Phase Equilibrium States in the <Emphasis Type="Italic">n</Emphasis>-Dodecane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane System

A three-component system comprising cyclododecane and n-alkanes is studied by means of differential thermal analysis on a differential scanning microcalorimeter. It is concluded that the investigated system is of the eutectic type and the n-dodecane–n-hexadecane–cyclododecane eutectic mixture system is 73.0 wt % n-С₁₂Н₂₆, 9.0 wt % n-С₁₆Н₃₄, and 18.0 wt % С₁₂Н₂₄. Its melting point is found to be ?17.7°C.     

Phase Diagrams of the <Emphasis Type="Italic">n</Emphasis>-Decane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane, <Emphasis Type="Italic">n</Emphasis>-Decane–Cyclododecane,and <Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane Systems

The n-decane–n-hexadecane–cyclododecane, n-decane–cyclododecane, and n-hexadecane–cyclododecane systems are studied by means of low-temperature differential thermal analysis using a differential scanning heat flow calorimeter. It is noted that all studied systems belong to the eutectic type. It is concluded that in the n-decane–n-hexadecane–cyclododecane system, the eutectic composition contains 85.0 wt % n-С₁₀Н₂₂, 4.0 wt % n-С₁₆Н₃₄, and 11.0 wt % С₁₂Н₂₄. It has a melting point of ?35.0°C.     

Deformation of AUK microporous carbon adsorbent induced by methane adsorption

The dependence of the relative linear deformation of AUK microporous carbon adsorbent on pressure is studied upon the adsorption of methane in the pressure range of 1 Pa to 6 MPa at 177.65, 216.2, 243.3, 273.15, 313, 333, and 393 K. It is found that the curves of adsorption-induced deformation show similar behavior; except for in the initial pressure range (p < 0.2 MPa), the adsorption-induced deformation increases with pressure and drops as the temperature rises. At low temperatures, a shrinkage region is observed in the initial part of the deformation curves that narrows with a rise in temperature. At temperatures above 350 K, the initial shrinkage is absent and the adsorbent expands with an increase in methane pressure. In the pressure and temperature ranges under investigation, the contribution of deformation to the differential isosteric heat of adsorption of AUK carbon adsorbent does not exceed 2%. It is shown that, upon the adsorption of CO₂, N₂, Ar, and CH₄ at 273 K and pressures below 6 MPa, the maximum deformation of AUK adsorbent varies cymbately with variations in the Lennard-Jones (6–12) potential constants for the pair interaction of gas molecules.     

Coprecipitation of calcium hydroxyapatite,graphene oxide,and chitosan from aqueous solutions

We determined the character of interactions between calcium hydroxyapatite Са₁₀(РO₄)₆(ОН)₂ (HA), graphene oxide (GO), and chitosan (С₆Н₁₁NO₄) _n (CHT) to yield HA/CHT/GO nanocomposites (NCs) in the СаС1₂–(NH₄)₂НРО₄–NH₃–Н₂О–(С₆Н₁₁NO₄) _n –GO system (25°С). A set of physicochemical methods helped us to elucidate composition–synthesis parameters–structure–particle size–properties correlations for the prepared NCs and to prove the feasibility to manufacture NCs with tailored HA, CHT, and GO contents, described by the bulk formula Са₁₀(РО₄)₆(ОН)₂ · х(С₆Н₁₁NO₄) _n · yGO · zН₂О, where х = 0.1, 0.2, 0.3; y = 0.6, 1.2, 2.4; and z = 6.0–7.4.     

Oxidation of reaction products of <Emphasis Type="Italic">p</Emphasis>-aryl-<Emphasis Type="Italic">С</Emphasis>,<Emphasis Type="Italic">С</Emphasis>-disubstituted nitrones and dimethyl 3-methylenecyclopropane-1,2-dicarboxylate

Oxidation with 2,3-dichloro-4,5-dicyanobenzoquinone of 2,4-dihydro-1Н-azeto[1,2-a]quinoline-3,4 -dicarboxylates obtained in the reaction of N-aryl-С,С-disubstituted nitrones with Feist’s acid ester resulted in the formation of 2-vinylquinoline-3,4-dicarboxylates in good yields.     

Copolymers of Maleic Anhydride and Methylene Alkanes: Synthesis,Modification, and Pour Point Depressant Properties

Copolymers with the equimolar composition and presumably alternating microstructure are synthesized by the radical copolymerization of methylene alkanes, the products of dimerization of α-olefins with the general formula RCH₂CH₂C(=CH₂)R (R = n-C₄H₇, n-C₆H₁₃, n-C₈H₁₇, n-C₁₀H₂₁, n-C₁₂H₂₅), with maleic anhydride. The products of reactions between the obtained copolymers and 1-octadecanamine or 1-octadecanol are isolated and spectrally characterized. The depressor efficiency of the copolymers with respect to the solutions of paraffins in n-alkanes is studied. Qualitative differences between the copolymers of maleic anhydride with methylene alkanes and reference copolymers based on 1-octadecene are estimated using vibrational viscometry combined with analysis of the size and morphology of paraffin crystals. It is shown that the copolymers with methylene alkanes more effectively decrease the cold filter plugging point (CFPP) of paraffin solutions in n-decane.     

