Structural Investigation and Photoluminescent Properties of Gadolinium(III), Europium(III) and Terbium(III) 3-Mercaptopropionate Complexes

This work reports on the synthesis, crystallographic determination and spectroscopic characterization of gadolinium(III), terbium(III) and europium(III) 3-mercaptopropionate complexes, aqua-tris(3-mercaptopropionate)lanthanide(III) - [Ln(mpa)₃(H₂O)]. The Judd-Ofelt intensity parameters were experimentally determined from emission spectrum of the [Eu(mpa)₃(H₂O)]complex and they were also calculated from crystallographic data. The complexes are coordination polymers, where the units of each complex are linked together by carboxylate groups leading to an unidimensional and parallel chains that by chemical interactions form a tridimensional framework. The emission spectrum profile of the [Eu(mpa)₃(H₂O)] complex is discussed based on point symmetry of the europium(III) ion, that explains the bands splitting observed in its emission spectrum. Photoluminescent analysis of the [Gd(mpa)₃(H₂O)] complex show no efficient ligand excitation but an intense charge transfer band. The excitation spectra of the [Eu(mpa)₃(H₂O)] and [Tb(mpa)₃(H₂O)] complexes do not show evidence of energy transfer from the ligand to the excited levels of these trivalent ions. Therefore the emission bands are originated only by direct f-f intraconfigurational excitation of the lantanide(III) ions.     

Iron-57 mössbauer spectroscopic study of six-coordinate and seven-coordinate iron(III)-EDTA complexes

Newly prepared six-coordinate M[Fe(edta)] (M=Li, Na, K, Rb) and seven-coordinate H[Fe(edta)(H₂O)].H₂O were characterized by Mössbauer spectroscopy. The hygroscopic six-coordinate complexes were found to have high-spin Fe³⁺ ions in distorted octahedral sites.     

Density functional theory study of substituent effects on gas‐phase heterolytic Fe–O and Fe–S bond energies of m‐G‐C6H4OFe(CO)2(η5‐C5H5) and m‐G‐C6H4SFe(CO)2(η5‐C5H5)

The knowledge of accurate bond strengths is a fundamental basis for a proper analysis of chemical reaction mechanisms. Quantum chemical calculations at different levels of theory have been used to investigate heterolytic Fe–O and Fe–S bond energies of (meta‐substituted phenoxy)dicarbonyl(η⁵‐cyclopentadienyl) iron [m‐G‐C₆H₄OFp ( 1 )] and (meta‐substituted benzenethiolato)dicarbonyl(η⁵‐cyclopentadienyl) iron [m‐G‐C₆H₄SFp ( 2 )] complexes. In this study, Fp is (η⁵‐C₅H₅)Fe(CO)₂, and G is NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂. The results show that Tao–Perdew–Staroverov–Scuseria and Becke's power‐series ansatz from 1997 with dispersion corrections functionals can provide the best price/performance ratio and accurate predictions of ΔH_het(Fe–O)'s and ΔH_het(Fe–S)'s. The excellent linear free energy relations [r = 1.00 (g, 1e), 1.00 (g, 2b)] among the ΔΔH_het (Fe–O)'s and δΔG⁰ of O?H bonds of m‐G‐C₆H₄OH or ΔΔH_het(Fe–S)'s and ΔpK_a's of S?H bonds of m‐G‐C₆H₄SH imply that the governing structural factors for these bond scissions are similar. And, the linear correlations [r = ?0.97 (g, 1 g), ?0.97 (g, 2 h)] among the ΔΔH_het (Fe–O)'s or ΔΔH_het(Fe–S)'s and the substituent σ_m constants show that these correlations are in accordance with Hammett linear free energy relationships. The inductive effects of these substituents and the basis set effects influence the accuracy of ΔH_het(Fe–O)'s or ΔH_het(Fe–S)'s. The ΔΔH_het(Fe–O)'s(g) (1) and ΔΔH_het(Fe–S)'s(g)(2) follow the capto‐dative Principle. The substituent effects on the Fe–O bonds are much stronger than those on the less polar Fe–S bonds. Insight from this work may help the design of more effective catalytic processes. Copyright © 2016 John Wiley & Sons, Ltd.     

