Silanization of polyelectrolyte-coated particles: an effective route to stabilize Raman tagging molecules adsorbed on micrometer-sized silver particles

Micrometer-sized Ag (microAg) powders are very efficient surface-enhanced Raman scattering (SERS) substrates. To use microAg powders as a core material for molecular sensors operating via SERS, it is necessary to stabilize the tagging (i.e., SERS-marker) molecules adsorbed onto them. We demonstrate in this work that once the tagging molecules are coated with aliphatic polyelectrolytes such as poly(allylamine hydrochloride), the base-catalyzed silanization can be readily carried out to form stable silica shells around the polyelectrolyte layers by a biomimetic process; any particle can therefore be coated with silica since polyelectrolytes can be deposited beforehand via a layer-by-layer deposition method. Even after silanization, the SERS peaks of marker molecules on microAg particles are the only observable peaks since aliphatic polyelectrolytes, as well as silica shells, are intrinsically weak Raman scatterers, and more importantly, the SERS signals must be derived mostly from the first layer of the adsorbates (i.e., the marker molecules) in direct contact with the microAg particles. Silica shells, once fabricated, can further be derivatized to possess biofunctional groups; therefore, the modified microAg particles can be used as platforms of highly stable SERS-based biological sensors, as well as barcoding materials.     

Silver-particle-based surface-enhanced resonance Raman scattering spectroscopy for biomolecular sensing and recognition

We demonstrate in this work that 2-μm-sized Ag (μAg) powders can be used as a core material for constructing biomolecular sensing/recognition units operating via surface-enhanced resonance Raman scattering (SERRS). This is possible because μAg powders are very efficient substrates for both the diffuse reflectance IR and the surface-enhanced Raman scattering–SERRS spectroscopic characterization of molecular adsorbates prepared in a similar manner on silver surfaces. Besides, the agglomeration of μAg particles in a buffer solution can be prevented by the layer-by-layer deposition of cationic and anionic polyelectrolytes such as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA). In this particular study, we used rhodamine B isothiocyanate (RhBITC) as a SERRS marker molecule, and μAg powders adsorbed consecutively with RhBITC and PAH–PAA bilayers were finally derivatized with biotinylated poly(l-lysine). On the basis of the nature of the SERRS peaks of RhBITC, those μAg powders were confirmed to selectively recognize streptavidin molecules down to concentrations of 10⁻¹⁰ g mL⁻¹. Since a number of different molecules can be used as SERS–SERRS marker molecules, the present method proves to be an invaluable tool for multiplex biomolecular sensing/recognition via SERS and SERRS.     

Surface-enhanced Raman scattering of 4-aminobenzenethiol on silver nanoparticles substrate

Active surface-enhanced Raman scattering (SERS) silver nanoparticles substrate was prepared by multiple depositions of Ag nanoparticles on glass slides. The substrate is based on five depositions of Ag nanoparticles on 3-aminopropyl-trimetoxisilane (APTMS) modified glass slides, using APTMS sol–gel as linker molecules between silver layers. The SERS performance of the substrate was investigated using 4-aminobenzenethiol (4-ABT) as Raman probe molecule. The spectral analyses reveal a 4-ABT Raman signal enhancement of band intensities, which allow the detection of this compound in different solutions. The average SERS intensity decreases significantly in 4-ABT diluted solutions (from 10⁻⁴ to 10⁻⁶ mol L⁻¹), but the compound may still be detected with high signal/noise ratio. The obtained results demonstrate that the Ag nanoparticles sensor has a great potential as SERS substrate.     

