Synthesis and electrochemical performances of Li4Ti4.95Al0.05O12/C as anode material for lithium-ion batteries

Spinel compounds Li₄Ti_5−xAl_xO₁₂/C (x=0, 0.05) were synthesized via solid state reaction in an Ar atmosphere, and the electrochemical properties were investigated by means of electronic conductivity, cyclic voltammetry, and charge-discharge tests at different discharge voltage ranges (0-2.5 V and 1-2.5 V). The results indicated that Al³⁺ doping of the compound did not affect the spinel structure but considerably improved the initial capacity and cycling performance, implying the spinel structure of Li₄Ti₅O₁₂ was more stable when Ti⁴⁺ was substituted by Al³⁺, and Al³⁺ doping was beneficial to the reversible intercalation and deintercalation of Li⁺. Al³⁺ doping improved the reversible capacity and cycling performance effectively especially when it was discharged to 0 V.     

Particle size distribution and electrochemical properties of LiFePO4 prepared by a freeze-drying method

The electrochemical performance of carbon-coated nanocrystalline LiFePO₄ prepared by a freeze-drying method is examined. This method is based on the thermal decomposition of homogeneous phosphate-formate precursors. Structural and morphological characterization of LiFePO₄ is carried out by powder XRD, BET measurements, SEM and XPS analyses. The electrochemical behaviour is tested in model lithium cells using galvanostatic mode. By changing the solution concentration, the freeze-drying method allows preparing LiFePO₄ with mean particle sizes between 60 and 100 nm and different particle size distributions. The content of carbon appearing mainly on the particle surface depends on both the solution concentration and the annealing temperature. The effect of particle size distribution on the voltage profile of LiFePO₄ is also demonstrated. The specific capacity is mainly determined by the amount of carbon deposited on the particle surfaces.     

Advanced electrochemical performance of LiMn1.4Cr0.2Ni0.4O4 as 5 V cathode material by citric-acid-assisted method

Spinel LiMn₂O₄ and LiMn_1.4Cr_0.2Ni_0.4O₄ cathode materials were successfully synthesized by the citric-acid-assisted sol-gel method with ultrasonic irradiation stirring. The structure and electrochemical performance of the as-prepared powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometer, cyclic voltamogram (CV) and the galvanostatic charge-discharge test in detail. XRD shows that all the samples have high phase purity, and the powders are well crystallized. SEM exhibits that LiMn_1.4Cr_0.2Ni_0.4O₄ has more uniform cubic-structure morphology than that of LiMn₂O₄. EDX reveals that a small amount of Mn³⁺ still exists in LiMn_1.4Cr_0.2Ni_0.4O₄. The galvanostatic charge-discharge test indicates that the initial discharge capacities for the LiMn_1.4Cr_0.2Ni_0.4O₄ and LiMn₂O₄ at 0.15 C discharge rates are 130.8 and 130.2 mAh g⁻¹, respectively. After 50 cycles, their capacity are 94.1% and 85.1%, respectively. The CV curve implies that Ni and Cr dual substitutions are beneficial to the reversible intercalation and deintercalation of Li⁺, and suppress Mn³⁺ generation at high temperatures and provide improved structural stability.     

Synthesis and characterization of MCM-41 decorated with CuO particles

CuO particles have decorated on the external surface of MCM-41 by in situ introducing cupric nitrate during the hydrothermal synthesis followed by the calcination. The textural and structural properties of CuO/MCM-41 are compared with those of pure MCM-41. The results show that CuO particles are about 40 nm in size and are not agglomerated. The addition of cupric nitrate to the synthesis gel leads to materials with somewhat reduced quality as evidenced from X-ray diffraction patterns and nitrogen adsorption measurements. CuO/MCM-41 is less ordered relative to pure MCM-41 and there are inter-aggregate pores resulting in a higher average pore diameter in the material. The formation of CuO particles on the external surface of MCM-41 and the possible reason for the less ordered structure of CuO/MCM-41 are also discussed in the present paper.     