Remote substituent effects on gas‐phase homolytic Fe–O and Fe–S bond energies of p‐G‐C6H4OFe(CO)2(η5‐C5H5) and p‐G‐C6H4SFe(CO)2(η5‐C5H5) studied using Hartree–Fock and density functional theory methods

Metal–ligand bond enthalpy data can afford invaluable insights into important reaction patterns in organometallic chemistry and catalysis. In this paper, the Fe–O and Fe–S homolytic bond dissociation energies [ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s] of two series of para‐substituted phenoxydicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄OFp ( 1 )] and (para‐substituted benzenethiolato)dicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄SFp ( 2 )] were studied using Hartree–Fock and density functional theory (DFT) methods with large basis sets. In this study, Fp is (η⁵‐C₅H₅)Fe(CO)₂, and G are NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂. The results show that DFT methods can provide the best price/performance ratio and accurate predictions of ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s. The remote substituent effects on ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s [ΔΔH_homo(Fe–O)'s and ΔΔH_homo(Fe–S)'s] can also be satisfactorily predicted. The good correlations [r = 0.98 (g, 1), 0.98 (g, 2)] of ΔΔH_homo(Fe–O)'s and ΔΔH_homo(Fe–S)'s in series 1 and 2 with the substituent σ_p⁺ constants imply that the para‐substituent effects on ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s originate mainly from polar effects, but those on radical stability originate from both spin delocalization and polar effects. ΔΔH_homo(Fe–O)'s ( 1 ) and ΔΔH_homo(Fe–S)'s ( 2 ) conform to the captodative principle. Insight from this work may help the design of more effective catalytic processes. Copyright © 2013 John Wiley & Sons, Ltd.     

Substituent effects on gas‐phase homolytic Fe–O and Fe–S bond energies of m‐G‐C6H4OFe(CO)2(η5‐C5H5) and m‐G‐C6H4SFe(CO)2(η5‐C5H5) studied using Hartree–Fock and density functional theory methods

The thermochemistry of organometallic complexes in solution and in the gas phase has been an area of increasing research interest. In this paper, the Fe–O and Fe–S homolytic bond dissociation energies [ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s] of two series of meta‐substituted phenoxydicarbonyl(η⁵‐cyclopentadienyl) iron [m‐G‐C₆H₄OFp ( 1 )] and (meta‐substituted benzenethiolato)dicarbonyl(η⁵‐cyclopentadienyl) iron [m‐G‐C₆H₄SFp ( 2 )] were studied using Hartree–Fock and density functional theory methods with large basis sets. In this study, Fp is (η⁵‐C₅H₅)Fe(CO)₂, and G are NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂. The results show that Tao–Perdew–Staroverov–Scuseria and Minnesota 2006 functionals can provide the best price/performance ratio and accurate predictions of ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s. The polar effects of the meta substituents show that the dominant role to the magnitudes of ΔΔH_homo(Fe–O)'s or ΔΔH_homo(Fe–S)'s. σ_α·, σ_c· values for meta substituents are all related to polar effects. Spin‐delocalization effects of the meta substituents in ΔΔH_homo(Fe–O)'s and ΔΔH_homo(Fe–S)'s are small but not necessarily zero. Molecular effects rather than ΔΔH_homo(Fe–O)'s and ΔΔH_homo(Fe–S)'s are more suitable indexes for the overall substituent effects on ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s. The meta substituent effects of meta‐electron‐withdrawing groups on the Fe–S bonds are much stronger than those on the Fe–O bonds. For meta‐electron‐donating groups, the meta substituent effects have the comparable magnitudes between series 1 and 2 . ΔΔH_homo(Fe–O)'s ( 1 ) and ΔΔH_homo(Fe–S)'s ( 2 ) conform to the captodative principle. Insight from this work may help the design of more effective catalytic processes. Copyright © 2015 John Wiley & Sons, Ltd.     