Effect of Ag and Au nanoparticles on the SERS of 4-aminobenzenethiol assembled on powdered copper

Raman scattering measurements were conducted for 4-aminobenzenethiol (4-ABT) assembled on powdered copper substrates. Initially, very weak Raman peaks were detected, but upon attaching Ag nanoparticles probably via NH2 groups onto 4-ABT/Cu, distinct Raman spectra were observed. Considering the fact that no Raman peak was identified when Ag nanoparticles were adsorbed on 4-aminophenyl-derivatized silane monolayers assembled on silica powders, the Raman spectra observed for Ag@4-ABT/Cu should be surface-enhanced Raman scattering (SERS) spectra, occurring by an electromagnetic coupling of the localized surface plasmon of Ag nanoparticles with the surface plasmon polariton of Cu powders. The extra enhancement factor attainable by the attachment of a single Ag nanoparticle is estimated to be as large as 1.4 x 10(5) in the case when 632.8-nm radiation is used as the excitation source. When Au nanoparticles were attached onto 4-ABT/Cu, at least an order of magnitude weaker Raman spectra were obtained at all excitation wavelengths, however, indicating that the Au-to-Cu coupling should be far less effective than the Ag-to-Cu coupling for the induction of SERS.     

Adsorption of 2-aminobenzothiazole on colloidal silver particles: an experimental and theoretical surface-enhanced Raman scattering study

Surface-enhanced Raman scattering (SERS) spectra of the biologically important 2-aminobenzothiazole (2-ABT) molecule adsorbed on silver hydrosols are compared with its FTIR spectrum and normal Raman spectroscopy (NRS) spectrum in the bulk and in solution. The optimized structural parameters and the computed vibrational wavenumbers of the compound have been estimated from ab initio (Hatree-Fock) and density functional calculations. Some vibrational modes of the molecule have been reassigned. Concentration-dependent SERS spectra of the molecule reveal the existence of two types of vertically adsorbed species on colloidal silver particles, whose relative population varies with the adsorbate concentrations. The adsorption geometry and structural parameters of one type of adsorbed species are related to the NRS spectrum of the chemically prepared and theoretically modeled 2-ABT-Ag(I) coordination compound.     

Easy deposition of Ag onto polystyrene beads for developing surface-enhanced-Raman-scattering-based molecular sensors

We describe a very simple electroless plating method that can be used to prepare Ag-coated polystyrene beads. Robust Ag nanostructures are reproducibly fabricated by soaking polystyrene beads in ethanolic solutions of AgNO(3) and butylamine. When the molar ratio of butylamine to AgNO(3) is far below 1.0, distinct nanosized Ag particles are formed on the polystyrene beads, but by increasing the amount of butylamine, network-like Ag nanostructures are formed that possess very broad UV/vis absorption characteristics extending from the near-UV to near-infrared regions. In conformity with the UV/vis absorption characteristics, the Ag-deposited polystyrene beads were highly efficient surface-enhanced Raman scattering (SERS) substrates, with an enhancement factor estimated using 4-aminobenzenethiol (4-ABT) as a model adsorbate to be larger than 1.1x10(6). On the basis of the nature of the SERS peaks of 4-ABT, those Ag-deposited polystyrene beads were confirmed, after attaching biotin groups over 4-ABT, to selectively recognize streptavidin molecules down to concentrations of 10(-11) g mL(-1) (i.e., approximately 0.2 pM). Since a number of different molecules can be used as SERS-marker molecules (such as 4-ABT), multiple bioassays are readily accomplished via SERS after attaching appropriate host or guest molecules onto them.     

Surface-enhanced Raman scattering of 4-aminobenzenethiol in Ag sol: relative intensity of a1- and b2-type bands invariant against aggregation of Ag nanoparticles