Synthesis and van Alphen–Hüttel rearrangement of substituted 3<Emphasis Type="Italic">H</Emphasis>-pyrazoles,adducts of 1,3-dipolar cycloaddition of 9-diazofluorene and diphenyldiazomethane to trimethyl(tosylethynyl)silane

Trimethyl(tosylethynyl)silane reacted in ethyl ether at 20°С with diphenyldiazomethane affording 3Н-pyrazole, a product of 1,3-dipolar cycloaddition against Auwers rule. The reaction with 9-diazofluorene is less selective, but its regioselectivity is also governed by the steric effect of the bulky trimethylsilyl substituent at the triple bond С≡С. The adduct with diphenyldiazomethane at boiling in methanol or keeping in glacial acetic acid in the presence of a catalytic quantity of conc. H₂SO₄ undergoes the Van Alphen–Hüttel rearrangement by the migration of the phenyl substituent to the atom N² in the 1Н-pyrazole. The same 1Н-pyrazole together with a product of nitrogen elimination, trimethylsilyl substituted cyclopropane, is formed in the 2: 1 ratio at boiling in benzene. A similar behavior is observed in the glacial acetic acid for the anti-Auwers adduct of 9-diazofluorene. It suffers nitrogen elimination at boiling in benzene converting in spirocyclic cyclopropene. The Auwers adduct of 9-diazofluorene at boiling in methanol transforms due to the van Alphen–Hüttel rearrangement into the corresponding 4Н-pyrazole that undergoes a hydrodesilylation to give a derivative of 1Н-pyrazole, 3-tosyl-1(2)H-dibenzo[e,g]indazole.     

A thermogravimetric study of lithium tetraalkoxyborates

Properties of lithium tetraalkoxyborates Li[t-C₄H₉OB(OR)₃] (R = n-C₄H₉ to n-C₈H₁₇, n-C₁₂H₂₅) were studied by differential thermogravimetry. The kinetic parameters and heat effects of thermal decomposition of lithium tetraalkoxyborates in air and inert gas atmosphere as functions of the carbon chain length were determined.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

(Iodomethyl)fluorosilanes: Synthesis and Reactions

The methods of synthesis of bifunctional (iodomethyl)fluorosilanes of general formula ICH₂SiMe_nF_3–n (n = 0, 2) have been elaborated; the structure was proved by ¹H, ¹³C, ²⁹Si NMR spectroscopy. The reaction of (iodomethyl)dimethylfluorosilane with O-trimethylsilyl derivative of N,N'-dimethylhydrazide of trifluoroacetic acid gives rise to the formation of 2,2,4,4-tetramethyl-6-(trifluoromethyl)-3,4-dihydro-2Н-1,4,5,2-oxadiasilin-4-ium iodide with tetracoordinate silicone atom.     

Onium Sulfates and Hydrogen Sulfates: Products of Reactions of Sulfur(IV) Oxide with Aqueous Solutions of Alkylamines and Aniline

The reaction products formed in the SO₂–L–H₂O–O₂ systems (L is n-propylamine, n-butylamine, tert-butylamine, n-heptylamine, n-octylamine, aniline) were isolated and identified as “onium” salts [n-C₃H₇NH₃]₂SO₄, [n-C₄H₉NH₃]₂SO₄, [t-C₄H₉NH₃]₂SO₄, [n-C₇H₁₅NH₃]₃SO₄(HSO₄), [n-C₈H₁₇NH₃]₃SO₄(HSO₄), and [C₆H₅NH₃]₂SO₄. The products were characterized by elemental analysis, IR and Raman spectroscopy, mass spectrometry, and thermogravimetry.     

Synthesis and Gas-Transport Properties of Iron- and Zirconium-Containing Polydimethylsiloxanes

Novel membrane materials—three-dimensional polydimethylsiloxane networks with nonaggregated metal atoms (Fe, Zr)—have been synthesized using commercial siloxane rubber SKTN and polyfunctional metallosiloxane as a crosslinking agent. For the resulting composites, the permeability, diffusion, and solubility coefficients for a wide range of gases have been determined. It has been found that the permeability coefficients for most of the gases are close to values previously obtained for linear siloxanes; however, the permeability and Р(С₄Н₁₀)/Р(СН₄) selectivity for n-butane are significantly higher. It has been shown that the differences in the permeability coefficients are attributed to higher solubility coefficients of gases in the synthesized composites.     

Structure of A Coordination Polymer [Cu(En)<Subscript>2</Subscript>CrO<Subscript>4</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

The crystal structure of [Cu(En)₂CrO₄]_n (En is ethylenediamine) is determined: a = 14.7359(4) Å, b = 9.8083(3) Å, c = 14.2664(4) Å, V = 2061.98(10) ų, space group Cmce, Z = 8, d_x = 1.931 g/cm³. It is demonstrated that the studied phase is isostructural with [Сu(Еn)₂SO₄]_n. A pseudotetragonal copper atom coordination (Cu–N 2.0204 Å and 2.0244 Å, ∠N–Cu–N 84.73°) is completed to distorted octahedral by two oxygen atoms of chromate anions (Cu–O 2.433 Å and 2.380 Å).     

