Evaluation of the enantiomeric resolution of 7,8-dihydroxy-7,8-dihydrobenzo[a]-pyrene and its 6-fluoro and 6-bromo derivatives on polysaccharide-derived stationary phases

The enantiomeric resolution and the elution order of (+/-)-trans-7,8-dihydrodiols of benzo[a]pyrene and its 6-fluoro and 6-bromo derivatives were analyzed on three polysaccharide-based columns: Daicel Chiralcel CA-I (cellulose triacetate), OF, and OG [cellulose tris(4-chloro- and 4-methylphenylcarbamate)]. For comparison, the separation of (+/-)-1,1'-bi-2-naphthol was evaluated on the OG and OF columns. Possibly similar interactions of (S)-1,1'-bi-2-naphthol and (7S,8S)-isomers of 6-halo-7,8-dihydroxy-7,8-dihydrobenzo[a]pyrene with the chiral sorbent are suggested.     

Highly sensitive routine method for urinary 3-hydroxybenzo[a]pyrene quantitation using liquid chromatography-fluorescence detection and automated off-line solid phase extraction

Many workers and also the general population are exposed to polycyclic aromatic hydrocarbons (PAHs), and benzo[a]pyrene (BaP) was recently classified as carcinogenic for humans (group 1) by the International Agency for Research on Cancer. Biomonitoring of PAHs exposure is usually performed by urinary 1-hydroxypyrene (1-OHP) analysis. 1-OHP is a metabolite of pyrene, a non-carcinogenic PAH. In this work, we developed a very simple but highly sensitive analytical method of quantifying one urinary metabolite of BaP, 3-hydroxybenzo[a]pyrene (3-OHBaP), to evaluate carcinogenic PAHs exposure. After hydrolysis of 10 mL urine for two hours and concentration by automated off-line solid phase extraction, the sample was injected in a column-switching high-performance liquid chromatography fluorescence detection system. The limit of quantification was 0.2 pmol L(-1) (0.05 ng L(-1)) and the limit of detection was estimated at 0.07 pmol L(-1) (0.02 ng L(-1)). Linearity was established for 3-OHBaP concentrations ranging from 0.4 to 74.5 pmol L(-1) (0.1 to 20 ng L(-1)). Relative within-day standard deviation was less than 3% and relative between-day standard deviation was less than 4%. In non-occupationally exposed subjects, median concentrations for smokers compared with non-smokers were 3.5 times higher for 1-OHP (p<0.001) and 2 times higher for 3-OHBaP (p<0.05). The two urinary biomarkers were correlated in smokers (ρ=0.636; p<0.05; n=10) but not in non-smokers (ρ=0.09; p>0.05; n=21).     

Sensitive and selective determination of metabolically formed trans-dihydrodiols and phenols of benzo[a]pyrene in water and urine samples by HPLC with amperometric detection

A method has been developed to separate hydroxylated metabolites of the carcinogenic polycyclic aromatic hydrocarbon benzo[a]pyrene, i. e. trans-4,5-, 7,8-, 9,10-dihydrodiol and 1-, 3-, 7-, and 9-phenol, by HPLC with amperometric detection employing an isocratic methanol/water eluent (70:30, v/v) containing 0.5 g/L sulfuric acid and 1 g/L lithium perchlorate. Compared with the usually applied fluorescence (λ_ex = 265 nm, λ_em = 460 nm) and ultraviolet (λ = 265 nm) detection, the amperometric technique is about 2–12 times more sensitive for the determination of all metabolites investigated. The method was applied to the determination of the seven metabolites of benzo[a]pyrene in different water samples and in urine after solid-phase extraction (SPE). The results obtained by HPLC with amperometric detection after SPE enrichment from an aqueous extract of a soil sample and from the urine of a rat intragastrically treated with benzo[a]pyrene agreed well with the values determined with fluorescence and/or UV detection.     