4-Aminobenzenthiol (4-ABT) is an unusual molecule, showing variable surface-enhanced Raman scattering (SERS) spectra depending upon measurement conditions. In an effort to reduce ambiguity and add clarity, we have thus conducted an ultraviolet-visible (UV-vis) extinction measurement, along with Raman scattering measurement, after adding 4-ABT into aqueous Ag sol. Upon the addition of 4-ABT, the surface plasmon absorption band of Ag at 410 nm gradually diminished and, concomitantly, a weak and broad band developed at longer wavelengths, obviously because of the aggregation of Ag nanoparticles. At the same time, the Raman scattering peaks of 4-ABT varied in intensity as the Ag particles proceeded to form aggregates. A close examination revealed that the peak intensity of the ring 7a band of 4-ABT, a typical a(1) vibrational mode, could be correlated with the UV-vis extinction of the Ag sol measured at the excitation laser wavelength. In a separate Raman measurement conducted using sedimented Ag colloidal particles, 4-ABT was found not to be subjected to any surface-induced photoreaction, implying that all of the observable Raman peaks were, in fact, solely due to 4-ABT on Ag. The intensities of the b(2)-type bands, such as the ring 3, 9b, and 19b modes of 4-ABT, were then analyzed and found to be invariant with respect to the 7a band, irrespective of the extent of Ag aggregation as far as at a fixed excitation wavelength. The intensity ratio of the b(2)-type/7a bands would then reflect the extent of the chemical enhancement that was involved in the SERS of 4-ABT in aggregated Ag sol.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag/Au nanoparticle and macroscopically smooth Au substrate

Raman scattering measurements were conducted for a 4-aminobenzenethiol (4-ABT) monolayer assembled on a macroscopically smooth Au substrate. Although no peak was detected at the beginning, Raman peaks were distinctly observed by attaching Ag or Au nanoparticles onto the 4-ABT monolayer (Ag(Au)@4-ABT/Au(flat)). Considering the fact that no Raman signal is observed when Ag (Au) nanoparticles are adsorbed on a (4-aminophenyl)silane monolayer assembled on a silicon wafer, the Raman spectrum observed for Ag(Au)@4-ABT/Au(flat) must be a surface-enhanced Raman scattering (SERS) spectrum, derived from the electromagnetic coupling of the localized surface plasmon of Ag (Au) nanoparticles with the surface plasmon polariton of the underneath Au metal. The electromagnetic coupling responsible for SERS appeared to be governed more by the bulk Au substrate than the sparsely distributed Ag or Au nanoparticles. The chemical enhancement appeared on the other hand to be derived more from the formation of Au-S bonds than any charge-transfer interaction between the protonated amine group and the Au or Ag nanoparticles. The enhancement factors derived from the attachment of a single Ag or Au nanoparticle onto 4-ABT on Au were estimated to be as large as 8.3 x 10(5) and 5.0 x 10(5), respectively, (for the ring 3 band (b(2)) near 1390 cm(-1)) in which a factor of approximately 10(2) was presumed to be due to the chemical effect, with the remaining contributed by the electromagnetic effect.     

Experimental and theoretical surface enhanced Raman scattering study of 2-amino-4-methylbenzothiazole adsorbed on colloidal silver particles

The adsorption of 2-amino-4-methylbenzothiazole (2-AMBT) on colloidal silver particles has been investigated by a surface enhanced Raman scattering (SERS) study. The SERS spectra of the 2-AMBT molecule at varied adsorbate concentrations recorded in different time domains are compared with its Fourier transform infrared (FTIR) spectrum and normal Raman spectrum (NRS) in the bulk and in solution. The experimentally observed SERS spectra are compared with the theoretically modeled surface complexes using ab initio restricted Hatree-Fock (RHF) and density functional theory (DFT) calculations. The most favorable adsorptive sites of the 2-AMBT molecule have been estimated by natural population analysis (NPA) using the above-mentioned high level of theories. The enhancement of the in-plane modes together with the appearance of Ag-N stretching frequency at 215 cm(-1) indicates that the 2-AMBT molecule is adsorbed on the silver surface through the lone pair electrons of both nitrogen atoms with the molecular plane nearly vertical to the surface.     

