Thermodynamic and structural characterization of a mixed perfluorocarbon-phospholipid ternary monolayer surfactant system

Pulmonary lung surfactant is a mixture of surfactants that reduces surface tension during respiration. Perfluorinated surfactants have potential applications for artificial lung surfactant formulations, but the interactions that exist between these compounds and phospholipids in surfactant monolayer mixtures are poorly understood. We report here, for the first time, a detailed thermodynamic and structural characterization of a minimal pulmonary lung surfactant model system that is based on a ternary phospholipid-perfluorocarbon mixture. Langmuir and Langmuir-Blodgett monolayers of binary and ternary mixtures of the surfactants 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) and perfluorooctadecanoic acid (C18F) have been studied in terms of miscibility, elasticity and film structure. The extent of surfactant miscibility and elasticity has been evaluated via Gibbs excess free energies of mixing and isothermal compressibilities. Film structure has been studied by a combination of atomic force microscopy and fluorescence microscopy. Combined thermodynamic and microscopy data indicate that the ternary monolayer films were fully miscible, with the mixed films being more stable than their pure individual components alone, and that film compressibility is minimally improved by the addition of perfluorocarbons to the phospholipids. The importance of these results is discussed in context of these mixtures' potential applications in pulmonary lung surfactant formulations.     

New protocols for preparing dipalmitoylphosphatidylcholine dispersions and controlling surface tension and competitive adsorption with albumin at the air/aqueous interface

The adsorption behavior of dipalmitoylphosphatidylcholine (DPPC), which is the major component of lung surfactant, at the air/aqueous interface and the competitive adsorption with bovine serum albumin (BSA) were studied with tensiometry, infrared reflection absorption spectroscopy (IRRAS), and ellipsometry. Dynamic surface tensions lower than 1 mN/m were observed for DPPC dispersions, with mostly vesicles, prepared with new protocols, involving extensive sonication above 50 °C. The lipid adsorbs faster and more extensively for DPPC dispersions with vesicles than with liposomes. For DPPC dispersions by a certain preparation procedure at T > T_c, when lipid particles were observed on the surface, dynamic surface tensions as low as 1 mN/m were measured. Moreover, IRRAS intensities and ellipsometric δΔ values were found to be much higher than the values for other DPPC dispersions or spread DPPC monolayers, suggesting that a larger amount of liposomes or vesicles adsorb on the surface. For DPPC/BSA mixtures, the tension behavior is controlled primarily by BSA, which prevents the formation of a dense DPPC monolayer. When BSA is injected into the subphase with a spread DPPC monolayer or into a DPPC dispersion with preadsorbed layers, little or no BSA adsorbs and the DPPC layer remains on the surface. When a DPPC monolayer is spread on a BSA solution at 0.1 wt% at 25 °C, then DPPC lipid can displace the adsorbed BSA molecules. The lack of BSA adsorption, and the expulsion of BSA by DPPC monolayer is probably due to the strong hydrophilicity of the lipid polar headgroup. When a DPPC dispersion is introduced with Trurnit's method or when dispersion drops are sprayed onto the surface of a DPPC/BSA mixture, the surface tension becomes lower and is controlled by DPPC, which can prevent the adsorption of BSA. The results may be important in understanding inhibition of lung surfactants by serum proteins and in designing efficient protocols of surfactant preparation and administration.     

Surface Dynamic Elasticity of Poly(ethylene oxide) Monolayers on a Water Surface

The methods of transverse and longitudinal surface waves and of oscillating barrier were used to measure a surface dynamic elasticity of poly(ethylene oxide) films spread on aqueous substrate within the frequency range of 0.001–520 Hz. Unlike the adsorption films, the main relaxation processes in the spread poly(ethylene oxide) films are observed at higher frequencies. A comparison of static and dynamic values of the surface elasticity shows that the surface film at surface polymer concentrations higher than 0.4 mg/m² cannot be considered already as purely two-dimensional film. It was found that the surface tension (surface pressure) can be insufficiently sensitive to conformational transformations in the surface polymer films.     

Influence of interfacial rheology on foam and emulsion properties

Foams and emulsions are stabilized by surfactant monolayers that adsorb at the air-water and oil-water interfaces, respectively. As a result of monolayer adsorption, the interfaces become viscoelastic. We will describe experiments showing that foaming, emulsification, foam and emulsion stability, are strongly dependent upon the value of compression elasticity and viscosity. This will include excited surface wave devices for the measurement of surface viscoelasticity and thin film videointerferometry for the study of model films between air bubbles and emulsion drops.     