Sensitive and selective determination of metabolically formed trans-dihydrodiols and phenols of benzo[a]pyrene in water and urine samples by HPLC with amperometric detection

A method has been developed to separate hydroxylated metabolites of the carcinogenic polycyclic aromatic hydrocarbon benzo[a]pyrene, i. e. trans-4,5-, 7,8-, 9,10-dihydrodiol and 1-, 3-, 7-, and 9-phenol, by HPLC with amperometric detection employing an isocratic methanol/water eluent (70:30, v/v) containing 0.5 g/L sulfuric acid and 1 g/L lithium perchlorate. Compared with the usually applied fluorescence (λ_ex = 265 nm, λ_em = 460 nm) and ultraviolet (λ = 265 nm) detection, the amperometric technique is about 2–12 times more sensitive for the determination of all metabolites investigated. The method was applied to the determination of the seven metabolites of benzo[a]pyrene in different water samples and in urine after solid-phase extraction (SPE). The results obtained by HPLC with amperometric detection after SPE enrichment from an aqueous extract of a soil sample and from the urine of a rat intragastrically treated with benzo[a]pyrene agreed well with the values determined with fluorescence and/or UV detection. Received: 20 December 1996 / Revised: 10 March 1997 / Accepted: 30 April 1997     

Quantification of monohydroxy-PAH metabolites in urine by solid-phase extraction with isotope dilution-GC–MS

For measurement of biomarkers from polycyclic aromatic hydrocarbon (PAH) exposure, an analytical method is described quantifying hydroxylated PAH (OH-PAH) in urine samples. This method determined monohydroxy metabolites of naphthalene, fluorene, phenanthrene, fluoranthene, pyrene, chrysene, benzo[c]phenanthrene, and benz[a]anthracene. The sample preparation consisted of enzymatic hydrolysis, solid-phase extraction and derivatization with a silylating reagent. Five carbon-13 labeled standards were used for isotope dilution. Analytes were separated by gas chromatography (GC) and quantified with high-resolution mass spectrometry (HRMS). This method produced good recoveries (41-70%), linearity, and specificity. Data were corrected for blank levels from the naphthalene, fluorene, and phenanthrene metabolites. Method detection limits ranged from 2 ng L(-1) for 1-hydroxypyrene to 43.5 ng L(-1) for 1-hydroxynaphthalene. Using quality control charts from two urine pools, the method can be readily applied to biomonitoring PAH exposure.     

Gas chromatographic-mass spectrometric analysis of diols and tetrols from reactions of polycyclic aromatic hydrocarbon epoxides with hemoglobin

We have evaluated both electron ionization (EI) and negative-ion chemical ionization (NICI) methods for the analysis of trimethylsilyl derivatives of a series of polycyclic aromatic hydrocarbon (PAH) alcohols including styrene diol, benzo[e]pyrene diol and tetrols, cyclopenta[c,d]pyrene diols, benzo[a]pyrene-4,5-diols, chrysene tetrols, benz[a]anthracene tetrols I and II, and syn- and anti-benzo[a]pyrene tetrols. NICI is the more sensitive method for all compounds except styrene diol. Detection limits are compound-dependent and range from 1 fmol for cyclopenta[c,d]pyrene diol to 1 pmol for benzo[e]pyrene diol. The EI detection limit for styrene diol is 60 fmol. PAH alcohols related to the compounds listed above were observed following hydrolysis of hemoglobin which had been reacted with PAH epoxides in vitro. Benzo[a]pyrene tetrols and a chrysene tetrol were observed following hydrolysis of hemoglobin isolated from human smokers' blood. Hydrolysis of styrene oxide treated hemoglobin in 18O-labeled water revealed at least two mechanisms of ester hydrolysis, including the BAL 1 pathway.     

高效液相色谱法测定生活饮用水中的苯并[a]芘

建立高效液相色谱二极管阵列检测器检测生活饮用水苯并[a]芘的测定方法。采用C18反相色谱柱(150mm×4.6 mm,5μm),在流动相为甲醇–水(体积比为90∶10)、流量1.0 mL/min、检测波长295 nm、柱温35℃、进样体积20μL的条件下测定生活饮用水中苯并[a]芘。该方法检出限为6 ng/L,线性范围0～100 ng/mL,加标回收率为88.1%～93.4%,测定结果的相对标准偏差为1.06%(n=9)。该法样品预处理简单,分离度高,分析时间短,适用于生活饮用水中苯并[a]芘的准确定性定量测定。     

Solvent-free synthesis of benzo[a]pyrene 7,8-diol 9,10-epoxide adducts at the N(2)-position of deoxyguanosine

[reaction: see text] The first solid-state (or solvent-free) synthesis of protected deoxyguanosine (dG) adducts of benzo[a]pyrene diol epoxides at room temperature is reported. Whereas dG adducts derived from cis- and trans-opening of (+/-)-7beta,8alpha-dihydroxy-9beta,10beta-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (DE-1 1) are formed as a 1:1 mixture, the direct opening of the diastereomeric (+/-)-7beta,8alpha-dihydroxy-9alpha,10alpha-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (DE-2, 2) produced a 15:85 ratio favoring the trans-opened dG adduct 7.     

