表面活性剂在非极性有机溶剂中的自组装

本文总结了表面活性剂在非极性有机溶剂中复杂反相聚集的研究进展。首先突破了表面活性剂在非极性溶剂(油)中溶解的难题,通过设计合成大头基的新表面活性剂,或引入合适添加剂使之与表面活性剂头基相互作用,由此增大头基有效尺寸,这些均能有效促进表面活性剂形成核-壳完整的聚集体,进而带动表面活性剂分散(溶解)在非极性溶剂中。基于聚集体带动溶解的思路,建立了制备表面活性剂/油均相溶液的直接溶解方法,讨论了制备方法的关键要素,它比文献常用的甲醇预溶解法方便且有效。列举了若干典型的表面活性剂/环己烷均相体系,以此评述了聚集体带动溶解的方法,也展现了丰富多样的反相聚集形貌,讨论了表面活性剂头基尺寸对聚集结构的影响。     

1,5-二(2-羟基-5-氯苯基)-3-氰基甲■与非离子表面活性剂的相互作用

通过测定表面活性剂对HCPCF吸收光谱及溶解度的影响,研究了HCPCF与表面活性剂之间的作用机理。在酸性介质中表面活性剂主要起胶束增溶作用。根据HCPCF在不同极性溶剂中的吸收光谱确定,分子形态的HCPCF是处于表面活性剂胶束的憎水碳氢链部分。在碱性介质中,在CMC以下,非离子表面活性剂可以单分子形式与HCPCF及其金属络合物形成具有一定组成比的化合物,此化合物的溶解度与非离子表面活性剂的结构有关。非离子表面活性剂可能是由其聚乙氧基的氧原子和HCPCF的尚未离解的氢之间形成氢键而反应。     

离子液体参与构筑的微乳液:离子液微乳液

微乳液一般是指两种互不相溶的液体(极性相:一般为水;非极性相:一般为有机溶剂),在表面活性剂作用下形成的均一透明的热力学稳定体系,已广泛应用于材料制备、化学合成等领域.离子液体是熔点低于100℃,完全由离子组成的一类物质,作为一种"绿色溶剂",具有诸多优异的物理化学性质,又被称为"可设计型溶剂".本文综述了离子液体作为极性相、非极性相,甚至表面活性剂,构筑的一类微乳液――离子液微乳液,重点介绍了其物理化学性质的研究进展,并展望了发展趋势.     

混合表面活性剂在非极性溶剂中的聚集行为

表面活性剂在非极性溶剂中的聚集行为比在水溶液中复杂得多. 水溶液中表面活性剂有一明确的临界胶束浓度(CMC),而在非极性溶剂中至今对CM C概念仍有怀疑^[1], 但已有多种手段如染料增溶法、水增溶法、光散射法、荧光偏振、紫外和核磁共振谱等证实并测定了非极性溶剂中 CMC 的存在^[1～5]. 表面活性剂在非极性溶剂中以非离子化状态存在, 其缔合主要靠两亲分子之间的偶极-偶极以及离子对相互作用, 那么在一种表面活性剂溶液中加入另一种表面活性剂, 即表面活性剂的复配, 必然对其聚集行为产生重大影响, 但迄今为止, 尚未见关于混合表面活性剂在非极性溶剂中聚集行为的报道. 本文采用碘光谱法和水增溶法测定了阴离子表面活性剂AOT 和非离子表面活性剂 Brij30 混合后在正庚烷中形成反胶束的 CMC, 以期考察表面活性剂的复配对其聚集行为的影响。     

核磁共振法研究全氟羧酸铵在非水介质中的胶束化

离子型表面活性剂在水中和在非极性溶剂中的胶束化已成为许多研究的课题。离子型表面活性剂在水中,或在具有两个氢键的极性溶剂中(如乙二醇、氨基醇)形成普通胶束,其结构是分子的疏水端聚集在     

m-6-m型Gemini双季铵盐表面活性剂与DNA的相互作用

合成了5种m-6-m型Gemini双季铵盐表面活性剂,在对产物结构和表面活性进行分析的基础上,分别采用紫外分光光度法和荧光分光光度法考察了m-6-m型Gemini双季铵盐表面活性剂与DNA的相互作用.结果表明,m-6-m型Gemini表面活性剂的CMC随烷基疏水链的增长呈逐渐下降趋势.几种表面活性剂均没有使DNA的紫外吸收峰发生红移或蓝移现象,说明复合物无嵌插作用或氢键形成,表面活性剂与DNA作用后的吸光度随表面活性剂浓度的增大而增强,当表面活性剂的浓度相同时,吸光度随疏水链的增大而逐渐减弱.Gemini表面活性剂浓度增大导致荧光强度降低,表面活性剂与DNA作用时的猝灭为静态猝灭,随着疏水链长度的增长,荧光猝灭常数降低,表面活性剂与DNA之间的作用力减弱.     