Effect of volatile organic chemicals on surface-enhanced Raman scattering of 4-aminobenzenethiol on Ag: comparison with the potential dependence

4-Aminobenzenethiol (4-ABT) is an unusual molecule in the sense that several distinct peaks whose counterparts are rarely found in the normal Raman spectrum are observed in its surface-enhanced Raman scattering (SERS) spectra. Their origin has been argued over recently as due to either a metal-to-adsorbate charge transfer or the formation of a photoreaction product such as dimercaptoazobenzene (DMAB). In an electrochemical SERS measurement, the intensities of the new peaks depended strongly not only on the excitation wavelength but also on the electrode potential. Interestingly, we observed a similar spectral variation even under ambient conditions by exposure of 4-ABT on Ag to volatile organic chemicals (VOCs) such as acetone and ammonia. Since acetone and ammonia barely react directly with 4-ABT, the effect of VOCs must be indirect, presumably associated with the movement of electrons between VOCs and the Ag substrate causing either an increase or a decrease in the surface potential of Ag. Based on the potential-dependent SERS data, the effect of acetone therefore appeared to correspond to an application of +0.15 V to the Ag substrate vs. a saturated Ag/AgCl electrode, while the effect of ammonia corresponded to the application of -0.45 V to Ag. We admit that much the same VOC effect could be observable if a photoproduct was formed immediately upon irradiation and the product was also subjected to a chemical enhancement mechanism. The Gaussian response of the peak intensities of the b(2)-type bands to applied potential, as well as to VOCs, dictated that the new peaks appearing in the SERS of 4-ABT have nothing to do with any electrochemical reaction. In addition, a separate preliminary work suggested that the b(2)-type bands are not at least due to a photoreaction product such as DMAB.     

Raman and surface enhanced Raman microscopy of microstructured polyethylenimine/DNA multilayers

We analyze microstructured multilayer films of poly(ethyleneimine) (PEI) and DNA by employing Raman and surface enhanced Raman spectroscopy (SERS). The microstructuring of the samples allows a simultaneous measurement of signal and reference in a single analytic process. Silver nanoparticles are implemented in the microstructured multilayers for SERS measurements. The recorded SERS spectra of PEI/DNA are dominated by the Raman bands of the DNA bases which show a larger mean enhancement than bands belonging to DNA backbone vibrations. Our results show that the combination of SERS and microstructured multilayer films provides an adapted way to characterize the polyelectrolytes as well as to measure the enhancement factor and the distance dependence for the SERS active silver nanoparticles. Furthermore, microstructured polyelectrolyte films containing SERS active nanoparticles are used for sensing molecules.     

Surface Enhanced Raman Scattering Sensing with Nanostructures Fabricated by Soft Nanolithography

The nanospike structures formed with femtosecond laser irradiations have been successfully replicated on the surface of a polyurethane (PU) polymer using a low cost soft nanolithography method. The surface enhanced Raman scattering (SERS) of rhodamine 6G (Rh6G) and dinitrotoluene (DNT) molecules have been measured with silver coated PU nanospike surfaces by a simple portable Raman spectrometer. Compared to a flat silver coated surface, where no Raman Scattering of the molecules can be detected by the simple portable Raman spectrometer, the Raman spectra are enhanced by more than 4 orders of magnitudes. This indicates that the high area/volume ratio and small size of the PU nanospikes can be used for SERS sensing.     

Surface-enhanced raman spectra of dyes and organic acids in silver solutions: chloride ion effect

We have recorded surface-enhanced Raman (SER) spectra of two different classes of compounds, cationic dyes and organic acids, and studied their chloride ion effects on the surface-enhanced Raman scattering (SERS) activities of the silver solution. For the positive charge dyes, rhodamine 6G (R6G) and 1,1'-dimethyl-2,2'-cyanine iodide (DECI), no SERS could be observed without the addition of chloride ions because of lack of the electrostatic interaction between the dye species and the silver particles in the silver solution. The chloride ions served to enlarge silver particles and to contribute the existence of the surface active sites, making the silver solution SERS active to the dye samples. Surface-enhanced resonance Raman scattering (SERRS) intensity of the dye molecules increased with the chloride ion concentration. After reaching a maximum intensity, a Cl- quenching effect on the intensity took place. For the organic acids, benzoic acid and p-aminobenzoic acid (PABA), SERS could be observed without the coexistence of chloride ions. The intensity of the Raman scattering did not vary significantly in the presence of small amount of chloride ion. At high Cl- concentration, quenching SERS intensity began to take effect.     

