苯基聚倍半硅氧烷改性大豆油基聚氨酯的合成及其性能研究

以环氧大豆油为起始原料经开环反应合成出大豆油多元醇,并与聚乙二醇(PEG-600)互混作为多元醇原料制备出植物油基聚氨酯.在预聚体合成过程中,加入不同含量的七苯基三环庚硅氧烷三硅醇,通过醇羟基与异氰酸酯基的反应,将聚倍半硅氧烷(POSS)引入到植物油聚氨酯基体中,制备出聚氨酯(PU/POSS)纳米复合材料,并探讨纳米粒子—聚倍半硅氧烷对聚氨酯材料热稳定性,表面疏水性及力学性能的影响.热重分析(TGA)结果表明,在O2条件下,复合材料的初始降解温度Td5和最终稳定温度Tf都会提高,特别是当POSS含量达到9.27 wt%后,聚氨酯在450~500℃之间较强的失重现象消失;DSC结果表明玻璃化温度Tg随粒子含量的增加呈现先增大后减小的趋势;静态接触角测试结果表明随POSS含量的增加,材料表面的疏水、疏油性随之增大.拉伸测试结果表明POSS的引入能在一定程度上提高材料的拉伸强度.     

环氧大豆油多元醇改性磺酸型水性聚氨酯合成与性能研究

用2-乙基己醇(异辛醇)对环氧大豆油进行开环,生成环氧大豆油多元醇,并利用其对由异佛尔酮二异氰酸酯(IPDI)、聚己内酯二元醇(PCL)和乙二胺基乙磺酸钠(AAS)为主要合成原料的磺酸型水性聚氨酯(SWPU)进行改性,考察了不同多元醇含量对磺酸型水性聚氨酯乳液以及胶膜性能的影响.首先,通过FTIR和1H-NMR证实了环氧大豆油多元醇的合成;然后经过粒径测试、耐水性测试、接触角测试、机械性能测试、TG测试等检测表明:磺酸型水性聚氨酯成功合成,随着多元醇含量的增加,水性聚氨酯乳液粒径逐渐增大;胶膜的吸水率逐渐减小,并趋于平缓;力学性能拉伸强度逐渐增强,而断裂伸长率下降.但当环氧大豆油多元醇添加量过大时,导致最后乳液无法分散,乳化失败.当多元醇含量与PCL质量比为0.2时,胶膜吸水率由50.14%减小至12.27%,接触角为103.3°,拉伸强度由8.16 MPa增至21.77 MPa.通过TG表明,分子结构中多元醇的引入,胶膜的耐热性有明显提高.     

聚硅氧烷与纳米SiO_2复合改性光固化水性聚氨酯的制备与性能

以聚碳酸酯二元醇(PCD)和羟基封端的聚二甲基硅氧烷(PDMS)为软段、异佛尔酮二异氰酸酯(IPDI)为硬段,在乳化过程中引入纳米SiO_2,制得光固化水性聚氨酯纳米复合乳液。采用纳米粒度仪、SEM、光学接触角测量仪、电子拉力机等对复合乳液和复合膜的结构与性能进行了表征。研究结果表明:纳米SiO_2相互接触,形成了连续的纳米SiO_2网状结构贯穿于整个聚合物基体中;PDMS与纳米SiO_2的复合引入使复合膜杨氏模量、拉伸强度、断裂伸长率、表面疏水性及耐水性均得到显著提高。     

氨基硅油扩链改性水性聚氨酯的合成及性能研究

采用甲苯二异氰酸酯(TDI)、聚氧化丙烯二醇(PPG)、2,2-二羟甲基丙酸(DMPA)为原料,先制备成聚氨酯预聚体,再通过在乳化过程中以侧链氨基硅油(AEAPS)或直链氨基硅油(ATPS)扩链制得了一系列水性聚氨酯乳液,并对涂膜的红外光谱、耐水性、力学性能和表面疏水性等进行了研究。结果表明,通过氨基硅油改性的聚氨酯涂膜,在保持力学性能基本不变的情况下,其耐水性、表面疏水性等性能都有明显提高。其中,侧链氨基硅油(AEAPS)比直链氨基硅油(ATPS)具有更好的改性效果。     

