七年级电功及电功率的学习

关于电功及电功率的教材,在与学习苏联电力化的物理原理有关的知识范围中,占有重要的地位。这些概念的理解、关于它们的量度单位的清楚的观念以及进行有关的简单计算的技能应该是综合技术教育的必要组成部分。可惜,在七年级的物理教科书中,这个学习材料的叙述是形式的、干燥的、很简单的,并且从     

超声波及其应用

超声就是普通的弹性介质的机械扳动,这种振动以一定的速度传播并且具有一定的能量。超声波——是介质的互相更替的稠密和稀疏。超声的传播速度与介质的弹性和介质的密度有关。超声波的波长,也和普通的声波一样,决定于两相隣的稠密或稀疏之间的距离。超声频率的下限     

开放教学资源下新的教学方式的探讨与尝试

网络时代信息是开放的、共享的和丰富的.网络时代的学习有其自身的特点.作为教育者,我们应该从教学的各个环节作出相应的改变,使我们的教学更加适应时代的发展,从而达到"授之以渔"的教育境界.基于这样的认识,我们在双语物理课的教学中有步骤地指导学生借助互联网上公开的、丰富的信息和学习资源进行课程的学习和课题研究.结果表明这种尝试极大地提高了学生的自我学习的能力和学习兴趣,起到了事半功倍的作用,弥补了课堂教学的不足.     

一种基于迈斯纳效应的超导电机的驱动力的计算

超导体的迈斯纳效应是超导体的特有的性质之一,超导驱动的电机正是利用超导体的这个性质而设计的一种新型电机,由于驱动原理与传统的电机有很大的不同,这种电机的驱动力的计算一直是这种超导电机设计中要解决的主要问题,针对一种结构的电机,利用理论分析和数值计算的方法计算了一种基于超导体迈斯纳效应的超导电机驱动力的大小,为这种电机的设计提供了主要依据。     

大气的激光监测

在人口稠密的工业区,大气污染已成为严重的问题,研究污染物以及它们和大气组分的反应已成为迫切的需要了.为了预示与日俱增的污染源对环境的影响和采取及时而有效的措施,需要建立大气的数学模型.这些模型的发展、完善和与之相关的连续监测,要求具有广泛的监测功能. 地球上的生命不仅直接或间接地受近地面的大气组分的影响,而且还受到平流层及平流层以上的大气组分的影响.要用合理的成本来恰当地监测这广阔的区域,为此激光监测是唯一可能提供这种功能的技术. 一、大气遥感技术的特点 激光器的发现促进了人们对物质的非线性特性的研究,以及关…     

寂静地震与地震预测的物理问题

寂静地震是指发生了缓慢的位错、但几乎不辐射地震波的“地震” .在目前的地震预测的物理学研究中 ,通常是通过计算历史上曾经发生过的地震所引起的应力变化 ,或者通过研究地震活动的统计性质或“图像动力学” ,来推测一个断层带上发生地震的危险性 .寂静地震的信息的缺失 ,形成了地震预测的物理学研究中的一个很大的“盲区” ,而在相当程度上 ,解决地震预测的物理问题的主要困难和可能的突破的希望 ,也许就在于此 .寂静地震的研究目前还很不深入 .关于寂静地震的性质 ,文章作者提出两个猜想 :(1)寂静地震的频度 ,满足类似于GR定律的幂律分布 ;(2 )最大的寂静地震的地震矩 ,与“可见”的最大地震的地震矩相当 .     

基于低维相变薄膜的显示器件光学性质的研究

采用传输矩阵模型研究了基于低维相变薄膜的显示器件的光学特性与器件结构的关系。显示器件的类型有反射型和透射型,器件结构的关键参数包括Ge_2Sb_2Te_5(GST)层的厚度、ITO层的厚度、GST层的晶态与非晶态的变化。结果表明:对于反射型器件,ITO层的厚度对器件的反射光谱影响较大,可以通过改变ITO层的厚度达到改变器件颜色的效果;GST层的厚度为12 nm时,GST的晶态与非晶态的变化使器件有最好的颜色对比度且消耗较低的电功率。对于透射型器件,通过使用超薄的GST薄膜,器件的透明度可以保持很高,器件的透明度在GST的厚度超过几纳米后迅速下降。     

