Comparison of different imidazolium supported ionic liquid polymeric phases with strong anion-exchange character for the extraction of acidic pharmaceuticals from complex environmental samples

Two imidazolium supported ionic liquid phases (SILPs) containing different anions, trifluoromethanesulphonate [CF(3) SO(3) (-) ], and tetrafluoroborate [BF(4) (-) ], were synthesized and evaluated as solid-phase extraction sorbents for extracting acidic pharmaceuticals from aqueous samples under strong anion-exchange conditions, which include an effective cleanup of the sample. The best SILP material [MI(+) ][CF(3) SO(3) (-) ] was selected and successfully applied to the determination of acidic pharmaceuticals in different types of water samples (river water and effluent wastewater). The results were then compared to the previously synthesized SILP material based on [MI(+) ][CF(3) COO(-) ] and the commercially available Oasis MAX sorbent.     

强酸性阳离子交换树脂催化合成醋酸正丁酯的动力学研究

以强酸性阳离子交换树脂Amberlyst 15作为催化剂,研究了醋酸与正丁醇合成醋酸正丁酯的反应动力学;考察了搅拌速度、催化剂粒径、温度、催化剂用量,以及酸醇物质的量之比对醋酸转化率的影响;建立了拟均相动力学模型,对实验数据进行了拟合,并估算了相应的动力学参数.结果表明,由拟均相动力学模型得到的计算值与实验值吻合较好.     

Anion-exchange HPLC separation of five major rabbit lipoproteins using a nonporous diethylaminoethyl-ligated gel with a perchlorate-containing eluent

Rabbits are often used as experimental animals in studies of atherosclerosis and hyperlipidemia. Although rabbit lipoproteins can be quantitated by sequential ultracentrifugation, a simpler and more reproducible method is desirable for detailed analyses. The current study describes a method to analyze rabbit lipoproteins in plasma by anion‐exchange high‐performance liquid chromatography using a column filled with nonporous, diethylaminoethyl‐ligated polymers. A solution of NaClO₄ was used to adjust the ionic strength of the eluent. The method required only 15 μL of plasma and analysis was completed in 23 min. Five lipoprotein fractions (high‐density lipoprotein, low‐density lipoprotein, intermediate‐density lipoprotein, very‐low‐density lipoprotein and chylomicrons) were eluted with step‐wise increases in a concentration of NaClO₄. The post‐column eluate was reacted with an enzymatic reagent to determine total cholesterol, and the lipoprotein‐cholesterol fraction was calculated according to relative peak areas in the chromatogram. The within‐day and between‐day assay coefficients of variation for lipoprotein cholesterol levels ranged between 0.436 and 7.143% and between 2.905 and 10.526%, respectively. Administering a high‐fat diet increased lipoprotein‐cholesterol concentrations by 6‐ to 77‐fold. The method described here was nevertheless able to quantitate levels of lipoprotein‐cholesterol in plasma samples from these rabbits. These results indicate that this method may be applied to lipoprotein studies using hyperlipidemic rabbit models. Copyright © 2011 John Wiley & Sons, Ltd.     

Hypercrosslinked strong anion‐exchange resin for extraction of acidic pharmaceuticals from environmental water

Two novel high‐specific surface area polymeric sorbents (HXLPP‐SAXa and HXLPP‐SAXb) were synthesised and evaluated as solid‐phase extraction sorbents. The novel sorbents under study are based on hypercrosslinked polymer microspheres and designed specifically to offer ion‐exchange properties; the specific polymers of interest in the current work have been chemically modified in such a way as to impart a tuneable level of strong anion‐exchange character onto the sorbents. The novel sorbents were applied as strong anion‐exchange sorbents in solid‐phase extraction studies, with the goal being to selectively extract a group of acidic compounds from complex environmental samples in an efficient manner. Out of two HXLPP‐SAX resins evaluated in this study, it was found that the sorbent with the lower ion‐exchange capacity (HXLPP‐SAXa) gave rise to the best overall performance characteristics and, indeed, was found to compare favourably to the solid‐phase extraction performance of commercial strong anion‐exchange sorbents. When the HXLPP‐SAXa sorbent was applied to the solid‐phase extraction of environmental water samples, the result showed quantitative and selective extraction of low levels of acidic pharmaceuticals from 500 mL of river water and 100 mL of effluent wastewater.     

