Structure of amorphous GeSe thin films

Amorphous films of GeSe_0.7 and GeSe_2.4 have been examined by energy-filtered scanning electron diffraction and by electron microscopy. Radial distribution analysis of the GeSe_0.7 intensity curves indicates that the local atomic order of these films differs considerably from the distorted rocksalt structure of bulk crystalline GeSe. Radial distribution studies also indicate a change in the structure of GeSe_0.7 and GeSe_2.4 films supported on copper mesh as they are heated with an electron beam. Gross structural features are not observable in the electron micrographs of the amorphous films. This does not eliminate, however, the possibility of the presence of glassy phase separation on a fine scale in the heat-treated films.     

无机化合物Na2Ge2Se5多晶合成研究

硒锗钠(Na2Ge2Se5)是一种极具潜质新型红外非线性材料.但该化合物具有明显的制备难点.根据其制备特点,自行设计并搭建反应装置,高效、安全制备其前驱体Na2Se;然后将制备的Na2Se与Ge、Se按化学计量比称取,在单温区合成炉中合成Na2Ge2Se5多晶料.对制备的Na2Se、Na2Ge2Se5多晶进行XRD,SEM、EDS等分析测试表明产物为高纯单相Na2Se、Na2Ge2Se5多晶.     

Self-diffusion in the chalcogenide glass system SeGeAs

Se, As and Ge self-diffusion were investigated in three different glasses of the chalcogenide system SeGeAs by means of the radioactive tracers ⁷⁵Se, ⁷³As and ⁷¹Ge. All D values (Se between 200 and 290°C, As between 240 and 290°C and Ge between 280 and 295°C) lay between 10^?14 and 5 × 10^?16 cm² s^?1. The diffusion profiles were analyzed using a chemical micro-etching technique. Roles of glass structure and possible diffusion mechanism are discussed.     

Optical absorption of glassy semiconductors of the GeSbSe system

The optical transmittance of chalcogenide glasses Ge₂SbSe₇ (I), Ge₃SbSe₆ (II), GeSb₂Se₇ (III) and GeSbSe₃ (IV) was studied in the near infrared spectral region, 0.7–25 μm. The longwavelength tail of the absorption edge can be described by Urbach's rule. At higher absorption levels the absorption coefficient K depends quadratically on the energy of incident radiation. The temperature dependence of the absorption edge is discussed and the optical gaps 1.77 eV (I), 1.67 eV (II), 1.66 eV (III), 1.57 eV (IV) together with the corresponding temperature coefficients are also determined. The studied glasses are quite transparent in the 600–5000 cm^?1 wavenumber range.     

Nanophase separation and effects on properties of Ge–As–Se chalcogenide glasses

Nanophase separation in the bulk Ge–As–Se chalcogenide glasses was observed by SEM and supported by XRD and IR measurements. Effects of nanophase separation on glass transition temperature (T_g), microhardness (H_v), optical band gap (E_opt) and thermal expansion coefficient (α) were investigated in terms of glass rigidity transitions. According to the correlations between the properties and average coordination number Z, it is established that nanophase separation becomes more intensive when Z is larger than 2.64.     

Differential thermal analysis of Ag–Ge–Se,Ge–Se charge materials in the process of their heating and Ag8GeSe6, GeSe2 compound synthesis

This is the first comprehensive study of the processes of phase transformations (PT) and chemical reactions (CR) that accompany Ge–Se and Ag–Ge–Se charge material heating in stoichiometric proportions corresponding to GeSe₂ compounds, Ag₈GeSe₆ argyrodite and elementary selenium. The investigation was carried out by means of the differential thermal analysis (DTA) method. The PT in selenium and the main types of PT and CR of the formation of GeSe₂, Ag₈GeSe₆ compounds have been identified. The characteristic heats and temperature ranges of reaction processes have been determined. Ag₈GeSe₆ and GeSe₂ compounds formation has been experimentally demonstrated due to the DTA and X-ray analysis.     