复合SiO2粒子涂膜表面结构及超疏水性能

采用溶胶-凝胶法制备不同粒径SiO₂粒子，通过表面改性得到不同形状复合粒子，并利用氟硅氧烷的表面自组装功能制备了具有“荷叶效应”的超疏水涂膜。通过原子力显微镜、扫描电镜和水接触角的测试对膜结构及性能进行了表征，探讨了SiO₂粒子的粒径和形状与表面微观结构、表面粗糙度和表面疏水性能的关系。结果表明含单一粒径粒子涂膜表面水接触角符合Wenzel模型，而复合粒子构成了符合Cassie模型的非均相界面;单纯的粗糙度因子不能反映水接触角的变化，复合粒子在膜表面的无规则排列赋予涂膜表面不同等级的粗糙度，使得水滴与涂膜表面接触时能够形成高的空气捕捉率和较小的粗糙度因子;其与在涂膜表面能形成自组装分子膜的氟硅氧烷共同作用赋予了涂膜超疏水性能，而这种超疏水性能与复合粒子的粒径大小和形状基本无关。     

中和度对聚酯型阴离子水性聚氨酯性能的影响

采用预聚体法,以聚酯多元醇、甲苯二异氰酸酯、二羟甲基丙酸（DMPA）制备了聚酯型阴离子水性聚氨酯乳液,考察了中和度对乳液的粒径、运动黏度以及胶膜力学性能的影响。结果表明,随着中和度的增加,水性聚氨酯乳液的粒径减小;运动黏度增大;水性聚氨酯胶膜的耐水性先增大后减小;胶膜的拉伸强度提高,但其断裂伸长率降低。以三乙胺为中和剂...     

高醚化三聚氰胺甲醛树脂交联水性聚氨酯的制备与表征

合成了高醚化三聚氰胺甲醛树脂(HMMM)交联改性含聚乙二醇单甲醚(Ymer N120)亲水基团的阴离子型水性聚氨酯。 通过全反射红外(ATR-FTIR)、差示扫描量热仪(DSC)、电子拉力机等技术手段表征了改性后的水性聚氨酯胶膜结构、热性能和力学性能。 结果表明,随着HMMM质量分数的增加,聚氨酯胶膜中氢键相互作用减弱,胶膜耐热性、耐水性、拉伸强度、粘接性均有所提高;当HMMM为8%时,聚氨酯胶膜的拉伸强度增加了125%,T-型剥离强度增加了7.4 N/cm,硬段最大热分解速率对应温度增加了38 ℃。 此外,交联水性聚氨酯胶膜的耐水性也得到了很大程度的提高。     

氨基硅油改性聚醚型聚氨酯

以甲苯二异氰酸酯、聚氧化丙烯二醇、氨乙基氨丙基聚二甲基硅氧烷为原料在无溶剂条件下合成了有机硅改性聚氨酯预聚体 ,用红外光谱对其进行了表征。以 3,3′ 二氯 4 ,4′ 二氨基 二苯基甲烷复合固化剂固化得氨基硅油改性聚氨酯材料 ,对材料的力学性能、耐热性、表面水接触角测试等表明 ,改性聚氨酯在ω(氨基硅油 ) =3%～ 15 %时 ,有较明显的改性效果 ,且在ω(氨基硅油 ) =10 %时 ,具有最佳综合性能 ,其拉伸强度和伸长率较未改性的分别提高 31%和 5 2 % ,表面水接触角提高了 2 3° ,耐热性也有所提高     

甲基丙烯酸羟乙酯改性水性聚氨酯乳液的制备及性能

采用种子溶胀乳液聚合法,以水性聚氨酯为种子,甲基丙烯酸羟乙酯、甲基丙烯酸甲酯和丙烯酸丁酯为单体制备水性聚氨酯丙烯酸酯复合乳液,考察了甲基丙烯酸羟乙酯含量对复合乳液的T型剥离、胶膜的硬度、耐水性和力学性能的影响。结果表明,随着甲基丙烯酸羟乙酯含量的增加,复合乳液的T型剥离强度、胶膜的硬度和拉伸强度增大,胶膜的耐水性先增大后减小,断裂伸长率有所降低,适宜的甲基丙烯酸羟乙酯用量为3%。     

有机硅改性聚氨酯的合成与性能

在无溶剂条件下利用二步法合成了一系列氨基硅油改性聚氨酯,采用红外光谱对预聚体进行了表征,同时测试了材料的力学性能、耐热性、表面水接触角及微观形态,结果表明,改性后的聚氨酯具有优良的力学性能、耐热性及表面疏水性,且材料呈微观相分离形态。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.