Self-assembly and anion-exchange properties of a discrete cage and 3D coordination networks based on cage structures

By using tridentate ligand 4-(3-pyridinyl)-1,2,4-triazole (pytrz), cage-like complexes of {[Cu(mu2-pytrz)2](ClO4)(SO4)0.5C2H5OH.0.25 H2O}6 (1), {[Cu3(mu3-pytrz)4(mu2-Cl)2(H2O)2](ClO4)2Cl(2).2 H2O}n (2), and {[Cu3(mu3-pytrz)3(mu3-O)(H2O)3](ClO4)2.5(BF4)(1.5)5.25 H2O}n (3) have been synthesized with different copper(II) salts. Complex 1 represents the second example of a M6L12 metal-organic octahedron with an overall Th symmetry. Complex 2 is constructed from a 3(8) cage-building unit (CBU) and each CBU connects six neighboring cages to give the first 3D metal-organic framework (MOF) based on octahedral M6L12. Complex 3 is built from Cu24(pytrz)12 CBUs with the trinuclear copper clusters serving as second building units (SBUs) and decorating each corner of the M24L12 polyhedron. The Cu24(pytrz)12 building unit is linked by extra ligands to give an extended 3D framework that has the formula Cu24(pytrz)24 and possesses a CaB6 topology. The mixed anions ClO4- and BF4- in 3 are both included in the inner cavity of the cage and can be completely exchanged by ClO4- through the open windows of the cage, as evidenced by the crystal structure of the 3D MOF {[Cu3(mu3-pytrz)3(mu3-O)(H2O)3](ClO4)(4)4.5 H2O}n (4). Complex 4 can also be synthesized when employing 1 as a precursor in an extensive study of the anion-exchange reaction. This represents the first successful conversion of a discrete cage into a 3D coordination network based on a cage structure. Complex 2 remains invariable during anion-exchange reactions because uncoordinated Cl- ions are located in the comparatively small inner cavity.     

Determination of non-steroidal anti-inflammatory drugs in wastewaters by magnetic matrix solid phase dispersion-HPLC

A series of supports functionalized with different alkyl chains and covered with magnetite were synthesized, characterized and applied in the sample pre-concentration of four non-steroidal anti-inflammatory drugs (acetaminophen, naproxen, diclofenac and ibuprofen) contained in wastewater samples. The general methodology involved magnetic solid phase dispersion followed by the analysis by high-performance liquid chromatography with ultraviolet detection. The magnetic supports were initially dispersed in the samples with the aid of Triton X-100, then supports were magnetically isolated and the analytes were eluted with methanol. Finally the extract was injected into the HPLC system. The highest recovery percentage (>90%) was obtained with the support containing octyl chains (C8) at pH 3. The lowest limits of detection achieved ranged within 1-2 μg L⁻¹ with repeatability (expressed as RSD) below 5% in all cases. The method was applied in the analysis of wastewater samples.     

Dissolvable layered double hydroxide as a sorbent in dispersive micro‐solid phase extraction for the determination of acidic quinolones in honey by HPLC

This study presents a simple and green dispersive micro‐solid phase extraction method for preconcentration of acidic quinolones from honey prior to high performance liquid chromatography determination. A two‐dimensional nanostructured zinc‐aluminum layered double hydroxide was synthesized and used as the sorbent for dispersive micro‐solid phase extraction. Its different characteristics from conventional sorbents is that it is dissolvable in acidic solution (pH < 4). After the extraction, the analyte elution step was omitted and thus the use of organic solvents was avoided. The key parameters influencing the extraction efficiency such as the amount of sorbent, pH of sample solution, vortex time, type and volume of acidic solution were investigated and optimized. The method exhibited low limits of detection (3.0?5.0 ng/g), good linearity (10?2000 ng/g) with coefficients of determinations higher than 0.9991, acceptable precision (RSD<9.1%) and accuracy (RE<5.8%). The proposed method is fast, efficient, eco‐friendly, and suitable for the determination of acidic quinolones in honey samples.     

