Hydrophobic acceleration in the Diels—Alder reaction of 9-hydroxymethylanthracene with <Emphasis Type="Italic">N</Emphasis>-phenylmaleimide

The Diels—Alder reaction rates of 9-hydroxymethylanthracene with N-phenylmaleimide and N-ethylmaleimide in water, butan-1-ol, ethylene glycol, acetonitrile, chloroform, and 1,4-dioxane have been compared.     

Bulk properties of a liquid phase mixture {ethylene glycol+<Emphasis Type="Italic">tert</Emphasis>-butanol} in the temperature range 278.15–348.15 K and pressures of 0.1-100 MPa. I. Experimental results,excess and partial molar volumes

The densities ρ and coefficients of compressibility k = ΔV/V ₀ of a binary mixture {ethylene glycol (1) + tert-butanol (2)} in the temperature range of 278.15–323.15 K and pressures of 0.1–100 MPa over the entire range of compositions of liquid phase state are measured. Found that the coefficients of compressibility k of the mixture increase both with an increase in the concentration of tert-butanol and with a rise in temperature and pressure. The excess molar volumes of the mixture, apparent, partial molar volumes, and limiting partial molar volumes of the components are calculated. It is showed that the excess molar volumes of the mixture are negative and decrease when the pressure increases. The excess molar volumes are described by the Redlich-Kister equation. The partial molar volumes of ethylene glycol sharply decrease in the range of high concentrations of tert-butanol. The dependences of partial molar volumes of ethylene glycol are characterized by the presence of a region of temperature inversion. The “negative compressibility” of the limiting partial volumes of ethylene glycol is revealed.     

Bulk properties of a liquid phase mixture {ethylene glycol+<Emphasis Type="Italic">tert</Emphasis>-butanol} in the temperature range 278.15–348.15 K and pressures of 0.1–100 MPa. II. Molar isothermal compressibility,molar isobaric expansibility,thermal pressure coefficient,and internal pressure

Based on the experimental data, the molar isothermal compressibilities, molar isobaric expansibilities, thermal pressure coefficients, internal pressures of a liquid phase mixture {ethylene glycol (1) + tert-butanol (2)} are calculated for a wide spectrum of compositions in the range of pressures of 0.1–100 MPa and temperatures of 278.15–323.15 K. Shown that the dependences of molar isothermal compressibilities K _{T, m} , molar isobaric expansibilities E _{P, m} , and isochoric thermal pressure coefficients β on the mole fraction of tert-butanol in the mixture are characterized by the absence of extrema typical of aqueous systems. The manifestation of negative partial expansibility and negative partial expansibility of ethylene glycol in the mixture is found. The thermal pressure coefficients decrease with an increase in the mole fraction of tert-butanol at all pressures and temperatures. A rise in the pressure increases the thermal pressure coefficient, while a rise in the temperature decreases its value due to a decrease of free space in the mixture. An increase in the concentration of tert-butanol leads to an increase in the negative temperature coefficient of internal pressure ΔP _int/ΔT, which indicates a weakening of intermolecular interaction at these compositions.     

Thermodynamic functions of the mixing of methacrylic acid in organic solvents

The saturated vapor pressure over solutions of methacrylic acid is measured tensimetrically in acetonitrile, benzene, hexane, 1,2-dichloroethane, and acetic acid is measured tensimetrically at 290–350 K. The composition of equilibrium phases, the activity coefficients of the components, and the thermodynamic functions of the mixing (H ^E , G ^E , S ^E ) of the investigated solutions are calculated from the temperature dependence data.     