磁控溅射气体团簇源中团簇形成的DSMC研究

利用直接模拟蒙特卡洛方法(DSMC) ,模拟了磁控溅射气体团簇源中Cu+ (Cu-)的含量比例不同的条件下,Cu团簇的尺寸分布。模拟结果表明：随着含量比例的增加,团簇的尺寸分布变窄了,不带电的团簇的比例增加,不带电的铜团簇分布的最大值减小,相应的带正电荷和带负电荷团簇的比例减小;相同的含量比例下,带正电的团簇的尺寸分布与带负电荷的团簇的尺寸分布基本相同;初始Cu- 比Cu+ 的含量比例大时,输出的主要是带负电荷的团簇,带正电荷和不带电的团簇占很小的比例;Cu-含量比例的增加,负Cu团簇的尺寸分布减小。     

磁控溅射气体团簇源中团簇形成的DSMC研究

利用直接模拟蒙特卡洛方法(DSMC) ,模拟了磁控溅射气体团簇源中Cu+ (Cu-)的含量比例不同的条件下,Cu团簇的尺寸分布。模拟结果表明：随着含量比例的增加,团簇的尺寸分布变窄了,不带电的团簇的比例增加,不带电的铜团簇分布的最大值减小,相应的带正电荷和带负电荷团簇的比例减小;相同的含量比例下,带正电的团簇的尺寸分布与带负电荷的团簇的尺寸分布基本相同;初始Cu- 比Cu+ 的含量比例大时,输出的主要是带负电荷的团簇,带正电荷和不带电的团簇占很小的比例;Cu-含量比例的增加,负Cu团簇的尺寸分布减小。     

惠斯通电桥实验的分析

惠斯通电桥的灵敏度是影响电阻测量精度的一个主要因素。本论文探究了惠斯通电桥的灵敏度与电源的电动势、桥臂的电阻、桥臂的比例之间的关系。理论分析显示了，电路的总电流保持恒定的情况下，桥臂的比例越大，惠斯通电桥的灵敏度越低，电阻测量的精度越低。另外，桥臂的比例保持不变且电路总电流不大的情况下，电路的总电流越大，惠斯通电桥的灵敏度越高，电阻测量的精度越高。实验测量得到的数据肯定了理论分析得到的结论。     

The Klein-Gordon and the Dirac Oscillators in a Noncommutative Space

We study the Dirac and the Klein-Gordon oscillators in a noncommutative space. It is shown that the Klein-Gordon oscillator in a noncommutative space has a similar behaviour to the dynamics of a particle in a commutative space and in a constant magnetic field. The Dirac oscillator in a noncommutative space has a similar equation to the equation of motion for a relativistic fermion in a commutative space and in a magnetic field, however a new exotic term appears, which implies that a charged fermion in a noncommutative space has an electric dipole moment.     

Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

Lognormal Modes of Dielectric Optical Waveguides

It is shown that, at a critical point where the effective refractive index of a mode coincides with the bulk index of a cladding region, optical waveguide modes exhibiting a lognormal feature are supportable for a hyperlongrange refractive-index profile. As a typical example of waveguides that support lognormal modes a parabolic-index core surrounded by a depressed-index cladding is presented.     

Reconstruction of the acoustic impedance profile in a plate using an inverse spectral procedure

An inverse spectral procedure was applied to reconstruct the acoustic impedance profile along the thickness direction of a plate using its thickness resonance frequencies, density and thickness. For a successful reconstruction, the material-property profile must be symmetric about the mid-plane of the plate. Several cases of numerical simulations, including plates with a few layers and with a high number of layers are described. The calculated resonance frequencies were used to reconstruct the acoustic impedance profile, a process that was successful for all cases. We assume that a plate with a high number of layers, each with a different but constant acoustic impedance, simulates a plate with a smoothly varying acoustic impedance profile. It can be concluded that such a plate, which generates small, virtually undetectable, internally reflected waves, can also be reconstructed. In the special case of a plate of unknown thickness and unknown but constant density, the method is still useful, because a relative variation of the material property can be reconstructed using only the resonance frequencies. An experiment using a resonance-mode electromagnetic acoustic transducer (resonance-mode EMAT) is also described. EMAT is a non-contact ultrasonic method that can measure thickness resonance frequencies, making it appropriate for this method. Some examples of applications are measurement of the temperature profile inside a rolled metal sheet, measurement of a clad metal plate, and monitoring of a metal casting.     