Surface-enhanced Raman scattering system of sample molecules in silver-modified silver film

Surface-enhanced Raman scattering (SERS) spectrum of very good quality of "silver nano-particles/sample molecules/silver film" system was reported by nesting the sample molecules to the gap of silver nano-particles and silver film, indicating that "silver nano-particles/sample molecules/silver film" is a highly SERS-active system. Not only was the number of the vibrational modes increased, but also were the frequencies of Raman bands up and down shifted. It is difficult to separate the contributions of the electromagnetic and chemical mechanisms to the great enhancement of the Raman signal. The shift by 5-30cm(-1) of the SERS bands and the change in their relative intensity compared with the ordinary Raman spectrum indicate the chemisorption of the sample molecules on the silver-modified silver surface. Furthermore, the silver nano-particles modified on the rough silver film surface play an important role in magnifying the surface local electric field near the silver surface through resonant surface plasmon excitation. From the rich information, obtained from high-quality SERS of PHBA in ternary system, we inferred that PHBA molecules in ternary system adsorb onto the metal surfaces through carboxyl at a perpendicular orientation.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag nanoparticle and macroscopically smooth Au substrate: effects of size of Ag nanoparticles and the excitation wavelength

A nanogap formed by a metal nanoparticle and a flat metal substrate is one kind of "hot site" for surface-enhanced Raman scattering (SERS). Accordingly, although no Raman signal is observable when 4-aminobenzenethiol (4-ABT), for instance, is self-assembled on a flat Au substrate, a distinct spectrum is obtained when Ag or Au nanoparticles are adsorbed on the pendent amine groups of 4-ABT. This is definitely due to the electromagnetic coupling between the localized surface plasmon of Ag or Au nanoparticle with the surface plasmon polariton of the planar Au substrate, allowing an intense electric field to be induced in the gap even by visible light. To appreciate the Raman scattering enhancement and also to seek the optimal condition for SERS at the nanogap, we have thoroughly examined the size effect of Ag nanoparticles, along with the excitation wavelength dependence, by assembling 4-ABT between planar Au and a variable-size Ag nanoparticle (from 20- to 80-nm in diameter). Regarding the size dependence, a higher Raman signal was observed when larger Ag nanoparticles were attached onto 4-ABT, irrespective of the excitation wavelength. Regarding the excitation wavelength, the highest Raman signal was measured at 568 nm excitation, slightly larger than that at 632.8 nm excitation. The Raman signal measured at 514.5 and 488 nm excitation was an order of magnitude weaker than that at 568 nm excitation, in agreement with the finite-difference time domain simulation. It is noteworthy that placing an Au nanoparticle on 4-ABT, instead of an Ag nanoparticle, the enhancement at the 568 nm excitation was several tens of times weaker than that at the 632.8 nm excitation, suggesting the importance of the localized surface plasmon resonance of the Ag nanoparticles for an effective coupling with the surface plasmon polariton of the planar Au substrate to induce a very intense electric field at the nanogap.     

Magnetic field induced aggregation of nanoparticles for sensitive molecular detection

A molecular detection method utilizing the magnetically induced aggregation of silver nanoparticle (NP)-embedded silica NPs for SERS activation is described. Here, silver embedded magnetic NPs (Ag-M-dots) composed of a magnetic core and silica shells, on whose surface silver NPs were formed, were used. Because the magnetic field induced aggregated Ag-M-dots exhibit a strong SERS signal compared to the dispersed Ag-M-dots, the system allows for the detection of adsorbed Raman label compound even at the 100 fM level. Adenine was tested as a model biocompound and its Raman spectrum could be observed at concentrations as low as 1 pM. The experimental results were supported by the theoretical calculations.     

对氯硝基苯吸附在银纳米粒子上的偶联反应

表面增强拉曼光谱(SERS)具有极高的检测灵敏度, 通过检测吸附分子的SERS信号, 可以获得表面吸附分子的结构以及可能发生的反应. 在拉曼激发光源的辐射下, 在碱性溶液中, 银纳米粒子表面吸附的对氯硝基苯(PCNB)的SERS光谱与其固体的常规拉曼光谱相比, 出现异常SERS谱. 通过采用密度泛函理论(DFT)计算, 对PCNB以及可能的偶联产物p,p''-二氯偶氮苯(DCAB)进行理论分析以及谱峰归属, 发现这些异常峰来自其偶联产物DCAB的偶氮C－N＝N－C基团的基频振动.     