Simultaneous analysis of four stereoisomers of anti-benzo[a]pyrene diol epoxide-deoxyguanosine adducts in short oligodeoxynucleotides using reversed-phase high-performance liquid chromatography

anti-Benzo[a]pyrene-7,8-dihydrodiol-9,10-epoxide (anti-BPDE), a reactive metabolite of the environmental carcinogen benzo[a]pyrene, predominantly binds to deoxyguanine in DNA and forms four stereoisomeric adducts. Here we developed an improved method for simultaneous analysis and purification of four stereoisomeric adducts in short oligonucleotides using reversed-phase high-performance liquid chromatography, providing a selection strategy of stationary phase for analysis and separation of polyaromatic hydrocarbon-DNA adducts. This work demonstrates that secondary retention of oligonucleotides on C18 stationary phases induced by exposed silanol heavily affects the separation of four stereoisomeric adducts on C18 stationary phases, and the silicone polymer monolayer coating for completely capping exposed silica or silanol greatly reduces such secondary retention, thereby displaying a much better resolution of the four stereoisomeric adducts. We further demonstrate that aromatic group (phenyl)-based stationary phase can significantly improve stereoisomeric separation of four anti-BPDE-deoxyguanosine (dG) adducts in short oligonucleotides over nonaromatic C18 stationary phase due to enhancement of the selective interaction with aromatic anti-BPDE moiety in oligonucleotides. The developed method was also used for purification and preparation of anti-BPDE-oligonucleotide adducts.     

ENHANCED GROWTH AND EXPERIMENTAL METASTASIS OF CHEMICALLY INDUCED TUMOR IN ULTRAVIOLET IRRADIATED SYNGENEIC MICE

Abstract— Recent studies have shown that ultraviolet (UV) irradiation induces a systemic effect which enhances subsequent tumor induction by benzo[a]pyrene in a manner which is dependent on the dose of benzo[a]pyrene. The present study was designed to test whether UV-B irradiation renders mice susceptible to subcutaneous or intravenous injection of a regressor tumor induced by benzo[a]pyrene. The sources of UV-B irradiation were banks of 6 Westinghouse FS-40 sunlamps, situated 20 cm above the mouse cages. Female BALB/cAnNHsd received five 30-min dorsal UV-B radiation treatments per week for 12 weeks, resulting in a total dose of approx. 6.4 × 10⁵ J m^-2. Two to seven days after termination of UV treatments, syngeneic regressor tumor cells (BP2) induced by benzo[a]pyrene were injected subcutaneously or intravenously into irradiated mice and unirradiated controls. By 38 days post subcutaneous implantation, 24/30 and 3/30 BP2 implants were detectable in the irradiated and unirradiated mice, respectively. Ultraviolet irradiated mice were also unable to reject lung colonies resulting from intravenous administration of BP2 cells, although they were rejected by unirradiated mice. The mean number of lung colonies per mouse was 16- to 35-fold greater in UV irradiated mice than in unirradiated controls, at 14 to 17 days post injection. Thus, UV irradiation rendered mice, with no known exposure to benzo[a]pyrene, susceptible to a subcutaneous or intravenous injection of a regressor tumor induced by benzo[a]pyrene.     

Collection and analytical characterisation of the atmospheric particulate in the city of Bari

In this paper an application of new procedures for atmospheric particulate analysis is illustrated. PM10, PAHs (benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[j]fluoranthene (BjF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1, 2, 3-cd]pyrene (Ip), dibenzo[a, h]anthracene (DbA)) and heavy metals (Cu, Ni, Zn, Co, Mn, Cd, Fe and Pb) were investigated. PM10 determination was performed by gravimetric method, PAHs were measured by GC-MS, and heavy metals by HPIC. An air quality monitoring campaign on the territory of Bari municipality has been organised, and its results are shown.     

Quantitative analysis of 3‐OHB[a]P and (+)‐anti‐BPDE as biomarkers of B[a]P exposure in rats