Mössbauer study on the thermal decomposition of potassium tris (oxalato) ferrate(III) trihydrate and bis (oxalato) ferrate(II) dihydrate

The thermal decompositions of K₃Fe(ox)₃ 3 H₂O and K₂Fe(ox)₂ 2 H₂O in nitrogen have been studied using Mössbauer spectroscopy, X-ray diffraction and thermal analysis methods in order to determine the nature of the solid residues obtained after each stage of decomposition. Particularly, after dehydration at 113°C, the ferric complex is reduced into a ferrous compound, with a quadrupole splitting of 3.89 mm/s, which corresponds to the anhydrous form of K₂Fe(ox)₂ 2 H₂O.     

Hartree–Fock and density functional theory study of remote substituent effects on gas‐phase heterolytic Fe–O and Fe–S bond energies of p‐G‐C6H4OFe(CO)2(η5‐C5H5) and p‐G‐C6H4SFe(CO)2(η5‐C5H5)

The knowledge of accurate bond strengths is a fundamental basis for a proper analysis of chemical reaction mechanisms. Quantum chemical calculations at different levels of theory have been used to investigate heterolytic Fe–O and Fe–S bond energies of para‐substituted phenoxydicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄O(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄OFp ( 1 ), where G = NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂] and para‐substituted benzenethiolatodicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄S(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄SFp ( 2 )] complexes. The results show that BP86 and TPSSTPSS can provide the best price/performance ratio and more accurate predictions in the study of ΔH_het(Fe–O)'s and ΔH_het(Fe–S)'s. The excellent linear free‐energy relations [r = 0.99 (g, 1a), 1.00 (g, 2b)] among the ΔΔH_het (Fe–O)'s and Δpk_a's of O–H bonds of p‐G‐C₆H₄OH or ΔΔH_het(Fe‐S)'s and Δpk_a's of S–H bonds of p‐G‐C₆H₄SH imply that the governing structural factors for these bond scissions are similar. And the linear correlations [r = ?0.99 (g, 1g), ?0.98 (g, 2h)] among the ΔΔH_het (Fe‐O)'s or ΔΔH_het(Fe‐S)'s and the substituent σ_p^? constants show that these correlations are in accordance with Hammett linear free‐energy relationships. The polar effects of these substituents and the basis set effects influence the accuracy of ΔH_het(Fe–O)'s or ΔH_het(Fe–S)'s. ΔΔH_het(Fe–O)'s(g) ( 1 ) and ΔΔH_het(Fe–S)'s(g)( 2 ) follow the Capto‐dative principle. The substituent effects on the Fe–O bonds are much stronger than those on the less polar Fe–S bonds. Insight from this work may help the design of more effective catalytic processes. Copyright © 2013 John Wiley & Sons, Ltd.     

XAFS investigations of copper(II) complexes with tetradentate Schiff base ligands

X‐ray absorption fine structure spectra have been investigated at the K‐edge of copper in copper(II) salen/salophen complexes: [Cu(salen)] (1), [Cu(salen)CuCl₂].H₂O (2), [Cu(salophen)] (3) and [Cu(salophen) CuCl₂].H₂O (4), where salen^2? = N,N′‐ethylenebis (salicylidenaminato); salophen^2? = o‐phenylenediaminebis(salicylidenaminato). Complexes 1 and 3 are supposed to have one type of copper centers (called (Cu1)) and complexes 2 and 4 two types of copper centers (called (Cu1) and (Cu2)) having different coordination environments and geometries. A theoretical model has been generated using the available crystallographic data of complex 1 and it has been used for analysis of the extended X‐ray absorption fine structure (EXAFS) data of the four complexes to obtain the structural parameters for (Cu1) center. For this center, the obtained Cu–Cu distance (3.2 Å) verifies the binuclear nature of all the complexes. For determining the coordination geometry around (Cu2) center in 2 and 4, a theoretical model has been generated using the crystal structure of a Cu(II) complex, [Cu(C₁₆H₁₂N₂O₂Cl₂)]. This theoretical model has been fitted to the EXAFS data of 2 and 4 to obtain the structural parameters for (Cu2) center. The present analysis shows that (Cu1) center has square pyramidal geometry involving 2N and 3O donor atoms, whereas (Cu2) center has distorted tetrahedral geometry with 2O and 2Cl donor atoms. The values of the chemical shifts and presence of typical Cu(II) X‐ray absorption near‐edge spectroscopy features suggest that copper is in the +2 oxidation state in all these complexes. The intensity of ls → 3d pre‐edge feature has been used to investigate the geometry and binuclear nature of the complexes. Copyright © 2012 John Wiley & Sons, Ltd.     

