 3.5 × 10⁻⁴ s⁻¹ and the half-life (t_1/2) was 33–35 min for chromium(VI). The effects of total [TritonX-100] and [H⁺] on the reaction rate were determined. Reducing nature of non-ionic TritonX-100 surfactant is found to be due to the presence of –OH group in the polyoxyethylene chain. It was observed that monomeric and non-ionic micelles of TritonX-100 were oxidized by chromium(VI). When [TritonX-100] was less than its critical micelle concentration (cmc) the k_obs values increased from 0.76 × 10⁻⁴ to 1.5 × 10⁻⁴ s⁻¹. As the [TritonX-100] was greater than the cmc, the k_obs values increases from 2.1 × 10⁻⁴ to 8.2 × 10⁻⁴ s⁻¹ in presence of constant [HClO₄] (1.16 mol dm⁻³) at 40 °C. A comparison was made of the oxidative degradation rates of TritonX-100 with different metal ion oxidants. The order of the effectiveness of different oxidants was as follows: permanganate > diperiodatoargentate(III) > chromium(VI) > cerium(IV).     

Mechanistic aspects of uncatalyzed and ruthenium(III) catalyzed oxidation of dl-ornithine by copper(III) periodate complex in aqueous alkaline medium: A comparative kinetic study

The oxidation of dl-ornithine monohydrochloride (OMH) by diperiodatocuprate(III) (DPC) has been investigated both in the absence and presence of ruthenium(III) catalyst in aqueous alkaline medium at a constant ionic strength of 0.20 mol dm⁻³ spectrophotometrically. The stiochiometry was same in both the cases, i.e., [OMH]/[DPC] = 1:4. In both the catalyzed and uncatalyzed reactions, the order of the reaction with respect to [DPC] was unity while the order with respect to [OMH] was < 1 over the concentration range studied. The rate increased with an increase in [OH⁻] and decreased with an increase in [IO₄⁻] in both cases. The order with respect to [Ru(III)] was unity. The reaction rates revealed that Ru(III) catalyzed reaction was about eight-fold faster than the uncatalyzed reaction. The oxidation products were identified by spectral analysis. Suitable mechanisms were proposed. The reaction constants involved in the different steps of the reaction mechanisms were calculated for both cases. The catalytic constant (K_C) was also calculated for catalyzed reaction at different temperatures. The activation parameters with respect to slow step of the mechanism and also the thermodynamic quantities were determined. Kinetic experiments suggest that [Cu(H₂IO₆)(H₂O)₂] is the reactive copper(III) species and [Ru(H₂O)₅OH]²⁺ is the reactive Ru(III) species.     

Ruthenium-azoimine-chloranilates Synthesis,Spectra and Electrochemistry of Ruthenium(II)-1-alkyl-2-(arylazo)imidazole-chloranilate Complexes

Ag⁺-assisted dechlorination of blue cis-trans-cis Ru(R-aai-R′)₂Cl₂ followed by the reaction with chloranilic acid (H₂CA) in the presence of Et₃N, gives a neutral mononuclear violet complex [Ru(R-aai-R′)₂(CA)]. [R-aai-R′=p-R-C₆H₄—N=N—C₃H₂—NN, abbreviated as an N,N′ chelator where N(imidazole) and N(azo) represent N and N′, respectively; R = H (a), OMe (b), NO₂ (c) and R′= Me (4), Et(5), Bz(6)]. All the complexes exhibit strong intense MLCT transitions in the visible region and weak broad bands at higher wavelength (>700 nm). Visible transitions (580–595 nm) show a negative solvatochromic effect. The cyclic voltammograms show two quasireversible to irreversible couples positive to SCE and are due to CA⁻/CA²⁻ (1.2–1.35 V) and Ru(III)/Ru(II) (1.6–1.8 V) redox processes. Three couples, negative to SCE, are assigned to CA²⁻/CA³⁻ (−0.2 to −0.3 V), and azo reductions (−0.5 to −0.7, −0.8 to −0.9 V) of the chelated R-aai-R′.     

Osmium(VIII)-Catalyzed Oxidation of Some Cyclic Amines by Potassium Hexacyanoferrate(III) in Alkaline Media: a Kinetics and Mechanistic Study

Reactions of morpholine, piperidine, and piperazine with Os(VIII)-catalyzed hexacyanoferrate(III) in alkaline media to produce the corresponding lactam have been studied at constant temperature and ionic strength. The reactions followed first-order kinetics with respect to [amine] and [Os(VIII)] but were independent of [Fe(CN)₆ ^3-] and [OH^-]. The effects of introduced electrolytes, potassium hexacyanoferrate(II), relative permitivity, and temperature have also been studied. A mechanism accounting for these results has been proposed.     

