Recent developments in manufacturing emulsions and particulate products using membranes

Membrane emulsification (ME) is a relatively new technique for the highly controlled production of particulates. This review focuses on the recent developments in this area, ranging from the production of simple oil-in-water (O/W) or water-in-oil (W/O) emulsions to multiple emulsions of different types, solid-in-oil-in-water (S/O/W) dispersions, coherent solids (silica particles, solid lipid microspheres, solder metal powder) and structured solids (solid lipid microcarriers, gel microbeads, polymeric microspheres, core-shell microcapsules and hollow polymeric microparticles). Other emerging technologies that extend the capabilities into different membrane materials and operation methods (such as rotating membranes, repeated membrane extrusion of coarsely pre-emulsified feeds) are introduced. The results of experimental work carried out by cited researchers in the field together with those of the current authors are presented in a tabular form in a rigorous and systematic manner. These demonstrate a wide range of products that can be manufactured using different membrane approaches. Opportunities for creation of new and novel entities are highlighted for low throughput applications (medical diagnostics, healthcare) and for large-scale productions (consumer and personal products).     

Wavelength-ratiometric near-physiological pH sensors based on 6-aminoquinolinium boronic acid probes

We describe the pH response of a set of isomeric water-soluble fluorescent probes based on both the 6-aminoquinolinium and boronic acid moieties. These probes show spectral shifts and intensity changes with pH, in a wavelength-ratiometric and colorimetric manner. Subsequently, changes in pH can readily be determined around the physiological level.Although boronic acid containing probes are known to exhibit pH sensitivity along with an ability for saccharide binding/chelating, the new probes reported here are considered to be unique and show an unperturbed pH response, even in the presence of high concentrations of background saccharide, such as with glucose and fructose, allowing for the predominant pH sensitivity. The response of the probes is based on the ability of the boronic acid group to interact with strong bases like OH⁻, changing from the neutral form of the boronic acid group, R-B(OH)₂, to the anionic ester, R-B⁻(OH)₃, form, which is an electron donating group. The presence of an electron deficient quaternary heterocyclic nitrogen center and a strong electron donating amino group in the 6-position of the quinolinium backbone, provides for the spectral changes observed upon OH⁻ complexation. In addition, by comparing the results obtained with systems separately incorporating 6-methoxy or 6-methyl substituents, the suppressed response towards monosaccharides, such as with glucose and fructose, can clearly be observed for these systems. Finally we compare our results to those of a control compound, BAQ, which does not contain the boronic acid group, allowing a rationale of the spectral changes to be made.     

Oxidative status of human low density lipoprotein isolated by anion-exchange high-performance liquid chromatography--assessment by total hydroxyoctadecadienoic acid, 7-hydroxycholesterol, and 8-iso-prostaglandin F(2alpha)

This study aims to measure the oxidative status of LDL from human plasma (n=26) as assessed by biomarkers for lipid peroxidation, total hydroxyoctadecadienoic acid (tHODE), 7alpha- and 7beta-hydroxycholesterol (t7-OHCh), and 8-iso-prostaglandin F(2alpha) (t8-iso-PGF(2alpha)) after subfractionation of LDL with an anion-exchange HPLC (AE-HPLC). LDL was separated and quantified by AE-HPLC as LDL-1, LDL-2, and LDL-3 in the order of the anionic charge of the LDL particles. The concentrations of tHODE, t7-OHCh, and t8-iso-PGF(2alpha) in both plasma and LDL subfractions were assessed after reduction and saponification. In this method, the free and ester forms of hydroperoxides, ketones, and hydroxides of linoleic acid and cholesterol are measured as tHODE and t7-OHCh, respectively. It was found that tHODE significantly correlated with the proportion of LDL-2 and LDL-3 as well as with the concentration of malondialdehyde-modified LDL in plasma. Further, by the analyses of LDL subfractions, the concentrations of tHODE, t8-iso-PGF(2alpha), and t7-OHCh in LDL-3 were found to be significantly higher than those in LDL-1 and LDL-2. These results clearly indicate that the extent of oxidation increases in the order of LDL-1相似文献   

Synthesis and biocompatibility of a novel silicone hydrogel containing phosphorylcholine