Study on Foaming Properties and Dynamic Surface Tension of Sodium Branched-alkyl Benzene Sulfonates

Foaming properties and the dynamic surface tension (DST) were carried out with aqueous solutions of sodium branched-alkyl benzene sulfonates to elucidate the relationship between foaming properties and surfactant structures. The parameters of the DST (t*, n, R _1/2 ) are correlated with the foaming ability for alkyl benzene sulfonates with benzene ring substituting at positions 2, 4, and 8 of hexadecane. The parameters of the DST (t*, n, R _1/2 ) are correlated with the foaming ability of the same surfactant solutions. The results indicated that the molecular diffusion in the solution, adsorption, and arrangement at the air/water interface were changed with different molecular structures: changing the substituted position of benzene ring from 2 to 8 of hexadecane, the value of t* and n decrease, and the value of R _1/2 increases, which lead to the high dynamic surface activity and high foam volume. The foam stability is correlated with the high surface dilational elasticity and the strength of surface monolayer: changing the substituted position of benzene ring from 2 to 8 of hexadecane, the branched-alkyl chain becomes more flexible, which is characterized by densely packed adsorbed molecules and high film elasticity of the adsorption film. Therefore, the foam stability increases.     

On the low surface tension of lung surfactant

Natural lung surfactant contains less than 40% disaturated phospholipids, mainly dipalmitoylphosphatidylcholine (DPPC). The mechanism by which lung surfactant achieves very low near-zero surface tensions, well below its equilibrium value, is not fully understood. To date, the low surface tension of lung surfactant is usually explained by a squeeze-out model which predicts that upon film compression non-DPPC components are gradually excluded from the air-water interface into a surface-associated surfactant reservoir. However, detailed experimental evidence of the squeeze-out within the physiologically relevant high surface pressure range is still lacking. In the present work, we studied four animal-derived clinical surfactant preparations, including Survanta, Curosurf, Infasurf, and BLES. By comparing compression isotherms and lateral structures of these surfactant films obtained by atomic force microscopy within the physiologically relevant high surface pressure range, we have derived an updated squeeze-out model. Our model suggests that the squeeze-out originates from fluid phases of a phase-separated monolayer. The squeeze-out process follows a nucleation-growth model and only occurs within a narrow surface pressure range around the equilibrium spreading pressure of lung surfactant. After the squeeze-out, three-dimensional nuclei stop growing, thereby resulting in a DPPC-enriched interfacial monolayer to reduce the air-water surface tension to very low values.     

Adsorption of insoluble surfactants at the Au(111)/solution interface

The adsorption of surfactants, which form insoluble monolayers on an aqueous substrate, onto a single crystal gold electrode have been described. Adsorption of this class of surfactants have been characterized using a combination of electrochemistry and Langmuir-Blodgett techniques. We have developed a technique to simultaneously measure the film pressure at the gas-solution (GS) interface and the film pressure of the surfactants that spread to the metal-solution (MS) interface. We have shown that surfactants such as octadecanol and stearic acid, which interact weakly with the metal surface, adsorb at an uncharged MS interface (at the potential of zero charge) and progressively desorb when the electrode surface is charged negatively. The electrode potential (charge density at the metal surface) influences the transfer of the surfactant from the GS interface to the MS interface. The transfer ratio is 1:1 at an uncharged MS interface, and is progressively reduced to zero when the MS interface is charged. We have employed 12-(9-anthroloxy) stearic acid, a surfactant dye molecule, to study the mechanism of potential induced desorption and adsorption of the film of insoluble molecules. With the help of electroreflectance spectroscopy and light scattering measurements, we have shown that if desorbed, the surfactant molecules form micelles (flakes or vesicles) that are trapped under the electrode surface. The micelles spontaneously spread back onto the electrode surface when the charge density at the metal approaches zero. The repeatable desorption and readsorption involve micellisation of the film at negative potentials and spontaneous spreading of the micelles to reform the monolayer at potentials close to pzc.     