Preparation and characterization of CuZnAl catalysts by citrate gel process

CuZnAl catalysts with different Cu loading (1-23 wt%) and a Zn:Al atomic ratio nearly constant (Zn:Al≅0.6), were prepared by the citrate sol-gel method and characterized by different techniques such as TG, BET, TPR, XRD and FTIR. The final structure obtained was strongly influenced by the calcination temperature and metal precursor composition. XRD and quantitative Rietveld revealed Zn and Al species were mainly incorporated into the normal spinel matrix and copper predominantly forms CuO. The formation of a ZnAl₂O₄ spinel was favored by increasing Cu amounts and/or by increasing calcination temperature (from 500° to 700 °C). The spinel phase of the catalysts calcined at 700 °C, had a good thermal stability and it was preserved after TPR measurements. Under hydrogen atmosphere Cu²⁺ was fully reduced to Cu⁰. Although the composition and the calcination temperature have a strong influence on the phase nature in CuZnAl catalysts, the reducibility of Cu species changes in a non significant way.     

Study on the electrochemical behavior of vanadium nitride as a promising supercapacitor material

Vanadium nitride (VN) powder was synthesized by calcining V₂O₅ xerogel in a furnace under an anhydrous NH₃ atmosphere at 400 °C. The structure and surface morphology of the obtained VN powder were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The supercapacitive behavior of VN in 1 M KOH electrolyte was studied by means of cyclic voltammetry (CV), constant current charge-discharge cycling (CD) and electrochemical impedance spectroscopy (EIS). The XRD result indicates that the obtained VN belongs to the cubic crystal system (Fm3m [2 2 5]) with unit-cell parameter 4.15 Å. SEM images show the homogeneous surface of the obtained VN. The CV diagrams illustrate the existence of fast and reversible redox reactions on the surface of VN electrode. The specific capacitance of VN is 161 F g⁻¹ at 30 mV s⁻¹. Furthermore, the specific capacitance remains 70% of the original value when the scan rate increases from 30 to 300 mV s⁻¹. CD experiments show that VN is suitable for CD at high current density, and the slow and irreversible faradic reactions exist during the charge-discharge process of the VN electrode. The experimental results indicate that VN is a promising electrode material for electrochemical supercapacitors.     

Preparation, characterization and electrochemical property of Sn-Fe-Mo-Al2O3 multi-phase composites

A novel technique has been developed to synthesize Sn-Fe-Mo-Al₂O₃, while nanoscale dispersion of a highly active tin phase was finely distributed in a stable inert multi-phase. The precursor was prepared by co-precipitation method with SnCl₄, FeCl₃, AlCl₃ and (NH₄)₆Mo₇O₂₄ as the raw materials. Sn-Fe-Mo-Al₂O₃ mixture was produced by reducing the precursor with H₂. The product was characterized by X-ray diffraction (XRD), ICP and scanning electron microscopy (SEM). The performance of the electrode was investigated. The Sn-Fe-Mo-Al₂O₃ electrode was found to have an initial charge capacity of over 461 mAh/g, and a reversible volumetric capacity of 2090 mAh/cm³, which is two times larger than that of graphite electrode (800 mAh/cm³). The coulomb efficiency in the first cycle was over 55%, but its cyclability was not improved significantly. In order to enhance the cycle performance, we investigated the anode after heat treated at 270 °C for 12 h. Under the same condition, the first charge-discharge characteristics were almost equivalent to the as-coated anode, and the retention capacity ratio after 20 cycles was improved from 41.1% to 86.5%. The heat-treated Sn-Fe-Mo-Al₂O₃ electrode exhibited better cycle life. The electrochemical reaction of the Sn-Fe-Mo-Al₂O₃ electrode with Li may obey the alloying-dealloying mechanism of Li_xSn(x?4.4) formation in the other tin-based electrodes.     

The first synthesis of a graphite bis(oxalato)borate intercalation compound

A new graphite intercalation compound containing the bis(oxalato)borate anion, B[OC(O)C(O)O]₂⁻, is prepared for the first time by chemical oxidation of graphite with fluorine gas in the presence of a solution containing the intercalate anion in anhydrous hydrofluoric acid. The products of stage 1-3 compounds are characterized by powder X-ray diffraction, thermogravimetric analysis, and elemental analyses. X-ray diffraction data indicate a standing-up orientation for the borate anion, with long axis perpendicular to the graphene sheets. Elemental analyses provide x and δ for the nominal composition of C_xB[OC(O)C(O)O]₂·δF, where the chelate borate and fluoride are co-intercalates, and indicate a low borate, and high fluoride, intercalate content as compared to anion packing in other graphite intercalation compounds.     