Vibrational interactions in dimethylgold(III) halides and carboxylates

The far-infrared and Raman spectra of binuclear molecules [Me₂AuX]₂ (X = Cl, Br, I) and [Me₂Au(OOCR)]₂ (R = Me, CF₃, Bu^t, Ph) in the 600–70 cm⁻¹ region are reported. The experimentally measured vibrational frequencies of [Me₂AuX]₂ are in a good agreement with density functional theory predictions. The Au…Au vibrational interactions predicted to be in the 270–60 cm⁻¹ region of [Me₂AuX]₂ far-IR and Raman spectra have been observed. The Raman-active Au…Au vibrations of the [Me₂Au(OOCR)]₂ molecules were found to be in the same region as those of [Me₂AuX]₂. The Au–X stretching modes were observed between 100 and 250 cm⁻¹ in accordance with the DFT predictions. Their frequencies in the IR spectra of [Me₂AuX]₂ increase in the sequence I < Br < Cl while the AuC₂ stretching frequencies decrease in the same order. This fact might be an evidence of the decreasing covalent character of the gold-halogen bridges. The Au–O stretching bands of dimethylgold(III) carboxylates have been observed in the 500–250 cm⁻¹ region, and Au–C stretching frequencies of both [Me₂AuX]₂ and [Me₂Au(OOCR)]₂ compounds have been found between 600 and 500 cm⁻¹.     

Mechanistic aspects of the reduction of ruthenium(III) catalyzed

The kinetics of Ru_III catalyzed reduction of hexacyanoferrate(III) [Fe(CN)₆]^3–, by atenolol in alkaline medium at constant ionic strength (0.80 mol dm^–3) has been studied spectrophotometrically, using a rapid kinetic accessory. The reaction between atenolol and [Fe(CN)₆]^3– in alkaline medium exhibits 1:2 stoichiometry [atenolol:Fe(CN)₆ ^3–]. The reaction showed first order kinetics in [Fe(CN)₆]^3– concentration and apparent less than unit order dependence, each in atenolol and alkali concentrations. Effect of added products, ionic strength and dielectric constant of the reaction medium have been investigated. A retarding effect was observed by one of the products i.e., hexacyanoferrate(II). The main products were identified by i.r., n.m.r., fluorimetric and mass spectral studies. A mechanism involving the formation of a complex between the atenolol and the hydroxylated species of ruthenium(III) has been proposed. The active species of oxidant and catalyst were [Fe(CN)₆]^3–and [Ru (H₂O)₅OH]²⁺, respectively. The reaction constants involved in the mechanism were evaluated. The activation parameters were computed with respect to the slow step of the mechanism, and discussed.     

Sub- and post-micellar catalytic and inhibitory effects of cetlytrimethylammonium bromide in the permanganate oxidation of phenylalanine

The kinetics of phenylalanine (phe) oxidation by permanganate has been investigated in absence and presence of cetlytrimethylammonium bromide (CTAB) using conventional spectrophotometric technique. The rate shows first- and fractional-order dependence on [MnO₄⁻] and [phe] in presence of CTAB. At lower values of [CTAB] (≤10.0 × 10⁻⁴ mol dm⁻³), the catalytic ability of CTAB aggregates are strong. In contrast, at higher values of [CTAB] (≥10.0 × 10⁻⁴ mol dm⁻³), the inhibitory effect was observed in absence of H₂SO₄. We find that anions (Br⁻, Cl⁻ and NO₃⁻) in the form of sodium salts are strong inhibitors for the CTAB catalyzed oxidation. Kinetic and spectrophotometric evidences for the formation of an intermediate complex and an ion-pair complex between phe and MnO₄⁻, CTAB and MnO₄⁻, respectively, are presented. A mechanism consistent with kinetic results has been discussed. Complex formation constant (K_c) and micellar binding constant (K_s) were calculated at 30 °C and found to be K_c = 319 mol⁻¹ dm⁻³ and K_s = 1127 mol⁻¹ dm⁻³, respectively.     

Hydrolysis of hydro(pyrrolyl-1)borates

The hydrolysis of hydro(pyrrolyl-l)borates ([BH_n(NC₄H₄)_4-n]⁻, n = 1,2,3) can be treated as a kinetically one-step reaction outside of the mildly acidic region. In strongly acidic medium the hydrolysis takes place in a stepwise manner; the intermediates (boranes and the cationic boron compounds) being hydrolyzed more slowly than the borate anion. In the first step of the hydrolysis of [BH₃(NC₄H₄)]⁻ the B---H bond, while in case of [BH₂(NC₄H₄)₂]⁻ and [BH(NC₄H₄)₃]⁻ the B---N bond is breaking.In neutral and mildly alkaline medium, the hydrolysis is a general acid catalyzed reaction (A---S_E2 mechanism). It becomes to a special H⁺-ion catalyzed reaction (A-1 mechanism) in strongly alkaline region since the protonated intermediate can be reversed to the original borate upon reaction with the OH⁻ ion. The hydrolysis presumably takes place through an intermediate which is protonated on the pyrrolyl nitrogen. Concomitant to the hydrolysis an isotopic exchange reaction was observed on the C_α and C_β atoms of the pyrrolyl group in heavy water. In the hydrolysis of the [BH₃(NC₄H₄)]⁻-anion the N-protonated intermediate is assumed to be able to reverse to the original borate even in acidic or neutral region, at least in part.