A study of the long-term strength of repair bandages made of composite rings of unidirectional structure

The interference stress relaxation in a composite repair bandage formed on a cylindrical metal surface was studied. The creep of a repair ring bandage under the action of interference stresses was evaluated. The results of the calculation of the creep and the interference stress relaxation of a composite ring on a sample made of a segment of a metal pipe in time are presented.     

Effect of form of reagent on particle sizes of precipitates

The particle size of an ionic precipitate is much smaller when one of the reactants is introduced as a solid rather than as a solution The effect is enhanced as the particle size of the solid reagent is decreased. The presence of a freshly dissolved inert electrolyte also influences the particle size of a precipitate The affects are not attributable merely to the degree of supersaturation but rather to the provision by the freshly dissolved material of sites upon which nucleation can be induced.     

Study of the mechanism of formation of transparent polyacrylonitrile

The kinetics of bulk polymerization of acrylonitrile, leading to a transparent polymer, was studied. The reaction was followed by a dilatometer specially designed for high degrees of conversion and for continuous supply of monomer during the reaction. The last stages of polymerization were followed by density determinations. It was found that the kinetic scheme did not show any irregularities, and that the major condition for obtaining a transparent polymer is a continuous supply of monomer to fill up the gaps formed by the contraction during the polymerization process.     

An expedient synthesis of the repeating unit of the acidic polysaccharide of the bacteriolytic complex of lysoamidase

The first synthesis of the trisaccharide repeating unit of the acidic polysaccharide of the bacteriolytic complex of lysoamidase is presented. The construction is based on a linear glycosylation strategy that starts from the reducing end and employs thio- and selenoglycosides in a highly stereoselective manner by a single set of activation conditions. The thus-formed trisaccharide is selectively deprotected and oxidised, after which a final deprotection step furnishes the desired repeating unit.     

Chemical modification of the surface of a sulfonated membrane by formation of a sulfonamide bond

This paper describes a novel approach for the surface modification of a cation-exchange membrane, bearing sulfonate groups, by a cationic layer. The modification procedure involved the chlorosulfonation of the sulfonate groups of the base membrane with thionyl chloride, followed by a reaction with a diamine to yield a sulfonamide bond and a terminal amine. The latter could be quaternized by reaction with methyl iodide or protonated by soaking in acidic media. The membranes were characterized in detail by attenuated total reflectance Fourier transform infrared and X-ray photoelectron spectroscopies as well as elemental analysis to confirm that the above reactions occurred. The selectivity of these membranes toward the electrochemically assisted transport of protons versus Zn2+ metallic cations was determined during an electrodialysis in a two-compartment electrochemical cell. The data indicate a significant decrease of the transport of the metallic cations following modification of the membrane with the cationic layer. The later allows for the transport of protons from the catholyte to the anolyte compartment with much improved selectivity since the divalent cations are excluded from the membrane due to the electrostatic barrier of the cationic layer.     

Study of the mechanism of the photoisomerization and photooxidation of bilirubin using a model for the phototherapy of hyperbilirubinemia

Liquid chromatography was employed for a study of photochemical degradation of bilirubin in the complex with human albumin, using a model system in the presence of riboflavin. The concentrations of bilirubin, the photoisomers and biliverdin were monitored. The reaction mechanism was verified using a quantified mathematical model and was represented by a reaction scheme. Photoisomerization is the initial process, followed by photooxidation to degradation products of the tetrapyrrole skeleton, with formation of biliverdin as an intermediate. The blood of newborns that were irradiated for treatment of hyperbilirubinemia was studied for the sake of comparison. The effect of some biochemically important substances was followed, in view of possible inhibition of the processes. The experimental results demonstrate that riboflavin acts as a catalyst, even at the concentrations typical for its occurrence in blood. The results are discussed from the point of view of the mechanism of bilirubin degradation during phototherapy.     