Influences of decoherence on the generation of a macroscopic superposition state using weak cross-Kerr effect

Considering a system in which a single photon and a coherent field propagate through a Kerr medium, when the weak cross-Kerr interaction between the coherent state and the single photon under decoherence is involved, this paper derives analytically a macroscopic superposition state by the superoperator method and investigates the influences of decoherence on the coherence properties of the obtained state. It finds that the macroscopic superposition state will experience evolution from a pure superposition state to a mixed state in a dissipative environment and the Kerr effect makes the field display a periodic revival from decoherence for a short time.     

AN APPROXIMATION OF THE KINETIC ENERGY OF A SUPERFLUID FILM ON A RIEMANN SURFACE

The flow of a superfluid film adsorbed on a porous medium can be modeled by a meromorphic differential on a Riemann surface of high genus. In this paper, we define the mixed Hodge metric of meromorphic differentials on a Riemann surface and justify using this metric to approximate the kinetic energy of a superfluid film flowing on a porous surface.     

Brownian motion on a manifold

The question of the existence and correct form of equations describing Brownian motion on a manifold cannot be answered by mathematics alone, but requires a study of the underlying physics. As in classical mechanics, manifolds enter through the transformation of variables needed to account for the presence of constraints. The constraints are either due to a physical agency that forces the motion to remain on a manifold, or they represent conserved quantities of the equation of motion themselves. Also the Brownian motion is described either by a Smoluchowski diffusion equation or by a Kramers equation. The four cases lead to the following conclusions, (i) Smoluchowski diffusion with a conserved quantity reduces to a diffusion equation on the manifold; (ii) The same is true for diffusion with a physical constraint in three dimensions, but in more dimensions it may happen thatno autonomous equation on the manifold results; (iii) A Kramers equation with a conserved quantity reduces to an equation on the manifold, but in general not of the form of a Kramers equation; (iv) The Kramers equation with a physical constraint reduces to an autonomous Kramers equation on the manifold only for a special shape of that constraint. Throughout, only a certain type of physical constraints has been envisaged, and global questions are ignored. Finally, the customary heuristic construction of a Fokker-Planck equation for a mechanical system on a manifold is demonstrated for the case of Brownian rotation of a rigid body, and its shortcomings are emphasized.     

具有态守恒赝隙的光子晶体中两能级原子自发辐射的增强与抑制

论证了在赝带隙光子晶体中存在一个全频率域态总数守恒规则，在完全带隙光子晶体中还存在一个局域态总数守恒规则.态总数守恒规则指出，如果一个光子晶体的态密度在某些频率范围存在相对于等效介质态密度的谷，则一定由其他频率范围内相对于等效介质态密度的峰来补偿.使用符合态总数守恒规则的态密度模型，解释了态密度调制导致的自发辐射谱增强、抑制、变窄、红移、蓝移以及谱分裂等光子晶体中的量子光学现象.该理论比较适合研究在具有赝带隙的光子晶体中大量随机分布的发光原子或分子的自发辐射行为. 关键词： 光子晶体 自发辐射 态密度 光子赝带隙     

Dynamics of sandwich domain structure in Co-based amorphous ribbons with helical magnetic anisotropy: Part I

The distribution of axes of easy magnetization close to a homogeneous distribution is revealed in each half-thickness of a ribbon after annealing it in a helical magnetic field. The transition from magnetic reversal of a ribbon by the displacement of two domain walls formed near a middle plane of a ribbon to magnetic reversal of a ribbon by displacement of two domain walls formed near to the main surfaces of a ribbon is found out during each half-period of a magnetic reversal.     

Optical Storage Media with Dye-Doped Minute Spheres on Polymer Films

We have fabricated a new optical storage media using minute spheres arranged on a surface relief grating (SRG). Using minute spheres as recording bits, we can limit recordable regions by sphere size, and can realize high resolution reproduction in the plane direction. Surface relief structures were made on a polymer thin film on which we performed diffusion arrangement and adsorptive fixation of minute spheres. The stability of the arranged spheres was confirmed for heating and washing. Furthermore, we used a dipping method for a more simple arrangement of minute spheres on a large area of the substrate and made a monolayer sample of the spheres. We were able to realize a highly sensitive reconstruction of the medium using a confocal optical system as a record and readout system.