电解质水溶液在丙酸十二铵-四氯化碳溶液中的增溶

表面活性剂在非极性溶剂中形成的反胶束在催化反应、光化学、蛋白质苹取分离等方面有着广泛的应用问．这些应用与反胶束的性质有着密切的关系，而增溶水后的反胶束其形状和大小都会发生很大的变化．增溶不同水量的反胶束的微极性、酸碱性、微勤度等已有不少文献报导［2－5］．一些不溶于非极性溶剂而溶于水的物质可以溶解在非极性溶剂中的反胶束核心水团中，这个现象被称为二次增溶．其中，电解质的二次增溶对于研究配体转换反应。酶催化反应问及改变反胶束内部的微环境有着十分重要的作用，Aebi和Weibush回首先研究了有水存在时N。CI在A…     

嵌段共聚物反介观液晶相新方法合成多级有序排列的二氧化硅纳米棒

在非极性溶剂体系中,开辟了利用反相液晶法制备多级有序纳米材料的新方法.利用嵌段共聚物表面活性剂在非极性溶剂中形成反相胶束,无机硅物种可以进入胶束的内部,在溶剂挥发后,有机-无机物种进一步组装成为反相六方液晶相.除去模板剂后即制备出尺寸规则的二氧化硅纳米棒材料.由于嵌段高分子的作用,六方排列的二氧化硅纳米棒进一步排列成层状结构(层间距约150nm).通过选择表面活性剂及改变其浓度,纳米棒的尺寸可以在9～15nm范围内调变.该反应途径对于合成其它尺寸均一、多级有序排列的纳米棒材料是非常有意义的.     

正、负离子表面活性剂凝胶化正丁醇

利用正、负离子表面活性剂混合体系月桂酸钠/十六烷基三甲基溴化铵(SL/CTAB)成功实现了正丁醇的凝胶化, 并借助流变仪、扫描电子显微镜(SEM)研究了该凝胶的流变性质和微观形貌. 实验发现, 正、负离子表面活性剂的浓度及混合比例对正丁醇凝胶的形成具有较大影响, 只有在合适的浓度和混合比例下正丁醇才能被有效地凝胶化. 在正丁醇能够形成凝胶的前提下, 固定正、负离子表面活性剂混合体系中某一组分的浓度, 体系的粘度随着另一组分浓度的增加而增大. 流变结果表明该凝胶具有剪切变稀的非牛顿流体特性. 微观形貌的研究表明所形成的凝胶具有典型的三维网络结构, 厚度相对均一的带状纤维是组成网络的结构单元. 进一步的研究表明, 正、负离子表面活性剂碳氢链的疏溶剂作用、极性头基间的静电吸引作用、表面活性剂与正丁醇分子间的氢键作用对凝胶的形成起到重要的作用.     

正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

Organic high ionic strength aqueous two-phase solvent system series for separation of ultra-polar compounds by spiral high-speed counter-current chromatography

Existing two-phase solvent systems for high-speed countercurrent chromatography cover the separation of hydrophobic to moderately polar compounds, but often fail to provide suitable partition coefficient values for highly polar compounds, such as sulfonic acids, catecholamines and zwitter ions. The present paper introduces a new solvent series which can be applied for the separation of these polar compounds. It is composed of 1-butanol, ethanol, saturated ammonium sulfate and water at various volume ratios and consists of a series of 10 steps which are arranged according to the polarity of the solvent system so that the two-phase solvent system with suitable K values for the target compound(s) can be found in a few steps. Each solvent system gives proper volume ratio and high density difference between the two phases to provide a satisfactory level of retention of the stationary phase in the spiral column assembly. The method is validated by partition coefficient measurement of four typical polar compounds including methyl green (basic dye), tartrazine (sulfonic acid), tyrosine (zwitter ion) and epinephrine (a catecholamine), all of which show low partition coefficient values in the polar 1-butanol-water system. The capability of the method is demonstrated by separation of three catecholamines.     