A novel poly (methyl methacrylate-co-2-methacryloyloxyethyl phosphorylcholine-co-tris(trimethylsiloxy)-3-methacryloxypropylsilane) terpolymer (PMMT) was synthesized and the anti-biofouling properties were studied in order to evaluate the potential of this silicone hydrogel to be used as contact lens material. The chemical structure was characterized by IR, ¹H-NMR and elemental analysis. Poly methyl methacrylate (PMMA) and poly (methyl methacrylate-co-tris (trimethylsiloxy)-3-methacryloxypropylsilane) (PMT) were also synthesized to compare with PMMT. Protein adsorption measurement showed that for PMMT-2 membrane (MPC: 16.6 mol%), the amount of adsorbed proteins was decreased by 75.3% and 76.8% compared with PMMA and PMT membranes, respectively. SEM pictures showed clearly that PMMT films suppressed the adhesion of platelets. Water structure in polymers was determined by differential scanning calorimetry, and PMMT-2 possessed more freezing water content than PMMT-1 (MPC: 14.5 mol%). The equilibrium water content of PMMT-2 membrane reached 55%, which might offer comfortable wear feeling, and the introduction of MPC increased the wettability of the polymer surface dramatically. Both the terpolymers PMMT-1 and PMMT-2 exhibited high transparency (relatively constant at approximately 96%) in the visible light wave range. Moreover, oxygen transmissibility (Dk/t) of the terpolymers met the requirement for a lens to be worn safely overnight. It could be concluded that the novel silicone hydrogel containing MPC unit was an effective candidate material for making biomaterials, particularly for contact lenses.     

Conducting polymers in chemical sensors and arrays

The review covers main applications of conducting polymers in chemical sensors and biosensors. The first part is focused on intrinsic and induced receptor properties of conducting polymers, such as pH sensitivity, sensitivity to inorganic ions and organic molecules as well as sensitivity to gases. Induced receptor properties can be also formed by molecularly imprinted polymerization or by immobilization of biological receptors. Immobilization strategies are reviewed in the second part. The third part is focused on applications of conducting polymers as transducers and includes usual optical (fluorescence, SPR, etc.) and electrical (conductometric, amperometric, potentiometric, etc.) transducing techniques as well as organic chemosensitive semiconductor devices. An assembly of stable sensing structures requires strong binding of conducting polymers to solid supports. These aspects are discussed in the next part. Finally, an application of combinatorial synthesis and high-throughput analysis to the development and optimization of sensing materials is described.     

Review on gel polymer electrolytes for lithium batteries

This paper reviews the state-of-art of polymer electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. This review mainly encompasses on five polymer hosts namely poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF) and poly(vinylidene fluoride-hexafluoro propylene) (PVdF-HFP) as electrolytes. Also the ionic conductivity, morphology, porosity and cycling behavior of PVdF-HFP membranes prepared by phase inversion technique with different non-solvents have been presented. The cycling behavior of LiMn₂O₄/polymer electrolyte (PE)/Li cells is also described.     

The stereoselective synthesis of (Z)-HFCCFZnI and stereospecific preparation of (E)-1,2-difluorostyrenes from (Z)-HFCCFZnI via an unusual Pd(PPh3)4-Cu(I)Br co-catalysis approach or (Z)-HFCCFSnBu3

(Z)-HFCCFZnI was stereoselectively synthesized from activated zinc dust and (Z)-HFCCFI that was synthesized from chlorotrifluoroethene in a sequential manner. Compared to (E)-HFCCFZnI, (Z)-HFCCFZnI was more challenging to prepare in terms of sluggish metallation and formation of by-products, and underwent slower and incomplete Negishi coupling with aryl iodides. In a modification of Negishi coupling, (E)-α,β-difluorostyrenes were stereospecifically prepared in good to excellent yields under mild conditions from aryl iodides and (Z)-HFCCFZnI with the co-catalysis of Pd(PPh₃)₄/Cu(I)Br. Experimental investigation and mechanistic rationalization suggested that Cu(I)Br would be a scavenger of free ligands for the facilitation of Pd(PPh₃)₂ formation, and a supplier of ligand for the metathesis process. Alternatively, (Z)-HFCCFSnBu₃ and aryl iodides with an electron-withdrawing group underwent Stille-Liebiskind coupling to afford (E)-α,β-difluorostyrenes.     

