Crystallographic study of the phase transition in (Me4P)2ZnBr4

The compound (Me₄P)₂ZnBr₄, a member of the β-K₂SO₄ structure class, undergoes a phase transition at 84°C from the room temperature space group P12₁/c1 to the parent Pmcn structure. The room temperature structure corresponds to a ferrodistortive transition of B_1g symmetry at the zone center. At room temperature, the compound has lattice constants a=9.501(1), b=16.055(2), c=13.127(2) Å and β=90.43(1)°. For the high temperature phase, the orthorhombic cell has dimensions a=9.466(2), b=16.351(3) and c=13.284(2) Å. The structures consist of two crystallographically independent Me₄P⁺ cations and the ZnBr₄²⁻ anions. In the room temperature phase, all three ionic species show substantial displacement from the mirror plane perpendicular to the a-axis that exists in the high temperature phase, as well as rotations out of that plane. The thermal parameters of the cations are indicative of substantial librational motion. Measurements of lattice parameters have been made at 2-5°C intervals over the temperature range 40-140°C. The changes in the lattice constants appear continuous at T_c (within experimental limits) indicating that the phase transition is likely second-order. The a lattice constant shows an anomalous shortening as T_c is approached. Thermal expansion coefficients are calculated from this data. An application of Landau theory is used to derive the temperature dependencies of spontaneous shear strain and corresponding elastic stiffness constants associated with the primary order parameter.     

Structure and high pressure behaviour of organic crystals based on aromatically substituted 1,3,4-oxadiazoles

The crystalline structure of a new compound containing the 1,3,4-oxadiazole moiety, 4-(5-methyl-1,3,4-oxadiazole-2yl-)-N,N′-dimethyl-phenylamine (MODPA) was determined. It shows a monoclinic structure with space group P2₁/c and lattice parameters: a=1.02997(6), b=0.64840(4), c=1.58117(10) nm and β=99.4820(10)°. To study the intermolecular interactions in oxadiazole containing organic crystals, X-ray studies on MODPA and 2,5-diphenyl-1,3,4-oxadiazole (DPO) were performed up to 5 GPa at room temperature. The Murnaghan equation of state is used to describe the compression behaviour of both substances. From these results, the bulk modulus and its pressure derivative were determined. The values obtained are: K₀=6.3 GPa and K′₀=6.8 for MODPA and K₀=7.3 GPa and K′₀=6.7 for DPO. Additionally, measurements under increasing temperature at ambient pressure were carried out to evaluate the thermal expansion coefficient: α=1.8×10⁻⁴ K⁻¹ for MODPA and α=1.9×10⁻⁴ K⁻¹ for DPO.     

Structure of the low-temperature phase of Rb3D(SeO4)2 by single-crystal neutron diffraction

Crystal structure of Rb₃D(SeO₄)₂ has been investigated at 25 K (below the transition temperature T_c=95.4 K) by single-crystal neutron diffraction. Accompanying the transition, the SeO₄ groups, which are all equivalent in the phase above the transition (space group A2/a), split into eight nonequivalent groups in a superlattice (a×2b×2c, space group A2) in the low-temperature phase. Based on the D atom positions obtained, each of the SeO₄ groups was identified to be in the state closer to a HSeO₄⁻ ion or to a SeO₄²⁻ ion and the dipole arrangement of SeO₄-D-SeO₄ dimer was revealed. This dipole arrangement has ‘ferri’ structure along the polar b-axis, but ‘antiferro’ structure in the plane perpendicular to the b-axis. These results are consistent with the characteristics found in the earlier dielectric measurements.     

Annealing temperature influence on electrical properties of ion beam sputtered Bi2Te3 thin films

Ion beam sputtering process was used to deposit n-type fine-grained Bi₂Te₃ thin films on BK7 glass substrates at room temperature. In order to enhance the thermoelectric properties, thin films are annealed at the temperatures ranging from 100 to 400 °C. X-ray diffraction (XRD) shows that the films have preferred orientations in the c-axis direction. It is confirmed that grain growth and crystallization along the c-axis are enhanced as the annealing temperature increased. However, broad impurity peaks related to some oxygen traces increase when the annealing temperature reached 400 °C. Thermoelectric properties of Bi₂Te₃ thin films were investigated at room temperature. The Bi₂Te₃ thin films, including as-deposited, exhibit the Seebeck coefficients of −90 to −168 μV K⁻¹ and the electrical conductivities of 3.92×10²-7.20×10² S cm⁻¹ after annealing. The Bi₂Te₃ film with a maximum power factor of 1.10×10⁻³ Wm⁻¹ K⁻² is achieved when annealed at 300 °C. As a result, both structural and transport properties have been found to be strongly affected by annealing treatment. It was considered that the annealing conditions reduce the number of potential scattering sites at grain boundaries and defects, thus improving the thermoelectric properties.     

