Variational principles of perforated thin plates and finite element method for buckling and post-buckling analysis

On the basis of the general theory of perforated thin plates under large deflections^{[1, 2]}, variational principles with deflectionw and stress functionF as variables are stated in detail. Based on these principles, finite element method is established for analysing the buckling and post-buckling of perforated thin plates. It is found that the property of element is very complicated, owing to the multiple connexity of the region. Project supported by National Natural Science Foundation of China.     

Interaction of thin perforated plates and weak shock waves

The paper presents experimental results on elastic deformation of perforated thin plates made of glass-fiber laminate and subjected to weak shock waves. The characteristics of the dynamic process in the plates are determined __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 11, pp. 126–130, November 2006.     

利用结构基因法研究非线性周期性板结构的等效力学性能

非线性周期性板结构是一类在智能复合材料领域具有巨大应用潜力的结构,因其构成材料的非线性特性,以及结构中经常包含增强纤维、肋板和空洞等复杂微结构导致的材料几何非线性,利用常规的有限元方法进行建模和分析较为困难.本文提出了一种结构基因法,通过提取非线性周期性板结构的最小模型单元作为其结构基因,将异质周期性板结构等效为均质板结构,便捷地求解了非线性周期性板结构的微观力学性能和整体等效力学性能.算例表明,结构基因方法可用来分析复杂非线性复合材料结构问题,计算结果精度足够,为复合材料微观力学研究提供了有价值的参考.     

Homogenization-based method for bending analysis of perforated plate

Owing to the existence of distributed holes, it is difficult to solve the bending problem of perforated plates by the conventional finite element method. A homogenization-based method for this problem is presented in this paper. As an example, the bending analysis of a circular perforated plate with distributed step-wise cylindrical holes is made. The deflection and the fundamental frequency obtained by present method are in good agreement with experimental data, this implies that the method is effective. This project is supported by the National Natural Science Foundation (19602007) and National Outstanding Youth Foundation (19525206).     

Elasto-plastic buckling analysis for perforated steel plates subject to uniform compression

This study investigates the elasto-plastic buckling behaviour of simply supported square and rectangular thin steel plates having elliptic cut-outs by means of finite element method. Plates with simply supported in the out-of-plane direction are applied uniform compression in long-edge direction. A50 steel was used in the analysis and the focus was on the effect of plate aspect ratio, elliptical hole size, elliptical hole angle, elliptical hole location and slenderness ratio on buckling behaviour. It was found in the study that as the plate slenderness ratio increases, the critical buckling stress decreases for all the perforated plates.     

网架结构拟夹层板法的有限元验证

用拟夹层板法和有限元法对网架结构进行分析,对三类屋面网架（正放四角锥网架、两向正交正放网架和正放抽空四角锥网架）进行了均布荷载、局部荷载（半跨均布荷载）作用下的静力分析以及固有振动分析,对三类竖向承重网架墙体进行了稳定性分析。通过与有限元法分析结果的对比,表明了拟夹层板法作为一种简化的计算方法,其精度是比较高的,绝大多数的误差都小于5％,是可以直接用于工程结构设计的一种有效方法。此外,拟夹层板法还可作为一种在宏观上检验有限元建模正确与否的实用方法。     

An experimental and numerical study of heave added mass and damping of horizontally submerged and perforated rectangular plates

Forced harmonic heave motions of horizontally submerged and perforated rectangular plates are studied experimentally and numerically at both a deep and shallow submergence. The steady-state vertical forces are expressed in terms of added mass and damping coefficients. The numerical results are partly obtained by combining potential flow with linear free-surface conditions and a nonlinear viscous pressure loss condition at the mean oscillatory plate position. A domain decomposition technique is applied with a boundary element method in the inner domain and an analytical representation of the velocity potential in the outer domain. A drag term accounts for the vortex shedding at the outer plate edges. The numerically predicted Keulegan–Carpenter number dependent heave added mass and damping coefficients agree reasonably with experimental values, in particular for the deeper submergence.     