Correction of pH of diluted solutions of electrolytes by electrodialysis with bipolar membranes

The current efficiencies of the water dissociation water and the voltage-current characteristics of the bipolar (asymmetric bipolar) membranes were measured in a two-chamber electrochemical cell. The cell was formed of an MB-3 bipolar membrane or an asymmetric bipolar membrane, which is an MA-40 heterogeneous membrane with a thin surface layer in the form of a cation-selective homogeneous film and MA-40 and MA-41 heterogeneous monopolar membranes. The dissociation of water on MA-40 in 0.01 M sodium chloride decreased the current efficiency of the acid and alkali both in the channel with a bipolar membrane and in the channel with an asymmetric bipolar membrane. The effective ion transport numbers across MA-40 and MA-41 at different pH values were determined. The water dissociation rate on MA-40 decreased at pH > 9.5. A kinetic model of the electrodialysis of a dilute solution of sodium chloride in a two-chamber unit cell with a bipolar and anionite membranes was suggested.     

Secondary Distribution of Current during the Deposition of Metals and a Measure of Throwing Power of Electrolytes

The throwing power of electrolytes can be determined to a sufficient accuracy with the aid of a two-section cathode in a standard modeling cell. The result can be used for computing local current densities in a real cell, provided the primary current distribution is known.     

Chemical methods of dispergation of metallic phases

The results of a cycle of works on the chemical dispergation of intermetallic compounds and alloys were summarized and analyzed. The chemical dispergation occurs in a hydrogen or ammonia atmosphere in the temperature range from 20 to 500 °C and a pressure of 0.5–2.0 MPa. The phase transformations were studied. The conditions suitable for the production of polymetallic phase powders of various degrees of dispersity were determined.     

Kinetics of the solution polymerization of dioxolane in the presence of water

Water acts as a cocatalyst in the polymerization of dioxolane initiated by the ion pair ～Si^⊕HSO₄^?. The dependence of the reaction rate on the water concentration exhibits a maximum, the width of which strongly depends on the concentration of dioxolane. The change of the coordinates of the maximum and its shape with the decrease of the monomer concentration causes the reaction rate to decrease with increasing conversion. The point at which the slope of the conversion curve changes is a function of initial concentration of water. There is a very fast decrease of the concentration of free water in the polymerizing system. The consumption of water is associated with some peculiarities. The amount of free water which remains in the system is a function of the concentration of the original initiator. The ratio [H₂O]_∞/[initiator] is constant over a rather broad range of initial concentration of water.     

Heats of Mixing of Mixed Solvent Solutions of Alkali Metal Salts of Substituted Benzenesulfonic Acids

The enthalpy change on mixing solutions of methyl-substituted benzenesulfonic acids and their salts, with salts having a common cation or anion, at constant ionic strength in mixtures of 1,4-dioxane with water, were measured at 25°C. The heat effects of mixing solutions having a common anion increase almost linearly with the reciprocal value of the dielectric constant of the solvent. The heat effects of mixing solutions having a common cation, which are all negative in water-rich solutions, become endothermic after a certain value of the dielectric constant is passed. The results are discussed in terms of the solute-solvent structural properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

New Algorithm of Spectral Analysis of Elements in Presence of Matrix Interferences

Abstract

This work suggests a new algorithm for the elemental analysis, which permits taking into account both the multiplicative and additive matrix effects, a matrix composition being unknown. The use of this algorithm in the development of analysis techniques at any set of objects may appear to be successful at arbitrarily selected measurement conditions. The basis of the algorithm consists of a combination of pattern recognition and standard addition technique (PRSA). The main concept of PRSA is to predict a function approximating satisfactorily a calibration dependence for a specific object and then to determine an unknown concentration using a nonlinear addition technique, all the aforementioned being based on easily obtained information on an analyzed object and measurement conditions. The abilities of the proposed algorithm were demonstrated by the example of strontium determination by the flame atomic absorption spectrometry in superconducting systems.     