A study of the thermal decomposition of iron(II) and iron(III) rubidium oxalates using the Mössbauer effect

The thermal decompositions of Rb₃Fe(ox)₃ 4 H₂O and Rb₂Fe(ox)₂ 6 H₂O have been studied using Mössbauer spectroscopy and thermal analysis methods (TGA, DSC). It is shown that after dehydration, the ferric complex is reduced into a ferrous compound, with a large quadrupole splitting (3.84 mm/s), which corresponds to the anhydrous form of Rb₂Fe(ox)₂ 6 H₂O.     

Synthesis, crystal structure, Cu doped EPR, thermal and voltammetric studies of [Ni(isonicotinamide)2(H2O)4]·(sac)2 single crystal

The single crystal of [Ni(ina)₂(H₂O)₄]·(sac)₂, (NINS), (ina is isonicotinamide and sac is saccharinate) complex has been prepared and its structural, spectroscopic and thermal properties have been determined. The title complex crystallizes in monoclinic system with space group P2₁/c, Z=2. The octahedral Ni(II) ion, which rides on a crystallographic centre of symmetry, is coordinated by two monodentate ina ligands through the ring nitrogen and four aqua ligands to form discrete [Ni(ina)₂(H₂O)₄] unit, which captures two saccharinate ions in up and down positions, each through intermolecular hydrogen bands. The magnetic environment of copper(II) doped NINS crystal has also been identified by electron paramagnetic resonance (EPR) technique. The g and A values of Cu²⁺ doped NINS single crystal were calculated from the EPR spectra recorded in three mutually perpendicular planes. These values indicated that the paramagnetic centre has a rhombic symmetry with the Cu²⁺ ion having distorted octahedral environment. The complex exhibits only metal centred electroactivity in the potential range of −2.00, 1.25 V versus Ag/AgCl reference electrode.     

Magnetic and Mössbauer studies of cyanide-bridged bimetallic assembly [Mn(cyclam)][Fe(CN)6]·3H2O

Cyanide-bridged bimetallic assembly [Mn(cyclam)][Fe(CN)₆]·3H₂O (cyclam=1,4,8,11-tetraazacyclotetradecane) was synthesized from the reaction of trans-[MnCl₂(cyclam)]Cl with K₃Fe(CN)₆. A linear chain structure consisting of alternating [Mn(cyclam)]³⁺ and [Fe(CN)₆]³⁻ units was indicated by the IR and Mössbauer spectra. The variable-temperature magnetization and Mössbauer measurements revealed that this complex exhibited a long-range ordering below 6.8 K. The magnetic behavior of the complex was based on intrachain ferromagnetic and interchain antiferromagnetic interactions.     

Mössbauer studies of photochemical reaction products of Ru(bpy)3 2+ iron cyanide double complexes

The reductive and the oxidative electron-transfer photochemical reaction system of light-irradiated the mix solutions of Ru(bpy)₃ ²⁺ with [Fe(CN)₆]^4–, [Fe(CN)₆]^3–, [Fe(CN)₅NO]^2– and PB (Prussian Blue) have been studied. The double complexes which isolated from the precipitates of the photochemical reaction have been identified by means of Mössbauer spectroscopy. In order to clarify the chemical states of these isolated double complexes, we have (prepared and) studied Mössbauer spectra of the double complexes such as [Ru(bpy)₃]₃[Fe(CN)₆]₂.14H₂O, [Ru(bpy)₃]₂[Fe(CN)₆].10H₂O, [Ru(bpy)₃][Fe(CN)₅NO].4H₂O, and [Ru(bpy)₃][PB]₂.xH₂O.     