The inductive effect of a radical center and transferability of the properties of functional groups in <Emphasis Type="Italic">n</Emphasis>-alkyl radicals

Electron density distribution in n-alkyl radicals (from ethyl to n-octyl) was studied by the B3LYP/6-311++G(3df,3pd) DFT method. The theory of atoms in molecules was used to show that the inductive effect of a free valence extends to two neighboring CH₂ groups. The electronegativities χ(C^?H₂) > χ(CH₃) > χ(CH₂) of groups and χ(C^?) > χ(H) > χ(C) atoms were qualitatively determined. The group method for calculating the enthalpies of formation of n-alkyl radicals Δ_f H°(n-C _n H_{2n+ 1}, n > 5) was substantiated.     

Sorbostriction of FAS-3 microporous carbon adsorbent upon vapor adsorption from a flow of nitrogen carrier gas

Sorbostriction (adsorption-induced deformation) of FAS-3 microporous carbon adsorbent is investigated under dynamic conditions upon adsorption of benzene, carbon tetrachloride, and n-hexane vapors from a flow of nitrogen carrier gas at 573 K. The values of maximum deformation and corresponding times depend on the amount of an adsorptive. The peak time of sorbostriction curves is different for each substance under study, which makes it possible to use the effect of wavelike sorbostriction for the development of sensors for the control of qualitative and quantitative compositions of gas mixtures.     

Reaction 5-(Arylmethylidene)pyrimidine-2,4,6(1<Emphasis Type="Italic">H</Emphasis>,3<Emphasis Type="Italic">H</Emphasis>,5<Emphasis Type="Italic">H</Emphasis>)-triones with L-Proline and Aldehydes

Boiling in toluene of 5-(arylmethylidene)pyrimidine-2,4,6(1H,3H,5H)-triones with L-proline and aldehyde led to the formation of previously unknown substituted 1′-arylhexahydro-1H-spiro[pyrimidine-5,2′-pyrrolysine]-2,4,6(1H,3Н,5Н)-triones.     

Alkylation of 3-methyl-1<Emphasis Type="Italic">H</Emphasis>-acenaphtho[5,6-<Emphasis Type="Italic">de</Emphasis>]pyridazine

Alkylation of 3-methyl-1Н-acenaphtho[5,6]pyridazine with methyl and propyl iodides as well as with benzyl chloride in alkaline medium leads to the formation of the corresponding both N- and С-substituted pyridazine derivatives and also to the dimerization product of the initial compound. The ratio of obtained compounds depends on the used hydride, reaction temperature, and solvent.     

Study of Acidic (Tetracaprolactam) Dodecamolybdosilicate of the Composition (C<Subscript>6</Subscript>H<Subscript>11</Subscript>NO)<Subscript>4.5</Subscript>Н<Subscript>4</Subscript>[SiМо<Subscript>12</Subscript>O<Subscript>40</Subscript>]

New caprolactam dodecamolybdosilicate of the composition (C₆H₁₁NO)_4.5Н₄[SiМо₁₂O₄₀] (I) is synthesized. Chemical and crystallographic analyses, NMR and IR spectroscopic studies are performed. Compound I is found to crystallize in the monoclinic system with the space group P2₁/n. Unit cell parameters are: a = 19.945(4) Å, b = 13.340(3) Å, c = 28.110(6) Å, β = 110.75(3)°, ρ_calc = 2.232 g/cm³, М = 2350.63, Z = 4, V = 6994(3) ų.     

The influence of carbon nanotubes on the relative stability of diborane molecular forms

Relative stability of three molecular forms of diborane in the model single-walled carbon nanotubes has been studied by means of the PBE/3ζ hybrid DFT method. The influence of the force field of the nanotube results in the decrease of the В–В bond length, decrease of the energy difference between the orthogonal and the planar forms, and appearance of high negative charge at the В₂Н₄ molecule. The strengthening of these effects is not related to the length and geometry [(n,n) or (n,0)] of the nanotube, but is determined only by the nanotube diameter.     

Fused pyrimidine systems: XVI. Electrophilic intramolecular cyclization of 2-(alkenylsulfanyl)pteridin-4(3<Emphasis Type="Italic">H</Emphasis>)-ones

2-[Allyl(but-3-en-1-yl, pent-4-en-1-yl)sulfanyl]pteridin-4(3Н)-ones at heating in polyphosphoric acid undergo an intramolecular cyclization affording respectively 9-methyl-8,9-dihydro-5H-[1,3]thiazolo[3,2-a] pteridin-5-one and 10-methyl(ethyl)-9,10-dihydro-5Н,8Н-[1,3]thiazino[3,2-a]pteridin-5-ones of angular structure. The cyclization of 2-(alkenylsulfanyl)pteridin-4(3Н)-ones under the action of iodine or arylsulfenyl chlorides afforded iodo(arylsulfanyl) derivatives of angularly fuzed thiazolo- and thiazinopteridines.