高灵敏GaAs探测器及应用

在ICF实验研究中,我们应用新研制的经快中子辐照处理过的GaAs晶体材料做成的光导电探测器首次实验观察到各种结构的内爆靶发射的硬X光时间波形信号以及硬X光的空间角分布。这种探测器对X光有很高的灵敏度(约10~(-18)C/keV),有快的响应(约100ps),具有抗干扰能力强,灵敏度高体积小,用于ICF实验的X光诊断有独特优点。     

非圆截面环流器硬X射线辐射强度的绝对测量

本文给出了逃逸电子在孔拦上轰击出的硬X射线能谱及其辐射强度,描述了硬X射线闪烁谱还原成能谱的分析处理法,并对NaI(T1)探测器的绝对光峰效率进行了测量。     

用henke X光源标定Kodak SWR底片的响应曲线

利用Henke X光源,通过电子激发方式,获得了C的K_a线(277eV)和Mo的L线(193eV),通过X光激发方式,获得了Al的K_a线(1.5keV)和Ti的K_a线(4.5keV)。利用流气式正比计数管监测X射线强度,测得了Kodak SWR底片对以上四种能量的X光的响应曲线。     

5~88keV能区硬X光能谱精密测量

利用滤波荧光(FF)法建立了5~88keV能区硬X光能谱测量系统,对闪烁探测器的灵敏度进行了精密标定,不确定度好于10%。通过研究干扰产生的原因,改善系统屏蔽,有效地排除了干扰,提高了系统的信噪比;通过更换大电流的光电倍增管,改变准直光阑的尺寸和滤片的厚度,将测量系统的线性动态范围从4提高到104。在神光Ⅲ原型物理实验中定量给出Au平面靶硬X光谱,实现硬X光能谱的精密测量。     

硬X光光电成像系统面密度分辨能力

 针对基于将X光转换成可见光接收的硬X光光电成像系统,研究了系统面密度分辨能力的理论模型,获得了系统面密度分辨能力的上下限的表达式;建立了对硬X光成像系统对面密度分辨能力的测量方法。利用自制面密度分辨率板,实验测量了由射频X光机、转换屏、光纤锥耦合和CCD相机组成的硬X光光电成像系统在不同照射量下的面密度极限分辨能力的上下限值。实验结果与理论分析模型分析趋势一致,在未饱和条件下面密度分辨力上限随着照射量的增加而不断增加,而面密度分辨力下限随着照射量的增加将减小。     

“神光Ⅱ”基频光黑腔靶实验超热电子诊断

介绍“神光Ⅱ”首次进行大能量基频光黑腔靶实验超热电子实验观测,采用十道滤波荧光谱仪(FFS)测量腔靶发射15—250keV硬x射线谱,由高能x射线谱通量推断超热电子占入射激光能量份额ηhe为13%—16%,由谱的斜率推断超热电子温度Th为35—45keV,由超热电子能量和受激拉曼散射光(SRS)能量的关联,推断超热电子产生的机理,并给出了不同腔靶在不同激光能量EL下超热电子产生的特征 关键词： 1.053μm激光 超热电子 黑腔靶 大能量激光     

北京同步辐射装置软X光束线通量谱的绝对测量与计算

在北京同步辐射装置(BSRF)上用全吸收平行板充氙电离室作一级标准探测器,对硅光电二极管(AXUV—100)的效率在光子能量5—6.5keV进行了标定,建立了二级标准探测器;AXUV—100硅光电二极管在50eV-6keV有很好的线性响应,将其在硬X射线波段已标定的效率曲线外推到软X射线波段,并对BSRF3B1A和4B9B光束线在软X射线波段光子通量谱进行了初步地测量,测量结果与理论计算结果较为符合.在3B1A软X光学实验站,利用二级标准探测器对用于惯性约束聚变(ICF)的软X光探测器的灵敏度进行了标定,并取得了满意的结果.     