EPR study of Cu(II) dopant ions in single crystals of bis(l-asparaginato)Zn(II)

We report an electron paramagnetic resonance (EPR) study at 33.9 GHz and room temperature of oriented single crystal samples of bis(l-asparaginato)Zn(II) doped with Cu(II). The variation of the spectra with magnetic field orientation was measured in three crystal planes (a*b, bc and a*c, with a*=b×c). These spectra display two groups of four peaks arising from the hyperfine interaction with the I_Cu=3/2 nuclear spins of copper. They were assigned to Cu(II) ions in two lattice sites related by a 180° rotation around the b-crystal axis. The g and hyperfine coupling (A) tensors of the Cu(II) ions were evaluated from the single crystal data. Some indeterminacy in the assignment of the signals was avoided measuring the EPR spectrum of a powder sample. Their principal values are g₁=2.060(1), g₂=2.068(2), g₃=2.283(2), and A₁≈0.1×10⁻⁴, A₂=13×10⁻⁴ and A₃=165×10⁻⁴ cm⁻¹. The eigenvectors corresponding to g₃ and A₃ are coincident within the experimental error; the other eigenvectors are rotated 5.6° in the perpendicular plane. Considering the crystal structure of bis(l-asparaginato)Zn(II), our EPR results indicate that the Cu(II) impurities replace Zn(II) ions in the host crystal. We propose a molecular model based on the EPR data and the structural information, and analyse the results comparing the measured values with those obtained in similar systems.     

An anomalous thermal expansion in the perovskite system,Gd1−xSrxMnO3 (0 ≤ x ≤ 0.3)

The thermal expansion behavior of sintered samples of Gd_1−xSr_xMnO₃ (X = 0.0–0.4) was studied. The sintered bodies in this system showed negative thermal expansion over a wide temperature range. The detailed crystal structure refinements with respect to temperature showed that the volume of the orthorhombic perovskite lattice monotonically increased with temperature, however, in addition to this, the release of distortion from the Jahn-Teller effect of Mn³⁺ ion occurred over a wide temperature range, which brought the negative expansion of the a-axis, although the b- and c-axes increased with temperature. The anomalous thermal expansion is explained by the sum of the effects of the shrinkage of the a-axis and absorption of the b- and c-axes' expansion by the pores in the sintered body.     

Structural, vibrational and dielectric properties of new potassium hydrogen sulfate arsenate: K4(SO4)(HSO4)2(H3AsO4)

A new compound, K₄(SO₄)(HSO₄)₂(H₃AsO₄) was synthesized from water solution of KHSO₄/K₃H(SO₄)₂/H₃AsO₄. This compound crystallizes in the triclinic system with space group P1¯ and cell parameters: a=8.9076(2) Å, b=10.1258(2) Å, c=10.6785(3) Å; α=72.5250(14)°, β=66.3990(13)°, γ=65.5159(13)°, V=792.74(3) Å³, Z=2 and ρ_cal=2.466 g cm⁻³. The refinement of 3760 observed reflections (I>2σ(I)) leads to R₁=0.0394 and wR₂=0.0755. The structure is characterized by SO₄²⁻, HSO₄⁻ and H₃AsO₄ tetrahedra connected by hydrogen bridge to form two types of dimer (H(16)S(3)O₄⁻?S(1)O₄²⁻ and H(12)S(2)O₄⁻?H₃AsO₄). These dimers are interconnected along the [1¯ 1 0] direction by the hydrogen bonds O(3)-H(3)?O(6). They are also linked by the hydrogen bridge assured by the hydrogen atoms H(2), H(3) and H(4) of the H₃AsO₄ group to build the chain S(1)O₄?H₃AsO₄ which are parallel to the “a” direction. The potassium cations are coordinated by eight oxygen atoms with K-O distance ranging from 2.678(2) to 3.354(2) Å.Crystals of K₄(SO₄)(HSO₄)₂(H₃AsO₄) undergo one endothermic peak at 436 K. This transition detected by differential scanning calorimetry (DSC) is also analyzed by dielectric and conductivity measurements using the impedance spectroscopy techniques. The obtained results show that this transition is protonic by nature.     