γ-ray irradiation induced multiple effects on Ge–As–Se chalcogenide glasses

In this work, multiple effects of γ-ray irradiation on properties of bulk Ge–As–Se chalcogenide glasses were studied. Increased density (ρ), thermal expansion coefficient (α) and decreased optical band gap (E_opt) were observed after irradiation, depending on glass compositions. Glasses with stoichiometric (GeSe₂)_100?x(As₂Se₃)_x compositions showed linear correlations between As₂Se₃ proportion x and irradiation sensitivity, which is expressed by Δρ/ρ, Δα/α and ΔE_opt/E_opt. Nonstoichiometric glasses (Ge₂Se₃)_100?x(As₂Se₃)_x exhibited irregular variations. The phenomena are discussed in terms of chemical bonds transition and structural evolution under γ-ray irradiation.     

The crystallization kinetics of nanothin amorphous TlGa1 − x Ge x Se2 films

Crystallography Reports - The kinetics of phase transformations of amorphous Ge-doped TlGaSe2 films has been investigated by kinematic electron diffraction. It is shown that the crystallization of...     

Optical properties of Ge–Se–Te wedge-shaped films by using only transmission spectra

Amorphous Ge₁₀Se_90?xTe_x (with x = 0, 5, 10 and 15 at.%) thin films were prepared by thermal evaporation method. The optical transmission spectra of these films were measured in the wavelength range of 500–2500 nm in order to drive the refractive index and the absorption coefficient of these films. Applying the analytical expressions proposed by Swanepoel, enabling the calculations of optical constants of thin films with non-uniform thickness with high accuracy. Furthermore, the dispersion of the refractive index is discussed in terms of the single-oscillator Wemple and DiDomenico model. It was found that, the mechanism of the optical absorption follows the rule of the allowed non-direct transition. The optical band gab, E_g, and the oscillator energy, E_o, decrease while the dispersion energy, E_d, increases by increasing Te content. The relationship between the obtained results and the chemical compositions of the Ge₁₀Se_90?xTe_x thin films were discussed in terms of the chemical bond approach, the excess of Se–Se homopolar bonds and the cohesive energy (CE).     

The composition dependence of electrical switching behavior of Ge7Se93−xSbx glasses

Bulk Ge₇Se_93?xSb_x (21 ? x ? 32) glasses are prepared by melt quenching method and electrical switching studies have been undertaken on these samples to elucidate the type of switching and the composition and thickness dependence of switching voltages. On the basis of the compressibility and atomic radii, it has been previously observed that Se-based glasses exhibit memory switching behavior. However, the present results indicate that Ge₇Se_93?xSb_x glasses exhibit threshold type electrical switching with high switching voltages. Further, these samples are found to show fluctuations in the current–voltage (I–V) characteristics. The observed threshold behavior of Ge₇Se_93?xSb_x glasses has been understood on the basis of larger atomic radii and lesser compressibilities of Sb and Ge. Further, the high switching voltages and fluctuations in the I–V characteristics of Ge–Se–Sb samples can be attributed to the high resistance of the samples and the difference in thermal conductivities of different structural units constituting the local structure of these glasses. The switching voltages of Ge₇Se_93?xSb_x glasses have been found to decrease with the increase in the Sb concentration. The observed composition dependence of switching voltages has been understood on the basis of higher metallicity of the Sb additive and also in the light of the Chemically Ordered Network (CON) model. Further, the thickness dependence of switching voltages has been studied to reassert the mechanism of switching.     

Studies of amorphous GeSeTe alloys (I): Preparation and calorimetric observations

We have used differential scanning calorimetry (DSC) to examine the thermally induced transformations of bulk and thin-film amorphous alloys within a large portion of the GeSeTe system. Most chalcogen-rich compositions showed a discontinuous increase of heat capacity when heated through the glass transition temperature T_G. The Ge-rich compositions, which could only be prepared as sputtered amorphous films, were invariably characterized by an irreversible exothermic crystallization process on heating, beginning at the crystallization temperature T_X. Values of T_g and T_X have been tabulated for all alloys investigated and the compositional dependence of T_g has been examined in the light of recent models for viscous flow in glass-forming chalcogenide systems. In addition, a region of liquid immiscibility has been observed in the vicinity of Ge₂₀Se₄₀Te₄₀ in which a GeSe₂-rich liquid phase segregates from a tellurium-rich liquid phase. The existence and limits of this immiscibility region have been rationalized on the basis of ionic perturbations to the covalent bonding. The segregation of a GeSe₂-rich liquid increases the concentration of GeSe bonds which are the strongest and most ionic of the six angle-bond types which can occur in this system.     