Preparation and characterization of NiFe2O4/NiO composite film via a single-source precursor route

NiFe₂O₄/NiO nanocomposite thin films have been successfully prepared through a facile route using nickel iron layered double hydroxide (NiFe-LDH) as a single-source precursor. This synthetic approach mainly involves the formation of NiFe-LDH film by casting the slurry of NiFe-LDH precursor on the α-Al₂O₃ substrate, followed by high-temperature calcination. The composition, microstructure and properties of the films were characterized in detail by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and vibrating sample magnetometer (VSM). The results indicate that NiFe₂O₄/NiO composite film was composed of granules with diameter less than 100 nm, and the thickness of the film was in the range 1-2 μm. The magnetization of the film can be tuned by alternating the Ni/Fe molar ratio of LDH precursor. In addition, the method developed should be easily extended to fabricate other MFe₂O₄/MO composite film systems with specific applications just by an appropriate combination of divalent/trivalent composition in the precursor of LDHs.     

Preparation and characterization of lithium niobate as a novel photocatalyst in hydrogen generation

Several chemical compounds based lithium niobate have been tested in the reaction for the photocatalytic hydrogen generation. The photocatalysts have been prepared by impregnation of Nb₂O₅ in the aqueous solution of lithium hydroxide and then the calcination at the temperature range of 400-650 °C. In this report, we present the interesting study showing that the most active catalyst for the photocatalytic generation of hydrogen is the one containing two lithium niobate phases such as LiNbO₃ and LiNb₃O₈. It means that the lithium niobates based catalyst without any further modification or doping can be applied as a novel material for this process.     

Sorption and decomposition of crude oil using exfoliated graphite/ZnO composites

Exfoliated graphite/ZnO composites (EG/ZnO) were prepared by impregnating expandable graphite with Zn(OH)₂, abruptly expanding at 700 °C for 40 s, and heating at 500 °C for 3 h. The composites were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), nitrogen adsorption and mercury porosimetry. The sorption capacity of the composites for spilled crude oil was measured and under UV irradiation the decomposition of the absorbed crude oil was investigated. The results showed that the composites provided with the adsorption and photocatalysis capacity for crude oil at the same time. The sorption capacity of the composites decreased gradually on increasing the ZnO content of the composites. Moreover, the decomposition ratio of the absorbed crude oil increased on increasing the ZnO content or decreasing the weight ratio of crude oil to composites.     

Controlled growth of Cu2S hexagonal microdisks and their optical properties

Chalcocite Cu₂S particles have been prepared hydro- and solvo-thermally from a copper plate in pure water, mixed solvents of water and ethylenediamine (en), and pure en, respectively. Their structural and optical properties have been characterized by a combination of powder X-ray diffraction, scanning and transmission electron microscopy (SEM and TEM), and VIS-NIR diffuse reflectance spectroscopy. Their growth and optical properties were found to be highly dependent on synthesis conditions and in particular the en/water volume ratio. For the first time, Cu₂S particles wish the shape of hexagonal microdisks were synthesized in a mild hydrothermal condition and these crystalline particles were found to exhibit unique optical properties.     

Deep desulfurization of model gasoline over photoirradiated titanium-pillared montmorillonite

The activity of Ti-pillared montmorillonite for photocatalytic oxidative desulfurization using 2,5-dimethylthiophene dissolved in n-octane as a model organosulfur compound in gasoline was investigated. Using Ti-pillared montmorillonite and an oil/acetonitrile two-phase extraction, deep desulfurization of sulfur-containing compounds was achieved. During this process, O₂ was used as the oxygen source and photoirradiation was achieved by UV light. Using this approach, 97.4% of the sulfur compounds were oxidized and successfully removed from the model gasoline system under mild reaction conditions. Montmorillonite was prepared by sol–gel method and characterized by XRD, N₂ absorption and UV–vis spectroscopy. The characterization indicates that Ti component enters the interlayer of montmorillonite, working as an active component in the crystal phase of anatase. Deep desulfurization experiments show that the activity of Ti-pillared montmorillonite is obviously better than P25.     

Ni-Al layered double hydroxides modified with citrate, malate, and tartrate: Preparation by coprecipitation and uptake of Cu from aqueous solution

We report on aqueous Cu²⁺ uptake by Ni-Al layered double hydroxides (Ni-Al LDHs) modified with citrate (C₆H₅O₇³⁻), malate (C₄H₄O₅²⁻), and tartrate (C₄H₄O₆²⁻) anions via coprecipitation. Dropwise addition of a mixed aqueous solution of Ni(NO₃)₂ and Al(NO₃)₃ to the respective organic acid solutions at a constant pH of 7.0-9.0 afforded LDHs with intercalated C₆H₅O₇³⁻ and Ni(C₆H₅O₇⁾⁻, C₄H₄O₅²⁻, and C₄H₄O₆²⁻ in their interlayers. The anions were also likely adsorbed on the LDH surface. Citrate·Ni-Al LDH could rapidly take up Cu²⁺ at a constant pH of 5.0, mainly via chelation by the intercalated and adsorbed anions, rather than coprecipitation with dissolved Al³⁺ to form Cu-Al LDH. By contrast, malate and tartrate were not active as chelating agents, probably because they formed bridges between brucite-like layers by direct coordination of the two −COO⁻ groups with Al³⁺ in those layers.     