Synthesis and characterization of Co7(OH)12(C2H4S2O6)(H2O)2—a single crystal structural study of a ferrimagnetic layered cobalt hydroxide

A novel layered hydrotalcite-like material, Co₇(H₂O)₂(OH)₁₂(C₂H₄S₂O₆), has been prepared hydrothermally and the structure determined using single crystal X-ray diffraction (a=6.2752(19) Å, b=8.361(3) Å, c=9.642(3) Å, α=96.613(5)°, β=98.230(5)°, γ=100.673(5)°, R1=0.0551). The structure consists of brucite-like sheets where 1/6 of the octahedral sites are replaced by two tetrahedrally coordinated Co(II) above and below the plane of the layer. Ethanedisulfonate anions occupy the space between layers and provide charge balance for the positively charged layers. The compound is ferrimagnetic, with a Curie temperature of 33 K, Curie-Weiss θ of −31 K, and a coercive field of 881 Oe at 5 K.     

X-ray study of the thermal expansion anisotropy in the quarternary semiconductor CuGaSn□Se4

Accurate lattice parameters a and c of the tetragonal chalcopyrite quaternary semiconductor CuGaSn□Se₄ have been determined as a function of temperature by the X-ray powder diffraction method in the temperature range 300 K to about 900 K. The data have been used to evaluate the axial expansion coefficients α_a and α_c at various temperatures. The thermal expansion studies revealed the anisotropy between the axial expansion coefficients having a larger coefficient of expansion along the a-axis than that along the c-axis (α_a > α_c). The mean values α_a and α_c, in the temperature range 300–900 K, are found to be 14.02 × 10^-6K^-1 and 5.02 × 10^-6K^-1 respectively, and the axial ratio, c/a, changes with a coefficient of -8.96 × 10^-6K^-1. This result indicates an increase in the tetragonal distortion, δ = 2 - c/a with temperature. An attempt is made to explain the increase in tetragonal distortion with temperature and the anisotropic thermal expansion of CuGaSn□Se₄ in terms of the thermal expansion of the A>−;Se (where A is Cu and Ga randomly distributed) and B>−;Se (where B is Sn and vacancy randomly distributed) bonds. The results are also discussed in terms of the principal Grüneisen parameters of chalcopyrite structure compounds.     

Structure of a high temperature phase of potassium dideuteriophosphate (DKDP)

We previously determined the crystal structures of the high temperature phases of KH₂PO₄ [J.A. Subramony, S. Lovell, B. Kahr, Chem. Mater. 10 (1998) 2053. [6]]. These triclinic and monoclinic phases were obtained by heating the room temperature tetragonal form until new crystal phases were identified by polarization microscopy. These samples were subsequently cooled to room temperature thereby preserving the metastable high temperature phases for analysis. KD₂PO₄ is distinct from KH₂PO₄ in that it crystallizes at room temperature in a monoclinic phase unknown for its isotopomer, therefore the question as to whether it would support the corresponding high temperature phases remained open until our report here of the transformation of monoclinic KD₂PO₄ to an isomorphous triclinic high temperature phase: space group P with a=7.475(1) Å, b=7.440(1) Å, c=7.184(1) Å, α=88.53(1) Å, β=86.81(1)°, γ=88.09(1)°, V=398.58 Å³. This is the first known high temperature phase of DKDP, a material coveted at room temperature for its optical properties.     

High temperature thermoelectric properties of Nb-doped ZnO ceramics

Solid-state reaction processing technique was used to prepare Zn_xNb_1−xO (0≤x≤0.02) polycrystalline bulk samples. In the present study, we find that their lattice parameters a and c tend to decrease with increasing amount of Nb additive. The electrical conductivity of all the Zn_1−xNb_xO samples increased with increasing temperature, indicating a semiconducting behavior in the measured temperature range. The addition of Nb₂O₅ to ZnO led to an increase in the electrical conductivity and a decrease in the absolute value of the Seebeck coefficient. The best performance at 1000 K has been observed for nominal 0.5 at% Nb-doped ZnO, with an electrical resistivity of about 73.13 (S cm⁻¹) and Seebeck coefficient of ∼257.36 μV K⁻¹, corresponding to a power factor (S²σ) of 4.84×10⁻⁴ Wm⁻¹ K⁻². The thermal conductivity, κ, of the oxide decreased as compared to pure ZnO. The figure of merit ZT values of ZnO-doped Nb₂O₅ samples are higher than the ZnO pure sample, demonstrating that the Nb₂O₅ addition is fairly effective for enhancing thermoelectric properties.     