Real-time investigation of lung surfactant respreading with surface vibrational spectroscopy

The respreading of a lung surfactant monolayer at the air-water interface is investigated with broad bandwidth sum frequency generation (BBSFG) spectroscopy. The lung surfactant mixture contains chain perdeuterated dipalmitoylphosphatidylcholine (DPPC-d62), palmitoyloleoylphosphatidylglycerol (POPG), palmitic acid (PA), and KL4 (a 21-residue polypeptide analogue to the surfactant protein SP-B). DPPC-d62 serves as a probe molecule for the spectroscopic investigation. The BBSFG spectra of DPPC-d62 in the lung surfactant mixture are obtained in the C-D stretching region in real-time during film compression and expansion in a Langmuir trough. The BBSFG intensity of the CD3 stretch peak from DPPC-d62 terminal methyl groups is used as a measure of the interfacial density of DPPC-d62 after careful consideration of orientation effects. For the first time, the interfacial loss of DPPC in a complex lung surfactant mixture is quantified. Spectroscopic results reveal that there is an 18% DPPC-d62 interfacial loss during film respreading. However, the surface pressure-area isotherm measurements demonstrate that there is a rather large trough area reduction (37%) during film expansion. The relatively small interfacial loss of DPPC-d62 and the rather large trough area reduction indicate that the respreading of DPPC and non-DPPC components in the lung surfactant is not uniform and a surface refinement process exists during film compression and expansion. This refinement process results in a DPPC-enriched monolayer with a significant depletion of non-DPPC components after film respreading. Implication for replacement surfactant design from this work is discussed.     

A Theoretical Model of Pulmonary Surfactant Multilayer Collapse under Oscillating Area Conditions

Monolayers of adsorbed pulmonary surfactant collapse under compression and respread to the interface when the area expands. These mechanisms contribute to the large area hysteresis seen experimentally in a pulsating bubble surfactometer. This paper presents an analytical model which adds monolayer collapse and respreading to the more standard transport processes (diffusion, adsorption, and desorption). The model is robust and can mimic a large range of responses, from that of an insoluble monolayer to the large area hysteresis indicative of collapse and respreading. Our model suggests that multilayer dynamics are necessary to mimic the ultralow surface tensions of pulmonary surfactant. Copyright 2000 Academic Press.     

Differential capacity and chronocoulometry studies of a quaternary ammonium surfactant adsorbed on Au(111)

The adsorption of a model quaternary ammonium surfactant, octyltrimethylammonium triflate, on Au(111) has been studied using capacity and chronoculometry methods. The surfactant adsorbs on the metal surface as a non‐dissociated ion pair at moderate potentials but can be desorbed by either positive or negative polarization. Within the adsorption region, two states are observed which correspond to a horizontal monolayer and a higher coverage vertically oriented film. Measurements of capacity transients upon potential steps reveal a slow organization of the molecular film. Although it is possible to equate the transients to known surfactant film aggregate geometries, the results are in disagreement with thermodynamic results. In comparison with other studies, the results indicate that the states of surfactant adsorption depend on surfactant chain length and electrode crystallography. Copyright © 2013 John Wiley & Sons, Ltd.     

Interfacial organizations of gel phospholipid and cholesterol in bovine lung surfactant films

Pulmonary surfactants stabilize the lung by way of reducing surface tension at the air-lung interface of the alveolus. 31P NMR, thin-layer chromatography, and electrospray ionization mass spectroscopy of bovine lipid extract surfactant (BLES) confirmed dipalmitoylphosphatidylcholine (DPPC) to be the major phospholipid species, with significant amounts of palmitoyl-oleoylphosphatidylcholine, palmitoyl-myristoylphosphatidylcholine, and palmitoyl-oleoylphosphatidylglycerol. BLES and DPPC spread at the air-water interface were studied through surface pressure area, fluorescence, and Brewster angle microscopy measurements. Langmuir-Blodgett films of monomolecular films, deposited on mica, were characterized by atomic force microscopy. BLES films displayed shape, size, and vertical height profiles distinct from those of DPPC alone. Calcium ions in the subphase altered BLES film domain structure. The addition of cholesterol (4 mol %) resulted in the destabilization of compressed BLES films at higher surface pressures (>40 mN m-1) and the formation of multilayered structures, apparently consisting of stacked monolayers. The studies suggested potential roles for individual surfactant lipid components in supramolecular arrangements, which could be the contributing factors in pulmonary surfactant to attain low surface tension at the air-water interface.     