THE MATHEMATICAL MODELS AND GENERALIZED VARIATIONAL PRINCIPLES OF NONLINEAR ANALYSIS FOR PERFORATED THIN PLATES

ＴＨＥＭＡＴＨＥＭＡＴＩＣＡＬＭＯＤＥＬＳＡＮＤＧＥＮＥＲＡＬＩＺＥＤＶＡＲＩＡＴＩＯＮＡＬＰＲＩＮＣＩＰＬＥＳＯＦＮＯＮＬＩＮＥＡＲＡＮＡＬＹＳＩＳＦＯＲＰＥＲＦＯＲＡＴＥＤＴＨＩＮＰＬＡＴＥＳＣｈｅｎｇＣｈａｎｇｉｕｎ（程昌钧）；ＹａｎｇＸｉａｏ...     

The determination of an equivalent elastic modulus for bodies with cracks by boundary element method

The equivalent elastic modulus of cracked bodies with orderly distributed cracks was computed with the boundary element method. A practical self-consistent scheme has been proposed in consideration of the mutual interaction effects of the cracks. The influence of friction coefficients and orientation of cracks has been investigated. Some computational examples have been given, and the results show that the proposed method is adequate and the scheme is efficient.This project is supported by the National Natural Science Foundation of China.     

功能梯度材料板件三维分析的半解析梯度有限元法

将半解析有限元与梯度有限元相结合,形成一种半解析梯度有限元来求解功能梯度材料板件问题。该方法兼有有限元法的适应性强、程序统一,半解析有限元法的节省单元与计算工作量,梯度有限元法的适应构件内部材料性能任意梯度分布等特点,并实现用一维数值计算给出构件三维分析结果。算例分析表明了方法的精度、功能与上述特点,充分揭示了功能梯度材料板件力学响应的三维形态。半解析梯度有限元法可推广应用到其他功能梯度材料面结构的各类分析中。     

Modal analysis of lightweight graphite reinforced silica/polymer matrix composite plates

In this paper we describe how finite element and experimental modal analyses can be used to characterize the dynamic behavior of plates made from a new class of graphite reinforced silica/polymer matrix composite (GRSPMC) materials. An agreement is obtained between both methods, and the results show that GRSPMC materials can be modeled and tested using tools similar to those applied to the study of classical composite laminates.     

作大范围运动矩形板的动力学建模理论研究

研究了初应力法的作大范围运动矩形板的建模理论。根据连续介质理论,考虑应变-位移中的非线性项,用一致质量有限元法对柔性板进行离散,基于Jourdain速度变分原理导出定轴转动下大范围运动为自由的柔性板刚-柔耦合动力学方程。从其刚柔耦合动力学方程出发,考虑在大范围运动已知情况下的结构动力学方程。通过引入准静态概念,把其结构动力学方程转化为准静态方程。对纵向和横向变形节点坐标进行坐标分离,解出与纵向变形相关的准静态方程,得到准静态时的纵向应力表达式,从而获得附加刚度项;并对此非惯性系下作大范围运动柔性板的结构动力学方程进行数值仿真,验证了采用初应力法柔性板的动力学建模方法来计算经历大范围运动的不规则柔性板的动力学响应是可行的,体现了初应力法对柔性板建模的优越性。     

桁架板等效刚度分析

桁架材料的连续介质等效模型的研究已有相当基础,而工程中桁架材料往往以类板结构形式出现,其变形表现出明显的弯曲特征。将类板桁架材料采用弯曲板模型模拟,研究合理的方法确定等效板模型的刚度具有重要意义。本文在基于Kirchhoff假定的小挠度薄板弹性理论框架下,研究了类板桁架材料的等效弯曲薄板模型,提出了确定薄板模型等效刚度的基于Dirichlet位移边界条件的代表体元法,给出了确定各刚度系数所对应的代表体元的边界位移形式。具体计算了几种典型形式桁架板的等效刚度,并采用有限元离散模型和实验技术分析了桁架板在一定的边界约束和荷载作用下的响应,并与等效板模型的分析结果进行了对比。结果表明,在响应分析中,具有等效刚度的薄板模型可准确模拟类板桁架材料;连续介质板等效刚度计算的积分法不能给出准确的桁架板等效刚度,而基于Dirichlet位移边界条件的代表体元法获得的等效板的刚度具有很高的精度。     