Kinetics and thermodynamics of rebaudioside A adsorption on a strongly acidic cation exchange resin

To explain the mechanism underlying the adsorption of stevia's polar component rebaudioside A in hydrophilic interaction liquid chromatography mode, the characteristics of rebaudioside A adsorption on various resins in an organic‐solvent‐rich system were studied. Among the tested resins, the strongly acidic cation resin FPC11 showed the best adsorption behavior for rebaudioside A. The factors affecting the adsorption kinetics of the resin for rebaudioside A are discussed. The results showed that the pseudo‐second‐order reaction model and intra‐particle diffusion model best described the adsorption kinetics of rebaudioside A on the resin. The adsorption rate was controlled by physical sorption, mainly via electron sharing or electron transfer between the adsorbent and the adsorbate. The adsorption process with multiple stages involved weak initial adsorption behavior. Thermodynamic studies showed that the adsorption of rebaudioside A on the resin was not an ideal monolayer adsorption, but mutual adsorption effects between the adsorbates. The adsorption was a spontaneous, entropy‐increasing endothermic process. The synergistic effect of hydrogen bonding and ion–dipole was a possible driving force.     

Rapid Separation of Proteins by Capillary HPLC on a Short Polymethacrylate-based Strong Cation-exchange Monolithic Column

A polymethacrylate‐based strong cation‐exchange capillary monolithic column was prepared by in‐situ copolymerization for the fast separation of proteins. Glycidyl methacrylate (GMA) was used as monomer, ethylenedimethacrylate (EDMA) as cross link agent and the mixture of 1‐propanol, 1,4‐butanediol and water as porogen solvent. The monolith was sulfonated using 1 mol/L Na₂SO₃ based on a ring opening of epoxides. The influences of the contents of the porogen solvent and GMA and the various concentration ratios of 1‐propanol to 1,4‐butanediol in the polymerization mixture on the morphology, porosity, globule size, stability and column efficiency were investigated. The morphology and pore size distribution of the monolith were characterized by SEM and mercury intrusion porosimetry, respectively. Using only 1.5 cm length of this monolithic capillary column, four kinds of proteins, trypsin, cytochrome C, lysozyme (egg white) and egg albumin, were successfully separated from each other in 5 min at a high flow rate of 110 mm/s.     

Encapsulation of Halocarbons in a Tetrahedral Anion Cage

Caged supramolecular systems are promising hosts for guest inclusion, separation, and stabilization. Well‐studied examples are mainly metal‐coordination‐based or covalent architectures. An anion‐coordination‐based cage that is capable of encapsulating halocarbon guests is reported for the first time. This A₄L₄‐type (A=anion) tetrahedral cage, [(PO₄)₄ L ₄]^12?, assembled from a C₃‐symmetric tris(bisurea) ligand ( L ) and phosphate ion (PO₄^3?), readily accommodates a series of quasi‐tetrahedral halocarbons, such as the Freon components CFCl₃, CF₂Cl₂, CHFCl₂, and C(CH₃)F₃, and chlorocarbons CH₂Cl₂, CHCl₃, CCl₄, C(CH₃)Cl₃, C(CH₃)₂Cl₂, and C(CH₃)₃Cl. The guest encapsulation in the solid state is confirmed by crystal structures, while the host–guest interactions in solution were demonstrated by NMR techniques.     

Prediction of elution bandwidth for purine compounds by a retention model in reversed-phase HPLC with linear-gradient elution

In reversed-phase liquid chromatography, the retention mechanism of solute has been studied under linearly programmed gradient mobile-phase conditions. The separation of a mixture of four purine compounds (purine, theobromine, theophylline, and caffeine) was considered as a practical case in two binary mobile phase systems, water/methanol and water/acetonitrile. The retention model which describes how the retention factor is related to the mobile-phase composition has been developed in various mathematical forms to predict the retention time in both linear and gradient elutions. For a pulse injection of sample, two important factors, the retention time and the bandwidth of solute, might be computable to predict the elution profiles estimated by the distribution function, such as the Gaussian distribution function. In this work, a prediction method based on the analogue of the retention model was proposed to calculate the bandwidth in linear gradient elutions. Band broadening was caused by the different migration velocities of the front and rear ends of the solute band in a chromatographic column. Therefore, the migration behaviors of the front and rear ends of the solute band were explained with the same retention model which had been used to predict the retention time of solute. For the well retained solutes, theophylline and caffeine, the predicted bandwidth and experimentally obtained bandwidth showed good agreement in both isocratic and gradient elutions.     