Determination of phosphate based on inhibition of crystal growth of calcite

The growth of calcium carbonate seed crystals (calcite) is strongly inhibited by the presence of phosphate ions. The kinetics of crystal growth were followed potentiometrically using a calcium ion-selective electrode or through the use of a pH electrode. The study of different variables on such a process was carried out with the aim of developing kinetic methods to determine phosphate ions (50–400 ng ml^?1). The selectivity and sensitivity of these processes allow the application of crystallization reactions to the determination of phosphate in human urine.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Kinetics of heterogeneous free-radical polymerization of vinylidene chloride

Poly(vinylidene chloride) precipitates as a crystalline phase during the polymerization reaction. Under the conditions studied, this phase is made up of complex particles with a lamellar substructure. The detailed morphology is very sensitive to reaction medium. The morphology developed by particles formed during polymerization of vinylidene chloride in dioxane suggests a mechanism of polymerization followed by crystallization. The morphology observed in mass polymerization suggests that both processes occurs simultaneously. Kinetic data, however, suggest a solid-phase reaction mechanism for both cases. The results are analyzed by comparison with a model that takes into account the solid-phase morphology. The theoretical analysis is consistent with experimental results if it is assumed that polymerization occurs on the edges of the lamellar crystals.     

C60笼内内陷粒子的运动

研究C60笼内内陷粒子的量力力学运动, 导出运动能量与波函数, 以内陷CO分子为例做了计算, 解释了分子对微波的吸收现象。     

Study of cryostructurization of polymer systems

The influence of freezing of a reaction mass on the properties of the resulting covalently cross-linked gels is exemplified by a system composed of a solution of chitosan in aqueous acetic acid and glutaric dialdehyde serving as a cross-linking agent. The freezing is shown to lead to a noticeable decrease of critical concentration of gelation as compared with the reactions of polymeric chain cross-linking in ordinary conditions. Consideration is given to some properties of three-dimensional networks obtained by cryostructurization.     

Optimization of parameters of a system for continuous activation analysis of liquids

Mathematical considerations on the optimization of the flow and mechanical parameters of a system for continuous analysis of liquids are presented. The system in question contains a pump, an activation vessel placed in the vicinity of a neutron generator target, a pipeline and a vessel for the measurement of the induced activity. The following parameters of the system were taken into consideration: volumes of the activation and measurement vessels, position of the activation vessel with respect to the neutron generator target, shape of the activation vessel, and flow rate of the pumped fluid. The system is adapted for continuous and interrupted mode of operation of the neutron generator. The results of the theoretical considerations were verified in practice with the use of the above system and the reaction¹⁶O (n, p)¹⁶N. The agreement of theory and experiment was proved.     

Temperature and concentration dependence of the activity of quinones of presumed inhibiting action

The inhibiting properties of a series of organic compounds with a quinonoid structure have been electrochemically studied. The effect of the area and the structure of the organic molecule on the activity of the quinones has been followed. The compounds studied inhibit mild steel's corrosion in model cooling water and prove to be inhibitors of a cathodic type. The degree of corrosion inhibition is a function of the temperature, the concentration and the nature of the substance. The protective effect of the quinones is explained with their adsorption on the corroding surface. The adsorption itself is facilitated by the presence of π-electron systems and conjugated bonds in the molecules as well as by the increase of the molecule's size. Some differences in the behaviour of the p- and o-compounds studied are observed.     

Improvement of Properties of Pseudomonas sp. Lipase in Resolution of 2-Octanol

IntroductionThe demand for the high purity of chiral com-pounds has led to the increasing use of biocatalystsand the increasing research in order to obtain en-zymes with a higher activity and selectivity.In thisfield the utilization of lipases has been proved to beone of the simplest but most promising techniquesfor the enantioselective conversion of various hy-drophobic acids and alcohols in the last decade.There has been a considerable interestin improvingthe enantioselectivity of lipases an…