Multilayer planar structures prepared from chalcogenide thin films of As–Se and Ge–Se systems and polymer thin films using thermal evaporation and spin-coating techniques

We report the preparation of multilayers based on polyamide–imide polymer and As–Se or Ge–Se chalcogenide thin films. Chalcogenide films of As–Se and Ge–Se systems were deposited using a thermal evaporation method periodically alternating with spin-coated Polyamide–imide films. Fifteen layers of PAI + As–Se system and nineteen layers of PAI + Ge–Se system were coated. Optical properties of prepared multilayers have been established using UV–vis–NIR and Ellipsometric spectroscopy. Both, PAI + As–Se and PAI + Ge–Se multilayer systems, exhibited the high-reflection bands centered around 830 nm and 1350 nm, respectively. The shift of the band position of PAI + Ge–Se multilayers to lower energies was caused by higher thickness of Ge–Se films. The bandwidth of reflection band of 8 PAI + 7 As–Se multilayer was ～90 nm while bandwidth of PAI + Ge–Se system decreased to ～70 nm because Ge–Se films have 0.1 lower refractive index against As–Se films. Design of 1D-photonic crystals based on alternating chalcogenide and polymer films is a new opportunity for application of chalcogenide thin films as optical materials for near-infrared region.     

Electrical and optical properties of the AsTeIn and GeSeIn chalcogenide systems

The influence of indium on the optical and properties of As_2−xTe_3−xxIn_2x, As_20−xTe_80−xIn_2x and Ge_20−xSe_80−xIn_2x is described. In Te-containing glasses the Fermi level is shifted by 0.05 eV and in Se-containing glasses by 0.2 eV towards the valence band.     

非晶态Se及掺杂Sb的Se薄膜晶化特性研究

利用光学显微镜和X射线衍射技术,分析了非晶态Se和掺杂Sb的Se薄膜的晶化特性.Se薄膜由于保存周期不同以及Sb掺杂到Se中的Sb含量的多少都会影响Se的晶化特性;在热处理下薄膜的晶化呈现各向异性的择优生长.分析了晶化过程中微裂纹的产生,晶界的产生和体积收缩.薄膜与衬底之间的热应力是产生微裂纹的主要因素.     

Glass formation and properties of chalcogenide systems XVIII. On glass formation in the system GePbSeTe

The glass formation range of the system GePbSeTe has been investigated. For selected series properties such as the mole volume, glass transition temperature and the electrical direct current conductivity are discussed with respect to their dependence on composition. For some series the results can be compared with the properties of glasses containing Sn instead of Pb. The change in the energy gap for the crystalline compounds SnSe, SnTe, PbSe and PbTe is reflected by the data of the Sn or Pb containing glasses.     

Concentration dependence of Dy3+:1.3 μm luminescence in Ge–Ga–Sb–Se glasses

The Ge₂₅Ga₅Sb₅Se₆₅ glasses, doped with 0.01, 0.05, 0.1, 0.2, and 0.5 mol% of Dy³⁺ ions are prepared and the concentration dependence of Dy³⁺:1.3 μm luminescence is investigated. Remarkable energy migration between Dy³⁺ ions occurs as its concentration is more than 0.05 mol%. With further increasing amount of Dy³⁺ ions, the decay time of the 1.3 μm fluorescence decreases rapidly. All the decays are simple exponential and possible regimes of the donor decay are discussed.     