Effects of particle size on the electrochemical performances of a layered double hydroxide, [Ni<Subscript>4</Subscript>Al(OH)<Subscript>10</Subscript>]NO<Subscript>3</Subscript>

In this paper, the electrochemical performances of a layered double hydroxide, [Ni₄Al(OH)₁₀]NO₃, of different particle sizes are studied. The results show that the particle size of the sample has evident effects on its discharge capacity at high current density, although a larger capacity may be observed for the bigger particles when they are discharged at lower current densities, e.g. 0.2 A g⁻¹. However, the capacity decreases more quickly than that of the sample in smaller particle size when the current density increases. For example, the discharge capacity of the smallest particle remains as high as 180 mAh·g⁻¹ even at very high current density, e.g. 4.0 A g⁻¹. The results also show that long time soaked electrodes in 7 mol l⁻¹ KOH have improved performance, especially for the hydrothermal samples. It also seems that there is an optimal size for materials, which can maintain their performance for longer time.     

Direct atomic absorption spectrometry determination of tin, lead, cadmium and zinc in high-purity graphite with flame furnace atomizer

This work described methodology of Sn, Pb, Cd and Zn impurities determination in high-purity graphite at direct atomic absorption spectrometry (AAS) with flame furnace (FF) atomizer. It was evidence that quality of AAS measurements are depended from sample amount, its homogeneity, particle size, as well as calibration procedure and operation parameters of FF atomizer. Prior to analysis the method has been developed and optimized with respect to the furnace heating temperature and flame composition of FF atomizer. Conditions of absorption peak areas (Q_A) formation to each element were studied on the basis of contribution into its value some of individual parameters of analytes, including mass-transporting process from increasing mass of graphite samples into gas phase. Because particle size and homogeneous distribution of analyte in powdered materials has an enormous influence on accuracy and precision of measurement results, graphite as well as appropriate series of powdered reference standards was previously ground and investigated. Graphite samples to be analyzed and standard reference materials with mass from 0.025 to 0.200 g was previously briquetted as pellet and insert on corresponding hole in furnace. The characteristic mass (g₀) of Sn, Pb, Cd and Zn were 0.35, 0.1, 0.008 and 0.025 ng, respectively, and relative standard deviation (S_r) not more than 20%.     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

Fluorescence intensity and lifetime-based cyanide sensitive probes for physiological safeguard

We characterize six new fluorescent probes that show both intensity and lifetime changes in the presence of free uncomplexed aqueous cyanide, allowing for fluorescence based cyanide sensing up to physiological safeguard levels, i.e. <30 μM. One of the probes, m-BMQBA, shows a ≈15-fold reduction in intensity and a ≈10% change in mean lifetime at this level.The response of the new probes is based on their ability to bind the cyanide anion through a boronic acid functional group, changing from the neutral form of the boronic acid group R-B(OH)₂ to the anionic R-B⁻(CN)₃ form, a new cyanide binding mechanism which we have recently reported. The presence of an electron deficient quaternary heterocyclic nitrogen nucleus, and the electron rich cyanide bound form, provides for the intensity changes observed. We have determined the disassociation constants of the probes to be in the range ≈15-84 μM³. In addition we have synthesized control compounds which do not contain the boronic acid moiety, allowing for a rationale of the cyanide responses between the probe isomers to be made.The lifetime of the cyanide bound probes are significantly shorter than the free R-B(OH)₂ probe forms, providing for the opportunity of lifetime based cyanide sensing up to physiologically lethal levels.Finally, while fluorescent probes containing the boronic acid moiety have earned a well-deserved reputation for monosaccharide sensing, we show that strong bases such as CN⁻ and OH⁻ preferentially bind as compared to glucose, enabling the potential use of these probes for cyanide safeguard and determination in physiological fluids, especially given that physiologies do not experience any notable changes in pH.     