The aim of this study was to develop an analytical method for the determination the levels of metabolites of benzo[a]pyrene (B[a]P), 3‐hydroxybenzo(a)pyrene (3‐OHB[a]P) and (+)‐anti‐benzo(a)pyrene diol‐epoxide [(+)‐anti‐BPDE, combined with DNA to form adducts], in rat blood and tissues exposed to B[a]P exposure by high‐performance liquid chromatography with fluorescence detection (HPLC/FD), and to investigate the usefulness of 3‐OHB[a]P and (+)‐anti‐BPDE as markers of intragastrical exposure to B[a]P in rats. The levels of 3‐OH‐B[a]P and B[a]P‐tetrol I‐1 released after acid hydrolysis of (+)‐anti‐BPDE in the samples were measured by HPLC/FD. The calibration curves were linear (r² > 0.9904), and the lower limit of quantification ranged from 0.34 to 0.45 ng/mL for 3‐OHB[a]P and from 0.43 to 0.58 ng/mL for (+)‐anti‐BPDE. The intra‐ and inter‐day stability assay data suggested that the method is accurate and precise. The recoveries of 3‐OHB[a]P and (+)‐anti‐BPDE were in the ranges of 73.6 ± 5.0 to 116.5 ± 6.3% and 73.3 ± 8.5 to 141.2 ± 13.8%, respectively. A positive correlation was found between the concentration of intragastrical B[a]P and the concentrations of 3‐OH‐B[a]P and (+)‐anti‐BPDE in the blood and in most of the tissues studied, except for the brain and kidney, which showed no correlation between B[a]P and 3‐OHB[a]P and between B[a]P and (+)‐anti‐BPDE, respectively. A sensitive, reliable and rapid HPLC/FD was developed and validated for analysis of 3‐OHB[a]P and (+)‐anti‐BPDE in rat blood and tissues. There was a positive correlation between the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the blood and the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the most other tissues examined. The concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the blood could be used as an indicator of the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the other tissues in response to B[a]P exposure. These results demonstrate that 3‐OHB[a]P and (+)‐anti‐BPDE are potential biomarkers of B[a]P exposure, which would also be useful to assess the carcinogenic risks from B[a]P exposure. Copyright © 2015 John Wiley & Sons, Ltd.     

Quantification of benzo[a]pyrene diol epoxide DNA-adducts by stable isotope dilution liquid chromatography/tandem mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants found in car exhausts, charbroiled food, and tobacco smoke. Three pathways for the metabolic activation of B[a]P to ultimate carcinogens have been proposed. The most widely accepted pathway involves cytochrome-P450 (CYP) 1A1- and/or 1B1-mediated formation of B[a]P-7,8-oxide, which undergoes epoxide hydrolase-mediated metabolism to the proximate carcinogen B[a]P-7,8-dihydro-7,8-diol. Further CYP1A1- and/or CYP1B1-mediated activation of the dihydrodiol results in the formation of 7,8-dihydroxy-9,10-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (B[a]PDE), the ultimate carcinogen. In previous studies, it was demonstrated that (+)-anti-B[a]PDE was the most potent tumorigen of the CYP-derived B[a]PDE diastereomers. We have developed a stable isotope dilution, liquid chromatography multiple reaction monitoring/mass spectrometry (LC-MRM/MS) assay for all eight (+/-)-anti-B[a]PDE-derived dGuo and dAdo DNA-adducts. The LC-MRM/MS assay was rigorously validated and used to show that (+)-anti-trans-B[a]PDE-dGuo was the major adduct formed when naked DNA and human bronchoalveolar adenocarcinoma H358 cells were treated with (+/-)-anti-B[a]PDE. The preference for DNA-adducts derived from (+)-anti-B[a]PDE was even more apparent in cellular DNA. Thus, the increased potency of (+)-anti-B[a]PDE as a tumorigen is most likely due its ability to preferentially form DNA-adducts when compared with (-)-anti-B[a]PDE. Also, the adduct profile suggests that this occurs by binding of (+)-anti-B[a]PDE to DNA in a manner that facilitates covalent binding to dGuo rather than dAdo residues.     

Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

Aromatic hydrocarbon metabolites in fish: automated extraction and high-performance liquid chromatographic separation into conjugate and non-conjugate fractions

An automated extractor-concentrator was used to extract metabolites of naphthalene, 2,6-dimethylnaphthalene, and benzo[a]pyrene from serum, bile and liver homogenate of rainbow trout (Salmo gairdneri). The extracts were analyzed by reversed-phase high-performance liquid chromatography (HPLC) with fluorescence detection. Recoveries of naphthalene and 2,6-dimethylnaphthalene metabolites from all matrices were generally greater than 90%; however, the recoveries of benzo[a]pyrene metabolites from serum ranged from 37-99%. In addition, conjugated metabolites of polycyclic aromatic hydrocarbons (PAHs) were separated from non-conjugated metabolites and parent PAHs by using two diol columns with normal-phase HPLC. The extraction and separation techniques were also applied to isolate metabolites in samples from fish fed 2,6-dimethylnaphthalene.     