Direct alkylation of carboxylic in aqueous samples

Summary Carboxylic acids can be converted to their methyl esters in an aqueous sample which contains no organic solvent. The reaction appears to be assisted by the presence of a quaternary ammonium salt surfactant. The procedure is best described as a pseudo-organic phase, or micelle-like, reaction. The important experimental variables have been optimized by Simplex procedures. The reaction proceeds in 80–100% yield, for common carboxylic acids, at room temperature in less than one hour. This reaction is superior to existing two-phase extractive alkylation procedures.     

Micellar Solubilization of Proteins in Aprotic Solvents and their Spectroscopic Characterisation

The quaternary ammonium salt methyl-trioctylammonium chloride enables the transfer of α-chymotrypsin, trypsin, pepsin and glucagone from water to cyclohexane. Reversed micelles, whose polar core solubilizes both protein and water, are probably formed in the apolar phase. The influence of various parameters on the phase transfer (concentration, pH, solvent, temperature, etc.) has been investigated. Absorption, fluorescence and circular dichroism studies of the biopolymers in the cyclohexane system have been carried out. For trypsin and chymotrypsin, the CD. signal in the 200 nm region is very similar in water and in cyclohexane, which suggests that the polypeptide folding is not substantially different in the two phases. The fluorescence quantum yield is always much larger in the cyclohexane phase than in water. The longer wavelength region of the UV. absorption spectrum is slightly red-shifted relative to water, and a band at 225 nm, probably arising from the aromatic chromophore, is apparent in the organic phase. Reasons for these spectral perturbations are discussed. The enzymes transferred from water into cyclohexane phases can be continuously retransferred into a second water phase. The possible relevance of this ‘double transfer’ as a model for the vectorial transport of biopolymers or a separation technique is discussed.     

SDS对SB3-12胶束表面电荷密度的调控作用及对药物增溶的影响

两性离子甜菜碱表面活性剂(SB3-12)胶束具有较好的生物相容性,由于相反电荷的极性头之间具有静电中和作用,胶束表面具有小的负电荷密度。当加入阴离子的十二烷基硫酸钠(SDS)以后,负离子SD-与SB3-12胶束极性区内层季铵正电荷的静电中和作用,能连续地调节胶束表面磺酸基的负电荷密度,这有利于对药物分子的选择性增溶和调节在生理条件下的药物的输送。等温滴定量热(ITC)研究发现SB3-12和SDS有强的协同效应,混合临界胶束浓度(CMC)和胶束化焓明显降低,并得到两者协同效应的弱静电作用机理。当模型药物分子芦丁(Rutin)与SB3-12/SDS混合胶束作用时,芦丁7位羟基的氢解离后的阴离子与SDS共同作用于SB3-12形成混合胶束。UV-Vis吸收光谱和~1H NMR谱研究发现,在SB3-12胶束中,芦丁分子的A环位于季铵阳离子附近,B环位于两个相反电荷之间的弱极性区域。在SDS胶束中,B环位于栅栏层,而A环和二糖暴露于水相侧。在混合胶束中,随着SDS摩尔分数增加,对A环的静电吸引变弱。离子表面活性剂对两性离子表面活性剂胶束表面电荷密度的调节作用,本质上是对胶束极性区域的物理及化学性质的微调,进而实现对药物的可控增溶。     

质谱法分析季铵盐型阳离子表面活性剂

以电子轰击质谱法(EI/MS)与电喷雾质谱法(ESI/MS)相结合,分析季铵盐型表面活性剂。由于阳离子表面活性剂在水溶液中离解成正离子,可用电喷雾质谱的正离子模式(ESI /MS)对其结构及组成进行鉴定,同时可判别季铵盐所含的Cl-、Br-、NO3-等阴离子。     