High-spin metal-cyanide clusters: species incorporating [Mn(salen)] complexes as a source of anisotropy

The use of N,N′-ethylenebis(salycylideneiminato) (salen) complexes of Mn^III in assembling high-spin metal-cyanide coordination clusters with significant magnetic anisotropy is demonstrated. The reaction of [Mn(salen)(H₂O)₂]⁺with [Cr(CN)₆]³⁻ in aqueous solution generates {Cr[CNMn(salen)(H₂O)]₆}[Cr(CN)₆]·6H₂O (1), a previously reported compound featuring a heptanuclear cluster with a distorted octahedral geometry. A fit to the variable-temperature magnetic susceptibility data for 1 revealed the presence of weak antiferromagnetic coupling of within the cluster, giving rise to an S=21/2 ground state. In addition, variable-field magnetization data collected at low temperatures revealed the presence of magnetic anisotropy in the ground state, with the best fit yielding zero-field splitting parameters of D=+0.19 cm⁻¹ and A reaction intended to produce a direct analogue of 1 by employing [Fe(CN)₆]³⁻ in place of [Cr(CN)₆]³⁻ instead gave an unusually complex compound of formula {Fe(CN)₄[CNMn(salen)(MeOH)]₂}{[Mn(salen)(H₂O)]₂}[Mn(salen)(H₂O)(MeOH)]₂[Fe(CN)₆]·4H₂O (2). The crystal structure and magnetic properties of this compound are reported.     

Photofragmentation of hydrated iron ions Fe(HO) () at 532, 355 and 266 nm

Photofragmentation of Fe(H₂O)n ⁺ clusters (n =1-9) is investigated at three different wavelengths, 532, 355 and 266 nm. Two fragmentation pathways are observed depending essentially on the photon energy, but also on the parent size n. The fragmentation products belong to two ion families, Fe(H₂O)m ⁺ and FeOH(H₂O)m ⁺ , which correspond to dehydration and intracluster dehydrogenation reactions respectively. The ion yields are studied as a function of the laser fluence in order to determine the number of photons implied in the photofragmentation process. This allows us to estimate that the D[(H₂O)_n-1Fe^+-(H₂O)] bond energy is ranging between 0.44 eV and 0.55 eV for .Photon absorption cross sections are also derived from the fluence experiments, and two different behaviors are observed: i) At 355 nm, far away from any transition, progressive solvation of the metal ion results in an increasing absorption cross section from n =2 to n =9. This can be attributed to a forbidden transition of bare , which becomes progressively allowed because of the interaction with more and more water ligands. ii) At 266 nm, close to several allowed transitions of bare , a distinct maximum is observed for the absorption of ion. It may be attributed to a change in the spin multiplicity when switching from and on one hand to Fe(H₂O) on the other. Received: 11 November 1997 / Revised: 18 February 1998 / Accepted: 22 April 1998     

ESR spectral studies of a Cu(II) salicylidene tyrosine complex

A novel Schiff base derived from salicylidene and tyrosine and its copper(II) complex have been synthesized and characterized. The composition of the complex is K[CuL(Ac)] · H₂O, where L = H₁₃C₁₆NO₄. Electron spin resonance (ESR) spectra of the copper(II) complex were investigated at different temperatures and in various solvents. The second-order effect and the relaxation effect were observed in the solution spectrum at room temperature and satisfactorily explained by the spin Hamiltonian. The bonding parameters of the Cu(II) complex were calculated with spectral parameters from ESR spectra at low temperature. Its bonding characterization and stability were discussed. The result shows that both the in-plane σ-bond and the in-plane π-bond in the complex play an important role.     

Speciation of Mixtures of Copper (I) and Copper (II) Mixed Ligand Complexes by X-Ray Absorption Fine Structure Spectroscopy