Synthesis of water soluble metalloporphyrin-cored amphiphilic star block copolymer photocatalysts for an environmental application

Two series of water-soluble metalloporphyrin-cored amphiphilic star block copolymers were synthesized by controlled radical polymerizations such as atom transfer radical polymerization (ATRP) and reversible addition fragmentation chain transfer (RAFT), which gave eight amphiphilic block copolymer arm chains consisting of poly(n-butyl acrylate-b-poly(ethylene glycol) methyl ether methacylate) (PnBA-b-PEGMEMA, M_n,GPC = 78,000, M_w/M_n = 1.2, 70 wt% of PPEGMEMA) and poly(styrene-b-2-dimethylamino ethyl acrylate) (PS-b-PDMAEA, M_n,GPC = 83,000, M_w/M_n = 1.2, 67 wt% of PDMAEA), yielding porphyrin(Pd)-(PnBA-b-PPEGMEMA)₈ and porphyrin(Pd)-(PS-b-PDMAEA)₈, respectively. Obtained metalloporphyrin polymer photocatalysts were homogeneously solubilized in water to apply to the removal of chlorophenols in water, and was distinguished from conventional water-insoluble small molecular metalloporphyrin photocatalysts. Notably, we found that the water-soluble star block copolymers with hydrophobic–hydrophilic core–shell structures more effectively decomposed the chlorophenol, 2,4,6-trichlorophenol (2,4,6-TCP), in water under visible light irradiation (k = 1.39 h^?1, t_1/2 = 0.5 h) in comparison to the corresponding water-soluble star homopolymer, because the hydrophobic core near the metalloporphyrin effectively captured and decomposed the hydrophobic chlorophenols in water.     

Mass Spectrometric Detection of Charged Silver Nanoclusters with Hydrogen Inclusions Formed by the Reduction of AgNO<Subscript>3</Subscript> in Ethylene Glycol

In the problem of the production silver nanoparticles, mass spectrometry allows one to identify nanoclusters as nuclei or intermediates in the synthesis of nanoparticles and to understand the mechanisms of their formation. Using low-temperature secondary emission mass spectrometry, we determined the cluster composition of a system formed in the microwave treatment of a solution of AgNO₃ in ethylene glycol (M). Along with silver ion–ethylene glycol associates М _m ? Ag⁺ (m = 1–5) and small silver clusters AgM _n ⁺ (n = 1–9), unusual silver clusters with one hydrogen atom [Ag _n H]⁺ (n = 2, 4) were observed. Possible pathways for the formation of silver nanoparticles taking into account hydrogen-containing cluster intermediates are discussed.     

Gas-chromatographic determination of trace <Emphasis Type="Italic">O</Emphasis>-isobutyl-2-<Emphasis Type="Italic">S</Emphasis>-(<Emphasis Type="Italic">N,N</Emphasis>-diethylamino)ethyl ester of methylthiophosphonic acid (VX-type compounds) in slime

A procedure was proposed for the gas-chromatographic determination of trace O-isobutyl-S-2-(N,N-diethylamino)ethyl ester of methylthiophosphonic acid (mixed ester, ME) in burning products formed after the detoxication of elements in building constructions, personal protection equipment, waste degassing solutions, and other production wastes (slime) at a level of (1.0–10.0) × 10^?8 mg/g. The procedure is based on the extraction of ME from an analyzed material with a mixture of aqueous solutions of monoethanolamine and NaOH, its back extraction to hexane, the evaporation of the hexane layer (with the addition of HCl) to dryness, the transformation of ME into methyl ester of O-isobutylmethylphosphonic acid with the use of methanol in the presence of AgNO₃, and the chromatography of the derivative on an open tubular column with the chemically modified HP-INN OWax stationary phase with the use of a flame-photometric detector.     