Vibrational spectra and structural parameters of some XNCO and XOCN (X = H, F, Cl, Br) molecules

Ab initio calculations with full electron correlation by the perturbation method to second order and hybrid density functional theory calculations by the B3LYP method utilizing the 6-31G(d), 6-311+G(d, p), and 6-311+G(2d, 2p) basis sets have been carried out for the XNCO and XOCN (X = H, F, Cl, Br) molecules. From these calculations, force constants, vibrational frequencies, infrared intensities, Raman activities, depolarization ratios, and structural parameters have been determined and compared to the experimental quantities when available. By combining previously reported rotational constants for HNCO, ClNCO and BrNCO with the ab initio MP2/6-311+G(d, p) predicted structural values, adjusted r₀ parameters have been obtained. The r₀ values for BrNCO are: r(BrN) = 1.857(5); r(NC) = 1.228(5); r(CO) = 1.161(5) Å; BrNC = 117.5(5) and NCO = 172.3(5)°. For ClNCO the determined r₀ parameters are in excellent agreement with the previously determine r_s values, whereas those for HNCO the HNC angle is larger with a value of 126.3(5)° compared to the previous reported value of 123.9(17)°. However, considering the relatively large uncertainty in the value given initially the two results are in near agreement. Structural parameters are also estimated for FNCO and XOCN (X = H, F, Cl, Br). The centrifugal distortion constants have been calculated and are compared to the experimentally (XNCO: X = H, Cl, Br) determined values. Predicted values for the barriers of linearity are given for both the XNCO (X = H, F, Cl, Br) molecules and the results were compared to the corresponding isothiocyanate molecules. The predicted frequencies for the fundamentals of the XNCO molecules compare favorably to the experimental values but some of the predicted intensities differ significantly from those in the observed spectra. The two OCN bends for HOCN have been assigned and the frequencies for the two corresponding fundamentals of DOCN are predicted.     

2′-Lipid-modified oligonucleotides via a ‘Staudinger-Vilarrasa’ reaction

We report a new access to 2′-amido-2′-deoxyuridine via a Staudinger-Vilarrasa coupling reaction for the preparation of lipid-modified oligonucleotides. One or two lipidic moieties were inserted within the oligonucleotidic sequence (LONs) leading to a repertoire of original antagomir-like molecules targeting micro RNA (miRNA or miR). Melting temperature (Tm) experiments revealed that the stability of the duplexes depends on the lipid position and the number of lipid moieties inserted within the oligonucleotide sequence. Single lipid conjugations of positions 11 and 19 of LONs targeting miR-122 do not destabilize the duplexes.     

Characterisation and determination of fullerenes: A critical review

A prominent sector of nanotechnology is occupied by a class of carbon-based nanoparticles known as fullerenes. Fullerene particle size and shape impact in how easily these particles are transported into and throughout the environment and living tissues. Currently, there is a lack of adequate methodology for their size and shape characterisation, identification and quantitative detection in environmental and biological samples. The most commonly used methods for their size measurements (aggregation, size distribution, shape, etc.), the effect of sampling and sample treatment on these characteristics and the analytical methods proposed for their determination in complex matrices are discussed in this review. For the characterisation and analysis of fullerenes in real samples, different analytical techniques including microscopy, spectroscopy, flow field-flow fractionation, electrophoresis, light scattering, liquid chromatography and mass spectrometry have been reported. The existing limitations and knowledge gaps in the use of these techniques are discussed and the necessity to hyphenate complementary ones for the accurate characterisation, identification and quantitation of these nanoparticles is highlighted.     

Synthesis of nanosized chitosan-poly(acrylic acid) particles by a dropping method

Deoxyribonucleic acid (DNA) vaccines are being investigated extensively because of their excellent potential over conventional protein ones. A suitable DNA carrier, consisting of uniformly dispersed chitosan-poly(acrylic acid) particles with an average size of 30 nm, was successfully synthesized by a dropping method with a ratio of chitosan solution to poly(acrylic acid) solution of 1:1 and was incubated in a buffer solution with a pH value of 3.0. The particle size increased from 35.76 to 45.90 nm when the pH value of the buffer solution was increased from 3.0 to 7.4. After freeze-drying, the non-incubated mixed solution showed a membranous morphology. A powdered product was formed from the mixed solution as incubated in buffer solution with pH values of 3.0 and 5.3. However, when the mixed solution was incubated in a buffer solution of pH 7.4, a mixture of membrane and powder was obtained.     