HPLC determination of acidic d‐amino acids and their N‐methyl derivatives in biological tissues

d ‐Aspartate (d ‐Asp) and N‐methyl‐d ‐aspartate (NMDA) occur in the neuroendocrine systems of vertebrates and invertebrates, where they play a role in hormone release and synthesis, neurotransmission, and memory and learning. N‐methyl‐d ‐glutamate (NMDG) has also been detected in marine bivalves. Several methods have been used to detect these amino acids, but they require pretreatment of tissue samples with o‐phthaldialdehyde (OPA) to remove primary amino acids that interfere with the detection of NMDA and NMDG. We report here a one‐step derivatization procedure with the chiral reagent N‐α‐(5‐fluoro‐2,4‐dinitrophenyl)‐(d or l )‐valine amide, FDNP‐Val‐NH₂, a close analog of Marfey's reagent but with better resolution and higher molar absorptivity. The diastereomers formed were separated by HPLC on an ODS‐Hypersil column eluted with TFA/water–TFA/MeCN. UV absorption at 340 nm permitted detection levels as low as 5–10 pmol. d ‐Asp, NMDA and NMDG peaks were not obscured by other primary or secondary amino acids; hence pretreatment of tissues with OPA was not required. This method is highly reliable and fast (less than 40 min HPLC run). Using this method, we detected d ‐Asp, NMDA and NMDG in several biological tissues (octopus brain, optical lobe and bucchal mass; foot and mantle of the mollusk Scapharca broughtonii), confirming the results of other researchers. Copyright © 2009 John Wiley & Sons, Ltd.     

Lipase-mediated enantioselective kinetic resolution of racemic acidic drugs in non-standard organic solvents: Direct chiral liquid chromatography monitoring and accurate determination of the enantiomeric excesses

The enantioselective resolution of a set of racemic acidic compounds such as non-steroidal anti-inflammatory drugs (NSAIDs) of the group arylpropionic acid derivatives is demonstrated. Thus, a set of lipases were screened and manipulated in either the esterification or hydrolysis mode for the enantioselective kinetic resolution of these racemates in non-standard organic solvents. The accurate determination of the enantiomeric excesses of both substrate and product during such reaction is demonstrated. This was based on the development of a direct and reliable enantioselective high performance liquid chromatography (HPLC) procedure for the simultaneous baseline separation of both substrate and product in one run without derivatization. This was achieved using the immobilized chiral stationary phase namely Chiralpak IB, a 3,5-dimethylphenylcarbamate derivative of cellulose (the immobilized version of Chiralcel OD) which proved to be versatile for the monitoring of the lipase-catalyzed kinetic resolution of racemates in non-standard organic solvents.     

Fractionation of phosphopeptides on strong anion‐exchange capillary trap column for large‐scale phosphoproteome analysis of microgram samples

It is one of the key issues to develop powerful fractionating method to increase the identification of the low‐abundance phosphopeptides. In this study, a semi‐online 2‐D LC separation strategy based on three‐step fractionation of the enriched peptides on strong anion‐exchange trap column was developed. It was demonstrated that the sensitivity and phosphoproteome coverage obtained by this fractionating method with strong anion‐exchange trap column is much higher than those by the conventional methods based on C18 trap column. In addition, when the same amount of sample was loaded, the number of identified phosphopeptides had increased 108%. Combination of this three‐step fractionation method with RPLC‐MS/MS analysis by 300 min RP‐gradient separation was applied to phosphoproteome analysis of human liver proteins, and 853 unique phosphopeptides was positively identified from 500 μg tryptic digest of human liver proteins. After three cycles' consecutive analyses, 1554 unique phosphopeptides and 1566 phosphorylated sites were totally identified from 735 phosphorylated proteins at a false discovery rate of <1% in about 54 h of analysis time.     