Effect of Viscosity of Dimethacrylate Ester-Based Compositions on the Kinetics of Their Photopolymerization in Presence of <Emphasis Type="Italic">o</Emphasis>-Quinone Photoinitiators

The kinetics of photopolymerization of compositions based on dimethacrylate oligomers with viscosities ranging from 1.5 to 376.7 cSt under the action of visible light (9,10-phenanthrenquinone and a mixture of 3,6-di-tert-butyl-1,2-benzoquinone with N,N-dimethylcyclohexylamine as initiators) is studied. Dimethacrylates of poly(ethylene glycols) with the number of ethoxy fragments of n = 1–4 and 8, dimethacrylates of OKM-2 and MDF-2 trademarks, and solvents (benzene, acetonitrile, and dinonyl ester of phthalic acid) are used. At the initial stages of the reaction, the dependence of the reduced rate of photopolymerization of such compositions on their initial viscosity is described by a curve attaining a plateau at a viscosity of 100 cSt or above. The dependences of viscosity of all dimethacrylates on temperature ranging from –10 to +80°С are determined, the effective activation energies of monomer viscous flow are calculated, and the temperature dependences of the number of molecules in associates for each of the oligomers are ascertained. At Т = 20°С, the number of molecules in the associates of poly(ethylene glycol) dimethacrylates with n = 1–4 does not exceed 10, for n = 8 the number of molecules in the associates is ～10², and for dimethacrylates of OKM-2 and MDF-2 trademarks this value is above 10⁴.     

Sorption of adamantane phenylamide derivatives on hyper-cross-linked polystyrene from water–acetonitrile eluents

Study of the main physicochemical features of the sorption of phenylamide adamantane derivatives on hyper-cross-linked polystyrene from water–acetonitrile solutions shows that both hydrophobic and electronic interactions make a large contribution to retention, especially for a chlorine-containing derivative in which there are π–p and π–d interactions between the outer-shell electrons of the chlorine atom in addition to π–π interactions between aromatic fragments of the sorbate and sorbent.     

A thermodynamic study of complexation process between <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-dipyridoxylidene(1,4-butanediamine) and Cd<Superscript>2+</Superscript> in some binary mixed solvents using conductometry

Complexation of the Cd²⁺ ion with N,N′-dipyridoxylidene(1,4-butanediamine) Schiff base was studied in pure solvents including acetonitrile (AN), ethanol (EtOH), methanol (MeOH), tetrahydrofuran (THF), dimethylformamide (DMF), water (H₂O), and various binary solvent mixtures of acetonitrile–ethanol (AN–EtOH), acetonitrile–methanol (AN–MeOH), acetonitrile–tetrahydrofuran (AN–THF), acetonitrile–dimethylformamide (AN–DMF), and acetonitrile–water (AN–H₂O) systems at different temperatures using the conductometric method. The conductance data show that the stoichiometry of complex is 1: 1 [ML] in all solvent systems. A non-linear behavior was observed for changes of log K_f of [Cd(N,N′-dipyridoxylidene(1,4-butanediamine)] complex versus the composition of the binary mixed solvents, which was explained in terms of solvent–solvent interactions. The results show that the thermodynamics of complexation reaction is affected by the nature and composition of the mixed solvents.     

Thermochemical analysis of intermolecular interactions between <Emphasis Type="Italic">N</Emphasis>-acetylglycine and polyols in aqueous solutions

The integral enthalpies of dissolution Δ_sol H _m for N-acetylglycine in aqueous solutions of glycerol, ethylene glycol and 1,2-propylene glycol are measured via solution calorimetry. The standard enthalpies of dissolution (Δ_sol Н ⁰) and transfer (Δ_tr Н ⁰) for N-acetylglycine from water to aqueous solutions of polyhydric alcohols are calculated from experimental data. Positive values of enthalpy coefficients of pair interactions h _xy for amino acids and polyol molecules are calculated using the McMillan–Mayer theory. The results are discussed using an approach for evaluating different types of interactions in ternary systems and the effect the structural features of interacting biomolecules have on the thermochemical characteristics of N-acetylglycine dissolution.     

Enthalpy of mixing in the propylene oxide–dimethylformamide and propylene oxide–ethylene glycol systems

Heat of mixing of propylene oxide with N,N-dimethylformamide and ethylene glycol has been determined by means of microcalorimetry. Theoretically suggested choice of the aprotic solvent as a selective separating agent for the propylene oxide–methanol binary mixture has been experimentally justified.     