Drag of a Solid Particle Trapped in a Thin Film or at an Interface: Influence of Surface Viscosity and Elasticity

We propose a theoretical model for the motion of a spherical particle entrapped in a thin liquid film or in a monolayer of insoluble surfactant at the air/water interface. Both surface shear and dilational viscosity, surface diffusion, and elasticity of the film are taken into consideration. The drag force acting on the particle is analytically calculated and asymptotic expressions of the problem are provided. The relevance of the model is discussed by comparing the calculated "viscoelastic" drag, gamma(vel), to the one predicted by Saffman's theory, gamma(S), for cylindrical inclusions in membranes. Numerical analyses are performed to evaluate the contributions of the surface viscosity and the diffusion coefficient of the layer on the hydrodynamical resistance experienced by the particle. Copyright 2000 Academic Press.     

Molecular interactions of cord factor with dipalmitoylphosphatidylcholine monolayers: implications for lung surfactant dysfunction in pulmonary tuberculosis

Molecular interactions between mycobacterial cell wall lipid, cord factor (CF) and the abundant surfactant lipid, dipalmitoylphosphatidylcholine (DPPC) were investigated using Langmuir monolayers at physiological temperatures (37 degrees C). Surface topography of the films was visualized by atomic force microscopy (AFM). Thermodynamic behavior of the mixed monolayers was evaluated by investigating the molecular area excess, excess Gibbs free energy of mixing and maximum compressibility modulus (SCM(max)). Cord factor formed immiscible and thermodynamically unstable monolayers with DPPC. Monolayer presence of cord factor altered the physical state of DPPC monolayers from liquid condensed to liquid expanded with the lowering of SCM(max) from 160 to 40 mN/m, respectively. AFM imaging exhibited smooth homogenous surface topography of DPPC films which in the presence of cord factor was markedly altered with the appearance of aggregates and increased surface roughness. The results highlight the capacity of cord factor to disturb DPPC monolayer organization and structure. Interfacial presence of cord factor results in DPPC monolayer fluidization. Lung surfactant function is attributed to its ability to form well packed low compressibility films. Such molecular interactions suggest a dysfunction of lung surfactant in pulmonary tuberculosis due to surfactant monolayer fluidization.     

Scanning probe microscopy of adsorption layers of sodium polystyrenesulfonate/dodecyltrimethylammonium bromide complexes

Scanning probe microscopy is used to study adsorption films of sodium polystyrenesulfonate/dodecyltrimethylammonium bromide complexes, which are transferred from aqueous solution surfaces to the mica surface by the Langmuir-Blodgett method. It is established that the results obtained at surfactant concentrations below critical micelle concentration agree with the conclusions on the structure of the films dased on the data of the dilatational surface rheology (Noskov, B.A., Loglio, G., Miller, R., J. Phys. Chem. B, 2004, vol. 108, p. 18615). At low concentrations of the low-molecular-mass surfactant, a thin adsorption film containing a large number of holes is formed on the surface of an aqueous solution. As the surfactant concentration is increased to reach the region of a dramatic reduction in the dynamic surface elasticity, the morphology of the film drastically changes; i.e., dense three-dimensional aggregates are formed on the solution surface.     

A Study of Dynamic Interfacial Properties as Related to Foaming Properties of Sodium 2,5-dialkyl Benzene Sulfonates

In this article, foaming properties and dynamic interfacial properties of a series of sodium 2,5-dialkyl benzene sulfonates in aqueous solutions were carried out to elucidate the relationship between foaming properties and dynamic interfacial properties. The properties of foams generated from bubbling air through different surfactant solutions were measured using a modified Bikerman device. The dynamic surface tension and surface dilational elasticity were obtained from an image analysis technique based on the oscillating bubble method. The surfactants molecular adsorption at the air/water interface was introduced with Rosen empirical equation and the rate of adsorption was determined from measurements of the dynamic surface tension. The surfactant with the longest alkyl chain shows the lowest dynamic surface activity, which lead to the lowest foam volume. The short ortho straight alkyl chain has little effect on the arrangement of molecules at the interface and the foam stability changes a little with the changing of the ortho alkyl chain length. The foam stability is correlated with both the higher surface dilational elasticity and the larger surface monolayer strength.     

Electrical surface potential of pulmonary surfactant

Pulmonary surfactant is a mixed lipid protein substance of defined composition that self-assembles at the air-lung interface into a molecular film and thus reduces the interfacial tension to close to zero. A very low surface tension is required for maintaining the alveolar structure. The pulmonary surfactant film is also the first barrier for airborne particles entering the lung upon breathing. We explored by frequency modulation Kelvin probe force microscopy (FM-KPFM) the structure and local electrical surface potential of bovine lipid extract surfactant (BLES) films. BLES is a clinically used surfactant replacement and here served as a realistic model surfactant system. The films were distinguished by a pattern of molecular monolayer areas, separated by patches of lipid bilayer stacks. The stacks were at positive electrical potential with respect to the surrounding monolayer areas. We propose a particular molecular arrangement of the lipids and proteins in the film to explain the topographic and surface potential maps. We also discuss how this locally variable surface potential may influence the retention of charged or polar airborne particles in the lung.     