New concepts of the mechanism of hydrogen exchange between organic molecules and strong acidic centers

Ab initio calculations of the activation energy of the reaction of hydrogen exchange between the methane molecule and the H₃O⁺ ion in the gaseous phase have been carried out by using Hartree-Fock methods and Moeller-Plesset second order perturbation theory (MP2) methods. The structure of the transition state of this reaction has been found. The interaction of the H₃O⁺ ion with molecules of aliphatic hydrocarbons and amino acids has been studied by the Serniernpirical AMI method.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1852–1854, July, 1996.     

Preparation of highly hydrophilic magnetic nanoparticles with anion‐exchange ability and their application for the extraction of non‐steroidal anti‐inflammatory drugs in environmental samples

Diallyldimethylammonium chloride modified magnetic nanoparticles were synthesized by the “thiol‐ene” click chemistry reaction. Diallyldimethylammonium chloride rendered the material plenty of quaternary ammonium groups, and thus the excellent aqueous dispersibility and anion‐exchange capability. The novel material was then used as the magnetic solid‐phase extraction sorbent to extract eight non‐steroidal anti‐inflammatory drugs from water samples. Combined with high‐performance liquid chromatography and ultraviolet detection, under the optimal conditions, the developed method exhibited wide linearity ranges (1–1000, 2–1000, and 5–1000 ng/mL) with recoveries of 88.0–108.6% and low limits of detection (0.3–1.5 ng/mL). Acceptable precision was obtained with satisfactory intra‐ and inter‐day relative standard deviations of 0.4–4.4% (n = 3) and 1.1–5.5% (n = 3), respectively. Batch‐to‐batch reproducibility was acceptable with relative standard deviations <9.7%. The hydrophilic magnetic nanoparticle featured with quaternary ammonium groups showed high analytical potential for acidic analytes in environmental water samples.     

Artificial nano‐pin as a temporal molecular glue for the targeting of acidic tumor cells

Highly precise control of molecular structure for developing efficient anticancer drug delivery is challenging. Our method reported herein can satisfy the need for building novel hybrid molecule; this molecule serves as a built‐in transformer that changes its molecular configuration from a pin‐shaped arrangement to a dog bone‐shaped arrangement. This approach led to a significant increase in the efficiency of tumor inhibition. Copyright © 2014 John Wiley & Sons, Ltd.     

Retention behaviour of beta-blockers in HPLC using a monolithic column

The chromatographic behaviour of a new HPLC-stationary phase (Chromolith RP-18e) is described for separation of beta-blockers. The effects of the different chromatographic conditions (buffer system, pH value, content of organic modifier, injection volume and flow rate) on the separation behaviour were studied. At higher flow rates the peaks seemed to be more symmetrical than at lower flow rates. The use of buffer or salt in the mobile phase for this separation is found to be very essential and the counter-anion type of this buffer or salt significantly affected the retention behaviour of beta-blockers while the cation type did not play the same important role.     

A rapid and simple assay for lamotrigine in serum/plasma by HPLC,and comparison with an immunoassay

Monitoring serum/plasma concentrations of lamotrigine may be useful under certain circumstances. An HPLC column packed with strong cation‐exchange (SCX)‐modified microparticulate silica together with a 100% methanol eluent containing an ionic modifier permits direct injection of sample extracts. An HPLC‐UV method developed using this principle for the measurement of serum/plasma lamotrigine is simple, sensitive and selective. The analysis time is less than 5 min. Intra‐ and inter‐assay precision and accuracy meet acceptance criteria, and sample stability, and potential interferences from other compounds have been evaluated. There was good agreement with consensus mean results from external quality assessment samples (n = 32). Analysis of patient samples (n = 115) using the HPLC method and the Seradyn QMS® Lamotrigine immunoassay showed that the immunoassay over‐estimated lamotrigine by 21% on average. Copyright © 2010 John Wiley & Sons, Ltd.