Effect of pressure on the structure and dynamics of hydrogen bonds in ethylene glycol–water mixtures: Numerical simulation data

Water?ethylene glycol mixtures containing from 0.002 to 0.998 mole fractions of ethylene glycol at T = 298.15 K and P = 0.1 and 100 MPa are simulated by means of classical molecular dynamics. Such structural and dynamic characteristics of hydrogen bonds as the average number and lifetime, along with the distribution of molecules over the number of hydrogen bonds, are calculated; their changes are analyzed, depending on the mixture’s composition and pressure. It is shown that the components are characterized by a high degree of interpenetration and form a uniform infinite hydrogen-bonded cluster over the range of concentrations. It is found that the higher the concentration of ethylene glycol, the greater the stability of all hydrogen bonds. It is concluded that an increase in pressure lowers the number of hydrogen bonds, while the average lifetime of the remaining hydrogen bonds grows.     

Influence of solvents and novel extraction methods on bioactive compounds and antioxidant capacity of <Emphasis Type="Italic">Phyllanthus amarus</Emphasis>

Phyllanthus amarus (P. amarus) is a herbal plant used in the treatment of various diseases such as hepatitis, diabetes, and cancer. Efficiency of its bioactive compounds extraction and therefore the biological activity of the extracts are significantly influenced by both solvent character and extraction method. This study is aimed at the determination of the influence of six various solvents (water, acetonitrile, ethanol, methanol, ethyl acetate, and dichloromethane) and nine different extraction methods (conventional, ultrasound-assisted, microwave-assisted, and six novel methods) on the extraction efficiency and antioxidant capacity of P. amarus. The results indicated that water extracted the maximal amount of phenolics from P. amarus and had the highest antioxidant capacity, while microwave-assisted extraction provided the highest yields of phenolics and saponins, and the highest antioxidant capacity with the lowest energy consumption when compared to the other extraction methods. These findings implied that water and microwave-assisted extraction are recommended as the most effective solvent and method for the extraction of bioactive compounds from P. amarus for potential application in the pharmaceutical and nutraceutical industries.     

The SAMPL5 challenge for embedded-cluster integral equation theory: solvation free energies,aqueous p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript>, and cyclohexane–water log <Emphasis Type="Italic">D</Emphasis>

We predict cyclohexane–water distribution coefficients (log D _7.4) for drug-like molecules taken from the SAMPL5 blind prediction challenge by the “embedded cluster reference interaction site model” (EC-RISM) integral equation theory. This task involves the coupled problem of predicting both partition coefficients (log P) of neutral species between the solvents and aqueous acidity constants (pK _a) in order to account for a change of protonation states. The first issue is addressed by calibrating an EC-RISM-based model for solvation free energies derived from the “Minnesota Solvation Database” (MNSOL) for both water and cyclohexane utilizing a correction based on the partial molar volume, yielding a root mean square error (RMSE) of 2.4 kcal mol^?1 for water and 0.8–0.9 kcal mol^?1 for cyclohexane depending on the parametrization. The second one is treated by employing on one hand an empirical pK _a model (MoKa) and, on the other hand, an EC-RISM-derived regression of published acidity constants (RMSE of 1.5 for a single model covering acids and bases). In total, at most 8 adjustable parameters are necessary (2–3 for each solvent and two for the pK _a) for training solvation and acidity models. Applying the final models to the log D _7.4 dataset corresponds to evaluating an independent test set comprising other, composite observables, yielding, for different cyclohexane parametrizations, 2.0–2.1 for the RMSE with the first and 2.2–2.8 with the combined first and second SAMPL5 data set batches. Notably, a pure log P model (assuming neutral species only) performs statistically similarly for these particular compounds. The nature of the approximations and possible perspectives for future developments are discussed.     