Gold nanoparticles deposited capillaries for in-capillary microextraction capillary zone electrophoresis of monohydroxy-polycyclic aromatic hydrocarbons

This article presents the first application of gold nanoparticles deposited capillaries as pre-concentration devices for in-capillary microextraction CZE and their use for the analysis of monohydroxy-polycyclic aromatic hydrocarbons in synthetic urine samples. The successful separation of 1-hydroxypyrene, 9-hydroxyphenanthrene, 3-hydroxybenzo[a]pyrene (3-OHbap), 4-hydroxybenzo[a]pyrene and 5-hydroxybenzo[a]pyrene under a single set of electrophoretic conditions is demonstrated as well as the feasibility to obtain competitive ultraviolet absorption LOD with commercial instrumentation. Enrichment factors ranging from 87 (9-OHphe) to 100 (3-OHbap) made it possible to obtain LOD ranging from 9 ng/mL (9-OHphe and 3-OHbap) to 14 ng/mL (4-hydroxybenzo[a]pyrene).     

Development of a highly sensitive monoclonal antibody based ELISA for detection of benzo[a]pyrene in potable water

In Europe, a limit value of 10 ng L(-1) was set by the European Commission for benzo[a]pyrene (B[a]P) in water intended for human consumption (Council Directive 98/83/EC) and, therefore, sensitive and reliable methods are needed to evaluate its presence. We report here on the development of a highly sensitive indirect competitive ELISA for the detection of B[a]P in potable water. Fourteen monoclonal antibodies were generated in mice using novel B[a]P derivatives. The immunoassay with the least interference and the best sensitivity was optimized and characterized. As co-solvent, ten percent methanol (v/v) was determined as the optimum concentration for B[a]P solubilization for use with the developed ELISA. With the purified antibody (clone 22F12) the average IC50 for B[a]P and corresponding detection limit at a signal:noise (S/N) ratio of 3 was 65 ng L(-1) and 24 ng L(-1), respectively. From the 16 EPA-designated PAHs, only chrysene, indeno[1,2,3-cd]pyrene, and benzo[b]fluoranthene showed a cross-reactivity (CR) higher than 20%. No CR was observed for two- and three-ringed aromatics as well as dibenz[ah]anthracene and benzo[ghi]perylene. The effect of pH value (range 6.5-9.5), ionic strength (specific electric conductivity 1 microS cm(-1)-2.5 mS cm(-1)), and inorganic ions (sodium, copper, iron, aluminium, manganese, chloride, sulfate, nitrate, and nitrite at maximum permissible levels according to the Council Directive) on both signal and sensitivity of the ELISA was studied. No significant influence of these parameters on the ELISA competition curve was found. We suggest that the optimized ELISA can be used to monitor potable water samples without previous extraction from the samples. The assay should facilitate the cleanup of B[a]P contaminated sites where B[a]P levels fall close to the limit value of the new drinking water directive.     

The Mechanism on Cyclization, Debenzylation and Oxidation of 1-[1-（Benzyloxy）-3-methylnaphthalen-4-yloxy]propan-2-one

Mansonone compounds represent a series of naturally occurring o-quinones mainly isolated from the heartwood of Mansonia Altissima1 and Ulmus Glabra2. Mansonone F contained oxaphenalene skeleton which was a relatively novel structure and rarely existed in …     

Optimization of the matrix solid-phase dispersion sample preparation procedure for analysis of polycyclic aromatic hydrocarbons in soils: comparison with microwave-assisted extraction

A fast and simple preparation procedure based on the matrix solid-phase dispersion (MSPD) technique is proposed for the first time for the isolation of 16 polycyclic aromatic hydrocarbons (PAHs) from soil samples. Naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-c,d]pyrene were considered in the study. Extraction and clean-up of samples were carried out in a single step. The main parameters that affect extraction yield, such as dispersant, type and amount of additives, clean-up co-sorbent and extractive solvent were evaluated and optimized. The addition of an alkali solution in MSPD was required to provide quantitative recoveries. Analytical determinations were carried out by high performance liquid chromatography (HPLC) with fluorescence detection. Quantification limits (between 0.01 and 0.6 ng g(-1) dry mass) were well below the regulatory limits for all the compounds considered. The extraction yields for the different compounds obtained by MSPD were compared with the yields obtained by microwave-assisted extraction (MAE). To test the accuracy of the MSPD technique, the optimized methodology was applied to the analysis of standard reference material BCR-524 (contaminated industrial soil), with excellent results.