Studies on speciation have been done in the mixtures of mixed ligand copper complexes. Three heterogeneous mixtures have been studied, each having one Cu(I) complex and one Cu(II) complex. The Cu(I) complex is [Cu(thu)Cl 0.5H₂O] (1) and the Cu(II) complexes are [Cu(L-phen)(bpy) H₂O] (2), [Cu(L-tyr)(phn) 2.5H₂O] (3), and [Cu(dien)(ina) 4H₂O.1/2SO₄] (4) (where thu = thiourea, phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine, tyr = tyrosine, dien = diethylenetriamine, and ina = isonicotinate anion). The mixtures have been prepared by mixing the Cu(I) complex with each of the Cu(II) complexes in the ratio of 1:1 by mole percentage. The X-ray absorption fine structure (XAFS) spectra have been recorded at the K-edge of copper in the mixtures as well as in the complexes, separately. The aim of the present work is to make a study of the different methods of speciation using XAFS, viz., principal component analysis (PCA) and the target transformation (TT) method, the linear combination fitting (LCF) method, derivative spectra methods, and normalized difference absorption edge spectra (NDAES) analysis. It has been shown that these methods can be used to determine the relative quantity of the mixed ligand complexes in their mixtures.     

Samarium(III) picrate tetraethylene glycol complex: Photoluminescence study and active material in monolayer electroluminescent

A mononuclear Sm(III) complex involving Pic and EO4 (where Pic=picrate anion and EO4=tetraethylene glycol) has been studied. It shows a bright-orange emission when used as active material in a monolayer electroluminescent device of ITO/EO4-Sm-Pic/Al. The crystal structure of the complex consists of [Sm(Pic)₂(H₂O)(EO4)]⁺ cation and [Pic]⁻ anion. The Sm(III) ion is coordinated with nine oxygen atoms from one EO4 ligand in a pentadentate mode, two Pic anions each in bidentate and monodentate modes, and one water molecule. Both the terminal alcohol groups of the acyclic EO4 ligand were involved in the O-H…O hydrogen bonding by infinite one-dimensional (1D) chain within a symmetry direction [0 1 0]. The photoluminescence (PL) spectrum of the thin film shows the typical spectral features of the Sm(III) ion (⁴G_5/2→⁶H_7/2 transitions). The root-mean-square (rms) of the roughness of thin film is 30.605 nm and indicates that the formation of the monolayer electroluminescent device is not uniform and retains a high crystallinity. Typical semiconductor current-voltage (I-V) property was also observed in this device with threshold and turn voltages of 2.8 and 6.2 V, respectively. The [Sm(Pic)₂(H₂O)(EO4)](Pic)·H₂O complex can be applied as a luminescent center in OLED for bright-orange emission.     

Hartree–Fock and density functional theory study of remote substituent effects on heterolytic Fe–N bond energies of p‐G‐C6H4NHFe(CO)2(η5‐C5H5) and p‐G‐C6H4N(COMe)Fe(CO)2(η5‐C5H5)

The nature and strength of metal–ligand bonds in organotransition‐metal complexes are crucial to the understanding of organometallic reactions and catalysis. Quantum chemical calculations at different levels of theory have been used to investigate heterolytic Fe–N bond energies of para‐substituted anilinyldicarbonyl(η⁵‐cyclopentadienyl)iron [p‐G‐C₆H₄NH(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄NHFp (1), where G = NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂] and para‐substituted α‐acetylanilinyldicarbonyl(η⁵‐cyclopentadienyl)iron [p‐G‐C₆H₄N(COMe)(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄N(COMe)Fp (2)] complexes. The results show that BP86 and TPSSTPSS can provide the best price/performance ratio and more accurate predictions in the study of ΔH_het(Fe–N)'s. The linear correlations [r = 0.98 (g, 1a), 0.93 (g, 2b)] between the substituent effects of heterolytic Fe–N bond energies [ΔΔH_het(Fe–N)'s] of series 1 and 2 and the differences of acidic dissociation constants (ΔpK_a) of N–H bonds of p‐G‐C₆H₄NH₂ and p‐G‐C₆H₄NH(COMe) imply that the governing structural factors for these bond scissions are similar. And the linear correlations [r = ?0.99 (g, 1c), ?0.92 (g, 2d)] between ΔΔH_het(Fe–N)'s and the substituent σ_p^? constants show that these correlations are in accordance with Hammett linear free energy relationships. The polar effects of these substituents and the basis set effects influence the accuracy of ΔH_het(Fe–N)'s. ΔΔH_het(Fe–N)'s(1, 2) follow the captodative principle. ME_{α‐COMe, para‐G}s include the influences of the whole molecules. The correlation of ME_{α‐COMe, para‐G}s with σ_p^? is excellent. ME_{α‐COMe, para‐G}s rather than ΔΔH_het(Fe–N)'s in series 2 are more suitable indexes for the overall substituent effects on ΔH_het(Fe–N)'s(2). Insight from this work may help the design of more effective catalytic processes. Copyright © 2012 John Wiley & Sons, Ltd.     