New insights into lung surfactant monolayers using vibrational sum frequency generation spectroscopy

At the air-water interface, interfacial molecular structure, intermolecular interactions, film relaxation and film respreading of model lung surfactant monolayers were studied using vibrational sum frequency generation (VSFG) spectroscopy combined with a Langmuir film balance. Chain-perdeuterated dipalmitoylphosphatidylcholine (DPPC-d62), palmitoyloleoyl-phosphatidylglycerol (POPG), palmitic acid (PA) and tripalmitin were investigated. In the DPPC-d62-PA binary monolayer, PA showed a condensing effect on the DPPC chains. On the contrary, in the DPPC-d62-POPG binary monolayer, POPG showed a fluidizing effect on the DPPC chains. In the ternary monolayer system of DPPC-d62-POPG-PA, the balance between the fluidizing and the condensing effect was also observed. In addition, the film relaxation behavior of DPPC-d62 and the enhanced film stability of DPPC-d62 caused by the addition of tripalmitin were observed. Real-time VSFG was also employed to study the respreading properties of a complex lung surfactant mixture containing DPPC-d62, POPG, PA and KL4 (a mimic of SP-B) peptide, which revealed DPPC enrichment after film compression.     

Surface functionalization of electro-deposited nickel

A new in situ electrochemical method of functionalizing an oxide-free Ni surface is demonstrated using octanethiol. Initial adsorption results in a multilayer molecular film, which blocks both the hydrogen evolution reaction (HER) and re-oxidation of the Ni by ambient oxygen. However, excess octanethiol can be removed by rinsing with ethanol, leaving behind a monolayer that continues to protect against re-oxidation but gives rise to an unexpected enhancement in the HER, with a greater enhancement for longer film formation times. The presence of an octanethiol monolayer on the surface was confirmed by spectroscopic observation of the CH(2), CH(3) and thiolate groups using infra red spectroscopy, while X-ray photo-electron spectroscopy demonstrated the effectiveness of the thiol layer as a barrier to surface oxidation. The electrochemically prepared octanethiol film impedes oxidation of the Ni in air more effectively than a film formed by immersion in a solution of octanethiol in ethanol.     

A Surface Rheological Study of Silwet L-77 Surfactant at the Air/Water Interface

The dilational viscoelastic properties of Silwet L-77, a trisiloxane surfactant of the general formula (Me₃SiO)₂SiMe(CH₂)₃(OCH₂CH₂)_7.5OH, at the air/water interface were investigated. Aqueous solutions of Silwet L-77 were spread onto a pendant drop and the dynamic surface tensions were measured by means of axisymmetric drop shape analysis. The surface dilatational elasticity, viscosity, and phase angle of the adsorption monolayer were also determined using the oscillating drop technique. The influences of frequency and concentration on the surface dilational properties were expounded. It is shown that the surface dilational modulus and elastic modulus increased with the increase of frequency, the viscous modulus was complex, while the phase angle decreased with the increase of frequency. Surface dilational modulus, elastic modulus, and viscous modulus passed through the maximum with the increase of bulk concentration and the phase angle increased with the increase of concentration.     

Dynamic Surface Elasticity of Polyelectrolyte/Surfactant Adsorption Films at the Air/Water Interface: Carboxylmethylchitosan and Cetyltrimethylammonium Bromide

The dynamic surface elasticity of the solution of carboxymethylchitosan (CMCH) and cetyltrimethylammonium bromide (C₁₆TAB) was measured as a function of the surfactant concentration and the surface age by the oscillating drop method. The results showed that the surface layer of the CMCH/C₁₆TAB solution transformed from loose to structured with the increase in the surfactant concentration. The surface elasticity versus the surface pressure curve during the adsorption showed different features at different surfactant concentration ranges, which was connected with the structural transformation of the surface layer. Our results show that the measurement of dynamic surface dilational properties is a powerful tool for studying the surface kinetics, which is helpful for dealing non-equilibrium systems in industry.