Photolysis of <Emphasis Type="Italic">meta</Emphasis>-azidophenol in solutions

The photolysis of meta-azidophenol in various organic solvents and aqueous solutions is studied by IR spectroscopy, electronic absorption spectroscopy, thin-layer chromatography (TLC), and analytical spot-test reactions. The polymeric derivatives of hydroxylamine are formed in organic solvents (benzene, chloroform, acetonitrile) via the interaction of nitrene with the phenol group of a neighboring m-azidophenol molecule. N-(meta-Hydroxyphenyl)hydroxylamine,—the product of the nitrene reaction with water, is formed in ethanol and aqueous solutions.     

Diffusion and phase behavior of a hydroxypropylcellulose-poly(ethylene glycol) system

The solubility and interdiffusion between hydroxypropylcellulose samples of various molecular masses (M _w = 8 × 10⁴, 14 × 10⁴, 37 × 10⁴, 85 × 10⁴, and 115 × 10⁴) and poly(ethylene glycol) (M _w = 400 and 1500) in the range 18–210°C have been studied by optical interferometry and polarization microscopy methods. Oligomeric poly(ethylene glycols) have been considered as solvents for hydroxypropylcellulose. Phase diagrams have been constructed, and Flory-Huggins thermodynamic interaction parameters have been calculated. For the hydroxypropylcellulose-poly(ethylene glycol) 400 system, an LC and crystalline equilibria have been realized. An increase in the M _w of hydroxypropylcellulose to 1500 leads to the appearance of a wide region of amorphous phase segregation with a UCST, whereas the liquidus line is conserved at high concentrations of hydroxypropylcellulose. Such a superposition of two kinds of phase equilibrium that is achieved only with a change in M _w of the oligomeric solvent has been observed for the first time. For all the systems under examination, the kinetics of diffusion mixing has been estimated and the activation energies of the process have been calculated. The concentration dependences of diffusion coefficients demonstrate jumps in the mesomorphic-transition region.     

Photolysis of <Emphasis Type="Italic">ortho</Emphasis>-azidophenol in various solvents

The photolysis of ortho-azidophenol in water, ethanol, acetonitrile, chloroform, and benzene was studied by IR and electronic spectroscopy and thin-layer chromatography. It was found that an equilibrium between ortho-azidophenol and its quinonoid form occurred in benzene. In the photolysis of ortho-azidophenol in benzene, intramolecular hydrogen bonding facilitates the degradation of the azido group through the mechanism of formation of intermediate triazene structures. In the other solvents, which exclude intramolecular hydrogen bonding, the nitrene mechanism of photolysis yielding ortho-aminophenol, ortho-iminoquinone, and an azo compound is operative. The rate of formation of photolysis products depends on the nature of the solvent.     

Density,Viscosity, and Glass Transition of an Ethylenediamine–Ethylene Glycol Binary System

Densities ρ and viscosities η were measured for the binary mixtures of ethylenediamine (EDA) and ethylene glycol (EG) in the temperature range 288.15–323.15 K for ρ and at 273.15–323.15 K for η, both of which are broader temperature ranges than those reported previously. The value of ρ monotonously decreases against the mole fraction of EDA, x _EDA, and increasing temperature. The concentration dependence of η exhibits a maximum in the intermediate concentration range at all temperatures measured. The glass transition temperature, T _g, for samples with x _EDA < 0.7 was measured using differential scanning calorimetry. The measured T _g values show a peak in the intermediate concentration range, which is a behavior similar to that of η; however, the peak concentrations for η and T _g did not precisely align because of a deviation in the maximum hydrogen-bond density. The partial molar volumes for EDA and EG and the thermal expansivities, α, were obtained from ρ. Results in the present study are discussed in terms of the extensively increasing hydrogen-bond density for polyamine–polyhydric alcohol systems.