腔靶X光空间特性研究

本文介绍了腔靶X光空间成像原理和方法。在国内,首次将MCP(微通道板)光电成像器件应用于激光聚变实验,将X射线测量能区扩展到亚千电子伏范围。实验中利用各种黑体腔靶,通过测量腔靶X光空间发射图象,得到了腔靶激光注入孔和腔内都存在着等离子体会聚机制,以及腔内X光发射以腔壁为主等重要信息,观察到腔靶X光输运通道存在着“堵口”现象,对测量结果进行了物理解释。     

黑腔靶中超热电子特性研究

近几年来,在“神光”装置上进行了1.053μm激光与平面靶及一系列柱形黑腔靶相互作用实验。用一台多道滤波—荧光X光能谱仪(FFS)测得各种靶发射的超热X射线谱,由谱推导超热电子温度T_h和超热电子总能量E_h当照射靶单束激光能量E_(tar)为400～670J、脉宽τ=650～1150ps时,发现黑腔内明显存在两群服从Maxwell分布高能电子(T_h=35～45keV;T_(hh)=150～350kev),而且E_(he)占E_(tar)的份额为10％～12％。实验还表明:腔内的E_(he)与非线性过程特征量(SRS)有较好的线性关系,因此推断出腔内超热电子产生的主要机制是受激Raman散射。在相同照射条件下,黑腔靶产生的超热电子比平面靶严重。     

用硬X射线自由电子激光解析复杂生物大分子的结构

2010年,美国斯坦福直线加速器中心(SLAC)的研究人员在Nature Photonics杂志上发文[1],宣布世界上第一个硬X射线波段的自由电子激光装置正式投入使用.X射线激光给整个"X光科技"带来的影响,将不亚于上世纪可见光激光给光学带来的影响.上世纪初诞生的X光科技使大量科学实验深入到原子层次,为物理、化学、材料科学以及生命科学等领域的许多重大突破提供了实验基础.以X射线激光为基础的21世纪的X光科技,将在更广的范围、更深的层次、以更高的效率对相关学科的发展起更大     

Analytic calculation of scaling dimensions: Tricritical hard squares and critical hard hexagons

The finite-size corrections, central chargesc, and scaling dimensionsx of tricritical hard squares and critical hard hexagons are calculated analytically. This is achieved by solving the special functional equation or inversion identity satisfied by the commuting row transfer matrices of these lattice models at criticality. The results are expressed in terms of Rogers dilogarithms. For tricritical hard squares we obtainc=7/10,x=3/40, 1/5, 7/8, 6/5 and for hard hexagons we obtainc=4/5,x=2/15, 4/5, 17/15, 4/3, 9/5, in accord with the predictions of conformal and modular invariance.     

Plasma focus based flash hard X-ray source in the 100 keV region with reproducible spectrum

A pulsed hard X-ray source with shot to shot reproducible spectrum, based on a 4.7 kJ small-chamber Mather-type plasma focus device, is presented. The hard X-ray output spectrum was measured in a single shot basis by differential absorption on metallic plates. The measured spectra have a single dominant peak around 75 keV and a spectral bandwidth covering the 40-150 keV range. A hard X-ray dose of (53±3) μGy per shot was measured on axis at 53 cm from the source, and found to be uniform within a half aperture angle of 6°.     

钢中脆硬粒子裂纹形成机理

钢中的脆硬粒子对钢的解理脆断有直接的影响，解理断裂源大都发生在脆硬粒子上.根据微裂纹形成的热力学模型，利用钢中脆硬粒子开裂时所释放的弹性应变能、位错塞积弹性能，所产生的表面能，对脆硬粒子裂纹形成机理进行分析.模型计算表明，正应力和位错塞积力都是脆硬粒子开裂的必要条件，这与实验事实相符；同时给出脆硬粒子开裂的临界条件计算方法，计算发现，脆硬粒子临界开裂应力不仅取决于脆硬粒子尺寸及表面能，而且与晶粒直径有一定的相关关系，当晶粒直径较小时，这种关系与实验测定的材料解理断裂应力与晶粒尺寸的关系一致，说明整体失稳解 关键词： 解理断裂 裂纹形核 脆硬粒子     