Structural characterisation of [Cu2(bptd) (H2O) Cl4] and [Ni2(bptd)2(H2O)4] Cl4·3H2O; evidence of null intramolecular exchanges by EPR and magnetic measurements

Using the 2,5-bis(2-pyridyl)-1,3,4-thiadiazole (bptd), we recently prepared [Cu₂(bptd) (H₂O) Cl₄] and [Ni₂(bptd)₂ (H₂O)₄] Cl₄, 3H₂O in which the magnetic centres are connected through one diazine+one chloro and two diazine ligand bridges, respectively. These two compounds are the first examples that show null intramolecular magnetic interactions despite M-M distances close to 3.7 Å within perfectly planar edifices:Down to , [Cu₂(bptd)Cl₄(H₂O)] is paramagnetic while, below T_t, half of the Cu²⁺ions interact, leading to residual paramagnetism of one Cu²⁺/f.u. Magnetic susceptibility measurements, EPR and pulsed EPR study indicate the original intermolecular nature of AF exchanges.[Ni₂(bptd)₂(H₂O)₄]Cl₄·3H₂O susceptibility obeys a Curie-law involving pure paramagnetism. Moreover, its EPR spectrum can be interpreted on the basis of virtual S=1 monomers. Below 70 K, Zero Field Splitting (D∼275 G) due to dipolar interactions without magnetic exchanges could be responsible for the LT spectra splitting. For both compounds, the thia role is suggested as partially responsible for the null-in-plane magnetic exchanges.     

Hartree–Fock and density functional theory study of remote substituent effects on heterolytic Fe―C bond energies of p‐G‐C6H4CH2Fe(CO)2(η5‐C5H5) and p‐G‐C6H4(H)(CN)CFe(CO)2(η5‐C5H5)

Knowledge of the strength of the metal–ligand bond breaking and formation is fundamental for an understanding of the thermodynamics underlying many important stoichiometric and catalytic organometallic reactions. Quantum chemical calculations at different levels of theory have been used to investigate heterolytic Fe―C bond energies of para‐substituted benzyldicarbonyl(η⁵‐cyclopentadienyl)iron, p‐G‐C₆H₄CH₂Fp [1, G = NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, NMe₂; Fp = (η⁵‐C₅H₅)(CO)₂Fe], and para‐substituted α‐cyanobenzyldicarbonyl(η⁵‐cyclopentadienyl)iron, p‐G‐PANFp [2, PAN = C₆H₄CH(CN)]. The results show that BP86 and TPSSTPSS can provide the best price/performance ratio and more accurate predictions in the study of ΔH_het(Fe―C)'s. The good linear correlations [r = 0.98 (g, 1a), 0.99 (g, 2b)] between the substituent effects of heterolytic Fe―C bond energies [ΔΔH_het(Fe―C)'s] of series 1 and 2 and the differences of acidic dissociation constants (ΔpK_a) of C―H bonds of p‐G‐C₆H₄CH₃ and p‐G‐C₆H₄CH₂CN imply that the governing structural factors for these bond scissions are similar. And the excellent linear correlations [r = ?1.00 (g, 1c), ?0.99 (g, 2d)] between ΔΔH_het(Fe―C)'s and the substituent σ_p^? constants show that these correlations are in accordance with Hammett linear free energy relationships. The polar effects of these substituents and the basis set effects influence the accuracy of ΔH_het(Fe―C)'s. ΔΔH_het(Fe―C)'s(1, 2) follow the Capto‐dative Principle. The detailed knowledge of the factors that determine the Fp―C bond strengths would greatly aid in understanding reactivity patterns in many processes. Copyright © 2011 John Wiley & Sons, Ltd.