Numerical investigation on the position of holes for reducing stress concentration in composite plates with bolted and riveted joints

This paper studies the effects of fiber orientaion and holes position on stress concentration and the determination of weakened areas in the composite of glass fiber reinforced epoxy resin around the hole for joints by using the finite element method. In this study, for the observation of areas affected by stress concentration Tsai-Wu failure criterion is used to determine the failed elements and ANSYS Software is implemented for modeling. In order to compare the effect of geometric parameters on stress concentration around the holes, two types of hole position arrangement along with fibers orientation have been studied. Results show that the stress concentration coefficient is lower in the second type of holes arrangement in comparison with the first type for the same component dimensions. Increasing the distance from hole center to upper or lower edge of the sample and also decreasing the distance between holes, would result in an increase in the stress concentration.     

非完善板屈曲路径的有限元增量摄动法

本文以Thompson一般稳定性理论为基础,提出非完善结构(有初始几何缺陷)屈曲平衡路径分析的有限元增量摄动法,它克服了增量迭代法及摄动法各自的缺点,利用增量摄动法,还建立了非完善板屈曲平衡路径的数学分析模型,对非完善矩形板在各种边界条件下的屈曲路径实现了数值程序分析,得到了符合实验的结果。     

Constant Reynolds number turbulence downstream of an orificed perforated plate

Quasi-isotropic turbulence was experimentally produced in a wind tunnel via an orificed, perforated plate (OPP) at 10.5 m/s. The OPP consists of a lattice arrangement of 38.1 mm holes occupying 57% of the plate area. The OPP turbulence was found to be homogeneous over the cross section normal to the mean flow with Gaussian-like turbulence fluctuation. The isotropy of the turbulence field as portrayed by the streamwise/lateral turbulence intensity ratio was found to be approximately 1.1. The OPP turbulence is essentially self-preserving wherein the Taylor microscale Reynolds number remains nearly constant and the lateral velocity correlations collapse into a single curve.     

各向异性弹塑性中厚度板壳的有限元分析

本文在文献［２，３］的基础上，提出了一个解各向异性弹塑性中厚度板壳问题的有限元方法。考虑材料各向异性的特点，采用了Ｈｉｌｌ推广的Ｈｕｂｅｒ－Ｍｉｓｅｓ屈服准则；借用Ｏｗｅｎ的剪切修正系数，正确计及了叠层复合材料壳体的横向剪切效应；为了避免“自锁”现象，文中采用了９节点的Ｈｅｔｅｒｏｓｉｓ二次壳单元；特别是本文利用插值外推的思想，提出了一个带预测的弧长增量控制法，显著提高了确定变形路径的计算效率。几个数值算例表明本文给出的有限元方法对于各向异性中厚度板壳的弹塑性分析有较好的精度，尤其是对具有复杂变形路径的结构计算，收敛速度提高更快。     

蜂窝夹层板结构等效模型比较分析

在对蜂窝夹层板结构进行有限元分析时,要对其进行等效处理,采取等效方法的合理性将直接影响到计算结果的准确性.分别采用Reissner理论、Hoff理论、三明治夹芯板理论三种不同的等效方法建立有限元模型,然后进行了静力分析和模态分析,并将每种等效方法的计算结果与实体单元建立的蜂窝夹层板模型计算结果进行了比较.与Reissn...     

Construction of rectangular displacement-based element for thick/thin plates

In this paper, a method of constructing displacement-based element for thick/thin plates is developed by using the technique of generalized compatibility, and a rectangular displacement based element with 12 degrees of freedom for thick/thin plates is presented. This method enjoys a good accuracy with simple formulation and is free of shear locking as the thickness of the plate approaches zero. The project supported by National Natural Science Foundation of China through Grant No. 59208075     

一种适用于简支多边形薄板问题的有限单元法

简支多边形薄板双调和定解问题可分解为二个互不耦合的Ｐｏｉｓｓｏｎ方程的定解问题，通过比拟，可用二维平面应力（应变）单元进行有限元分析。数值算例表明，本文采用的方法在较粗的网格下即可得到较高的精度，而且具有速度快、占用计算机内存少等优点。