Enhanced KR-Fundamental Measure Functional for Inhomogeneous Binary and Ternary Hard Sphere Mixtures

An enhanced KR-fundamental measure functional (FMF) is elaborated andemployed to investigate binary and ternary hard sphere fluids near a planarhard wall or confined within two planar hard walls separated by certaininterval. The present enhanced KR-FMF incorporates respectively, for aim ofcomparison, a recent 3rd-order expansion equation of state (EOS) and aBoublik's extension of Kolafa's EOS for HS mixtures. It is indicated that the two versions of the EOS lead to, in the framework of the enhanced KR-FMF, similar density profiles, but the 3rd-order EOS is more consistent with an exact scaled particle theory (SPT) relation than the BK EOS. Extensive comparison between the enhanced KR-FMF-3rd-order EOS predictionsand corresponding density profiles produced in different periods indicatesthe excellent performance of the present enhanced KR-FMF-3rd-order EOS incomparison with other available density functional approximations (DFAs).There are two anomalous situations from whose density profiles all DFAsstudied deviate significantly; however, subsequent new computer simulationresults for state conditions similar to the two anomalous situations are invery excellent agreement with the present enhanced KR-FMF-3rd-order EOS. The present paper indicates that (i) the validity of the ``naive' substitutionelaborated in the present paper and peculiar to the original KR-FMF is stillin operation even if inhomogeneous mixtures are being dealt with; (ii) thehigh accuracy and self-consistency of the third order EOS seem to allow forapplication of the KR-FMF-third order EOS to more severe state conditions;and (iii) the ``naive' substitution enables very easy the combination of theoriginal KR-FMF with future's more accurate but potentially more complicatedEOS of hard sphere mixtures.     

人体硬组织替代材料的研究进展

硬组织（骨、牙等）损伤或病变是临床上常见的事件，如果损伤或病变严重到无法进行药物治疗的程度，需要采取硬组织替代材料进行修复或置换。文章对人体硬组织替代材料的类型、力学性能及生物学性能等方面进行了综述，并指出了硬组织替代材料的发展方向。     

Perturbation expansions and series acceleration procedures: Part-II. Extrapolation techniques

Three new procedures for the extrapolation of series coefficients from a given power series expansion are proposed. They are based on (i) a novel resummation identity, (ii) parametrised Euler transformation (pet) and (iii) a modifiedpet. Several examples taken from the Ising model series expansions, ferrimagnetic systems, etc., are illustrated. Apart from these applications, the higher order virial coefficients for hard spheres and hard discs have also been evaluated using the new techniques and these are compared with the estimates obtained by other methods. A satisfactory agreement is revealed between the two.     

硬质合金Wc—TiC—Co的研制和机理初探

本文介绍了在45钢表面利用大功率CO_2激光束制取硬质合金WC-TiC-Co的方法,并对合金层的显微组织和性能进行了观察和测试,对形成硬质合金的机理作了初步讨论,结果表明;采用这种方法对提高金属材料表面性能是成功的。     

Orientational structure of dipolar hard spheres near a hard neutral wall

Spherical boundaries are used in a Monte Carlo simulation to calculate the angular structure of dipolar hard spheres near a neutral hard wall.     

Associated J/ψ+γ Production Through Double Pomeron Exchange: the Nature of the Pomeron and Hard Diffractive Factorization Breaking

We present a study of associated J/ψ+γ production through double pomeron exchange at energies reached at the Fermilab Tevatron.and CERN LHC based on the Ingelman-Schlein model for hard difiactive scattering and the factorization formalism of nonrelativistic QCD for quarkonia production. We find that the process p+p→p +p + J/ψ+γ + X can be used to probe the gluon content of the pomeron and study the nature of hard difiactive factorization breaking.