Evolution of glass properties during a substitution of S by Se in Ge28Sb12S60 −xSex glass network

In this paper, a detailed study to examine the influence of chalcogen S/Se mole % in the Ge₂₈Sb₁₂S_60 ?xSe_x glass system, with x = 0, 15, 30, 45 and 60, is presented that provides insight into the effect of chalcogen content on the glass network and properties. Specifically, we report results of a systematic study to evaluate the relationship between compositional variation, glass properties and dominant bonding configurations. These materials are important to applications in optics manufacturing where correlation of physical and optical properties is required to predict fabrication behavior and ultimate material performance. It has been found that the dominant bonds in the glass system change upon reaching a specific molar ratio (percentage, %) of chalcogen substitution, between 30 < x < 45 mol%, changing from Ge―Se to Sb―Se bonds as the dominant bond type. This singularity has been observed using micro-Raman spectroscopy and X-ray photoelectron spectroscopy. This effect of the dominant bond configurational change was also shown to impart changes in important physical properties including micro-hardness, thermal properties, and the glass' viscometric behavior. Results indicate that the observed dominant bond change was responsible for a constant value in the evolution of both the micro-hardness and calorimetric glass transition temperature. The viscosity was also affected by the change in dominant bond type, breaking the monotony of the viscosity evolution during the S substitution, due to the total strength of the vitreous system which does not linearly increase.     

Structural characterization and phase transformation kinetics of Se58Ge42−xPbx (x = 9, 12) chalcogenide glasses

The glass transition behavior and crystallization kinetics of Se₅₈Ge_42?xPb_x (x = 9, 12) have been investigated using Differential Scanning Calorimetry (DSC) at five different heating rates under non-isothermal conditions. It has been observed that these glassy systems exhibit single glass transition and double crystallization on heating. The XRD pattern revealed that the considered glasses get crystallized into GeSe₂ and PbSe/Se phases after annealing at 633–643 K for 2 h. The GeSe₂ and Se phases were found to crystallize in monoclinic structure while, PbSe phase crystallizes in cubic structure. Besides this, a mixed phase was also observed in DSC thermograms after annealing. The kinetic studies include determination of various parameters such as Avrami exponent (n), frequency factor (K_o), dimensionality of growth (m), the activation energy for glass transition (E_t) and for crystallization (E_c). The values of E_t increases while that of E_c decreases after annealing. Also, dimensionality of growth decreases to one dimension from two and three dimensions after annealing.     

Local atomic arrangement and bonding studies in amorphous As2Se3As4Se4

The local atomic arrangement in amorphous As₂Se₃As₄Se₄ glasses was investigated with ESCA (electron spectroscopy for chemical analysis) and RDF (radial-distribution function) analysis. Measured changes of RDF peak areas and ESCA chemical shifts give direct evidence for the preservation of the local bonding schemes of both crystalline As₂Se₃ and As₄Se₄ in their amorphous states. The valence-band structures of amorphous As, Se, As₂Se₃ and As₄Se₄ are also measured with ESCA and discussed in conjunction with the bonding schemes of these glasses.     

石墨烯上远程外延Ge纳米柱

远程外延能够突破传统外延中晶格匹配、热匹配等限制,近年来得到了广泛的关注。Ⅲ-Ⅴ族和Ⅲ-氮化合物半导体已经成功在石墨烯上远程外延生长,但Ⅳ族半导体的远程外延很少被报道。本文首次借助于分子束外延技术在石墨烯上远程外延制备了半导体Ge纳米柱,研究了其生长特性及剥离转移。结果表明:远程外延生长的Ge纳米柱为[111]c晶向,集中分布在石墨烯的褶皱以及衬底Cu-Ni原子台阶处;随着生长温度的提高,Ge纳米柱的高度和密度逐渐下降,但直径差别不大,约为55~65 nm;此外,自组织生长的Ge纳米棒显示无应变的生长状态;引入少量Sn形成GeSn纳米柱,能够显著提升Ge纳米柱的面密度。同时,生长的Ge纳米柱可实现剥离,有望实现异质集成,应用于先进光电子器件等领域。