Electrical properties of SrBi2(Nb0.5Ta0.5)2O9 ceramics

Aurivillius SrBi₂(Nb_0.5Ta_0.5)₂O₉ (SBNT 50/50) ceramics were prepared using the conventional solid-state reaction method. Scanning electron microscopy was applied to investigate the grain structure. The XRD studies revealed an orthorhombic structure in the SBNT 50/50 with lattice parameters a=5.522 Å, b=5.511 Å and c=25.114 Å. The dielectric properties were determined by impedance spectroscopy measurements. A strong low frequency dielectric dispersion was found to exist in this material. Its occurrence was ascribed to the presence of ionized space charge carriers such as oxygen vacancies. The dielectric relaxation was defined on the basis of an equivalent circuit. The temperature dependence of various electrical properties was determined and discussed. The thermal activation energy for the grain electric conductivity was lower in the high temperature region (T>303.6 °C, E_a−ht=0.47 eV) and higher in the low temperature region (T<303.6 °C, E_a−lt=1.18 eV).     

Decoupling of the order-disorder and displacive contributions to the phase transition in NH4H(ClH2CCOO)2

The effects of hydrostatic pressure and substitution of Rb⁺for the ammonium cations on the ferroelectric phase transition temperature in NH₄H(ClH₂CCOO)₂ have been studied by electric permittivity measurements. The transition temperature (T_c) decreases with increasing pressure up to 800 MPa and the pressure coefficient dT_c/dp=−1.4×10⁻² [K/MPa] has been experimentally determined. The substitution of Rb⁺ for the ammonium cations has been shown to considerably lower the ferroelectric phase transition temperature T_c. In mixed crystals, additional electric permittivity anomaly has been clearly evidenced. The results are discussed assuming a model, which combines polarizability effects, related to the heavy ion units, with the pseudo-spin tunnelling.     

A new quasi-one-dimensional molecular solid based on Ni(mnt)2 anion: Crystal structure and spin-gap transition

A new molecular solid, [1-(4′-bromo-2′-fluorobenzyl)-4-dimetylaminopyridinium]-bis(maleonitriledithiolato)nickel(III), (BrFBzPyN(CH₃)₂(Ni(mnt)₂)(1), has been prepared and characterized by elemental analyses, IR, ESI-MS spectra, single crystal X-ray diffraction and magnetic measurements. Compound 1 crystallizes in the orthorhombic space group Pnma, a=20.579(4) Å, b=7.078(1) Å, c=17.942(4) Å, α=β=γ=90°, V=2613.3(9) Å³, Z=4. The Ni(III) ions of 1 form a quasi-one-dimensional Zigzag magnetic chain within a Ni(mnt)₂⁻ column through Ni?S, S?S, Ni?Ni, or π?π interactions with an Ni?Ni distance of 4.227 Å. Magnetic susceptibility measurements in the temperature range 2-300 K show that 1 exhibits a spin-gap transition around 200 K, and antiferromagnetic interaction in the high-temperature phase (HT) and spin gap in the low-temperature phase (LT). The transition for 1 is second-order phase transition as determined by DSC analyses.     

Structure and high-pressure behavior of 2,5-di-(4-aminophenyl)-1,3,4-oxadiazole

The crystalline structures of two modifications of a compound containing the oxadiazole ring, 2,5-di-(4-aminophenyl)-1,3,4-oxadiazole (DAPO) were determined. One of these modifications contains water molecules in the crystal structure, which is observed for the first time for an oxadiazole crystal. Both crystals show an orthorhombic structure. The water free modification, DAPO I, belongs to the space group Pbca (61) and has the lattice parameters: a=13.461(5), b=7.937(3) and c=22.816(8) Å (CCDC 246608). The water containing pseudo-polymorph, DAPO II, has the space group Cmcm (63) and the lattice parameters: a=16.330(5), b=12.307(2) and c=6.9978(14) Å (CCDC 246609). To gain information on the inter molecular interactions within the crystals, X-ray experiments under compression at ambient temperature and under heating at vacuum conditions were performed. Neither DAPO I nor DAPO II undergo phase transitions in the ressure range up to 5 GPa, as could be concluded from X-ray and Raman experiments. X-ray and calorimetric studies indicate that DAPO II dehydrates into DAPO I under increasing temperature. Structural considerations suggest a two-stage process. The compression behavior of both substances is well described by the Murnaghan equation of state (MEOS) and the values of the bulk modulus and its pressure derivative are determined for these crystals. Additionally, in the case of DAPO I, also the thermal expansion coefficient α₀ was measured.     