Preparation and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>composite particles

Using Fe₃O₄ nano-particles as seeds, a new type of Fe₃O₄/Au composite particles with core/shell structure and diameter of about 170 nm was prepared by reduction of Au³⁺ with hydroxylamine in an aqueous solution. Particle size analyzer and transmission electron microscope were used to analyze the size distribution and microstructure of the particles in different conditions. The result showed that the magnetically responsive property and suspension stability of Fe₃O₄ seeds as well as reduction conditions of Au³⁺to Au⁰are the main factors which are crucial for obtaining a colloid of the Fe₃O₄/Au composite particles with uniform particle dispersion, excellent stability, homogeneity in particle sizes, and effective response to an external magnet in aqueous suspension solutions. UV-Vis analysis revealed that there is a characteristic peak of Fe₃O₄/Au fluid. For particles with d(0.5)=168 nm, the λmax is 625 nm.     

Capillary zone electrophoresis and capillary electrophoresis-mass spectrometry for analyzing qualitative and quantitative variations in therapeutic albumin

The present study describes a reproducible and quantitative capillary zone electrophoresis (CZE) method, which leads to the separation of nine forms (native, oxidized and glycated) of human serum albumin (HSA). In an attempt to identify the different species separated by this CZE method, the capillary electrophoresis was coupled to mass spectrometry using a sheath liquid interface, an optimized capillary coating and a suitable CE running buffer. CE-MS analyses confirmed the heterogeneity of albumin preparation and revealed new truncated and modified forms such as Advanced Glycation End products (AGEs). Assignment of the CZE peaks was carried out using specific antibodies, carboxypeptidase A or sample reduction before or during the CE separation. Thus, five HSA forms were unambiguously identified. Using this CZE method several albumin batches produced by slightly different fractionation ways could be discriminated. Furthermore, analyses of HSA preparations marketed by five pharmaceutical industries revealed that two therapeutic albumins, including that marketed by LFB, contained the highest proportion of native form and lower levels of oxidized forms.     

核壳型Fe_3O_4/Au粒子的制备及其在表面等离子体子共振传感器中的应用

合成了核壳型Fe3O4/Au复合粒子,并对其形貌、光学性质进行了表征.通过外加磁场将Fe3O4/Au复合粒子与兔抗人IgG的偶联体固定于表面等离子体子共振(SPR)传感器的金基底膜上,形成了Fe3O4/Au/抗IgG敏感膜.与传统的通过巯基丙酸连接蛋白的方式相比,磁场作用固定的Fe3O4/Au/抗IgG敏感膜制备简单,易洗脱,具有良好的再生性,且在一定程度上提高了传感器的灵敏度.并对人IgG进行了测定,结果表明,传感器对于浓度范围在1.25～20.00μg·mL-1的人IgG有良好的信号响应.     

Rapid LC-MS detection of cyanobacterial hepatotoxins microcystins and nodularins—Comparison of columns

Eight reversed-phase columns intended for rapid HPLC were assessed for the separation of thirteen microcystins and nodularins, cyclic peptidic hepatotoxins. The instrumentation consisted of an Agilent Technologies 1200 Rapid Resolution high performance liquid chromatography system coupled to a mass spectrometer, Bruker Daltonics Ultra Performance High Capacity Ion Trap MS (HCT Ultra) with electrospray ionisation (RRLC-ESI-IT-MS). The columns tested were 2-2.1 mm × 50 mm in diameter and length, and contained small particles (1.8-2.7 μm), or monolithic silica supports for fast performance. The shortest total run time achieved was 3 min 15 s including equilibration and injection. Critical microcystin pairs were still resolved. Several columns showed excellent performance.     

Palladium-catalyzed trans-selective alkynylation-alkylation tandem process for the synthesis of (E)-3-alkyl-1-trialkylsilyl-3-alken-1-ynes

The Pd-catalyzed trans-selective monoalkynylation of 1,1-dihalo-1-alkenes with XZnCCSiMe₃, where X is Br or Cl, can proceed generally in excellent yields in the presence of Pd(DPEphos)Cl₂ or Pd(dppf)Cl₂, and subsequent alkylation with methyl- and ethylzincs can proceed in excellent yields with ≥98% retention of configuration in the presence of Pd(^tBu₃P)₂ as a catalyst.