Synthesis and crystallographic studies of garnet-type AgCa2Mn2V3O12 and NaPb2Mn2V3O12

High-purity powder specimens of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ have been successfully synthesized by solid-state chemical reaction. The Rietveld refinements from X-ray powder diffraction data verified that these compounds have the garnet-type structure (space group , No. 230) with the lattice constant of a=12.596(2) Å for AgCa₂Mn₂V₃O₁₂ and a=12.876(2) Å for NaPb₂Mn₂V₃O₁₂. Calculation of the bond valence sum supported that Mn is divalent and V is pentavalent in these garnets. Estimation of the quadratic elongation and the bond angle variance showed that the distortions of the MnO₆ octahedra and the VO₄ tetrahedra are significantly suppressed. Our new results of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ are compared to those of AgCa₂M₂V₃O₁₂ and NaPb₂M₂V₃O₁₂ (M=Mg, Co, Ni, Zn).     

Sorption study of an anionic dye - benzopurpurine 4B - on calcined and uncalcined Mg-Al layered double hydroxides

In this paper, the elimination from aqueous solution of the pollutant benzopurpurine 4B by Mg-Al-CO₃ hydrotalcite and its modified form Mg-Al-500 has been studied. Mg-Al-CO₃²⁻ layered double hydroxide with an Mg/Al molar ratio of 2.0 was synthesized by the co-precipitation method, and its modification was carried out by calcination. The affinity of these materials with a mixture of benzopurpurine 4B was studied as a function of dye-adsorbent contact time, initial pH of the solution, initial dye concentration and temperature. The results indicate that HDLs were effective in removing benzopurpurine 4B anionic dye. Their saturated adsorption capacities are very high, particularly for the calcined material Mg-Al-500 compared to the standard one Mg-Al-CO₃²⁻.The characterisation of the solid Mg-Al-500, both fresh and after removal of the dye by X-ray diffraction and infrared spectroscopy, shows that the benzopurpurine 4B adsorption on this calcined phase is enhanced by reconstruction of a matrix hydrotalcite intercalated by the dye, with basal spacing of 23.77 Å, which is larger than that of Mg-Al-CO₃²⁻ LDHs (7.57 Å).     

Structural, sorption and thermodynamic correlations from a layered barium phenylarsonate/n-alkyldiamine system

The barium phenylarsonate compound, Ba(HO₃AsC₆H₅)₂·2H₂O, has the ability to intercalate n-alkyldiamine molecules, H₂N(CH₂)_nNH₂ (n=2-5). The amount intercalated (n_f) from a batchwise procedure and the variation of the original basal distance (d) of 1245 ppm determined through X-ray diffractions, gave linear correlations as a function of the number of carbon atoms in the aliphatic chain (n_c): n_f=(2.66±0.06)−(0.13±0.02)n_c and d=(2168±65)+(114±14)n_c. The intercalation process was calorimetrically followed to give exothermic enthalpy and negative Gibbs energy, reflecting spontaneous intercalation reactions at the solid/liquid interface. The displacement of solvent molecules bonded to amine and of those on the matrix during the intercalation increases the disorder to result in positive entropy, giving a favorable set of thermodynamic data for this system.     

Intermediate-temperature polymorphic phase transition in KH2PO4: A synchrotron X-ray diffraction study

We have used synchrotron X-ray diffraction to investigate the structural and chemical changes undergone by polycrystalline KH₂PO₄ (KDP) upon heating within the 30-250 °C temperature interval. Our data show evidence of a polymorphic transition at T∼190 °C from the room-temperature tetragonal KDP phase to a new intermediate-temperature monoclinic KDP modification (spacegroup P2₁/m and lattice parameters a=7.590, b=6.209, c=4.530 Å, and β=107.36°). The monoclinic RDP polymorph remains stable upon further heating to 235 °C, and is isomorphic to its RbH₂PO₄ and CsH₂PO₄ counterparts.