Nanoparticle-mirror sandwich substrates for surface-enhanced Raman scattering

Sandwich surface-enhanced Raman scattering (SERS) substrates (3S) utilizing coupling between continuous metal films and plasmonic particles were fabricated using silver mirrors, electrochemically roughened films, and various sizes of silver nanoparticles. The effect of excitation wavelength and nanoparticle size on SERS spectra of poly(vinylpyridine), selected as a model compound, was studied to determine the optimum conditions for the strongest SERS signal. The Raman enhancement resulted from the plasmon coupling of silver nanoparticles to the underlying continuous film as well as the lateral plasmon coupling between the silver nanoparticles. The formation of the charge transfer complex was also observed. The 3S configuration was used to obtain SERS spectra of dipicolinic acid (DPA), a chemical signature for Bacillus anthracis.     

Surface-enhanced Raman spectra of rhodamine 19 octadecylamide

Surface-enhanced Raman scattering (SERS) of the cationic and the neutral form of rhodamine 19 octadecylamide (R19OA) has been studied in the silver citrate colloid using NIR excitation at 1064 nm. Cationic molecules readily adsorb onto negatively charged silver nanoparticles through a positively charged xanthene part of the molecules resulting in surface enhancement of Raman scattering. Due to a lack of the positive charge in molecular structure, SERS spectrum of neutral molecules is not observed. Nevertheless, a broad band appearing at 1240 cm^?1 in the spectrum of the cationic form indicates conversion of the cationic into the neutral species occurring close to the silver surface. The observed band most likely arises from a vibration of the ring formed in the molecular structure after conversion, but before complete desorption of the neutral molecules from the metal surface. Upon addition of HCl and NaOH in the silver sol, equilibrium is shifted toward the cationic and the neutral form of R19OA, respectively, followed by corresponding changes in the Raman spectrum. In addition, FT-SERS spectra of two rhodamine dyes, rhodamine 19 (R19) and rhodamine 6G (R6G), that are structurally related to R19OA, have been studied under the same experimental conditions for comparison.     

Surface-enhanced vibrational investigation of adsorbed analgesics

Adsorption properties of acetylsalicylic acid (AA), ibuprofen and acetaminophen deposited from volatile solvents with varying protic/aprotic properties on vacuum-evaporated silver films were characterized using surface-enhanced infrared absorption (SEIRA) and surface-enhanced Raman spectroscopy (SERS). SERS preferentially enhances monolayer Raman shifts, while SEIRA can enhance the infrared absorbance of the monolayer and multilayers. To our best knowledge, this is the first reported study of these molecules using a combination of SERS/SEIRA. SERS revealed that AA and ibuprofen adsorbed ionically in monolayers, independent of the deposition solvents used in the process. SEIRA experiments showed that AA multilayers condensed molecularly using a deposition solvent with polar bonds. However, when an alkane deposition solvent with non-polar bonds such as n-heptane was used, AA adsorbed as acetylsalicylate ions in the first few multilayers, while ibuprofen always adsorbed as the free acid in the multilayer. These ionization trends depend upon the affinity of AA and ibuprofen for the underlying silver film. TPD experiments on silver powders further demonstrated that ibuprofen affinity for silver was less than AA. Furthermore, SEIRA indicated that acetaminophen adsorbed as multilayers of metastable polymorphs using protic or polar aprotic deposition solvents. Protic deposition solvents gave higher quality SERS spectra of an acetaminophen monolayer in comparison to polar aprotic deposition solvents. Such studies could find significant applications in biochemical and nanotechnology processes such as drug delivery, catalysis, and tissue engineering and will contribute to the understanding of the impact and fate of analgesics released into the environment.