Structural and physical–chemical properties of the CuGa5Se8, CuGa3Se5 and CuIn3Se5 compounds

Large-block (8×4×3 mm³) CuGa₅Se₈ crystals were obtained by the horizontal Bridgman method. Homogeneous CuGa₃Se₅ and CuIn₃Se₅ single crystals 12 mm in diameter and up to 40 mm in length were grown by directed crystallization of the melt. All three compounds were found to have the chalcopyrite-related structure. The melting points of these compounds were defined by means of the differential thermal analysis. The lattice parameters a and c as well as the axial thermal expansion coefficients α_a and α_c were determined as a function of temperature in the range from 90 to 650 K by the X-ray diffraction method. It is revealed that for all three compounds the coefficients of expansion along the a-axis are larger than those along the c-axis over the entire temperature range studied.     

X-ray diffraction, Cs and H NMR and thermal studies of CdZrCs1.5(H3O)0.5(C2O4)4·xH2O displaying Cs and water dynamic behavior

A novel mixed cadmium zirconium cesium oxalate with an open architecture has been synthesized from precipitation methods at room pressure. It crystallizes with an hexagonal symmetry, space group P3₁12 (no. 151), a=9.105(5) Å, c=23.656(5) Å, V=1698(1) Å³ and Z=3. The structure displays a [CdZr(C₂O₄)₄]²⁻ helicoidal framework built from CdO₈ and ZrO₈ square-based antiprisms connected through bichelating oxalates, which generates channels along different directions. Cesium cations, hydronium ions and water molecules are located inside the voids of the anionic framework. They exhibit a dynamic disorder which has been further investigated by ¹H and ¹³³Cs solid-state NMR. Moreover a phase transition depending both upon ambient temperature and water vapor pressure was evidenced for the title compound. The thermal decomposition has been studied in situ by temperature-dependent X-ray diffraction and thermogravimetry. The final product is a mixture of cadmium oxide, zirconium oxide and cesium carbonate.     

Calorimetric and single crystal X-ray study of the phase transition of (PyH)2PdCl4

Polymorphic transition of pyridinium tetrachloropalladate(II) was investigated by heat capacity measurements and by single crystal X-ray structural analysis. A large λ-type anomaly was detected at 240 K in the temperature dependence of the heat capacity. The low-temperature phase (LTP) belongs to the triclinic space group with a=6.856(1), b=7.293(1), c=7.721(1) Å, α=75.180(2)°, β=71.081(2)°, γ=81.109(3)° at 100 K, and the high-temperature phase (HTP) to the same space group with a=7.217(2), b=7.470(2), c=7.880(2) Å, α=73.438(3)°, β=65.195(3)°, γ=82.727(4)° at 293 K. The pyridinium cations are ordered antiferroelectrically in LTP. In HTP, however, an orientational disorder of the cation was observed. The energy difference between potential wells for the reorientation of pyridinium ion in HTP is discussed referring to the results of the present single crystal X-ray and heat capacity as well as the previous ¹H NMR measurements. A five-site disorder model is shown to be consistent with both of the observations of ¹H NMR and X-ray study.     

Structural studies of Cr-doped mullite derived from single-phase precursors

Cr-doped mullites were prepared from single-phase precursors containing up to 9.60 wt% Cr₂O₃ using a sol-gel technique followed by thermal treatment. Particle induced X-ray emission spectroscopy and X-ray powder diffraction were used to characterize the samples. Mullites were orthorhombic, space group Pbam. Cr doping caused the increase of unit-cell parameters. Strongest expansion was noticed along c-axis followed by a and b (Δc/c=0.089, Δa/a=0.061, Δb/b=0.045% per mole Cr₂O₃). A second phase, namely θ-(Al,Cr)₂O₃, was revealed by XRD in the sample containing 9.60 wt% Cr₂O₃. The structure of mullites was refined by the Rietveld method, location of Cr³⁺ was performed by the EPR spectroscopy. At low chromium doping level (Cr₂O₃ content less than ∼5 wt%) Cr³⁺ ions were substituted for Al³⁺ in the AlO₆ octahedra of the mullite structure (M1 site). For higher doping level, Cr³⁺ ions were additionally substituted for Al³⁺ in the AlO₆ octahedra of the second phase [θ-(Al,Cr)₂O₃ at 1400 °C, or α-(Al,Cr)₂O₃ at 1600 °C] which segregated in the system. Substitution of Cr³⁺ for Al³⁺ on M1 site in the mullite structure resulted in increase of average distances in (M1)O₆ octahedron and decrease of average distances in T*O₄ tetrahedron, while average distances in TO₄ tetrahedron stayed almost constant.