Polymerisation of liquid crystalline phases in binary surfactant/water systems

The binary phase behaviour of two potentially polymerisable quaternary ammonium surfactants in water has been investigated. Allyldodecyldimethylammonium bromide (ADAB) a single-chain surfactant displays a conventional phase progression upon increasing concentration. Whereas the doublechain analogue allyldidodecylmethylammonium bromide (ADDAB) forms two lamellar liquid crystalline phases built from surfactant bilayers, which transform via a first order phase transition. The formation of two distinct lamellar phases and their coexistence has been evidenced by optical microscopy, small-angle x-ray scattering and D₂O deuterium quadrupolar nuclear magnetic resonance spectroscopy. The lamellar phase formed at higher surfactant compositions is a normal lamellar phase (typeL ) consisting of bilayers which are on average parallel and flat. The lower compositional lamellar phase (typeL ) in contrast may not be comprised of planar bilayers but rather aggregates having a high degree of curvature in comparison to those of theL phase. The presence of the allyl polymerisable moiety in the head group position of these surfactants has the effect of reducing the rigidity of the surfactant and increasing its solubility in comparison to nonpolymerisable analogues. Polymerisation of the surfactants was attempted by using thermal and photochemical initiation in isotropic and self-assembled systems. Polymerisation occurred to approximately 30% for DADB but did not occur for ADDAB. Where polymerisation did occur the polymer was incorporated into the monomer matrix by interweaving between the surfactant aggregates. The polymers had a molecular wieght not greater than 8000 Daltons, independent of the monomer concentration of the original solution and type of polymerisation.     

Chromatographic retention behaviour, modelling and separation optimisation of the quaternary ammonium salt isometamidium chloride and related compounds on a range of reversed-phase liquid chromatographic stationary phases

This paper describes the reversed-phase liquid chromatographic behaviour of the trypanocidal quaternary ammonium salt isometamidium chloride and its related compounds on a range of liquid chromatographic phases possessing alkyl and phenyl ligands on the same inert silica. In a parallel study with various extended polar selectivity phases which possessed different hydrophobic/silanophilic (hydrogen bonding) activity ratios, the chromatographic retention/selectivities of the quaternary ammonium salts was shown to be due to a co-operative mechanism between hydrophobic and silanophilic interactions. The highly aromatic and planar isometamidium compounds were found to be substantially retained on stationary phases containing aromatic functionality via strong π-π interactions. The chemometric approach of principal component analysis was used to characterise the chromatographic behaviour of the isometamidium compounds on the differing phases and to help identify the dominant retention mechanism(s). Two-dimensional (temperature/gradient) retention modelling was employed to develop and optimise a rapid liquid chromatography method for the separation of the six quaternary ammonium salts within 2.5 min which would be suitable for bioanalysis using liquid chromatography-mass spectrometry. This is the first reported systematic study of the relationship between stationary phase chemistries and retention/selectivity for a group of quaternary ammonium salts.     

非极性毛细管电色谱原位柱的阳离子表面活性剂动态修饰

毛细管电色谱是在毛细管中依靠电渗流来驱动流动相 ,同时溶质与固定相发生相互作用的一种色谱分离模式 ,它有高效液相色谱的高选择性 ,同时兼具毛细管电泳的高效性 [1] .传统电色谱柱是将HPLC填料装入毛细管 ,但由于装柱困难且易产生气泡而在一定程度上阻碍了电色谱的发展 [2～ 4 ] .通过柱内合成的方法直接在毛细管中制成连续床毛细管电色谱柱 ,可避免两端烧塞 . 1 995年 Svec等 [5,6]首次将连续床层色谱柱用于毛细管电色谱 ,此后 ,有关毛细管中原位合成连续床电色谱柱的方法得到了应用 [7～ 11] .为了使原位合成电色谱柱能产生电渗流 ,…     

Chemical synthesis and crystallization of the dipeptide AcPheIleNH(2) in TTAB/heptane/octanol reversed micelles

The chemical synthesis of the dipeptide acetyl phenyl iso-leucin-amide (AcPheIleNH(2)) in tetradecyl trimethyl ammonium bromide (TTAB)/ heptane/octanol/carbonate buffer reversed micelles is described. The co-existence of the surfactant bounded minute water pools within the bulk organic solvent enables the simultaneous solubilization of the polar (IleNH(2)) and apolar (AcPheOEt) substrates, thus enabling the synthesis to take place at the micellar interface. The synthesis was favored by increasing the micellar interface via an increase in water content and surfactant concentration. The best dipeptide yield (87%) was obtained at 32 degrees C, with the largest concentrations of TTAB (200 mM) and water (1100 mM) tested. The low solubility of the dipeptide in the micellar media further led to the formation and growth of needle-like crystals during synthesis, thus enabling the removal of product from solution.